ISO 5221:1984
|
Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct |
DIN EN ISO 5802:2016-02
|
INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001 + AMD 1:2015) |
ISO 10780:1994
|
Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts |
BS EN ISO 15012-4:2016
|
Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements |
11/30239461 DC : 0
|
BS EN ISO 16911-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF VELOCITY AND VOLUMETRIC FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
BS ISO 5801 : 2007
|
INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
08/30165047 DC : DRAFT JUNE 2008
|
BS EN ISO 9906 - ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
17/30326671 DC : 0
|
BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
17/30285147 DC : 0
|
BS ISO 18326 - SINGLE-DUCT PORTABLE AIRCONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
09/30190929 DC : 0
|
BS ISO 29042-5 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 5: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH UNDUCTED OUTLET |
05/30136094 DC : DRAFT JULY 2005
|
ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
BS EN 16211:2015
|
Ventilation for buildings. Measurement of air flows on site. Methods |
15/30284307 DC : 0
|
BS ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
15/30321263 DC : 0
|
BS EN 62828-5 ED. 1.0 - PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 5: SPECIFIC PROCEDURES FOR FLOW TRANSMITTERS |
PREN 1859 : DRAFT 2008
|
CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
BS 7526(1991) : 1991 AMD 7980
|
METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETERS |
EN 61400-12-1:2017
|
Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines |
ISO 15042:2017
|
Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance |
CSA C748 : 2013
|
PERFORMANCE OF DIRECT-EXPANSION (DX) GROUND-SOURCE HEAT PUMPS |
ISO 29042-1:2008
|
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
ISO 29042-9:2011
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 9: Decontamination index |
PREN 15695-1 : DRAFT 2015
|
AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
ISO 12141:2002
|
Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method |
17/30332894 DC : 0
|
BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
UNE-EN 15695-1:2018
|
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
ISO 16956:2015
|
Thermal performance in the built environment Determination of air flow rate in building applications by field measuring methods |
UNE-EN ISO 5801:2010
|
Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) |
DIN EN 1093-11:2008-11
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
DIN EN ISO 9906 E : 2013
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
BS EN 13181:2001
|
Ventilation for buildings. Terminals. Performance testing of louvres. Performance testing of louvres subject to simulated sand |
BS EN 13741:2003
|
Thermal performance acceptance testing of mechanical draught series wet cooling towers |
DIN EN 13741:2004-05
|
Thermal performance acceptance testing of mechanical draught series wet cooling towers |
EN 12589:2001
|
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
EN 1093-6:1998+A1:2008
|
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
EN 12238:2001
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
EN 13181:2001
|
Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand |
BS EN ISO 7235:2009
|
Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
VDI/VDE 2640 Blatt 2:1981-11
|
Measurement of water flow in closed conduits; velocity-area method |
08/30161739 DC : DRAFT MAY 2008
|
BS EN ISO 11771 - AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
17/30335786 DC : 0
|
BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
BS 5316-2:1977
|
Specification for acceptance tests for centrifugal, mixed flow and axial pumps Class B tests |
BS 1042-2.2:1983
|
Measurement of fluid flow in closed conduits. Velocity area methods Method of measurement of velocity at one point of a conduit of circular cross section |
98/719326 DC : DRAFT DEC 1998
|
ISO/CD 15042 - MULTI-SPLIT SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
ISO 16494:2014
|
Heat recovery ventilators and energy recovery ventilators Method of test for performance |
06/19982093 DC : DRAFT AUG 2006
|
|
BS ISO 13253:2017
|
Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
08/30188933 DC : DRAFT SEP 2008
|
BS EN 15854 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - AERODYNAMIC TESTING AND RATING FOR MIXING FLOW APPLICATION - NON-ISOTHERMAL PROCEDURE FOR A COLD JET |
BS ISO 5151:2017
|
Non-ducted air conditioners and heat pumps. Testing and rating for performance |
01/714475 DC : DRAFT NOV 2001
|
BS EN 14277 - VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - METHOD FOR AIRFLOW MEASUREMENT BY CALIBRATED SENSORS IN ATD/PLENUM BOXES |
BS EN ISO 11771:2010
|
Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
AHRI 1230 : 2010 ADD 2 2014
|
PERFORMANCE RATING OF VARIABLE REFRIGERANT FLOW (VRF) MULTI-SPLIT AIR-CONDITIONING AND HEAT PUMP EQUIPMENT |
PREN 13053 : DRAFT 2017
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
15/30329410 DC : 0
|
BS EN 15695-1 - AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
CSA C13256.1 : 2001 : R2016
|
WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
ISO 13253:2017
|
Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
ISO 19867-1:2018
|
Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
BS EN ISO 5802 : 2008
|
INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU |
BS EN 15695-1:2017
|
Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances Cab classification, requirements and test procedures |
UNE-EN 50399:2012
|
Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
IEC 62006:2010
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
S.R. CEN/TR 12101-4:2009
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
I.S. EN 13053:2006
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
DIN EN 1751:2014-06
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
BS EN 12589:2001
|
Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units |
BS EN 29104:1993
|
Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids |
BS EN 1093-6 : 1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
I.S. EN 1093-6:1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
I.S. EN ISO 7235:2009
|
ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
DIN EN 13053:2012-02
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
DIN EN 1859:2013-07
|
Chimneys - Metal chimneys - Test methods (includes Amendment A1:2013) |
I.S. EN 1751:2014
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
I.S. EN 1093-11:2001
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
I.S. EN ISO 9906:2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
I.S. EN 1093-7:1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
DIN EN 1751:1999-01
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPERS AND VALVES |
I.S. EN 1859:2009
|
CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
DIN EN ISO 7235:2010-01
|
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
BS 848-1:1980
|
Fans for general purposes Methods of testing performance |
BS 5991:2006
|
Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
VDI 2066 Blatt 1:1975-10
|
Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
BS 848-1:1997
|
Fans for general purposes Performance testing using standardized airways |
VDI 2044:2002-11
|
Acceptance and performance tests on fans (VDI code of practice for fans) |
BS 848-1(2007) : 2007 COR 2010
|
INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
BS 5990:2006
|
Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
UNE-EN 16211:2016
|
Ventilation for buildings - Measurement of air flows on site - Methods |
ISO 11520-1:1997
|
Agricultural grain driers Determination of drying performance Part 1: General |
CSA C13256.1:2001
|
WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
BS 848-3(2001) : 2001
|
FANS FOR GENERAL PURPOSE - PART 3: PERFORMANCE TESTING IN SITU |
BS ISO 12141:2002
|
Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method |
UNE-EN 62006:2011
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
16/30304294 DC : 0
|
BS EN 16989 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - FIRE BEHAVIOUR TEST FOR A COMPLETE SEAT |
BS EN ISO 5801:2017
|
Fans. Performance testing using standardized airways |
I.S. EN 50399:2011
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
EN ISO 5801:2017
|
Fans - Performance testing using standardized airways (ISO 5801:2017) |
SAE J 2084 : 2016
|
AERODYNAMIC TESTING OF ROAD VEHICLES - TESTING METHODS AND PROCEDURES |
BS ISO 16494:2014
|
Heat recovery ventilators and energy recovery ventilators. Method of test for performance |
03/316891 DC : DRAFT OCT 2003
|
EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
BS ISO 16956:2015
|
Thermal performance in the built environment. Determination of air flow rate in building applications by field measuring methods |
ISO 21904-3:2018
|
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices |
BS ISO 7194:2008
|
Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes |
CAN/CSA-IEC 61400-12-1:17
|
Wind energy generation systems — Part 12-1: Power performance measurements of electricity producing wind turbines (Adopted IEC 61400-12-1:2017, second edition, 2017-03) | Systèmes de génération d’énergie éolienne — Partie 12-1 : Mesures de performance de puissance des éoliennes de production d’électricité (norme IEC 61400-12-1:2017 adoptée, deuxième édition, 2017-03) |
BS EN 50399:2011
|
Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results |
ISO 29042-6:2010
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
I.S. EN ISO 21904-3:2018
|
HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 3: DETERMINATION OF THE CAPTURE EFFICIENCY OF ON-TORCH WELDING FUME EXTRACTION DEVICES (ISO 21904-3:2018) |
I.S. EN 61400-12-1:2017
|
WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
ISO 7194:2008
|
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
NF EN 50399 : 2012 AMD 1 2016
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
CEI EN 60041 : 1997
|
FIELD ACCEPTANCE TESTS TO DETERMINE THE HYDRAULIC PERFORMANCE OF HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
EN 62006:2011
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
API 551 : 2016
|
PROCESS MEASUREMENT |
IEC 61400-12-1:2017
|
Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines |
IEC 61400-12-1 REDLINE : 2ED 2017
|
WIND ENERGY GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
DIN EN 1093-6:2008-11
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
DIN EN 1093-7:2008-11
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
UNE-EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
ISO 5802:2001
|
Industrial fans — Performance testing in situ |
BS EN 12238:2001
|
Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow application |
BS EN ISO 9906:2012
|
Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
DIN EN ISO 9906:2013-03
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
BS EN 13053 : 2006
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
ASTM F 2519 : 2005 : R2011 : EDT 1
|
Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors |
ASTM F 2519 : 2005 : R2011
|
Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors |
ASTM F 2519 : 2005 : R2015
|
Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors |
I.S. EN 13823:2010
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
ASTM F 2519 : 2005
|
Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors |
UNI EN 13823 : 2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 13741:2003
|
Thermal performance acceptance testing of mechanical draught series wet cooling towers |
EN ISO 15012-4:2016
|
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) |
UNI EN 1093-6 : 2008
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
UNI EN 1751 : 2014
|
VENTILATION FOR BUILDINGS - AIR TERMINAL DEVICES - AERODYNAMIC TESTING OF DAMPER AND VALVES |
UNI EN ISO 9906 : 2012
|
ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
UNI EN ISO 7235 : 2009
|
ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
UNI EN ISO 16911-1 : 2013
|
STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
UNI EN 1859 : 2013
|
CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
UNI EN 1093-11 : 2008
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
UNI EN 1093-7 : 2008
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
14/30285986 DC : 0
|
BS ISO 16956 - THERMAL PERFORMANCE IN THE BUILT ENVIRONMENT - DETERMINATION OF AIR FLOW RATE IN BUILDING APPLICATIONS BY FIELD MEASURING METHODS |
ISO 5801:2017
|
Fans — Performance testing using standardized airways |
DIN EN ISO 11771:2011-04
|
Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
13/30272402 DC : 0
|
BS EN 16475-3 - CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS AND STANDSTILL OPENING DEVICES - REQUIREMENTS AND TEST METHODS |
HI 14.6 : 2016
|
ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
BS ISO 15042:2017
|
Multiple split-system air conditioners and air-to-air heat pumps. Testing and rating for performance |
ISO 29042-5:2010
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
CEN/TR 12101-4:2009
|
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
07/30164823 DC : 0
|
BS EN 15695-2 - AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY - PROTECTION AGAINST HAZARDOUS SUBSTANCES - PART 2: AIR PURIFYING DEVICES |
05/30136105 DC : DRAFT JULY 2005
|
ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
ISO 5151:2017
|
Non-ducted air conditioners and heat pumps — Testing and rating for performance |
CEI UNI EN 45510-4-2 : 1999
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 2: GAS-AIR, STEAM-AIR AND GAS-GAS HEATERS |
14/30284736 DC : 0
|
BS EN ISO 5801 - FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
CEI EN 61400-12-1 : 2007
|
WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
12/30255198 DC : 0
|
BS ISO 16494 - HEAT RECOVERY VENTILATORS AND ENERGY RECOVERY VENTILATORS - METHOD OF TEST FOR PERFORMANCE |
DIN EN 16211:2015-09
|
Ventilation for buildings - Measurement of air flows on site - Methods |
15/30284301 DC : 0
|
BS ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
BS 7405:1991
|
Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits |
03/308231 DC : 0
|
EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS |
BS EN ISO 16911-1:2013
|
Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method |
I.S. EN 16211:2015
|
VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
10/30216361 DC : 0
|
BS ISO 29042-9 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: DECONTAMINATION INDEX |
BS 6069-4.3:1992
|
Characterization of air quality. Stationary source emissions Method for the manual gravimetric determination of concentration and mass flow rate of particulate material in gas-carrying ducts |
15/30267585 DC : 0
|
BS EN 61400-12-1 ED.2 - WIND TURBINES - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES |
SAE J 1792/2 : 2015
|
SELF-PROPELLED SWEEPERS - AIR FLOW PERFORMANCE - PART 2: SUCTION/BLOWER FAN PERFORMANCE |
UNI EN ISO 11771 : 2011
|
AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
CEI EN 62006 : 2011
|
HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
17/30339487 DC : 0
|
BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
16/30344390 DC : 0
|
BS EN 13216-1 - CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
PREN 13216-1 : DRAFT 2016
|
CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
ISO 13784-1:2014
|
Reaction to fire test for sandwich panel building systems — Part 1: Small room test |
I.S. CEN TR 12101-4:2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
I.S. EN 62006:2011
|
HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
DIN EN 13823:2015-02
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
BS EN 13823:2010+A1:2014
|
Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item |
BS EN 1093-11 : 2001
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX |
ISO 5198:1987
|
Centrifugal, mixed flow and axial pumps Code for hydraulic performance tests Precision grade |
ISO 15012-4:2016
|
Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements |
BS EN ISO 5198:1999
|
Centrifugal, mixed flow and axial pumps. Code for hydraulic performance tests. Precision class |
UNI EN 13053 : 2011
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
UNE-EN ISO 7235:2010
|
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
ISO 16911-1:2013
|
Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method |
ISO 7235:2003
|
Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
UNE-EN ISO 16911-1:2013
|
Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
ISO 11771:2010
|
Air quality Determination of time-averaged mass emissions and emission factors General approach |
BS EN 1093-7 : 1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
UNE-EN 1859:2010
|
Chimneys - Metal chimneys - Test methods |
EN 16211:2015
|
Ventilation for buildings - Measurement of air flows on site - Methods |
EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
EN ISO 5198:1998
|
CENTRIFUGAL, MIXED FLOW AND AXIAL PUMPS - CODE FOR HYDRAULIC PERFORMANCE TESTS - PRECISION CLASS |
EN ISO 21904-3:2018
|
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) |
EN ISO 9906:2012
|
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
EN ISO 5802:2008/A1:2015
|
INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001/AMD 1:2015) |
EN ISO 16911-1:2013
|
Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
EN ISO 7235:2009
|
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
EN ISO 11771 : 2010
|
Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
EN 1859:2009+A1:2013
|
Chimneys - Metal chimneys - Test methods |
EN 29104 : 1993
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
UNI ISO 10397 : 2002
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF ASBESTOS PLANT EMISSIONS - METHOD BY FIBRE COUNT MEASUREMENT |
10/30240340 DC : 0
|
BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
08/30194466 DC : 0
|
BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
UNE-EN ISO 11771:2011
|
Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
BS EN 62006:2011
|
Hydraulic machines. Acceptance tests of small hydroelectric installations |
15/30284304 DC : 0
|
BS ISO 15042 - MULTIPLE SPLIT-SYSTEM AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
DIN EN ISO 16911-1:2013-06
|
Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013 |
14/30289271 DC : 0
|
BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
ANSI/AHRI/ASHRAE ISO 13256-1 : 1998 : R2012
|
WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
02/105033 DC : DRAFT AUG 2002
|
BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
ANSI/AHRI/ASHRAE ISO 13256-1:1998
|
WATER-SOURCE HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE - PART 1: WATER-TO-AIR AND BRINE-TO-AIR HEAT PUMPS |
09/30190932 DC : 0
|
BS ISO 29042-6 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH DUCTED OUTLET |
05/30136071 DC : DRAFT JULY 2005
|
ISO 13253 - DUCTED AIR-CONDITIONERS AND AIR-TO-AIR HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE |
I.S. EN ISO 5801:2017
|
FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801: 2017) |
I.S. EN ISO 15012-4:2016
|
HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016) |
I.S. EN ISO 16911-1:2013
|
STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013) |
I.S. EN 15695-1:2017
|
AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
I.S. EN ISO 11771:2010
|
AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
EN 15695-1:2017
|
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
EN 13053:2006+A1:2011
|
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
I.S. EN ISO 5802:2008
|
INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001) |
BS EN 13823 : 2010
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
BS EN 45510-4-2:1999
|
Guide for the procurement of power station equipment. Boiler auxiliaries Gas-air, steam-air and gas-gas heaters - Gas-air,steam-air and gas-gas heaters |
ISO 9906:2012
|
Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
UNE-EN 13053:2007
|
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
BS EN 1859 : 2009
|
CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
BS EN 1751:2014
|
Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves |
IEC 61400-12-1:2017 RLV
|
Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines |
EN 1093-7:1998+A1:2008
|
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
EN 1093-11:2001+A1:2008
|
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
EN 50399 : 2011 AMD 1 2016
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
ASME PTC11 : 2008(R2018)
|
FANS |
UNE-EN 13823:2012
|
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |