Skip to content
Please enter a keyword to search

  • ISO 3506-3:2009

    Current The latest, up-to-date edition.

    Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  29-10-2009

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 3506-3:2009 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel, when tested over an ambient temperature range of 10 C to 35 C. Properties vary at higher or lower temperatures.

    ISO 3506-3:2009 applies to set screws and similar fasteners:

    - with nominal thread diameter 1,6 mm d 24 mm;

    - of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262;

    - of any shape.

    It does not apply to screws with special properties, such as weldability.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO 3506 (04/2001) Supersedes ISO/DIS 3506-3. (11/2009)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    16/30341810 DC : 0 BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
    16/30341790 DC : 0 BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS
    BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
    NF EN ISO 4766 : 2011 SLOTTED SET SCREWS WITH FLAT POINT
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    IEC 60335-2-37:2017 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
    I.S. EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
    ISO 4029:2003 Hexagon socket set screws with cup point
    BS EN ISO 4029:2003 Hexagon socket set screws with cup point
    DIN EN ISO 4029:2004-05 Hexagon socket set screws with cup point (ISO 4029:2003)
    DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    DIN EN ISO 16048:2003-06 PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS
    EN 12255-1:2002 Wastewater treatment plants - Part 1: General construction principles
    EN ISO 4029:2003 Hexagon socket set screws with cup point (ISO 4029:2003)
    IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
    ISO 16228:2017 Fasteners — Types of inspection documents
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
    BS EN ISO 4027:2003 Hexagon socket set screws with cone point
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    ONORM EN 1993-1-4 : 2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
    KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
    KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
    DIN EN ISO 4766:2011-11 Slotted set screws with flat point (ISO 4766:2011)
    IEC 60335-2-36:2017 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
    18/30351048 DC : 0 BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS
    I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
    16/30341798 DC : 0 BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM
    09/30208236 DC : 0 BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT
    UNI EN ISO 4766 : 2012 SLOTTED SET SCREWS WITH FLAT POINT
    DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    DIN ISO 8992:2005-09 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
    15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    PREN ISO 4766 : DRAFT 2009 SLOTTED SET SCREWS WITH FLAT POINT
    UNE-EN ISO 4766:2012 Slotted set screws with flat point (ISO 4766:2011)
    IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
    EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
    ISO 4028:2003 Hexagon socket set screws with dog point
    BS EN ISO 4028:2003 Hexagon socket set screws with dog point
    IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
    IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
    EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
    BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
    BS EN ISO 16228:2018 Fasteners. Types of inspection documents
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    IEC 60335-2-39:2012+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
    BS EN ISO 2342:2003 Slotted headless screws with shank
    BS EN ISO 3269:2001 Fasteners. Acceptance inspection
    ISO 3269:2000 Fasteners Acceptance inspection
    IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
    BS EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
    IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
    ISO 2342:2003 Slotted headless screws with shank
    IEC 60335-2-99:2003+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
    ISO 4766:2011 Slotted set screws with flat point
    IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
    IEC 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
    IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
    BS EN 12255-1:2002 Wastewater treatment plants General construction principles
    ISO 4026:2003 Hexagon socket set screws with flat point
    ISO 4027:2003 Hexagon socket set screws with cone point
    DIN EN ISO 4026:2004-05 Hexagon socket set screws with flat point (ISO 4026:2003)
    DIN EN ISO 4028:2004-05 Hexagon socket set screws with dog point (ISO 4028:2003)
    EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)
    EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)
    EN ISO 4027:2003 Hexagon socket set screws with cone point (ISO 4027:2003)
    EN ISO 4026:2003 Hexagon socket set screws with flat point (ISO 4026:2003)
    EN ISO 2342:2003 Slotted headless screws with shank (ISO 2342:2003)
    EN ISO 4028 : 2003 Hexagon socket set screws with dog point (ISO 4028:2003)
    BS EN ISO 4766:2011 Slotted set screws with flat point
    DIN 19558:2002-12 WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT
    16/30341794 DC : 0 BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS
    BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
    I.S. EN ISO 4766:2011 SLOTTED SET SCREWS WITH FLAT POINT
    I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    BS EN ISO 4026:2003 Hexagon socket set screws with flat point
    EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN ISO 2342:2004-05 Slotted headless screws with shank (ISO 2342:2003)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    ISO 683-13:1974 Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels
    ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
    ISO 16426:2002 Fasteners — Quality assurance system
    ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
    ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
    ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
    ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
    ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
    ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
    ISO 261:1998 ISO general purpose metric screw threads General plan
    ISO 965-3:1998 ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
    ISO 4954:1993 Steels for cold heading and cold extruding
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective