• ISO 34-1:2015

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  27-06-2022

    Language(s):  French, English

    Published date:  02-06-2015

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 34-1:2015 specifies three test methods for the determination of the tear strength of vulcanized or thermoplastic rubber, namely the following:

    - method A, using a trouser test piece;

    - method B, using an angle test piece, with or without a nick of specified depth;

    - method C, using a crescent test piece with a nick.

    The value of tear strength obtained depends on the shape of the test piece, speed of stretching, and temperature of test. It can also be susceptible to grain effects in rubber.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO 34 (04/2001) Supersedes ISO/DIS 34-1. (06/2015)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 13361 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    16/30338108 DC : DRAFT JULY 2016 BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
    12/30250853 DC : 0 BS ISO 17357-2 - SHIPS AND MARINE TECHNOLOGY - FLOATING PNEUMATIC RUBBER FENDERS - PART 2: LOW PRESSURE
    PREN 13491 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    16/30338114 DC : 0 BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
    BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
    ISO 17357-1:2014 Ships and marine technology — Floating pneumatic rubber fenders — Part 1: High pressure
    16/30338123 DC : 0 BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS
    VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    13/30287178 DC : 0 BS ISO 17325-2 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - OIL BOOMS - PART 2: STRENGTH AND PERFORMANCE REQUIREMENTS
    08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
    ISO 20872:2018 Footwear — Test methods for outsoles — Tear strength
    13/30290552 DC : 0 BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
    PREN 12199 : DRAFT 2009 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    07/30148747 DC : 0 EN ISO 8067 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH
    12/30267857 DC : 0 BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    13/30266235 DC : 0 BS ISO 17325-1 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - OIL BOOMS - PART 1: DESIGN REQUIREMENTS
    12/30267848 DC : 0 BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    05/30130019 DC : DRAFT JULY 2005 BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION
    UNI EN ISO 23936-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
    I.S. EN ISO 14607:2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018)
    API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
    I.S. EN 16993:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS
    ISO 17325-2:2014 Ships and marine technology Marine environment protection Oil booms Part 2: Strength and performance requirements
    BS EN 13493:2013 Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
    UNE-EN 15382:2013 Geosynthetic barriers - Characteristics required for use in transportation infrastructure
    UNE-EN 13492:2013 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
    BS EN 15382:2013 Geosynthetic barriers. Characteristics required for use in transportation infrastructure
    EN 13491:2018 Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
    ISO 14607:2007 Non-active surgical implants Mammary implants Particular requirements
    ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
    BS EN 13492:2013 Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
    I.S. EN 15090:2012 FOOTWEAR FOR FIREFIGHTERS
    EN ISO 20344:2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
    DIN EN 13492:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    DIN EN 15090:2012-04 Footwear for firefighters
    DIN EN 15382:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    ASME BPE : 2016 BIOPROCESSING EQUIPMENT
    12/30267845 DC : 0 BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    BS ISO 6446:1994 Rubber products. Bridge bearings. Specification for rubber materials
    DIN EN 15382 E : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    14/30304385 DC : 0 BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES
    BS 903-A3.3.2(1997) : 1997 PHYSICAL TESTING OF RUBBER - DETERMINATION OF TEAR STRENGTH - SMALL (DELFT) TEST PIECES
    BS EN 16994:2018 Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
    14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
    API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
    09/30200146 DC : 0 BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
    BS ISO 17357-2:2014 Ships and marine technology. Floating pneumatic rubber fenders Low pressure
    BS ISO 14910-2 : 1997 AMD 16024 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    PREN 4691-1 : DRAFT 2015 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
    ISO 17357-2:2014 Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure
    ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
    CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    ANSI/AAMI/ISO 15676:2016 CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
    DIN EN 13361:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    BS EN ISO 14607:2009 Non-active surgical implants. Mammary implants. Particular requirements
    UNI EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
    DIN EN 13491:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    DIN EN 15382:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    DIN EN 13492:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    BS EN 16993:2018 Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
    UNE-EN 13493:2013 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
    PREN 13362 : DRAFT 2012 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    DIN EN 13493:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    DIN EN 1337-3:2005-07 Structural bearings - Part 3: Elastomeric bearings
    DIN EN 15090 E : 2012 FOOTWEAR FOR FIREFIGHTERS
    DIN EN 13361:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
    UNE-EN ISO 20344:2012 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
    EN 61854:1998 Overhead lines - Requirements and tests for spacers
    UNI EN 12199 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    I.S. EN ISO 20344:2011 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
    I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
    I.S. EN 13787:2002 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
    16/30338117 DC : 0 BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    PD ISO/TS 16097:2013 Vulcanized crumb rubber. Evaluation procedures
    14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
    10/30219184 DC : 0 BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
    UNE-ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
    DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    UNE-EN 13361:2013 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
    13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 14409 : 2013 SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS
    ISO 34-2:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces
    NF ISO 14409 : 2011 SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS
    I.S. EN 13492:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    I.S. EN ISO 28017:2018 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018)
    I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
    I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    UNE-EN 13491:2013 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
    DIN EN ISO 14607:2009-08 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
    I.S. EN 13491:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
    DIN EN 13362:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    ISO 17357:2002 Ships and marine technology High-pressure floating pneumatic rubber fenders
    NF EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
    EN 13493:2018 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
    ISO 14409:2011 Ships and marine technology — Ship launching air bags
    EN ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
    EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
    I.S. EN 13362:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    DIN EN 1337-3 E : 2005 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
    DIN EN ISO 20344 E : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
    BS EN 12199:2010 Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
    UNI EN ISO 20344 : 2012 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
    UNI EN 15090 : 2012 FOOTWEAR FOR FIREFIGHTERS
    UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
    ISO 14949:2001 Implants for surgery — Two-part addition-cure silicone elastomers
    BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces
    12/30267854 DC : 0 BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN CONSTRUCTION AND TUNNELS AND ASSOCIATED UNDER GROUND STRUCTURES
    BS 903-3:2003 Physical testing of rubber Acquisition and presentation of comparable single-point data
    BS ISO 14949:2001 Implants for surgery. Two-part addition-cure silicone elastomers
    BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
    10/30212877 DC : DRAFT JUNE 2010 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
    API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
    07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
    10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
    BS ISO 17325-2:2014 Ships and marine technology. Marine environment protection. Oil booms Strength and performance requirements
    BS EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers
    BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
    10/30214883 DC : 0 BS ISO 14409 - SHIPS AND MARINE TECHNOLOGY - SHIPS LAUNCHING AIR BAG
    BS ISO 29942:2011 Prophylactic dams. Requirements and test methods
    12/30268279 DC : 0 BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    PREN 13493 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    PREN 13492 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
    NF EN 13362 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
    09/30203310 DC : 0 BS EN 15090 - FOOTWEAR FOR FIREFIGHTERS
    ISO 29942:2011 Prophylactic dams — Requirements and test methods
    PREN 3207 : 1996 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
    15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    NF EN 13492 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
    BS EN 62621 : 2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS (IEC 62621:2011)
    I.S. EN 16994:2018 CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES)
    I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
    EN 16994:2018 Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
    ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
    ISO/TS 16097:2013 Vulcanized crumb rubber — Evaluation procedures
    UNE-EN 13362:2013 Geosynthetic barriers - Characteristics required for use in the construction of canals
    NF EN 13493 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    DIN EN ISO 28017:2015-12 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015)
    NF EN 15382 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    18/30365845 DC : 0 BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
    ISO 16365-2:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
    EN 15382:2018 Geosynthetic barriers - Characteristics required for use in transportation infrastructure
    EN 13492:2018 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
    ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
    ISO 15676:2016 Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
    EN ISO 14607:2018 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08)
    I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
    ISO 17325-1:2014 Ships and marine technology Marine environment protection Oil booms Part 1: Design requirements
    I.S. EN 13493:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    I.S. EN 15382:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    IEC 61854:1998 Overhead lines - Requirements and tests for spacers
    UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
    DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
    UNE-EN 15090:2012 Footwear for firefighters
    IEC 62621:2011 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
    DIN EN ISO 20344:2013-02 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
    EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
    EN 12199:2010 Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
    UNE-EN 62621:2016 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
    BS EN 1337-3:2005 Structural bearings Elastomeric bearings
    ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
    I.S. EN 12199:2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    BS EN 15090:2012 Footwear for firefighters
    BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
    BS EN 3207:1998 Rubber compounds. Technical specification
    BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
    EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
    EN 15090:2012 Footwear for firefighters
    EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011)
    EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
    EN 16993:2018 Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
    EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
    EN 3207 : 1998 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
    BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
    04/30123435 DC : DRAFT OCT 2004 IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS
    16/30338105 DC : 0 BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES)
    I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
    PREN 1337-3 : DRAFT 2018 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
    BS ISO 17357-1:2014 Ships and marine technology. Floating pneumatic rubber fenders High pressure
    BS ISO 17325-1:2014 Ships and marine technology. Marine environment protection. Oil booms Design requirements
    09/30210233 DC : 0 BS EN 12199 - RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    12/30267851 DC : 0 BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    16/30338111 DC : 0 BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    15/30314236 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
    NF EN 13491 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
    16/30338120 DC : 0 BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
    ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification
    PD IEC/TR 62039:2007 Selection guide for polymeric materials for outdoor use under HV stress
    16/30338126 DC : 0 BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
    I.S. EN 62621:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
    I.S. EN ISO 23936-2:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011)
    ISO 6446:1994 Rubber products — Bridge bearings — Specification for rubber materials
    API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
    BS ISO 17357:2002 Ships and marine technology. High-pressure floating pneumatic rubber fenders
    BS EN 13362:2018 Geosynthetic Barriers. Characteristics required for use in the construction of canals
    EN 13362:2018 Geosynthetic Barriers - Characteristics required for use in the construction of canals
    PREN 15090 : DRAFT 2009 FOOTWEAR FOR FIREFIGHTERS
    NF EN 13361 : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    DIN EN 12199:2010-11 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    NF EN 12199 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
    IEC TR 62039:2007 Selection guide for polymeric materials for outdoor use under HV stress
    ISO 20344:2011 Personal protective equipment Test methods for footwear
    BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
    ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
    BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
    BS EN 12771:2000 Footwear. Test methods for outsoles. Tear strength
    DIN EN 13362:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    DIN EN 13493:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
    EN 12771 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH
    EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings
    DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
    EN 62621:2016/A1:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    ISO 5893:2002 Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification
    ISO 6133:2015 Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
    ISO 18899:2013 Rubber — Guide to the calibration of test equipment
    ISO/TR 9272:2005 Rubber and rubber products Determination of precision for test method standards
    ISO 34-2:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective