ISO 2896:2001
Current
Current
The latest, up-to-date edition.
Rigid cellular plastics Determination of water absorption
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
12-07-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This International Standard specifies a method for the determination of the water absorption of rigid cellular plastics
by measuring the buoyant force on a test specimen after immersion under a 50 mm head of water for 4 days.
Corrections are specified to take account of any change in volume of the specimen and also to correct for the
volume of water in the cut surface cells of the specimen. The water absorption is expressed as the average, for
several specimens, of the percentage increase in volume relative to the original volume.
The method described is intended for quality control and for use in product specifications.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 2896 : 2001 | Identical |
| DIN ISO 2896:1999-11 | Identical |
| DIN 53433:1983-07 | Similar to |
| UNE-EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| ISO 20394:2007 | Thermal-insulating materials Determination of freeze-thaw resistance |
| ISO 12215-2:2002 | Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials |
| 04/30085219 DC : DRAFT SEP 2004 | BS 8435 - SMALL CRAFT - RESERVE FLOTATION - BOATS UP TO 6 METRES LENGTH OF HULL |
| ISO 21844:2018 | Cellular plastic — Cellulose foam thermal insulation — Material specification |
| DIN EN ISO 12217-2:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| I.S. EN ISO 12215-2:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 12215-2:2002 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ISO 7214:2012 | Cellular plastics — Polyethylene — Methods of test |
| DIN EN ISO 12215-2:2002-09 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| DEFSTAN 02-803/2(2015) : 2015 | REQUIREMENTS FOR POLYMER FOAMS FOR THERMAL INSULATION |
| DEFSTAN 02-803/1(2010) : 2010 | REQUIREMENTS FOR POLYMER FOAMS FOR THERMAL INSULATION |
| 05/30129203 DC : DRAFT FEB 2005 | ISO/DIS 12575-1 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 1: SPECIFICATION |
| ISO 12575-1:2012 | Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material specification |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| 97/719524 DC : DRAFT NOV 1997 | ISO/CD 12217-1.2 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OVER 6 M LENGTH OF HULL |
| 05/30136084 DC : DRAFT JUL 2005 | ISO 12575-3 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 3: TEST METHODS |
| BS EN ISO 12217-3:2017 | Small craft. Stability and buoyancy assessment and categorization Boats of hull length less than 6 m |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
| ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
| DIN EN ISO 7214:2012-07 | Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012) |
| I.S. EN ISO 7214:2012 | CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST (ISO 7214:2012) |
| 05/30141308 DC : DRAFT NOV 2005 | ISO 20394 - RIGID CELLULAR PLASTICS - DETERMINATION OF FREEZE-THAW RESISTANCE |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| BS 8435:2005 | Small craft. Reserve flotation. Boats up to six metres length of hull |
| NES 803 PT 1 : ISSUE 2 AMD 2 | REQUIREMENTS FOR PLASTIC FOAM THERMAL INSULATION MATERIAL: PLASTIC FOAM PRODUCTS - RIGID PLASTIC FOAM INSULATION SLABS CUT AND MOULDED SECTION |
| ISO 4898:2010 | Rigid cellular plastics Thermal insulation products for buildings Specifications |
| EEMUA 147 : 2016 | RECOMMENDATIONS FOR REFRIGERATED LIQUEFIED GAS STORAGE TANKS |
| UNI EN ISO 7214 : 2012 | CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST |
| ASTM D 4170 : 2016 : REDLINE | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| UNE-EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| DIN EN ISO 12217-1:2016-08 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
| BS ISO 12575-1:2012 | Thermal insulation. Exterior insulating systems for foundations Material specification |
| BS ISO 11561:1999 | Ageing of thermal insulation materials. Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods) |
| UNI 7819 : 1988 | CELLULAR PLASTICS, RIGID - EXPANDED POLYSTYRENE SHEETS FOR THERMAL INSULATION - TYPES, REQUIREMENTS AND TESTS |
| BS ISO 21844:2018 | Cellular plastic. Cellulose foam thermal insulation. Material specification |
| BS ISO 7214 : 98 AMD 13595 | CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST |
| 05/30131970 DC : DRAFT APR 2005 | EN ISO 7214 - CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST |
| I.S. EN ISO 12217-2:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| ISO 8873-1:2006 | Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications |
| ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
| NF EN ISO 12215-2 : 2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| UNE-EN ISO 7214:2012 | Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012) |
| EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| EN ISO 7214:2012 | Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012) |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| 17/30350989 DC : 0 | BS ISO 21844 - CELLULAR PLASTIC - CELLULOSE FOAM THERMAL INSULATION - MATERIAL SPECIFICATION |
| ISO 9774:2004 | Thermal insulation for building applications — Guidelines for selecting properties |
| 05/19970897 DC : 0 | BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS |
| BS EN ISO 12215-2:2002 | Small craft. Hull construction and scantlings Materials. Core materials for sandwich construction, embedded materials |
| I.S. EN ISO 12217-3:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| UNE-EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| I.S. EN ISO 12217-1:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
| BS EN ISO 7214:2012 | Cellular plastics. Polyethylene. Methods of test |
| ISO 1923:1981 | Cellular plastics and rubbers — Determination of linear dimensions |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.