BS EN 62058-11:2010
|
Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
DIN EN 16256-3:2013-03
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE |
CEI EN 62058-11 : 2011
|
ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
ISO 2859-5:2005
|
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
BS ISO 13448-1:2005
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
17/30344317 DC : 0
|
BS ISO 49 AMENDMENT 1 - MALLEABLE CAST IRON FITTINGS THREADED TO ISO 7-1 |
10/30219542 DC : 0
|
BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
BS ISO 13448-2:2004
|
Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
PD CR 13909:2002
|
Identification card systems. Intersector thin flexible cards. Acceptance criteria |
09/30202307 DC : 0
|
BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
BS ISO 3534-2:2006
|
Statistics. Vocabulary and symbols Applied statistics |
BS ISO 6305-2:2007
|
Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
CEI EN 60300-3-2 : 2006
|
DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
ISO 13448-2:2004
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
UNE-ISO 2859-1:2012
|
Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
SAE AS 9138 : 2018
|
AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
17/30333593 DC : 0
|
BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
DIN EN ISO 186:2002-08
|
Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
EN 60300-3-2 : 2005
|
Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
DIN EN ISO 4527:2003-10
|
METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
EN 61193-3:2013
|
Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
BS 6001-0:2006
|
Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes |
BS 6001-0(2017) : 2017
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
DIN ISO 2859-2:1993-04
|
Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985 |
UNI ISO/TR 8550-2 : 2014
|
GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: SAMPLING BY ATTRIBUTES |
UNI ISO 2859-10 : 2007
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
S.R. CR 13909:2000
|
IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA |
03/312758 DC : DRAFT AUG 2003
|
ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
BS ISO 28590:2017
|
Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
05/30135474 DC : DRAFT JUNE 2005
|
BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
BS ISO 28598-1:2017
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
I.S. EN 62058-11:2010
|
ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
UNE-EN 62058-11:2011
|
Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
UNE-ISO 2859-5:2014
|
Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
I.S. EN 61193-3:2013
|
QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
I.S. EN 60300-3-2:2005
|
DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
BS EN ISO 4527:2003
|
Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
IEC 62058-11:2008
|
Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
DIN EN 1783:2003-06
|
MATCHES - PERFORMANCE REQUIREMENTS, SAFETY AND CLASSIFICATION |
I.S. EN ISO 1461:2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
UNI ISO/TR 18532 : 2010
|
Guide to the application of statistical methods for quality and standardization in the industrial sector |
BS 6000:1996
|
Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
ONORM EN ISO 1461 : 2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
BS 6001-2:1993
|
Sampling procedures for inspection by attributes Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
NF EN 62058-11 : 2010
|
ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
BS ISO/TR 12031:2000
|
Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration |
BIS IS 2500-1 : 2000(R2017)
|
SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
07/30167025 DC : 0
|
BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
DIN EN ISO 17668:2016-06
|
ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
BS 6001-0:1996
|
Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system |
BS EN 61193-3:2013
|
Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
PREN 9138 : 200P1
|
AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
I.S. EN 16256-3:2012
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE |
I.S. EN ISO 17668:2016
|
ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
ISO 28598-1:2017
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
UNI ISO 3534-2 : 2014
|
STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
UNI ISO/TR 8550-3 : 2014
|
GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
ISO/TR 8550-1:2007
|
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
ISO/TR 8550-2:2007
|
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Sampling by attributes |
ISO 2859-0:1995
|
Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
ISO 17668:2016
|
Zinc diffusion coatings on ferrous products Sherardizing Specification |
GEIA TA HB 0009 : 2013
|
RELIABILITY PROGRAM HANDBOOK |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 1783:1997/A1:2002
|
MATCHES - PERFORMANCE REQUIREMENTS, SAFETY AND CLASSIFICATION |
UNI EN ISO 1461 : 2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
03/102273 DC : DRAFT MAR 2003
|
BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
NF ISO 2859-1 : 2000 AMD 1 2011
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
I.S. EN 13811:2003
|
SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
04/30110040 DC : DRAFT FEB 2004
|
BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
BS EN ISO 17668:2016
|
Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
UNE-EN 16256-3:2013
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance |
94/110814 DC : DRAFT JAN 1995
|
ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
S.R. CWA 17094-1:2016
|
POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
03/108624 DC : DRAFT JULY 2003
|
IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
BS EN 60300-3-2:2005
|
Dependability management Application guide. Collection of dependability data from the field |
PD ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
07/30168266 DC : 0
|
BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
UNE-ISO 2859-10:2013
|
Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
CR 13909 : 2000
|
IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA |
ISO 2859-10:2006
|
Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
S.R. ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
ISO/TR 8550-3:2007
|
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
ISO/TR 18532:2009
|
Guidance on the application of statistical methods to quality and to industrial standardization |
DIN EN ISO 1461:2009-10
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
DIN EN ISO 186 E : 2002
|
PAPER AND BOARD - SAMPLING TO DETERMINE AVERAGE QUALITY |
IEC 60300-3-2:2004
|
Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
BS EN 1783:1997
|
Matches. Performance requirements, safety and classification |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
IEC 61193-3:2013
|
Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
BS EN ISO 186:2002
|
Paper and board. Sampling to determine average quality |
BS EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
BS EN 13811:2003
|
Sherardizing. Zinc diffusion coatings on ferrous products. Specification |
BS EN 13975:2003
|
Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
EN ISO 17668:2016
|
Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
EN ISO 186 : 2002
|
Paper and board - Sampling to determine average quality (ISO 186:2002) |
EN 16256-3:2012
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance |
EN 13811 : 2003
|
SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
EN 13975:2003
|
Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
EN ISO 17526:2003
|
Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
EN ISO 4527 : 2003
|
METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS - SPECIFICATION AND TEST METHODS (ISO 4527:2003) |
ISO 6305-2:2007
|
Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
14/30256684 DC : 0
|
BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
BS EN 16256-3:2012
|
Pyrotechnic articles. Theatrical pyrotechnic articles Requirements for construction and performance |
UNE-ISO 3534-2:2013
|
Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
ISO/TR 12031:2000
|
Micrographics Inspection of silver-gelatin microforms for evidence of deterioration |
DIN EN ISO 17668 E : 2016
|
ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
BS ISO 28598-2:2017
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
15/30330450 DC : 0
|
BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
ISO 28598-2:2017
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
CSA ISO/TR 10017 : 2003 : R2013
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
CSA ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
00/564528 DC : DRAFT SEP 2000
|
BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS |
UNI ISO/TR 8550-1 : 2014
|
GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
ISO 13448-1:2005
|
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach |
ISO 3534-2:2006
|
Statistics Vocabulary and symbols Part 2: Applied statistics |
ISO 4527:2003
|
Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
ISO 186:2002
|
Paper and board — Sampling to determine average quality |
BS 6001-1(1999) : 1999
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
EN 62058-11:2010
|
Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
DIN EN 13811:2003-08
|
SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS SPECIFICATION |
BS 6001-4:2005
|
Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |