Skip to content
Please enter a keyword to search

  • ISO 4064-2:2014

    Current The latest, up-to-date edition.

    Water meters for cold potable water and hot water Part 2: Test methods

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  26-05-2014

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4064-2:2014|OIML R 49-2:2013 is applicable to the type evaluation and initial verification testing of water meters for cold potable water and hot water as defined in ISO 40641:2014|OIML R 491:2013. OIML Certificates of Conformity can be issued for water meters under the scope of the OIML Certificate System, provided that ISO 4064-2:2014|OIML R 49-2:2013, ISO 40641:2014|OIML R 491:2013 and ISO 40643:2014|OIML R 493:2013 are used in accordance with the rules of the system.

    ISO 4064-2:2014|OIML R 49-2:2013 sets out details of the test programme, principles, equipment and procedures to be used for the type evaluation, and initial verification of a meter type.

    The provisions of ISO 4064-2:2014|OIML R 49-2:2013 also apply to ancillary devices, if required by national regulations.

    The provisions include requirements for testing the complete water meter and for testing the measurement transducer (including the flow or volume sensor) and the calculator (including the indicating device) of a water meter as separate units.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO 7858-2. (10/2005) Supersedes ISO/DIS 4064-2. (05/2014)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    11/30217189 DC : 0 BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    UNI CEI EN ISO 4064-3 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT
    DIN EN ISO 4064-3:2014-11 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT (ISO 4064-3:2014)
    I.S. EN 14154-4:2014 WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
    ISO 7858-2:2000 Measurement of water flow in closed conduits Combination meters for cold potable water Part 2: Installation requirements
    UNE-EN 1434-4:2016 Heat meters - Part 4: Pattern approval tests
    UNI CEI EN ISO 4064-1 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    ONORM EN 14154-4 : 2015 WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
    04/30031093 DC : DRAFT FEB 2004 ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
    DIN EN 14154-4:2015-02 Water meters - Part 4: Additional functionalities
    BS ISO 7858-2:2000 Measurement of water flow in closed conduits. Combination meters for cold potable water Installation requirements
    DIN EN ISO 4064-1:2016-09 (Draft) WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
    DIN EN 14154-4 E : 2015 WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
    EN 1434-4:2015 Heat meters - Part 4: Pattern approval tests
    I.S. EN 1434-4:2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    BS EN 14154-3 : 2005 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    DIN EN 1434-4:2019-08 Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018)
    BS EN 14154-4:2014 Water meters Additional functionalities
    12/30236609 DC : 0 BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1
    UNE-EN ISO 4064-3:2015 Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2014)
    UNE-EN 14154-3:2005 Water meters - Part 3 : Test methods and equipment
    UNI EN 14154-3 : 2011 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    15/30317327 DC : 0 BS EN 16941-1 - ON-SITE NON-POTABLE WATER SYSTEMS - PART 1: SYSTEMS FOR THE USE OF RAINWATER
    BS EN ISO 4064-1:2017 Water meters for cold potable water and hot water Metrological and technical requirements
    12/30236605 DC : 0 BS EN ISO 4064-3 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT
    BS EN ISO 4064-3:2014 Water meters for cold potable water and hot water Test report format
    DIN EN ISO 4064-3 E : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT (ISO 4064-3:2014)
    I.S. EN ISO 4064-3:2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT (ISO 4064-3:2014)
    UNE-EN ISO 4064-1:2015 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
    ISO 20456:2017 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
    ISO 4064-1:2014 Water meters for cold potable water and hot water Part 1: Metrological and technical requirements
    ISO 4064-3:2014 Water meters for cold potable water and hot water — Part 3: Test report format
    EN ISO 4064-1:2017 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
    EN 14154-3:2005+A2:2011 Water meters - Part 3: Test methods and equipment
    EN 14154-4:2014 Water meters - Part 4: Additional functionalities
    BS EN 1434-4 : 2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    UNE-EN 14154-4:2015 Water meters - Part 4: Additional functionalities
    BS 5728-3:1984 Measurement of flow of cold potable water in closed conduits Methods for determining principal characteristics of single meters (including test equipment)
    ISO 7714:2008 Agricultural irrigation equipment Volumetric valves General requirements and test methods
    DIN EN 1434-4:2016-02 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    ISO 16399:2014 Meters for irrigation water
    UNI EN 14154-4 : 2015 WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
    UNE-ISO 16399:2016 Meters for irrigation water
    I.S. EN ISO 4064-1:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
    DIN EN 14154-3:2011-06 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    DIN EN ISO 4064-1:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)

    Standards Referencing This Book - (Show below) - (Hide below)

    OIML R 49-3 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST REPORT FORMAT
    ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
    OIML G 13 : 1989 PLANNING OF METROLOGY AND TESTING LABORATORIES
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    IEC 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    2004/22/EC : 2004 DIRECTIVE 2004/22/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 31 MARCH 2004 ON MEASURING INSTRUMENTS
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
    IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
    IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
    ISO 4064-3:2014 Water meters for cold potable water and hot water — Part 3: Test report format
    IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    OIML B 3 : 2011 OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
    ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    IEC TR 61000-2-1:1990 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    IEC 61000-2-2:2002+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
    OIML R 49-1 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
    ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
    ISO 4064-1:2014 Water meters for cold potable water and hot water Part 1: Metrological and technical requirements
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective