Skip to content
Please enter a keyword to search

  • ISO 3302-1:2014

    Current The latest, up-to-date edition.

    Rubber — Tolerances for products — Part 1: Dimensional tolerances

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  11-07-2014

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 3302-1:2014 specifies classes of dimensional tolerances and their values for moulded, extruded, and calendared solid rubber products. The relevant test methods necessary for the establishment of compliance with ISO 3302-1:2014 are also specified.

    The tolerances are primarily intended for use with vulcanized rubber but can also be suitable for products made of thermoplastic rubbers.

    ISO 3302-1:2014 does not apply to precision toroidal sealing rings or to calendared composite products such as rubber-coated fabrics or products where a rubber coating is applied by the process of topping or skim coating.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 45/SC 4
    Development Note Supersedes ISO 3302 (04/2001) Supersedes ISO/DIS 3302-1. (07/2014)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    99/123581 DC : DRAFT OCT 1999 ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS
    ISO 11040-5:2012 Prefilled syringes — Part 5: Plunger stoppers for injectables
    BS ISO 11040-5:2012 Prefilled syringes Plunger stoppers for injectables
    BS F 152:2006 Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification
    BS ISO 11040-3:2012 Prefilled syringes Seals for dental local anaesthetic cartridges
    DIN ISO 11040-5:2013-12 PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012)
    03/105599 DC : DRAFT MAY 2003 BS ISO 23529 - RUBBER - GENERAL CONDITIONS AND PROCEDURES FOR PHYSICAL TEST METHODS
    UNE-EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
    10/30216993 DC : 0 BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    05/30130019 DC : DRAFT JULY 2005 BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION
    BS EN 14840:2005 Joint fillers and sealants. Test methods for preformed joint seals
    09/30193399 DC : DRAFT MAY 2009 BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS
    BS ISO 9631:2018 Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
    BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
    I.S. EN 16397-2:2014 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    DIN ISO 23529:2012-10 RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010)
    UNE-EN 16397-2:2015 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels
    BS EN 681-2:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
    ONORM EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
    DEFSTAN 02-337(PT1)/2(2014) : 2014 REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O'-RINGS) - PART 1: GENERAL AND SURFACE FINISH STANDARDS RELATIVE TO MANUFACTURER
    NF EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
    DEFSTAN 93-55/3(2009) : 2009 BUTYL RUBBER, TYPE NBC
    BS ISO 5892:2013 Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
    ISO 17613-1:2006 Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia
    DIN EN ISO 8362-5 E : 2016 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
    PREN 681-1 : DRAFT 2016 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
    DIN EN 16397-2 E : 2015 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    BS EN 16397-2:2014 Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    10/30167702 DC : 0 BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION
    ISO 11040-3:2012 Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
    ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
    BS EN 295-4:2013 Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
    I.S. EN ISO 8536-2:2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
    DIN EN 681-4:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
    DIN EN 681-3:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
    I.S. EN 295-4:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
    03/118042 DC : DRAFT NOV 2003 EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
    BS F 157:2006 Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification
    03/308003 DC : DRAFT JUNE 2003 ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS
    12/30235141 DC : 0 BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION
    15/30317651 DC : 0 BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
    DIN EN ISO 8362-2:2016-02 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015)
    14/30293931 DC : 0 BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS
    DIN ISO 8362-5:2011-06 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
    DIN 3489:2001-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
    BS ISO 17613-1:2006 Manually operated pumps for drinking water. Selection and acceptance Southeast Asia
    BS EN ISO 8362-5:2016 Injection containers and accessories Freeze drying closures for injection vials
    DIN 7865-1 E : 2015 ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 1: SHAPES AND DIMENSIONS
    BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
    ISO 9553:1997 Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors
    BS ISO 22762-3:2005 Elastomeric seismic-protection isolators Applications for buildings. Specifications
    PREN 295-4 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    UNI EN 16397-2 : 2014 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    ISO 4633:2015 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
    ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    DIN EN 14188-3:2006-04 Joint fillers and sealants - Part 3: Specifications for preformed joint seals
    DIN EN 295-4:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    DIN EN 682:2006-10 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
    BS EN 681-4:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
    UNI EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
    UNI EN 295-4 : 2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
    UNI 11401 : 2011 GUIDELINE FOR THERMAL BREAK PROFILES
    DIN EN 16397-2:2015-01 FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES
    DIN ISO 15759:2006-05 Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005)
    BS F 153:2006 Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification
    BS ISO 23529:2016 Rubber. General procedures for preparing and conditioning test pieces for physical test methods
    12/30258206 DC : 0 BS EN 16397-2 - FLEXIBLE COUPLINGS - PART 2: MATERIALS AND DIMENSIONS FOR METAL BANDED FLEXIBLE COUPLINGS
    14/30304354 DC : 0 BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
    BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
    16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    BS EN ISO 8362-2:2015 Injection containers and accessories Closures for injection vials
    BS ISO 13926-2:2017 Pen systems Plunger stoppers for pen-injectors for medical use
    DIN EN 14840 E : 2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
    16/30334927 DC : 0 BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS
    DIN EN ISO 8362-5:2016-07 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
    04/30112025 DC : DRAFT APR 2004 ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
    NF ISO 8362-5 : 2008 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
    DIN ISO 11040-5 E : 2013 PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012)
    BS ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels
    I.S. EN ISO 8362-5:2016 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
    16/30318653 DC : 0 BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
    18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels
    ISO 23711:2003 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
    ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
    ISO 13926-2:2017 Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
    I.S. EN ISO 8362-2:2015 INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015)
    DIN EN ISO 8536-2:2010-08 Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010)
    DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    ISO 8536-2:2010 Infusion equipment for medical use — Part 2: Closures for infusion bottles
    BS EN 681-3:2000 Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber
    UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
    BS EN 14188-3 : 2005 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
    ISO 8362-5:2016 Injection containers and accessories Part 5: Freeze drying closures for injection vials
    ISO 8362-2:2015 Injection containers and accessories — Part 2: Closures for injection vials
    BS EN ISO 8536-2:2010 Infusion equipment for medical use Closures for infusion bottles
    BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
    BS EN 682:2002 Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
    EN 681-4:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
    EN 14188-3 : 2006 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
    EN ISO 8536-2:2010 Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010)
    EN 14840 : 2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
    EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
    EN 681-3:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER
    EN 16397-2:2014 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
    EN 682:2002/A1:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
    EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
    EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
    EN ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015)
    03/308002 DC : DRAFT JUNE 2003 ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS
    03/118041 DC : DRAFT NOV 2003 EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS
    BS ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels
    14/30301958 DC : 0 BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION
    ISO 4635:2011 Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification
    BS ISO 22762-2:2005 Elastomeric seismic-protection isolators Applications for bridges. Specifications
    I.S. EN 14840:2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
    ISO 5892:2013 Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification
    ISO 15759:2005 Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
    EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
    UNE-EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
    DIN 7865-1:2015-02 ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 1: SHAPES AND DIMENSIONS
    DIN EN 14840:2005-12 Joint fillers and sealants - Test methods for preformed joint seals
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective