• ISO 4582:2017

    Current The latest, up-to-date edition.

    Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  17-08-2017

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4582:2017 specifies methods to determine changes in colour and other appearance properties, and variations in mechanical or other properties, of plastics that have been exposed to glass-filtered solar radiation, to natural weathering or to simulated solar radiation from a laboratory source. The procedure used to analyse data depends on whether the test used to characterize the materials being exposed is destructive or non-destructive. The exposures are conducted under conditions described in specific exposure standards.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 61/SC 6
    Development Note Supersedes ISO/FDIS 4582. (08/2017)
    Document Type Standard
    Product Note THIS STANDARD ALSO REFERS-CIE Publication No. 15,ISO 75 (all parts),ISO 179 (all parts), ISO 527 (all parts), ISO 877 (all parts),ISO 4892 (all parts)
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    I.S. EN ISO 877:1997
    DIN EN ISO 29664 E : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    UNE-EN 16472:2015 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
    I.S. EN 16472:2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    DIN EN 16472:2014-06 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
    16/30344238 DC : 0 BS EN ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    12/30236297 DC : 0 BS ISO 16474-4 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: CARBON-ARC LAMPS
    07/30167330 DC : DRAFT AUG 2007 BS EN 868-8 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    BS EN ISO 30013:2011 Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
    EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS (IEC/IEEE 60079-30-1:2015, MODIFIED)
    01/107289 DC : DRAFT OCT 2001 BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS
    BS 2782-5.540F(1995) : AMD 10678 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS
    UNE-EN ISO 877-1:2011 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
    NFT 51 195-5 : 2008 PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 5: MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    07/30155372 DC : 0 BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
    09/30176542 DC : 0 BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
    09/30179580 DC : 0 BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
    UNE-EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
    ISO 7823-2:2003 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 2: Extruded sheets
    UNI EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
    I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    ONORM EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013)
    EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    EN ISO 16871 : 2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
    EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
    EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    DIN EN ISO 175:2011-03 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
    DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
    EN 1056 : 1996 METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    BS 8442:2006 MISCELLANEOUS ROAD TRAFFIC SIGNS AND DEVICES - REQUIREMENTS AND TEST METHODS
    PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
    DIN EN ISO 105-B10 E : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
    95/102726 DC : DRAFT MARCH 1995 PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS
    BS ISO 16474-4 : 2013 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: OPEN-FLAME CARBON-ARC LAMPS
    DIN EN 16472 E : 2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    BS 2782-5.550B(1996) : 1996 AMD 9494
    07/30155380 DC : 0 BS ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    BS EN ISO 877-2:2010 Plastics. Methods of exposure to solar radiation Direct weathering and exposure behind window glass
    BS EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    BS ISO 2135:2017 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
    UNI EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
    UNE-EN ISO 877-2:2011 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
    BS 2782-5.540E(1995) : 1995 AMD 10725 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - XENON-ARC SOURCES
    07/30127284 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
    ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
    ISO/TS 19022:2016 Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
    UNE-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009)
    DIN EN 868-8:2009-09 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    CAN/CSA-C22.2 NO. 60079-30-1:17 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
    CEI EN 60079-30-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
    PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    UNI EN ISO 877-2 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
    CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
    DIN EN ISO 877-3:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    UNE-EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
    ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
    BS EN 3-3 : 1996 PORTABLE FIRE EXTINGUISHERS - CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS
    BS EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
    DIN EN 1866:1998-11 MOBILE FIRE EXTINGUISHERS
    I.S. EN ISO 4892-3:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016)
    I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
    I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    DIN EN ISO 877-2:2011-03 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
    I.S. EN ISO 4892-2:2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARCLAMPS (ISO 4892-2:2013)
    I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
    I.S. EN ISO 4892-1:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
    DIN EN ISO 877-1:2011-03 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
    I.S. EN ISO 175:2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    I.S. EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
    I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
    DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    I.S. EN ISO 16871:2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    ISO 16474-4:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps
    10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning Service life prediction procedures
    11/30211716 DC : 0 BS EN ISO 4892-2 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
    UNI EN 16472 : 2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    ISO 877-3:2009 Plastics Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation
    08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    10/30205800 DC : 0 BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
    17/30368428 DC : 0 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
    BS ISO 15314:2004 PLASTICS - METHODS FOR MARINE EXPOSURE
    DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
    03/105565 DC : 0 ISO 4892-4 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: OPEN-FLAME CARBON-ARC LAMPS
    PREN 868-8 : DRAFT 2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
    I.S. EN ISO 877-1:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
    I.S. EN ISO 30013:2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
    I.S. EN ISO 29664:2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    UNE-EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
    BS 2782-5.550A(1981) : 1981 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO NATURAL WEATHERING
    DIN EN ISO 877-2:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
    BS EN 60079-30-1:2017 (published 2017-07) Explosive atmospheres Electrical resistance trace heating. General and testing requirements
    I.S. EN 868-8:2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
    ASTM G 153 : 2013 : REDLINE Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
    UNI EN 868-8 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    BS EN ISO 4892-3:2016 Plastics. Methods of exposure to laboratory light sources Fluorescent UV lamps
    BS EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
    BS EN 1866 : 2005 MOBILE FIRE EXTINGUISHERS
    ISO 877:1994 Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
    EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
    EN ISO 29664 : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    UNI EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
    UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
    EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
    UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
    UNI EN ISO 175 : 2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    UNI EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
    02/121868 DC : DRAFT APR 2002 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
    UNI EN ISO 105-B10 : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION
    UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
    11/30211719 DC : 0 BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
    DIN EN ISO 877-1:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
    BS ISO 29664 : 2010 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
    03/112830 DC : DRAFT AUG 2003 BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
    18/30344274 DC : DRAFT APR 2018 BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
    14/30253068 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
    08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
    16/30333706 DC : 0 BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
    BS EN ISO 877-1:2010 Plastics. Methods of exposure to solar radiation General guidance
    DIN EN ISO 105-B10:2012-01 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
    BS 7825-3.5:1997 CALIBRATION OF RUBBER AND PLASTICS TEST EQUIPMENT - CALIBRATION SCHEDULES - OPTICAL AND WEATHERING PROPERTIES
    07/30155375 DC : 0 BS ISO 877-2 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: EXPOSURE TO DIRECT AND GLASS- FILTERED SOLAR RADIATION
    UNE-EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
    ISO 4892-4:2013 Plastics Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps
    BS EN ISO 29664:2017 Plastics. Artificial weathering including acidic deposition
    I.S. EN ISO 105-B10:2011 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
    NF EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
    DIN EN ISO 29664:2016-09 (Draft) PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    I.S. EN ISO 877-2:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
    ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
    NF EN 868-8 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    ONORM EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    EN ISO 4892-2:2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013)
    ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
    I.S. EN ISO 877-3:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
    DIN EN ISO 4892-2:2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
    DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
    DIN EN ISO 175 E : 2011 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
    DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
    BS EN ISO 4611 : 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
    ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 4892-2:2013 Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps
    UNE-EN 10245-3:2012 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
    BS EN ISO 4892-1:2016 Plastics. Methods of exposure to laboratory light sources General guidance
    ISO 105-B10:2011 Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
    ISO 877-1:2009 Plastics — Methods of exposure to solar radiation — Part 1: General guidance
    ISO 4611:2010 Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
    ISO 877-2:2009 Plastics Methods of exposure to solar radiation Part 2: Direct weathering and exposure behind window glass
    ISO 16871:2003 Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering
    BS EN ISO 7491:2000 (published 2000-12) Dental materials. Determination of colour stability
    ISO 7823-1:2003 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 1: Cast sheets
    BS EN ISO 4892-2:2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013)
    BS EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    BS EN 10245-4 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
    BS EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
    UNE-EN ISO 4892-2:2014 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
    UNE-EN ISO 4892-1:2017 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
    DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
    EN ISO 4892-1 : 2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
    EN ISO 877-2 : 2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS (ISO 877-2:2009)
    EN 16472 : 2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    EN ISO 877 : 1996
    EN ISO 877-1 : 2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE (ISO 877-1:2009)
    EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
    EN ISO 7823-1 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS (ISO 7823-1:2003)
    EN 3-3 : 1994 PORTABLE FIRE EXTINGUISHERS - PART 3: CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS
    EN 1866 : 2005 MOBILE FIRE EXTINGUISHERS
    EN ISO 4892-3:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016)
    EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
    EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
    EN ISO 175:2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    EN ISO 105-B10 : 2011 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
    PREN ISO 4892-2 : DRAFT 2011 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
    I.S. EN 1866:2006 MOBILE FIRE EXTINGUISHERS
    NF EN ISO 877-2 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
    BS EN ISO 105-B10:2011 Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation
    BS EN 16472:2014 Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
    BS 2782-5.540D(1995) : 1995 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
    DIN HDBK 400 : 2ED 2014 BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT
    BS EN ISO 877-3:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION (ISO 877-3:2009)
    08/30180841 DC : DRAFT JUNE 2008 BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
    12/30266179 DC : 0 BS EN 16472 - PLASTICS - METHOD FOR ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
    EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
    I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
    NFT 51 830 : 2002 XP PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - MEDIUM PRESSURE MERCURY VAPOUR LAMP
    I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    ISO/TS 18226:2006 Plastics pipes and fittings Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
    NF EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
    UNI EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFICATION WEATHERING USING CONCENTRATED SOLAR RADIATION
    ISO 15314:2004 Plastics Methods for marine exposure
    17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    17/30360915 DC : 0 BS EN 868-8 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    EN ISO 877-3 : 2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION (ISO 877-3:2009)
    BS EN 868-8:2009 PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
    I.S. CEN/TS 15354:2006 PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION
    DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    ISO 30013:2011 Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
    ISO 29664:2010 Plastics Artificial weathering including acidic deposition
    BS EN ISO 175 : 2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    BS EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
    BS EN ISO 16871 : 2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
    DIN EN 10245-3:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011
    DIN EN ISO 4892-1:2001-09 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
    CEN/TS 15354 : 2006 PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 6603-2:2000 Plastics Determination of puncture impact behaviour of rigid plastics Part 2: Instrumented impact testing
    ISO 11664-3:2012 Colorimetry Part 3: CIE tristimulus values
    ISO 6721-5:1996 Plastics Determination of dynamic mechanical properties Part 5: Flexural vibration Non-resonance method
    ISO 105-A03:1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining
    ISO 6603-1:2000 Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing
    ISO 11664-4:2008 Colorimetry Part 4: CIE 1976 L*a*b* Colour space
    ISO 13468-1:1996 Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument
    ISO 8256:2004 Plastics Determination of tensile-impact strength
    ISO 18314-1:2015 Analytical colorimetry Part 1: Practical colour measurement
    ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
    ISO 11664-1:2007 Colorimetry Part 1: CIE standard colorimetric observers
    ISO 180:2000 Plastics Determination of Izod impact strength
    AS 4285:2019 Rooflights
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
    ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
    ISO 105-A01:2010 Textiles Tests for colour fastness Part A01: General principles of testing
    ISO 2818:1994 Plastics Preparation of test specimens by machining
    ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
    ISO 11664-2:2007 Colorimetry — Part 2: CIE standard illuminants
    ISO 10640:2011 Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
    ISO 6721-1:2011 Plastics Determination of dynamic mechanical properties Part 1: General principles
    ISO 178:2010 Plastics Determination of flexural properties
    ISO 14782:1999 Plastics Determination of haze for transparent materials
    ISO 2813:2014 Paints and varnishes Determination of gloss value at 20, 60 and 85
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective