Skip to content
Please enter a keyword to search

  • ISO 4301-1:2016

    Current The latest, up-to-date edition.

    Cranes — Classification — Part 1: General

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  27-06-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4301-1:2016 establishes a general classification of cranes and mechanisms based on the service conditions, mainly expressed by the following:

    - the total number of working cycles to be carried out during the specified design life of the crane;

    - the load spectrum factor which represents the relative frequencies of loads to be handled;

    - the average displacements.

    Additional information for the user: This version uses the cycle - based classification method. If you need to use the time - based classification method please use the 1986 version.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 96/SC 10
    Development Note Supersedes ISO 4301 (04/2001) Supersedes ISO/DIS 4301-1. (06/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    06/30147145 DC : 0 EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
    ISO 8686-5:2017 Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes
    BS ISO 16881-1:2005 Cranes. Design calculation for rail wheels and associated trolley track supporting structure General
    17/30325088 DC : 0 BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES
    DIN ISO 4309 E : 2013 CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD (ISO 4309:2010)
    07/30169970 DC : DRAFT DEC 2007 BS ISO 4309:2004 - CRANES - WIRE ROPES - CODE OF PRACTICE FOR CARE AND MAINTENANCE, INSPECTION AND DISCARD
    DIN ISO 4309:2013-06 Cranes - Wire ropes - Care and maintenance, inspection and discard (ISO 4309:2010)
    ISO 17440:2014 Cranes General design Limit states and proof of competence of forged steel hooks
    04/102834 DC : DRAFT JAN 2004 ISO 16881-1 - CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
    13/30275387 DC : 0 BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
    BS EN 1570-1 : 2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
    BS ISO 4308-1:2003 CRANES AND LIFTING APPLIANCES - SELECTION OF WIRE ROPES - PART 1: GENERAL
    BS ISO 4309:2017 Cranes. Wire ropes. Care and maintenance, inspection and discard
    06/30110083 DC : 0 ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL
    CSA B354.5 : 2007 : R2016 MAST-CLIMBING WORK PLATFORMS
    09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
    ISO 4301-5:1991 Cranes — Classification — Part 5: Overhead travelling and portal bridge cranes
    I.S. 361:2013 CODE OF PRACTICE FOR THE SAFE USE OF TOWER CRANES AND SELF-ERECTING CRANES
    I.S. EN 1570-1:2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
    I.S. EN 13000:2010 CRANES - MOBILE CRANES
    EN 13000:2010+A1:2014 Cranes - Mobile cranes
    ISO 12482:2014 Cranes Monitoring for crane design working period
    DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
    BS EN 13000 : 2010 CRANES - MOBILE CRANES
    CSA S826 SERIES : 2001 : R2016 FERRY BOARDING FACILITIES
    I.S. EN 14010:2004
    DIN EN 1570:1998-08 SAFETY REQUIREMENTS FOR LIFTING TABLES
    EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
    ISO 20332:2016 Cranes Proof of competence of steel structures
    BS DD237(1996) : 1996 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - CLASSIFICATION
    PD ISO/TR 19961:2010 Cranes. Safety code on mobile cranes
    04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    03/106314 DC : 0 BS PQIR - CRANES - CONDITION MONITORING - PART 1: SPECIFICATION FOR DATA LOGGING EQUIPMENT
    02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    11/30242006 DC : DRAFT SEP 2011 BS ISO 16625 - CRANES AND HOISTS - SELECTION OF WIRE ROPES, DRUMS AND SHEAVES
    06/30151043 DC : DRAFT JUN 2006 BS ISO 4301-2 - CRANES - CLASSIFICATION - PART 2: MOBILE CRANES
    BS ISO 10972-1:1998 Cranes. Requirements for mechanisms General
    DIN EN 1570-1:2015-01 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
    BS ISO 20332:2016 Cranes. Proof of competence of steel structures
    ISO 4301-4:1989 Cranes and related equipment — Classification — Part 4: Jib cranes
    16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
    ISO/TR 25599:2005 Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations
    I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 13000:2014-11 CRANES - MOBILE CRANES
    DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
    DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
    UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
    I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    DIN EN 1570:2009-12 SAFETY REQUIREMENTS FOR LIFTING TABLES
    DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
    I.S. EN 818-7:2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
    EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
    CSA S826 SERIES : 2001 : R2006 FERRY BOARDING FACILITIES
    I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    VDI 2485:2014-04 Planning of maintenance for cranes
    12/30266226 DC : 0 BS ISO 16716 - CRANES - MONITORING FOR CRANE DESIGN LIFE
    DIN 56950-1 E : 2012 ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTION
    12/30253074 DC : 0 BS ISO 9374-3 - CRANES - INFORMATION TO BE PROVIDED FOR ENQUIRIES, ORDERS, OFFERS AND SUPPLY - PART 3: TOWER CRANES
    BS ISO 12482:2014 Cranes. Monitoring for crane design working period
    PREN 14492-1 : DRAFT 2015 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    ISO 4301-3:1993 Cranes Classification Part 3: Tower cranes
    BS ISO 16625:2013 Cranes and hoists. Selection of wire ropes, drums and sheaves
    ISO 3077:2001 Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
    ISO 16369:2007 Elevating work platforms Mast-climbing work platforms
    ISO 4308-1:2003 Cranes and lifting appliances Selection of wire ropes Part 1: General
    ISO 14518:2005 Cranes — Requirements for test loads
    ISO 4309:2017 Cranes — Wire ropes — Care and maintenance, inspection and discard
    ISO 12482-1:1995 Cranes Condition monitoring Part 1: General
    BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    BS EN 1570 : 1999 SAFETY REQUIREMENTS FOR LIFTING TABLES
    EN 1570:1998+A2:2009 Safety requirements for lifting tables
    UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    UNI EN 1570 : 2009 SAFETY REQUIREMENTS FOR LIFTING TABLES
    UNI EN 815 : 2009 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
    UNI EN 996 : 2009 PILING EQUIPMENT - SAFETY REQUIREMENTS
    UNI EN 818-7 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
    UNI EN 13000 : 2014 CRANES - MOBILE CRANES
    EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    UNI EN 14010 : 2009 SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
    UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    ISO 16881-1:2005 Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General
    14/30298206 DC : 0 BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    DIN 56950-1:2012-05 ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTIONS
    00/707658 DC : DRAFT APR 2000 PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    ISO 9374-3:2014 Cranes Information to be provided for enquiries, orders, offers and supply Part 3: Tower cranes
    12/30252148 DC : 0 BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
    BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
    NF ISO 16881-1 : 2005 CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
    PD ISO/TR 25599:2006 Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations
    CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 MAST-CLIMBING WORK PLATFORMS
    16/30335967 DC : 0 BS ISO 4309 - CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
    CSA B354.5:2007 MAST-CLIMBING WORK PLATFORMS
    NF ISO 4309 : 2018 CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
    ISO/TR 19961:2010 Cranes Safety code on mobile cranes
    I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
    DIN EN 818-7:2008-07 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
    BS EN 815 : 1997 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
    17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    BS EN 818-7 : 2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
    BS EN 996 : 1996 PILING EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    BS EN 14010 : 2003
    BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
    10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
    EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
    EN 996:1995+A3:2009 Piling equipment - Safety requirements
    EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
    EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
    EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
    DIN EN 1570-1 E : 2015 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
    97/713936 DC : DRAFT AUG 1997 PREN 13000 - CRANES - SAFETY - MOBILE CRANES
    04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    BS ISO 8686-5 : 2017 CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
    UNI ISO 4301-2 : 2011 CRANES - CLASSIFICATION - PART 2: MOBILE CRANES
    BIS IS 14475-1 : 1997(R2008) CRANES - CONDITION MONITORING - PART 1: GENERAL
    08/30180969 DC : DRAFT APR 2008 BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
    UNI ISO 4309 : 2011 CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
    ISO 4301-2:2009 Cranes Classification Part 2: Mobile cranes
    DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 13135-2:2011-07 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    DIN EN 14492-1:2015-05 (Draft) Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
    BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 815:1996-11 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
    DIN EN 815:2009-12 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
    UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
    DIN EN 996:2010-02 PILING EQUIPMENT - SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
    ISO 20332:2016 Cranes Proof of competence of steel structures
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective