ISO 3270:1984
Current
The latest, up-to-date edition.
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
01-03-1984
Specifies conditions of temperature and relative humidity for general use. The test is applicable to coating materials in liquid or powder form, to wet or dry films, and their raw materials. The conditioning atmosphere and the test atmosphere are defined. This third edition cancels and replaces the second edition ISO 3270-1980.
Committee |
ISO/TC 35/SC 9
|
DevelopmentNote |
Also numbered as BS EN 23270 (06/2004)
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN 23270 : 1991 | Identical |
NBN EN 29117 : 1993 | Identical |
NEN ISO 3270 : 2001 | Identical |
NS ISO 3270 : 1ED 1991 | Identical |
I.S. EN 23270:1992 | Identical |
PN EN 23270 : 1993 | Identical |
SNV NF EN 23270 : 1991 | Identical |
SNV DIN EN 23270 : 1991 | Identical |
UNI EN 23270 : 1992 | Identical |
BS 3483-0:1990 | Similar to |
BS 3900-0:1989 | Similar to |
EN 23270:1991 | Identical |
UNE-EN 23270:1993 | Identical |
DIN EN 23270:1991-09 | Identical |
JIS K 5600-1-6:1999 | Identical |
I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
BS 3900-A17:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Coating of test panels at a specified spreading rate |
10/30206990 DC : 0 | BS EN ISO 6272-1 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
BS X 37:2004 | Intumescent paint for aerospace purposes. Specification |
DIN EN ISO 20567-3:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
14/30309764 DC : 0 | BS EN ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING |
DIN EN ISO 9117-2:2010-07 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
17/30371343 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
I.S. EN ISO 3678:1995 | PAINTS AND VARNISHES - PRINT-FREE TEST |
15/30329701 DC : 0 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
10/30229703 DC : 0 | BS EN ISO 2812-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
UNI EN ISO 1518-1 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
10/30210869 DC : 0 | BS EN ISO 9117-4 - PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER |
ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
BS EN ISO 8130-8:2010 | Coating powders Assessment of the storage stability of thermosetting powders |
12/30268955 DC : 0 | BS EN 13523-3 - COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
BS EN 13523-4:2014 | Coil coated metals. Test methods Pencil hardness |
BS 3900-E12:1986 | Methods of test for paints Indentation test (spherical or pyramidal) |
BS 3900-E12.2:2000 | Methods of test for paints Determination of Knoop hardness by measurement of the indentation depth |
BS EN ISO 9117-6:2012 | Paints and varnishes. Drying tests Print-free test |
14/30309758 DC : 0 | BS EN ISO 4623-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
10/30205803 DC : 0 | BS EN ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
10/30200337 DC : 0 | BS EN ISO 13129 - PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMMETRY (RV) OR DC TRANSIENT (DCT) MEASUREMENTS |
DIN ISO 8130-8 E : 2005 | COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
UNE-EN ISO 9117-4:2013 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
17/30361497 DC : 0 | BS EN ISO 2812-5 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
UNI EN 13523-17 : 2012 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
I.S. EN 4593:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
16/30344580 DC : 0 | BS EN ISO 6270-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONDENSATION (SINGLE-SIDED EXPOSURE) |
BS ISO 20567-1 : 2005 AMD 16853 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING |
BS ISO 20567-2 : 2005 AMD 16852 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY |
BS EN ISO 4623-1:2002 | Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates |
BS EN 2434-004:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High flexibility |
03/309845 DC : DRAFT JUNE 2003 | EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
BS EN 16105:2011 | Paints and varnishes. Laboratory method for determination of release of substances from coatings in intermittent contact with water |
BS EN 4687:2012 | Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application |
BS ISO 19403-4:2017 | Paints and varnishes. Wettability Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension |
15/30309740 DC : 0 | BS ISO 19403-2 - PAINTS AND VARNISHES - WETTABILITY - PART 2: DETERMINATION OF THE SURFACE FREE ENERGY OF SOLID SURFACES BY MEASURING THE CONTACT ANGLE |
BS EN 15457:2014 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
03/309846 DC : DRAFT JUNE 2003 | EN 13523-16 - COIL COATED METALS - TEST METHODS - PART 16: RESISTANCE TO ABRASION |
02/123757 DC : DRAFT OCT 2002 | ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 2: SINGLE IMPACT TEST |
BS 3900-F17(1998) : 1998 AMD 13281 | METHODS OF TEST FOR PAINTS - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
15/30329707 DC : 0 | BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
02/122653 DC : DRAFT JUN 2002 | BS EN ISO 6860 - PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
PREN 13523-10 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
PREN 15457 : DRAFT 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
ISO 6270-3:2018 | Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir) |
I.S. EN ISO 9117-2:2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
PREN 4593 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHOD - DETERMINATION OF SOLAR ABSORPTANCE |
PREN 4406 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE COATING - ABRASION RESISTANT |
PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
ISO 2812-4:2017 | Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
I.S. EN 2434-003:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
ISO 11503:1995 | Paints and varnishes — Determination of resistance to humidity (intermittent condensation) |
BS 5X 17(1998) : 1998 | SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES |
I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
I.S. EN ISO 2812-4:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
I.S. EN 16105:2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
UNI EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
I.S. EN ISO 4623-1:2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
ISO 19403-5:2017 | Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy |
UNI EN 2434-004 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
I.S. EN ISO 17463:2014 | PAINTS AND VARNISHES - GUIDELINES FOR THE DETERMINATION OF ANTICORROSIVE PROPERTIES OF ORGANIC COATINGS BY ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE (ISO 17463:2014) |
BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
NF EN ISO 2812-5 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
EN ISO 2812-3:2012 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
BS EN ISO 8130-13:2010 | Coating powders Particle size analysis by laser diffraction |
I.S. EN 15458:2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
DIN EN 13523-15:2015-09 | Coil coated metals - Test methods - Part 15: Metamerism |
DIN EN ISO 11341:2004-12 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
BS EN 13523-18:2002 | Coil coated metals. Test methods Resistance to staining |
BS EN 13523-13:2014 | Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat |
BS EN ISO 7784-2:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive rubber wheels and rotating test specimen |
UNE-EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
BS EN 2435-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance |
BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
BS EN ISO 1520:2006 | Paints and varnishes. Cupping test |
BS EN 2436-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer For exterior use with surface preparation tolerance |
BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
BS EN 13523-2:2014 | Coil coated metals. Test methods Gloss |
BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
BS EN 2436-001:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer Basic requirements |
BS EN 13523-24:2017 | Coil coated metals. Test methods Resistance to blocking and pressure marking |
BS EN 2436-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance |
BS EN 13523-11:2011 | Coil coated metals. Test methods Resistance to solvents (rubbing test) |
BS EN ISO 7784-3:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
I.S. EN ISO 7784-3:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 3: METHOD WITH ABRASIVE-PAPER COVERED WHEEL AND LINEARLY RECIPROCATING TEST SPECIMEN (ISO 7784-3:2016) |
I.S. EN 1062-3:2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
UNI EN 13523-3 : 2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
EN 13523-17:2011 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
DIN EN 13523-22:2017-05 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
DIN EN 13523-1:2017-05 | Coil coated metals - Test methods - Part 1: Film thickness |
DIN EN ISO 20567-1:2017-07 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING (ISO 20567-1:2017) |
EN 13523-13:2014 | Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
EN 13523-11:2011 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
DIN EN ISO 20567-2:2017-07 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017) |
EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
BS 3900-F18(2005) : 2005 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
DIN EN ISO 15234:2011-02 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
BS 6781:1986 | Specification for continuously organic coated steel flat products |
12/30268952 DC : 0 | BS EN 13523-0 - COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
14/30289467 DC : 0 | BS EN ISO 3248 - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT |
01/121972 DC : DRAFT MAY 2001 | BS 3900-E12.3 - PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 3: DETERMINATION OF UNIVERSAL HARDNESS AND RELATED PROPERTIES USING A VICKERS INDENTOR |
12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
BS 3900-F12:1985 | Methods of test for paint. Durability tests on paint films Determination of resistance to neutral salt spray |
97/700601 DC : DRAFT JAN 1997 | PREN 2434-1 - AEROSPACE SERIES - PAINTS AND VARNISHES TWO COMPONENTCOLD CURING POLYURETHANE FINISH - PART 1: MINIMUM REQUIREMENTS |
UNE-EN ISO 9117-6:2013 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
ISO 8130-13:2001 | Coating powders Part 13: Particle size analysis by laser diffraction |
I.S. EN ISO 9117-5:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012) |
97/700607 DC : DRAFT JAN 1997 | PREN 2435-4 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 4: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE TOLERANCE |
DIN EN ISO 8130-8:2011-02 | Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994) |
12/30268976 DC : 0 | BS EN 13523-4 - COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
BS EN 2434-003:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Flexible and high fluid resistance for interior |
14/30266805 DC : 0 | BS EN ISO 4624 - PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
12/30243830 DC : 0 | BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
02/123754 DC : DRAFT OCT 2002 | ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: EVALUATION OF CORROSION AROUND A SCRIBE |
10/30229700 DC : 0 | BS EN ISO 9117-6 - PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
10/30218101 DC : 0 | BS EN 16105 - PAINTS AND VARNISHES - LEACHING OF SUBSTANCES FROM COATINGS - LABORATORY IMMERSION METHOD |
14/30309761 DC : 0 | BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
14/30309767 DC : 0 | BS EN ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY |
DIN EN 13523-4:2014-10 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
10/30206970 DC : 0 | BS EN ISO 6272-2 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
08/30173308 DC : DRAFT MAY 2008 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
BS 3900-F9(1982) : AMD 8611 | METHODS OF TEST FOR PAINTS - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION) |
UNI EN 15457 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
ISO 19403-3:2017 | Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method |
09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
BS 3900-A16:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of natural spreading rate by brush application |
12/30268958 DC : 0 | BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
14/30266788 DC : 0 | BS EN ISO 7784-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST PANEL |
I.S. EN 2434-001:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
I.S. EN 15457:2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
PREN 13523-3 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
I.S. EN 4688:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
ONORM EN ISO 28199-1 : 2010 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
PREN 2436-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
PREN 2436-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
PREN 2436-5 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING PRIMER - PART 05: FOR EXTERIOR USE WITH SURFACE PREPARATION TOLERANCE |
PREN 13523-4 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
EN ISO 8130-8:2010 | Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994) |
UNE-EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
I.S. EN ISO 9117-6:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012) |
I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
ISO 2812-5:2007 | Paints and varnishes Determination of resistance to liquids Part 5: Temperature-gradient oven method |
PREN 13523-0 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
PREN 13523-7 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
ISO 6270-2:2017 | Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir) |
BS EN ISO 16474-1:2013 | Paints and varnishes. Methods of exposure to laboratory light sources General guidance |
EN ISO 8130-13:2010 | Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) |
BS EN ISO 1518-1:2011 | Paints and varnishes. Determination of scratch resistance Constant-loading method |
UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
I.S. EN 2434-004:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
I.S. ISO 6441:1988 | PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL) |
ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
DIN EN 13523-22:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
DIN EN 13523-16:2005-02 | Coil coated metals - Test methods - Part 16: Resistance to abrasion |
DIN EN 13523-10:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
DIN EN 13523-17:2012-02 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
DIN EN ISO 14577-4:2015-05 (Draft) | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
DIN EN ISO 1520:2007-11 | PAINTS AND VARNISHES - CUPPING TEST |
DIN EN ISO 20567-2:2007-01 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY (ISO 20567-2:2017) |
BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
UNE-EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
BS EN 13523-16:2004 | Coil coated metals. Test methods Resistance to abrasion |
ISO 15711:2003 | Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
UNE-EN ISO 20567-1:2017 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017) |
UNE-EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
UNE-EN ISO 16773-2:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 28199-1:2009 | Paints and varnishes Evaluation of properties of coating systems related to the application process Part 1: Relevant vocabulary and preparation of test panels |
BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
BS EN 13523-1:2017 | Coil coated metals. Test methods Film thickness |
UNE-EN 13523-11:2012 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
I.S. EN ISO 6860:2006 | PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
I.S. EN ISO 1520:2006 | PAINTS AND VARNISHES - CUPPING TEST |
I.S. EN ISO 6272-1:2011 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
I.S. EN ISO 4624:2016 | PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION (ISO 4624:2016) |
UNI EN 4688 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
I.S. EN 13523-5:2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
I.S. EN 13523-23:2015 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
I.S. EN 13523-7:2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
I.S. EN ISO 1519:2011 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
DIN EN ISO 11341:1998-02 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
I.S. EN 13523-13:2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
I.S. EN 13523-12:2017 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
I.S. EN ISO 11998:2006 | PAINTS AND VARNISHES - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
I.S. EN 13523-1:2017 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
I.S. EN ISO 1522:2006 | PAINTS AND VARNISHES - PENDULUM DAMPING TEST |
UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
DIN EN 13523-11:2011-09 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
I.S. EN ISO 6272-2:2011 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
I.S. EN 13523-2:2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
I.S. EN ISO 4623-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES (ISO 4623-2:2016) |
I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
I.S. EN 13523-3:2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
I.S. EN 13523-15:2015 | COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
I.S. EN ISO 16773-2:2016 | ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 2: COLLECTION OF DATA (ISO 16773-2:2016) |
I.S. EN 13523-10:2017 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
I.S. EN ISO 14577-4:2016 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
I.S. EN ISO 7784-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-2:2016) |
I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
I.S. EN ISO 20567-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING (ISO 20567-1:2017) |
EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
I.S. EN 13523-22:2017 | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
I.S. EN ISO 20567-2:2017 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY (ISO 20567-2:2017) |
I.S. EN 13523-14:2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
I.S. EN 13523-24:2017 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
I.S. EN 13523-9:2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
I.S. EN 13523-0:2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
I.S. EN ISO 4628-8:2012 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
I.S. EN ISO 3248:2016 | PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:2016) |
EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
I.S. EN ISO 7784-1:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-1:2016) |
BS 3900-D1:1978 | Methods of test for paints. Optical tests on paint films Visual comparison of the colour of paints |
BS 3900-F12(1997) : 1997 AMD 13288 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
BS 3900-D1(1998) : 1998 AMD 13287 | METHODS OF TEST FOR PAINTS - VISUAL COMPARISON OF THE COLOUR OF PAINTS |
BS 3900-E5(1998) : 1998 AMD 12090 | METHODS OF TEST FOR PAINTS - PENDULUM DAMPING TESTING |
UNE-EN ISO 8130-8:2011 | Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994) |
BS EN ISO 11997-1:2017 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid |
14/30292470 DC : 0 | BS EN 15457 - PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
I.S. EN ISO 7783-1:1999 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS |
17/30371341 DC : 0 | PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION |
16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
BS EN ISO 2812-1:2017 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
NF EN ISO 9117-2 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
97/700606 DC : DRAFT JAN 1997 | PREN 2435-3 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD PRIMER - PART 3: HIGH CORROSION AND FLUID RESISTANCE |
97/700605 DC : DRAFT JAN 1997 | PREN 2435-2 - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 2: HIGH CORROSION RESISTANCE |
PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
09/30196695 DC : 0 | BS ISO 1519 - PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
BS ISO 19403-2:2017 | Paints and varnishes. Wettability Determination of the surface free energy of solid surfaces by measuring the contact angle |
14/30266791 DC : 0 | BS EN ISO 7784-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST PANEL |
BS ISO 19403-5:2017 | Paints and varnishes. Wettability Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy |
15/30329704 DC : 0 | BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
BS EN ISO 20567-3:2012 | Paints and varnishes. Determination of stone-chip resistance of coatings Single-impact test with a free-flying impact body |
UNI EN 4593 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
NF EN ISO 8130-8 : 2011 | COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
DIN EN 15457:2014-11 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
15/30309749 DC : 0 | BS ISO 19403-5 - PAINTS AND VARNISHES - WETTABILITY - PART 5: DETERMINATION OF THE POLAR AND DISPERSIVE FRACTIONS OF THE SURFACE TENSION OF LIQUIDS FROM CONTACT ANGLES MEASUREMENTS ON A SOLID WITH ONLY A DISPERSE CONTRIBUTION TO ITS SURFACE ENERGY |
03/313997 DC : DRAFT OCT 2003 | EN ISO 6270-4 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 4: CONDENSATION-WATER TEST ATMOSPHERES |
BS EN ISO 17463:2014 | Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique |
BS 3900-E11(1985) : 1985 AMD 8612 | METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - BEND TEST (CONICAL MANDREL) |
BS ISO 19403-3:2017 | Paints and varnishes. Wettability Determination of the surface tension of liquids using the pendant drop method |
DIN EN ISO 7783:2012-02 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
DIN EN 13523-24:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
I.S. EN ISO 9117-4:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012) |
97/700604 DC : DRAFT JAN 1997 | PREN 2434-4: AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 4: HIGH FLEXIBILITY |
DIN ISO 8130-13:2005-03 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
BS EN ISO 15234:2010 | Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber |
PREN 13523-24 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
BS ISO 16862 : 2003 AMD 16867 | PAINTS AND VARNISHES - EVALUATION OF SAG RESISTANCE |
BS 3900-A18:1993 | Methods of test for paints- determination of the pot life of liquid systems preparation and conditioning of samples and guidelines for testing. |
BS 3900-F21(2005) : 2005 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 2: PROCEDURE FOR EXPOSING TEST SPECIMENS IN CONDENSATION-WATER ATMOSPHERES |
BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
PREN 2435-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
PREN 2435-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
BS EN ISO 2812-4:2017 | Paints and varnishes. Determination of resistance to liquids Spotting methods |
ONORM EN ISO 2812-5 : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
UNE-EN ISO 7783:2012 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
ISO 19403-7:2017 | Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) |
DIN EN ISO 16474-1:2014-03 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
I.S. EN ISO 8130-8:2010 | COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
UNI EN ISO 16474-1 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
ISO 11659-3:2004 | Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on lacquers |
I.S. EN 13523-11:2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
ONORM EN ISO 16474-1 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
PREN 13523-1 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
DIN EN ISO 8130-13:2011-02 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
PREN 13523-5 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
UNI EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
UNI EN ISO 9117-6 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
DIN EN 13523-12:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
DIN EN 13523-14:2014-08 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
UNE-EN ISO 3248:2017 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
DIN EN 13523-0:2014-08 | Coil coated metals - Test methods - Part 0: General introduction |
DIN EN 13523-2:2014-08 | Coil coated metals - Test methods - Part 2: Gloss |
DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
DIN EN 13523-3:2014-08 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
DIN EN ISO 1519:2011-04 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
BS EN 2435-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance |
BS EN ISO 20567-2:2017 | Paints and varnishes. Determination of stone-chip resistance of coatings Single-impact test with a guided impact body |
UNE-EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
BS EN 2436-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
UNE-EN ISO 4628-8:2013 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
ISO 16862:2003 | Paints and varnishes Evaluation of sag resistance |
ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
UNE-EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
BS EN 13523-15:2015 | Coil coated metals. Test methods Metamerism |
ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
UNE-EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
UNE-EN ISO 6272-1:2012 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
BS EN ISO 15710:2006 | Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
UNE-EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
UNE-EN ISO 6272-2:2012 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
UNE-EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
ISO 3248:2016 | Paints and varnishes Determination of the effect of heat |
UNE-EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
UNE-EN 13523-17:2012 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
EN ISO 2812-5:2007 | Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007) |
EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining |
EN ISO 1522:2006 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
EN ISO 9117-5:2012 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
EN 2435-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance |
EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
EN 2435-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
UNI EN 1062-3 : 2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
UNI EN ISO 6272-1 : 2013 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
UNI EN ISO 6272-2 : 2013 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
UNI EN ISO 1519 : 2011 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
UNI EN 13523-4 : 2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
UNI EN 13523-14 : 2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
UNI EN ISO 4628-8 : 2013 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
UNI EN 13523-13 : 2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
EN ISO 6860:2006 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
EN 2434-004:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility |
EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
UNI EN 13523-5 : 2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
UNE-EN ISO 28199-1:2010 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
BS 3900-C8(1978) : 1978 AMD 8613 | METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRINT-FREE TEST |
EN ISO 2812-1:2017 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
97/700602 DC : DRAFT JAN 1997 | PREN 2434-2 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 2: HIGH CHEMICAL RESISTANCE |
93/712351 DC : DRAFT SEP 1993 | PREN 2435 - AEROSPACE SERIES - CORROSION RESISTANT, TWO-COMPONENT, COLD CURING PRIMER |
03/309850 DC : DRAFT JUNE 2003 | EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
DIN EN 15458:2014-11 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
I.S. EN ISO 20567-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
15/30268151 DC : 0 | BS EN ISO 14577-4 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS |
ISO 7783:2011 | Paints and varnishes Determination of water-vapour transmission properties Cup method |
08/30189225 DC : DRAFT DEC 2008 | BS EN ISO 7783 - PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
BS EN 15458:2014 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae |
97/700603 DC : DRAFT JAN 1997 | PREN 2434-3 - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 3: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
BS ISO 15710 : 2002 AMD 16861 | PAINTS AND VARNISHES - CORROSION TESTING BY ALTERNATE IMMERSION IN AND REMOVAL FROM A BUFFERED SODIUM CHLORIDE SOLUTION |
BS EN ISO 9117-4:2012 | Paints and varnishes. Drying tests Test using a mechanical recorder |
BS 3900-J13(2001) : 2001 | METHODS OF TEST FOR PAINTS - TESTING OF COATING POWDERS - PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
UNI EN ISO 15234 : 2011 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADY-STATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
BS 3900-F19(2000) : 2000 AMD 16874 | METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
10/30197386 DC : 0 | BS ISO 12013-2 - PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE-DAMPED OSCILLATION METHOD - PART 2: GLASS-TRANSITION TEMPERATURE |
BS 3900-F18:1998 | Methods of test for paint. Durability tests on paint films Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle |
06/30148614 DC : 0 | EN ISO 17132 - PAINTS AND VARNISHES - T-BEND TEST |
I.S. EN ISO 4622:1995 | PAINTS AND VARNISHES - PRESSURE TEST FOR STACKABILITY |
11/30217720 DC : 0 | BS EN ISO 20567-3 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY |
03/310937 DC : DRAFT JUNE 2003 | EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
04/19994774 DC : DRAFT AUG 2004 | EN 4406 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - ABRASION RESISTANT |
UNI EN 2434-001 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
08/30188879 DC : DRAFT DEC 2008 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
BS EN ISO 2812-5:2007 | Paints and varnishes. Determination of resistance to liquids Temperature-gradient oven method |
15/30309743 DC : 0 | BS ISO 19403-3 - PAINTS AND VARNISHES - WETTABILITY - PART 3: DETERMINATION OF THE SURFACE TENSION OF LIQUIDS USING THE PENDANT DROP METHOD |
BS 3900-E12.1:2000 | Methods of test for paints Determination of Knoop hardness by measurement of the indentation length using a microscope |
15/30309746 DC : 0 | BS ISO 19403-4 - PAINTS AND VARNISHES - WETTABILITY - PART 4: DETERMINATION OF THE POLAR AND DISPERSIVE FRACTIONS OF THE SURFACE TENSION OF LIQUIDS FROM AN INTERFACIAL TENSION |
BS ISO 19403-6:2017 | Paints and varnishes. Wettability Measurement of dynamic contact angle |
BS X38(2005) : 2005 | HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
BS EN 4593:2011 | Aerospace series. Paints and varnishes. Determination of solar absorptance |
I.S. EN ISO 6270-2:2018 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 2: CONDENSATION (IN-CABINET EXPOSURE WITH HEATED WATER RESERVOIR) (ISO 6270-2:2017) |
NF EN ISO 8130-13 : 2011 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
17/30361500 DC : 0 | BS EN ISO 4623-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
UNI EN ISO 9117-4 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER |
UNI EN 15458 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
10/30207417 DC : 0 | BS EN ISO 2409 - PAINTS AND VARNISHES - CROSS-CUT TEST |
16/30344584 DC : 0 | BS EN ISO 6270-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 2: CONDENSATION (IN-CABINET EXPOSURE) |
BS 3900-C7:1982 | Methods of test for paints. Tests associated with paint film formation Pressure test for stackability |
BS 3900-H8(2005) : 2005 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE |
BS ISO 19403-7:2017 | Paints and varnishes. Wettability Measurement of the contact angle on a tilt stage (roll-off angle) |
BS 3900-F20(2004) : 2004 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
BS 3900-E13(1993) : 1993 AMD 8354 | METHODS OF TEST FOR PAINTS - FALLING WEIGHT RESISTANCE (IMPACT) |
DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
BS EN ISO 28199-1:2009 | Paints and varnishes. Evaluation of properties of coating systems related to the application process Relevant vocabulary and preparation of test panels |
DIN EN ISO 9117-4:2012-11 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
15/30309752 DC : 0 | BS ISO 19403-6 - PAINTS AND VARNISHES - WETTABILITY - PART 6: MEASUREMENT OF DYNAMIC CONTACT ANGLE |
14/30298904 DC : 0 | BS EN ISO 7784-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 3: METHOD WITH ABRASIVE-PAPER COVERED WHEEL AND LINEARLY RECIPROCATING TEST PANEL |
BS EN 2434-001:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Basic requirements |
BS EN ISO 9117-2:2010 | Paints and varnishes. Drying tests Pressure test for stackability |
BS EN ISO 9117-5:2012 | Paints and varnishes. Drying tests Modified Bandow-Wolff test |
BS 3900-E16(2000) : 2000 AMD 16868 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (RECIPROCATING TEST PANEL METHOD) |
BS 3900-G9(1996) : 1996 AMD 10384 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE OF FREE FILMS (DISH METHOD) |
PREN 2434-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 03: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
UNI EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
UNI EN ISO 9117-2 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
PREN 2434-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 01: BASIC REQUIREMENTS |
PREN 2435-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
PREN 4688 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
NF EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
PREN 4687 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
PREN 4592 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF INFRARED REFLECTANCE |
UNI EN 4160 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
ISO 4623-1:2000 | Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates |
UNE-EN ISO 20567-3:2013 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
NF EN ISO 15234 : 2011 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADY-STATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
I.S. EN ISO 11997-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017) |
UNI EN ISO 9117-5 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
I.S. EN ISO 16474-1:2013 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
ISO 6441-1:1999 | Paints and varnishes Determination of micro-indentation hardness Part 1: Knoop hardness by measurement of indentation length |
I.S. EN ISO 15234:2010 | PAINTS AND VARNISHES - TESTING OF FORMALDEHYDE-EMITTING COATINGS AND MELAMINE FOAMS - DETERMINATION OF THE STEADYSTATE CONCENTRATION OF FORMALDEHYDE IN A SMALL TEST CHAMBER |
PREN 13523-12 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
ISO 6441-2:1999 | Paints and varnishes Determination of micro-indentation hardness Part 2: Knoop hardness by measurement of indentation depth under load |
UNE-EN ISO 16474-1:2014 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) |
EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
EN ISO 6270-1:2018 | Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) |
UNI EN ISO 8130-13 : 2011 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
BS EN ISO 2812-3:2012 | Paints and varnishes. Determination of resistance to liquids Method using an absorbent medium |
UNE-EN ISO 2812-4:2018 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
UNE-EN ISO 9117-5:2013 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
PREN 15458 : DRAFT 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
EN ISO 6270-2:2018 | Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) |
ISO 6270-1:2017 | Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure) |
UNI EN 13523-11 : 2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
I.S. EN ISO 9514:2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
I.S. EN ISO 1518-1:2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
I.S. EN ISO 2812-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
DIN EN 13523-13:2014-08 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
DIN EN 13523-23:2015-09 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
DIN EN 13523-7:2014-08 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
DIN EN 13523-5:2014-08 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
DIN EN 13523-1:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
DIN EN 13523-9:2014-08 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
BS EN 13523-5:2014 | Coil coated metals. Test methods Resistance to rapid deformation (impact test) |
ISO 7784-1:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
BS EN 13523-12:2017 | Coil coated metals. Test methods Resistance to scratching |
BS EN ISO 11341:2004 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
BS EN 13523-6:2002 | Coil coated metals. Test methods Adhesion after indentation (cupping test) |
BS EN ISO 7783-1:2000 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of water-vapour transmission rate of free films (dish method) |
ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
UNE-EN ISO 1522:2007 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
BS EN ISO 3668:2001 | Paints and varnishes. Visual comparison of the colour of paints |
BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
BS EN ISO 20567-1:2017 | Paints and varnishes. Determination of stone-chip resistance of coatings Multi-impact testing |
BS EN 13523-22:2017 | Coil coated metals. Test methods Colour difference. Visual comparison |
UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
BS EN ISO 1522:2006 | Paints and varnishes. Pendulum damping test |
BS EN ISO 6272-2:2011 | Paints and varnishes. Rapid-deformation (impact resistance) tests Falling-weight test, small-area indenter |
ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
ISO 9117-5:2012 | Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
BS EN ISO 1519:2011 | Paints and varnishes. Bend test (cylindrical mandrel) |
UNE-EN ISO 7784-3:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016) |
ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
UNE-EN ISO 20567-2:2017 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017) |
ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
ISO 17463:2014 | Paints and varnishes Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique |
ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
BS EN ISO 4628-8:2012 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
BS EN ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Collection of data |
UNE-EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Part 2: Collection of data |
ISO 6272:1993 | Paints and varnishes — Falling-weight test |
ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
ISO 11998:2006 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
ISO 9117-4:2012 | Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder |
ISO 1518:1992 | Paints and varnishes Scratch test |
ISO 9117-2:2010 | Paints and varnishes — Drying tests — Part 2: Pressure test for stackability |
ISO 20567-1:2017 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
BS EN 4592:2006 | Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance |
BS EN ISO 16862:2006 | Paints and varnishes. Evaluation of sag resistance |
BS EN 1062-11:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Methods of conditioning before testing |
BS EN ISO 4624:2016 | Paints and varnishes. Pull-off test for adhesion |
ISO 3678:1976 | Paints and varnishes — Print-free test |
ISO 1520:2006 | Paints and varnishes Cupping test |
BS EN ISO 6270:1995 | Paints and varnishes. Determination of resistance to humidity (continuous condensation) |
ISO 20567-3:2012 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body |
BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
ISO 7784-2:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
BS EN 13523-3:2014 | Coil coated metals. Test methods Colour difference. Instrumental comparison |
ISO 15234:1999 | Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber |
UNE-EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
BS EN ISO 9514:2005 | Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing |
BS EN 13523-17:2011 | Coil coated metals. Test methods Adhesion of strippable films |
BS EN 1062-3:2008 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of liquid water permeability |
UNE-EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
BS EN ISO 3248:2001 | Paints and varnishes. Determination of the effect of heat |
ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
BS EN 1062-6:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of carbon dioxide permeability |
UNE-EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
UNE-EN ISO 14577-4:2017 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
ISO 4622:1992 | Paints and varnishes Pressure test for stackability |
ISO 7784-3:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
UNE-EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
UNE-EN ISO 2812-1:2018 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
BS EN ISO 6860:2006 | Paints and varnishes. Bend test (conical mandrel) |
DIN EN ISO 14577-4:2017-04 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
EN 4593:2011 | Aerospace series - Paints and varnishes - Determination of solar absorptance |
EN ISO 20567-3:2012 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
EN ISO 3248:2016 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
EN ISO 15711:2004 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
EN 16105:2011 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
EN ISO 9117-4:2012 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
EN ISO 15234:2010 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
UNI EN 13523-9 : 2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
EN ISO 15710:2006 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
EN ISO 20567-2:2017 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017) |
EN ISO 11341:2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
EN ISO 11998:2006 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
EN ISO 1518:2000 | Paints and varnishes - Scratch test (ISO 1518:1992) |
EN 4592:2006 | Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance |
EN 29117 : 1992 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
EN ISO 6272-2:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
EN ISO 9117-6:2012 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
EN 2434-003:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior |
EN ISO 20567-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING (ISO 20567-1:2017) |
EN 2436-001 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING PRIMER - PART 001: BASIC REQUIREMENTS |
EN 4406:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant |
EN ISO 9117-2:2010 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
EN 4160:2011 | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
EN 15457:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
EN ISO 14577-4:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
EN ISO 16862:2006 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
EN 15458:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
EN 2436-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance |
EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
EN ISO 7783-1:1999 | Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
EN ISO 4622 : 1994 | PAINTS AND VARNISHES - PRESSURE TEST FOR STACKABILITY |
EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
EN 2434-001 : 2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
EN 2435-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance |
EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
EN 2436-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
EN 2436-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance |
EN 2436-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance |
EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
EN ISO 17463:2014 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
EN ISO 7784-3:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016) |
EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
03/309844 DC : DRAFT JUNE 2003 | EN 13523-11 - COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
UNI EN ISO 17463 : 2014 | PAINTS AND VARNISHES - GUIDELINES FOR THE DETERMINATION OF ANTICORROSIVE PROPERTIES OF ORGANIC COATINGS BY ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE |
PREN 13523-2 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
14/30292467 DC : 0 | BS EN 15458 - PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
DIN EN ISO 17463:2014-11 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
07/30174613 DC : 0 | BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
16/30340563 DC : 0 | BS EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
I.S. EN ISO 11341:2004 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
12/30268973 DC : 0 | BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
12/30268961 DC : 0 | BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
I.S. EN ISO 1518:2000 | PAINTS AND VARNISHES - SCRATCH TEST |
UNE-EN ISO 2812-3:2013 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
UNE-EN 15458:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
I.S. EN 29117:1993 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
08/30189484 DC : DRAFT OCT 2008 | BS EN ISO 9117-2 - PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
STANAG 2836 : 0 | REMOVABLE PAINTS FOR CAMOUFLAGE |
15/30329713 DC : 0 | BS EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
ISO 19403-4:2017 | Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension |
03/309847 DC : DRAFT JUNE 2003 | EN 13523-17 - COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
14/30296410 DC : 0 | BS PREN ISO 16773-2 - ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED SPECIMENS - PART 2: COLLECTION OF DATA |
DIN EN 16105:2011-12 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
14/30289470 DC : 0 | BS ISO 3668 - PAINTS AND VARNISHES - VISUAL COMPARISON OF THE COLOUR OF PAINTS |
BS EN 4160:2011 | Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure |
PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
UNI EN 16105 : 2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
UNI EN ISO 8130-8 : 2011 | COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
10/30210872 DC : 0 | BS EN ISO 9117-5 - PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
UNI EN 2434-003 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
17/30364788 DC : 0 | BS EN 3837 - AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
BS EN 4688:2012 | Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application |
17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
13/30252542 DC : 0 | BS EN ISO 17463 - PAINTS AND VARNISHES - DETERMINATION OF THE CORROSION PROTECTION PROPERTIES OF ORGANIC COATINGS BY THE ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE (ACET) |
BS EN ISO 7783:2011 | Paints and varnishes. Determination of water-vapour transmission properties. Cup method |
BS ISO 11997-1 : 2005 AMD 16875 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
15/30309755 DC : 0 | BS ISO 19403-7 - PAINTS AND VARNISHES - WETTABILITY - PART 7: MEASUREMENT OF THE CONTACT ANGLE ON A TILT STAGE (ROLL-OFF ANGLE) |
PREN 2434-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 04: HIGH FLEXIBILITY |
PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
02/123756 DC : DRAFT OCT 2002 | ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 1: MULTI IMPACT TEST |
ONORM EN ISO 9514 : 2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
I.S. EN 13523-4:2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
PREN 2436-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 01: BASIC REQUIREMENTS |
PREN 2436-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
PREN 2435-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 01: MINIMUM REQUIREMENTS |
PREN 2434-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 02: HIGH CHEMICAL RESISTANCE |
PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
I.S. EN 4160:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
I.S. EN 13523-17:2011 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
I.S. EN ISO 2812-5:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
UNE-EN ISO 15234:2011 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
ISO 2812-3:2012 | Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium |
I.S. EN ISO 8130-13:2010 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
EN ISO 7783:2011 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
ISO 16474-1:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance |
ISO 19403-2:2017 | Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle |
ISO 19403-6:2017 | Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle |
ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
EN ISO 4623-1:2002 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
UNE-EN ISO 8130-13:2011 | Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) |
UNE-EN 16105:2012 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
UNE-EN ISO 17463:2014 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
I.S. EN ISO 6270-1:2018 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONTINUOUS CONDENSATION (SINGLE-SIDED EXPOSURE) (ISO 6270-1:2017) |
EN ISO 2812-4:2017 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
I.S. EN ISO 7783:2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
I.S. EN ISO 2812-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
I.S. EN ISO 28199-1:2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
DIN EN 1062-3:2008-04 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
BS EN ISO 6272-1:2011 | Paints and varnishes. Rapid-deformation (impact resistance) tests Falling-weight test, large-area indenter |
UNE-EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
BS EN 2435-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
BS EN 13523-9:2014 | Coil coated metals. Test methods Resistance to water immersion |
ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
BS EN 4406:2006 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant |
BS EN 2436-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion resistance |
BS EN 13523-14:2014 | Coil coated metals. Test methods Chalking (Helmen method) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
BS EN ISO 14577-4:2016 | Metallic materials. Instrumented indentation test for hardness and materials parameters Test method for metallic and non-metallic coatings |
BS EN ISO 7784-1:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive-paper covered wheels and rotating test specimen |
UNE-EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
BS EN 13523-0:2014 | Coil coated metals. Test methods General introduction |
BS EN 13523-10:2017 | Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation |
BS EN ISO 11998:2006 | Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings |
BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
BS EN ISO 7783-2:1999 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination and classification of water-vapour transmission rate (permeability) |
BS EN 13523-7:2014 | Coil coated metals. Test methods Resistance to cracking on bending (T-bend test) |
ISO 20567-2:2017 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body |
BS EN ISO 4623-2:2004 | Paints and varnishes. Determination of resistance to filiform corrosion Aluminium substrates |
BS EN 13523-23:2015 | Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide |
ISO 8130-8:1994 | Coating powders Part 8: Assessment of the storage stability of thermosetting powders |
EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
EN 13523-16:2004 | Coil coated metals - Test methods - Part 16: Resistance to abrasion |
EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
UNI EN 13523-2 : 2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
DIN ISO 8130-8:2005-03 | COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS |
EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
UNI EN 13523-7 : 2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
DIN EN ISO 4624:2016-08 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
DIN EN ISO 1518-1:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011) |
DIN EN ISO 15711:2005-03 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
DIN EN ISO 15710:2006-09 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
UNI EN 13523-0 : 2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
DIN EN 13523-10:2017-05 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
BS 3900-E10(2003) : 2003 | PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
BS 3900-F13(2002) : 2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
BS 3900-C3(1990) : AMD 7501 | METHODS OF TEST FOR PAINTS - THROUGH DRY TEST |
BS 3900-E4(2001) : 2001 | PAINTS AND VARNISHES - CUPPING TEST |
BS 3900-E6(1992) : 1992 AMD 8353 | METHODS OF TEST FOR PAINTS - CROSS CUT TEST |
BS 3900-J4(1995) : 1995 | METHODS OF TEST FOR PAINTS - DETERMINATION OF THE STORAGE STABILITY OF COATING POWDERS |
ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
BS 3900-E6(2007) : 2007 | PAINTS AND VARNISHES - CROSS-CUT TEST |
BS 3900-C7(1993) : 1993 AMD 8357 | METHODS OF TEST FOR PAINTS - DETERMINATION OF THE POT-LIFE OF LIQUID SYSTEMS - PRESSURE TEST FOR STACKABILITY |
BS 3900-E2(1992) : 1992 AMD 12091 | METHODS OF TEST FOR PAINTS - SCRATCH TEST |
BS 3900-E1(2002) : 2002 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
ISO 558:1980 | Conditioning and testing — Standard atmospheres — Definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.