• There are no items in your cart

ISO 3210:2017

Current

Current

The latest, up-to-date edition.

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

30-10-2017

€60.00
Excluding VAT

ISO 3210:2017 specifies methods of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in acid solution(s).

It consists of the following two methods.

- Method 1: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in a phosphoric acid based solution without prior acid treatment.

- Method 2: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in a phosphoric acid based solution with prior acid treatment.

Method 1 is applicable to anodic oxidation coatings intended for decorative or protective purposes or where resistance to staining is important.

Method 2 is applicable to anodic oxidation coatings intended for outdoor architectural purposes. For less severe applications, Method 1 can be more suitable.

The methods are not applicable to the following:

- hard-type anodic oxidation coatings which normally are not sealed;

- anodic oxidation coatings that have been sealed only in dichromate solutions;

- anodic oxidation coatings produced in chromic acid solutions;

- anodic oxidation coatings that have undergone treatment to render them hydrophobic.

NOTE 1 The methods assess the quality of hydrothermal sealing applied to anodized aluminium. They can be appropriate for other sealing methods.

NOTE 2 The methods are destructive and can serve as reference methods in case of doubt or dispute regarding the results of the test for loss of absorptive power (see ISO 2143) or the measurement of admittance (see ISO 2931).

Committee
ISO/TC 79/SC 2
DevelopmentNote
Supersedes ISO/DIS 3210. (11/2017)
DocumentType
Standard
Pages
7
PublisherName
International Organization for Standardization
Status
Current
Supersedes

I.S. EN ISO 7599:2018 ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM (ISO 7599:2018)
NF EN ISO 7599 : 2011 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
09/30195858 DC : 0 BS EN ISO 2931 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE
ISO 7599:2018 Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
ISO 7583:2013 Anodizing of aluminium and its alloys — Terms and definitions
I.S. EN ISO 2143:2017 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING - DYE-SPOT TEST WITH PRIOR ACID TREATMENT (ISO 2143:2017)
I.S. EN ISO 2931:2018 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE (ISO 2931:2017)
ISO 2931:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
BS 6161-4:1981 Methods of test for anodic oxidation coatings on aluminium and its alloys Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
UNE-EN ISO 7599:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010)
PREN ISO 2143 : DRAFT 2009 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING - DYE SPOT TEST WITH PRIOR ACID TREATMENT
EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
UNI EN ISO 7599 : 2010 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
17/30333721 DC : 0 BS EN ISO 7599 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
BS ISO 7583:2013 Anodizing of aluminium and its alloys. Terms and definitions
09/30195846 DC : 0 BS EN ISO 2143 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING - DYE SPOT TEST WITH PRIOR ACID TREATMENT
12/30257615 DC : 0 BS ISO 7583 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - TERMS AND DEFINITIONS
DIN EN ISO 7599:2010-12 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
ONORM EN ISO 7599 : 2010 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
ISO 2143:2017 Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
BS EN ISO 2143:2017 Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment
EN ISO 2931:2018 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
ISO/TR 16689:2012 Anodizing of aluminium and its alloys Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test Evaluation of correlations
PREN 16759 : DRAFT 2014 STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
PD ISO/TR 16689:2012 Anodizing of aluminium and its alloys. Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test. Evaluation of correlations
EN ISO 2143:2017 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
16/30333715 DC : 0 BS EN ISO 2143 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING - DYE-SPOT TEST WITH PRIOR ACID TREATMENT
16/30333718 DC : 0 BS EN ISO 2931 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE
ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
14/30300917 DC : 0 BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)

ISO 2143:2017 Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
ISO 7583:2013 Anodizing of aluminium and its alloys — Terms and definitions
ISO 2931:2010 Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.