DIN 51563:2011-04
|
Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m |
ISO 1628-4:1999
|
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials |
BS 2782-7 Method 732A:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number:general conditions |
BS 2782-7 Method 732E:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number of poly(alkylene terephthalates) |
DIN EN ISO 1628-5:2015-05
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998) |
13/30279896 DC : 0
|
BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
BS 2782-7:Method 732F:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number of methyl methacrylate polymers |
18/30335365 DC : 0
|
BS EN ISO 307 - PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
UNE-EN ISO 1628-5:2015
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998) |
I.S. EN ISO 10555-1:2013
|
INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017) |
01/121388 DC : DRAFT MARCH 2001
|
ISO 307 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
NF ISO 11158 : 2009
|
LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HH, HL, HM, HV AND HG |
UNI EN ISO 307 : 2013
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
CAN/CSA-Z5100-17
|
Cellulose nanomaterials - Test methods for characterization |
ONORM EN ISO 307 : 2013
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013) |
I.S. EN ISO 1628-5:2015
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 5: THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS (ISO 1628-5:1998) |
PREN 1825-1 : DRAFT 1995
|
INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
BS EN ISO 3104:1996
|
Methods of test for petroleum and its products. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity |
BS ISO 8178-5:2008
|
Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
UNE-ISO 1628-4:2013
|
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials |
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 446 : 2012
|
Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers |
ASTM D 7044 : 2015 : REDLINE
|
Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
UNE-EN 16245-2:2014
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
EN 10310:2003
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
DIN EN 12092:2002-02
|
ADHESIVES - DETERMINATION OF VISCOSITY |
EN ISO 1628-1:2009/A1:2012
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009/AMD 1:2012) |
I.S. EN 1860-3:2003
|
APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS |
ONORM EN 1860-3 : 2006
|
APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE - REQUIREMENTS AND TEST METHODS |
BS ISO 26422:2014
|
Petroleum and related products. Determination of shear stability of lubricating oils containing polymers. Method using a tapered roller bearing |
I.S. EN 14213:2003
|
HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
11/30239977 DC : 0
|
BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
DIN EN 16245-2:2013-08
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
DIN EN ISO 307 E : 2013
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013) |
17/30366325 DC : 0
|
BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
UNI EN ISO 1628-1 : 2012
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES |
DIN EN ISO 1628-5 E : 2015
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 5: THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS (ISO 1628-5:1998) |
BS EN ISO 10555-1 : 2013
|
INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
EN ISO 307:2007/A1:2013
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007/AMD 1:2013) |
DIN EN ISO 1628-3:2010-10
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010) |
DIN EN 1860-3:2003-12
|
Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances; Requirements and test methods; German version EN 1860-3:2003 |
ISO 9371:1990
|
Plastics Phenolic resins in the liquid state or in solution Determination of viscosity |
BS EN ISO 9371:1995
|
Plastics. Phenolic resins in the liquid state or in solution. Determination of viscosity |
BS EN ISO 9665:2000
|
Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998) |
I.S. EN ISO 8178-5:1998
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
I.S. EN ISO 1628-1:2009
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
I.S. EN ISO 9665:2000
|
ADHESIVES - ANIMAL GLUES - METHODS FOR SAMPLING AND TESTING |
I.S. EN ISO 1628-3:2010
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES |
DIN EN 61868 : 1999
|
MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES |
BS 2782-7.732E(1998) : 1998
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS |
BS 2782-7.732A(1998) : 1998
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - GENERAL PRINCIPLES |
BS 2782-7.733A(1996) : 1996 AMD 9928
|
METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYAMIDES |
BS 2782-7:Method 732D:1999
|
Methods of testing plastics. Rheological properties Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers - Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers |
VDE 0370-15 : 1999
|
MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES |
BS 5377-2:1990
|
Assessment of laundering effects by means of a cotton control cloth Methods of analysis and test for the unsoiled cotton control cloth |
11/30124825 DC : 0
|
BS 7993 - TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS |
UNE EN ISO 307 : 2007
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007/AMD 1:2013) |
BS 2782-7.732C(1991) : 1991 AMD 10831
|
METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYETHYLENES AND POLYPROPYLENES |
05/30130718 DC : DRAFT MAR 2005
|
EN ISO 307 - PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
09/30196499 DC : 0
|
BS ISO 26422 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SHEAR STABILITY OF LUBRICATING OILS CONTAINING POLYMERS - METHOD USING A TAPERED ROLLER BEARING |
BS EN ISO 1628-5:2015
|
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Thermoplastic polyester (TP) homopolymers and copolymers |
BS 2782-7 Method 733A:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number of polyamides |
14/30290161 DC : 0
|
BS ISO 26422 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SHEAR STABILITY OF LUBRICATING OILS CONTAINING POLYMERS - METHOD USING A TAPERED ROLLER BEARING |
95/101288 DC : DRAFT FEB 1995
|
PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
BS 2000-71(1990) : 1990
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - KINEMATIC VISCOSITY OF TRANSPARENT AND OPAQUE LIQUIDS AND CALCULATION OF DYNAMIC VISCOSITY |
IP 71 : 1995
|
SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
I.S. EN 16245-2:2013
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
EN ISO 10555-1:2013/A1:2017
|
INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017) |
BS EN ISO 307 : 2007
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
ISO 26422:2014
|
Petroleum and related products Determination of shear stability of lubricating oils containing polymers Method using a tapered roller bearing |
ISO 8178-5:2015
|
Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
ISO 307:2007
|
Plastics Polyamides Determination of viscosity number |
I.S. EN 60450:2004
|
MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
ISO 4312:1989
|
Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth |
DIN EN ISO 1628-1:2012-10
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
BS EN 10310:2003
|
Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings |
EN ISO 8178-5 : 1997
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
EN 16245-2:2013
|
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
UNI EN 16245-2 : 2013
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
UNI EN ISO 1628-3 : 2010
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES |
DIN EN ISO 307:2013-08
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013) |
17/30319067 DC : 0
|
BS ISO 18747-1 - DETERMINATION OF PARTICLE DENSITY BY SEDIMENTATION METHODS - PART 1: ISOPYCNIC INTERPOLATION APPROACH |
BS EN 16245-2:2013
|
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
UNE-EN 10310:2011
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
BS EN 61868:1999
|
Mineral insulating oils. Determination of kinematic viscosity at very low temperatures |
BS 3900-A7.2(2003) : 2003 AMD 16864
|
METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A7: DETERMINATION OF THE VISCOSITY OF PAINT AT A HIGH RATE OF SHEAR - SECTION A7-2: DISC OR BALL VISCOMETER OPERATED AT A SPECIFIED SPEED |
BS 2782-7:Method 732B:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number of poly(vinyl chloride) resins |
NF EN 60450 : 2004 AMD 1 2007
|
MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
DEFSTAN 91-43/2(1993) : 1993
|
LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
BS 2782-7 Method 730A:1979
|
Methods of testing plastics. Rheological properties Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution |
I.S. EN ISO 307:2007
|
PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007) |
BIS IS 16084 : 2013
|
MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES |
ISO 11158:2009
|
Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
ISO 1628-5:1998
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 5: Thermoplastic polyester (TP) homopolymers and copolymers |
ISO 2884-2:2003
|
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed |
BS EN 14213:2003
|
Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
IEC 61868:1998
|
Mineral insulating oils - Determination of kinematic viscosity at very low temperatures |
BS EN ISO 1628-2:2000
|
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Poly(vinyl chloride) resins |
BS EN ISO 1628-1 : 2009
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
ISO 9665:1998
|
Adhesives Animal glues Methods of sampling and testing |
ISO 1628-1:2009
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
BS EN ISO 8178-5:1997
|
Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
BS EN ISO 2884-2:2006
|
Paints and varnishes. Determination of viscosity using rotary viscometers Disc or ball viscometer operated at a specified speed |
EN 14213:2003/AC:2003
|
HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
EN ISO 9665 : 2000
|
ADHESIVES - ANIMAL GLUES - METHODS FOR SAMPLING AND TESTING |
EN 12092:2001
|
Adhesives - Determination of viscosity |
EN ISO 1628-5:2015
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998) |
EN 1860-3:2003/A1:2006
|
APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS |
EN ISO 2884-2:2006
|
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003) |
EN ISO 9371 : 1995
|
PLASTICS - PHENOLIC RESINS IN THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY |
UNE-ISO 1628-6:2013
|
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers |
BS EN 60450:2004
|
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
BS ISO 11158:2009
|
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG |
BS 2782-7.734 A TO D(1995) : 1995
|
METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - PLASTICS - PHENOLIC RESINS THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY |
BS 7993:2011
|
Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods |
UNE-ISO 1628-5:2013
|
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers |
08/30152069 DC : DRAFT SEP 2008
|
BS EN ISO 1628-3 - PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 3: POLYETHYLENES AND POLYPROPYLENES |
BS 2782-7 Method 732D:1991
|
Methods of testing plastics. Rheological properties Determination of viscosity number of polycarbonate moulding and extrusion materials |
CSA Z5100/Z5200 PACKAGE : 2017
|
CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION |
CEI EN 61868 : 1999
|
MINERAL INSULATING OILS - DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES |
IP PM EJ : 2014
|
DETERMINATION OF KINEMATIC VISCOSITY OF AVIATION TURBINE FUELS - MANUAL AND AUTOMATED METHOD |
ISO 10555-1:2013
|
Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
ISO 18747-1:2018
|
Determination of particle density by sedimentation methods — Part 1: Isopycnic interpolation approach |
BS ISO 1628-5 : 1998
|
RHEOLOGICAL PROPERTIES - PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS |
ASTM D 446 : 2012 : R2017
|
Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers |
DIN EN 14213 E : 2003
|
HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
ISO 1628-2:1998
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 2: Poly(vinyl chloride) resins |
BS EN 1860-3:2003
|
Appliances, solid fuels and firelighters for barbecueing Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods |
BS EN 12092:2001
|
Adhesives. Determination of viscosity |
BS EN ISO 1628-3:2010
|
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Polyethylenes and polypropylenes |
ISO 1628-3:2010
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
IEC 60450:2004+AMD1:2007 CSV
|
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
DIN EN 10310:2004-07
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
DIN EN 14213:2003-11
|
HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 307:2007
|
Plastics - Polyamides - Determination of viscosity number (ISO 307:2007) |
EN 61868:1999
|
Mineral insulating oils - Determination of kinematic viscosity at very low temperatures |
EN 60450:2004/A1:2007
|
MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
BS 647:1993
|
Adhesives methods for samplig and testing animal glues |