|
I.S. EN 3840:2007
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
|
13/30283193 DC : 0
|
BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
|
BS 3900-D11:1998
|
Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
|
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
10/30215721 DC : 0
|
BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
|
ONORM EN 4687 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
BS EN 3021:2017
|
Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
|
BS 3900-A24(2000) : 2000 AMD 13286
|
METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
|
08/30184633 DC : DRAFT SEP 2008
|
BS EN 1871 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
|
BS EN 16074:2011
|
Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
|
PREN 2435-05 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
PREN 3021 : DRAFT 2015
|
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
|
I.S. EN 3021:2017
|
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
|
DIN EN ISO 11890-2:2013-07
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
|
I.S. EN ISO 2808:2007
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
|
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
BS EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
|
BS EN 2436-006:2006
|
Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
|
BS EN ISO 17895:2005
|
Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
|
BS EN ISO 11909:2007
|
Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
|
BS EN ISO 2808:2007
|
Paints and varnishes. Determination of film thickness |
|
ISO 3233-3:2015
|
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
|
EN 12617-2:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
|
EN 12802:2011
|
Road marking materials - Laboratory methods for identification |
|
DIN EN 14879-2:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
|
ISO 3233:1998
|
Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
|
BS EN ISO 14446:2010
|
Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
|
I.S. EN ISO 16000-11:2006
|
INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
|
14/30304007 DC : 0
|
BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
|
DIN EN ISO 3233-1 E : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
|
DIN EN ISO 3233-3 E : 2015
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
|
DIN EN ISO 3233-1:2013-05
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
|
UNE-EN 14188-4:2010
|
Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
|
BS EN 14188-4:2009
|
Joint fillers and sealants Specifications for primers to be used with joint sealants |
|
08/30184630 DC : DRAFT SEP 2008
|
BS EN 12802 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
|
IEC 62899-202:2016
|
Printed electronics - Part 202: Materials - Conductive ink |
|
I.S. EN 4687:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
I.S. EN 16074:2011
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
|
I.S. EN ISO 23811:2009
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
|
I.S. EN 14188-4:2009
|
JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
|
NF EN ISO 14446 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
|
I.S. EN ISO 6504-3:2007
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
|
BS EN ISO 6504-3:2007
|
Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
|
DIN EN 12802:2011-12
|
Road marking materials - Laboratory methods for identification |
|
ISO 16000-11:2006
|
Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
|
UNE-EN ISO 11890-2:2013
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
|
BS EN ISO 11890-1:2007
|
Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
|
EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
|
I.S. EN ISO 11909:2007
|
BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
|
I.S. EN 12802:2011
|
ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
|
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
|
I.S. EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
UNI EN 4687 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
I.S. EN ISO 11890-1:2007
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
|
ONORM EN ISO 11890-2 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
|
EN 4687:2012
|
Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
|
BS 3900-A10:1998
|
Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
|
BS 3900-D11(2007) : 2007
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
|
BS 3900-C5(2007) : 2007
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
|
03/309868 DC : DRAFT AUG 2003
|
PREN ISO/DIS 17895 - PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND (IN-CAN VOC) CONTENT OF WATER-BASED EMULSION PAINTS |
|
09/30205302 DC : 0
|
BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
|
BS EN ISO 3233-1:2013
|
Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
|
17/30336222 DC : 0
|
BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
|
BS IEC 62899-202:2016
|
Printed electronics Materials. Conductive ink |
|
BS 3900-A23(2000) : 2000 AMD 13285
|
METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
|
BS EN ISO 23811:2009
|
Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
|
DIN EN ISO 14446:2011-02
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
|
UNE-EN ISO 3233-3:2015
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014) |
|
UNI EN 16074 : 2011
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
|
08/30180835 DC : DRAFT JUNE 2008
|
BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
|
PREN 2436-06 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
PREN 2434-05 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
I.S. EN ISO 3233-1:2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
|
UNE-EN ISO 14446:2011
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
|
UNI EN 14188-4 : 2009
|
JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
|
UNI EN ISO 3233-1 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE |
|
EN ISO 6504-3:2007
|
Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
|
DIN EN 14879-2 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
|
DIN EN 14879-3 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
|
DIN EN ISO 11890-1:2007-09
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
|
BS EN 13966-1:2003
|
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
|
ISO 17895:2005
|
Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
|
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
|
ISO 6504-3:2006
|
Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
|
UNE-EN ISO 3233-1:2013
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
|
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
|
I.S. EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
|
DIN EN 1504-7:2006-11
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
UNI EN ISO 11890-2 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
|
EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
EN ISO 16000-11:2006
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
|
EN 14188-4:2009
|
Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
|
UNI EN 1504-7 : 2007
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
|
UNI EN 1504-5 : 2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
UNI EN 12802 : 2011
|
ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
|
13/30266799 DC : 0
|
BS EN ISO 3233-3 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL |
|
09/30205299 DC : 0
|
BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
09/30205293 DC : 0
|
BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
|
UNI EN ISO 23811 : 2009
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
|
UNI EN ISO 14446 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
|
03/310937 DC : DRAFT JUNE 2003
|
EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
BS EN ISO 3233-3:2015
|
Paints and varnishes. Determination of the percentage volume of non-volatile matter Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
|
15/30309743 DC : 0
|
BS ISO 19403-3 - PAINTS AND VARNISHES - WETTABILITY - PART 3: DETERMINATION OF THE SURFACE TENSION OF LIQUIDS USING THE PENDANT DROP METHOD |
|
BS 6782-11(1999) : 1999
|
BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION |
|
DIN EN 14188-4:2009-10
|
Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
|
I.S. EN ISO 3233-3:2015
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO/FDIS 3233-3:2014) |
|
PREN 3840 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
|
PREN 4588 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
|
I.S. EN ISO 14446:2010
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
|
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
ONORM EN ISO 3233-1 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
|
DIN EN ISO 11909:2007-05
|
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
|
DIN EN 12617-2:2004-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
BS EN 12802:2011
|
Road marking materials. Laboratory methods for identification |
|
ISO 11890-2:2013
|
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
|
BS EN ISO 11890-2:2013
|
Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
|
BS EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
|
ISO 11909:2007
|
Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
|
UNE-EN 16074:2011
|
Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
|
BS EN 1504-5:2013
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
|
ISO 23811:2009
|
Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
|
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
|
BS EN 2435-005:2006
|
Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
|
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
|
ISO 11890-1:2007
|
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
|
UNE-EN 12802:2012
|
Road marking materials - Laboratory methods for identification |
|
ISO 14446:1999
|
Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
|
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
|
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
|
EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
|
EN ISO 3233-1:2013
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
|
EN ISO 11909:2007
|
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
|
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
|
EN ISO 3233-3:2015
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015) |
|
EN 3840:2007
|
Aerospace series - Paints and varnishes - Technical specification |
|
EN ISO 11890-1:2007
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
|
EN ISO 17895:2005
|
Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
|
EN 2434-005:2006
|
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
|
EN ISO 23811:2009
|
Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009) |
|
EN 2435-005:2006
|
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
|
EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
EN ISO 14446:2010
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
|
EN 16074:2011
|
Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
|
EN 2436-006:2006
|
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
|
EN 13966-1 : 2003
|
DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS |
|
EN 3021:2017
|
Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
|
DIN EN ISO 3233-3:2015-09
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
|
ONORM EN 4689 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
12/30215682 DC : 0
|
BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY |
|
04/30123574 DC : DRAFT OCT 2004
|
EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
|
DIN EN ISO 23811:2009-08
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
|
BS EN 3840:2007
|
Aerospace series. Paints and varnishes. Technical specification |
|
PREN 1504-7 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
02/564964 DC : DRAFT NOV 2002
|
EN 13419-3 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 3: PROCEDURE FOR SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
|
00/103366 DC : DRAFT APR 2000
|
PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
|
DIN EN 16074:2011-09
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
|
15/30327125 DC : 0
|
BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
ISO 3233-1:2013
|
Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
|
DIN EN 1504-7:2015-09 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
DIN EN 13966-1 E : 2003
|
DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS |
|
DIN EN ISO 16000-11:2006-06
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
|
DIN EN ISO 6504-3:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
|
DIN EN ISO 17895:2005-06
|
PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND CONTENT OF LOW-VOC EMULSION PAINTS (IN-CAN VOC) |
|
DIN EN 1504-5:2013-06
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
BS EN 12617-2:2004
|
Products and systems for the protection and repair of concrete structures. Test methods Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
BS EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
|
BS EN ISO 16000-11:2006
|
Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens |
|
BS EN 2434-005 : 2006
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
DIN EN 14879-3:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |