ISO 4093:1999
Current
The latest, up-to-date edition.
Diesel engines Fuel injection pumps High-pressure pipes for testing
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
25-11-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This International Standard specifies the functional requirements of a range of high-pressure pipes for use on
benches for the testing and setting of fuel injection pumps intended for diesel engines.
Only dimensions and requirements affecting the hydraulic characteristics of the pipes are specified. Other
requirements, such as the type of end connections or shape of the pipes when bent, are not included as these
depend on the connections provided on the pump outlets and injector inlets, and on the design features of
individual pumps and test benches.
This International Standard applies to a range of pipes to enable the pump engine manufacturer to choose a
suitable type of pipe for pump deliveries up to 300 mm3/stroke/cylinder. The particular pipe to be used shall be
identified by the pump manufacturer in the test schedule for each individual pump type and application.
| DevelopmentNote |
Supersedes SAE J 1418. (12/2015)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 4093:1999 | Identical |
| NFR 16 317 : 1979 | Identical |
| UNE 10101:1990 | Identical |
| NF ISO 4093 : 1987 | Identical |
| UNI ISO 4093 : 2001 | Identical |
| NEN ISO 4093 : 1999 | Identical |
| DIN ISO 4093:1987-03 | Identical |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| 01/708147 DC : DRAFT MAY 2001 | ISO/DIS 13555-3 - ROAD VEHICLES - DYNAMIC PROCEDURE FOR CHECKING THE TIMING OF DIESEL FUEL INJECTION - PART 3: VALIDATION OF TIMING DEVICES |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| 11/30233888 DC : 0 | BS ISO 13296 - DIESEL ENGINES - HIGH-PRESSURE FUEL INJECTION PIPE ASSEMBLIES - GENERAL REQUIREMENTS AND DIMENSIONS |
| BS ISO 14681:1998 | Diesel engines. Fuel injection pump testing. Calibrating fuel injectors |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS ISO 13296:2016 | Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions |
| BS ISO 13555-3:2004 | Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment Validation of timing devices |
| 03/308871 DC : DRAFT MAY 2003 | ISO 13296 - DIESEL ENGINES - HIGH-PRESSURE FUEL INJECTION PIPE ASSEMBLIES - GENERAL REQUIREMENTS AND DIMENSIONS |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS ISO 4008-3:1987 | Road vehicles. Fuel injection pump testing Application and test procedures |
| SAE J968/1_201509 | Diesel Injection Pump Testing - Part 1: Calibrating Nozzle and Holder Assemblies |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| 15/30329309 DC : 0 | BS ISO 13296 - DIESEL ENGINES - HIGH-PRESSURE FUEL INJECTION PIPE ASSEMBLIES - GENERAL REQUIREMENTS AND DIMENSIONS |
| ISO 13555-3:2004 | Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 3: Validation of timing measurement devices |
| ANSI B93.114M : 1987 | PNEUMATIC FLUID POWER - SYSTEMS STANDARD FOR INDUSTRIAL MACHINERY |
| ISO 13296:2016 | Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions |
| ISO 4008-3:1987 | Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures |
| ISO 8535-2:2003 | Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.