ISO 3746:2010

Current

Current The latest, up-to-date edition.

Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French

Published date: 25-11-2010

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 3746:2010 specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping a noise source (machinery or equipment) in a test environment for which requirements are given. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source with frequency A-weighting applied is calculated using those measurements.

The methods specified in ISO 3746:2010 are suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.

ISO 3746:2010 is applicable to all types and sizes of noise source (e.g. stationary or slowly moving plant, installation, machine, component or sub-assembly), provided the conditions for the measurements can be met.

The test environments that are applicable for measurements made in accordance with ISO 3746:2010 can be located indoors or outdoors, with one or more sound-reflecting planes present on or near which the noise source under test is mounted.

Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with ISO 3746:2010, for measurements made with frequency A-weighting applied. The uncertainty conforms with that of ISO 12001:1996, accuracy grade 3 (survey grade).

General Product Information - (Show below) - (Hide below)

Committee	ISO/TC 43/SC 1
Development Note	Supersedes ISO 495 (04/2001) Supersedes ISO/DIS 3746. (11/2010) Also numbered as ANSI S12.56. (07/2011)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO 3746:1995 ISO 3746:1995/Cor 1:1995

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 3746 : 2011	Identical
GOST R ISO 3746 : 2013	Identical
NF EN ISO 3746 : 2012	Identical
NBN EN ISO 3746 : 2011	Identical
NEN EN ISO 3746 : 2010	Identical
NS EN ISO 3746 : 2010	Identical
I.S. EN ISO 3746:2010	Identical
PN EN ISO 3746 : 2011	Identical
SANS 3746 : 2ED 2012	Identical
SN EN ISO 3746:2011	Identical
UNI EN ISO 3746 : 2011	Identical
AS 5337:2019	Identical
SS-EN ISO 3746 : 2010	Identical
BS EN ISO 3746:2009	Identical
EN ISO 3746:2010	Identical
DIN EN ISO 3746:2011-03	Identical
KS I ISO 3746: translated 2016	Identical
UNE-EN ISO 3746:2010	Identical
NFS 31 027 : 1977	Identical
NBN ISO 3746 : 1992	Identical
NBN C 90 202 : 1983	Identical
BS EN ISO 3746:2010 (published 2010-12)	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 1422 : DRAFT 2011	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN 45635-1:1984-04	MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; ENVELOPING SURFACE METHOD; BASIC REQUIREMENTS FOR 3 ACCURACY CLASSES
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ONORM EN ISO 9902-6 : 2014	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN ISO 11202:2010-10	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
DIN EN 23742:1991-11	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS
14/30275192 DC : 0	BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
10/30094845 DC : 0	BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS
BS ISO 9902 : 1993	TEXTILE MACHINERY ACOUSTICS - DETERMINATION OF SOUND PRESSURE LEVELS AND SOUND POWER LEVELS EMITTED BY TEXTILE MACHINES - ENGINEERING AND SURVEY METHODS
BS EN 60349-1 : 2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
I.S. EN 16252:2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
18/30369931 DC : 0	BS EN ISO 9902-6 - TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
CEI EN 60349-4 : 2014	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
DIN EN 13035-11:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
BS EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
PREN 13487 : DRAFT 2017	HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
UNI EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
01/562316 DC : DRAFT JULY 2001	BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
BS EN ISO 80601-2-13:2012	Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
BS 4196-0(1981) : 1981	SOUND POWER LEVELS OF NOISE SOURCES - GUIDE FOR THE USE OF BASIC STANDARDS AND FOR THE PREPARATION OF NOISE TEST CODES
I.S. EN 16232:2013	CHILD USE AND CARE ARTICLES - INFANT SWINGS
UNE-EN ISO 4414:2011	Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
IEC 60076-10-1:2016	Power transformers - Part 10-1: Determination of sound levels - Application guide
DIN ISO 8525:2013-01	AIRBORNE NOISE EMITTED BY MACHINE TOOLS - OPERATING CONDITIONS FOR METAL-CUTTING MACHINES (ISO 8525:2008)
DIN EN 415-9:2010-02	Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
11/30237566 DC : 0	BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 17966 : 2016	ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
00/561015 DC : DRAFT FEB 2000	BS EN ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OFNOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOICAND HEMI-ANECHOIC ROOMS
04/30088537 DC : DRAFT SEP 2004	PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM
PREN 17180 : DRAFT 2017	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
98/715898 DC : DRAFT OCT 1998	ISO/CD 8579-1 - ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
UNI EN ISO 21649 : 2009	NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 5199:2002	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
08/30182786 DC : DRAFT JULY 2008	BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
17/30309708 DC : 0	BS EN ISO 3740 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 285:2015	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
DIN EN 16252:2013-03	Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
BS ISO 15664:2001	Acoustics. Noise control design procedures for open plant
10/30231432 DC : 0	BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
BS EN 415-9:2009 (published 2009-09)	Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
UNE-EN 1870-13:2008	Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
BS EN ISO 20361 : 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN ISO 16093:2017	Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
12/30262894 DC : 0	BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
11/30249083 DC : 0	BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
I.S. EN 12639:2000	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
02/124462 DC : DRAFT DEC 2002	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 1870-19 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
10/30162951 DC : DRAFT MAY 2010	BS EN 61973 - HIGH VOLTAGE DIRECT CURRENT (HVDC) SUBSTATION AUDIBLE NOISE
09/30206358 DC : DRAFT SEP 2009	BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 691-1:2013-01	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
13/30293370 DC : 0	BS EN 60076-10-1/IEC 60076-10-1 - POWER TRANSFORMERS - PART 10-1: DETERMINATION OF SOUND LEVELS - APPLICATION GUIDE
ISO/TS 22595-1:2006	Dentistry Plant area equipment Part 1: Suction systems
DIN ISO 10083:2008-12	OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
I.S. EN 13035-11:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
I.S. EN 1870-1:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
12/30272422 DC : 0	BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
CEI UNI EN 45510-4-5 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT
DIN EN 1870-19:2014-03	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
PREN 12013 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
11/30249219 DC : 0	BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
BS 4196-1(1991) : 1991	SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR BROADBAND SOURCES IN REVERBERATION ROOMS
12/30240135 DC : 0	BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
DIN EN ISO 3744:2011-02	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
HI 14.6 : 2016	ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS
13/30255092 DC : 0	BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN 848-3:2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
CEI EN 50571 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
DIN EN 1672-1:2014-12	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
11/30237560 DC : 0	BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
09/30182105 DC : 0	BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN 13788:2002	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
ANSI S12.53/2 : 1999	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
I.S. EN 848-1:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS 4196-2(1991) : 1991	SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
NF EN 61063 : 2003	ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY STEAM TURBINES AND DRIVEN MACHINERY
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DD ISO/TS 7849-1 : 2009	ACOUSTICS - DETERMINATION OF AIRBORNE SOUND POWER LEVELS EMITTED BY MACHINERY USING VIBRATION MEASUREMENT - PART 1: SURVEY METHOD USING A FIXED RADIATION FACTOR
04/30122794 DC : DRAFT SEP 2004	EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
12/30261215 DC : 0	BS EN 13060 - SMALL STEAM STERILIZERS
16/30318924 DC : 0	BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
DIN EN 23741:1991-11	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS
I.S. EN 1870-13:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
16/30341470 DC : 0	BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
BS ISO 9611 : 1996	ACOUSTICS - CHARACTERIZATION OF SOURCES OF STRUCTURE-BORNE SOUND WITH RESPECT TO SOUND RADIATION FROM CONNECTED STRUCTURES - MEASUREMENT OF VELOCITY AT THE CONTACT POINTS OF MACHINERY WHEN RESILIENTLY MOUNTED
13/30276220 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
PREN 15571 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
ISO 9902:1993	Textile machinery acoustics Determination of sound pressure levels and sound power levels emitted by textile machines Engineering and survey methods
I.S. EN 692:2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
PREN 848-3 : DRAFT 2010	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
16/30318928 DC : 0	BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
DIN EN 15572:2015-12	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
07/30161654 DC : 0	BS ISO 8525 - AIRBORNE NOISE EMITTED BY MACHINE TOOLS - OPERATING CONDITIONS FOR METAL-CUTTING MACHINES
ISO 19085-1:2017	Woodworking machines Safety Part 1: Common requirements
IEC 62006:2010