Skip to content
Please enter a keyword to search

  • ISO 4589-1:2017

    Current The latest, up-to-date edition.

    Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  12-04-2017

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4589-1:2017 specifies the general requirements for the oxygen index (OI) test which are further described in ISO 4589‑2 and ISO 4589‑3 as follows:

    - ISO 4589‑2 describes a method for determining the minimum volume fraction of oxygen in a mixture of oxygen and nitrogen introduced at 23 °C ± 2 °C that will just support combustion of a material under specified test conditions;

    - ISO 4589‑3 describes methods of carrying out the same determination over a range of temperatures typically between 25 °C and 150 °C (although temperatures up to 400 °C can be used).

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO 4589 (04/2001) Supersedes ISO/DIS 4589-1. (04/2017)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    ISO 23559:2007 Plastics Film and sheeting Guidance on the testing of thermoplastic films
    16/30319046 DC : 0 BS EN ISO 4589-3 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST
    06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
    PREN 14313 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 10840:2008 PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS
    05/30136556 DC : 0 PREN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATION - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    DIN EN 14313 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    DIN EN 14304:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    BS EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 15001:2011 (published 2011-11) Anaesthetic and respiratory equipment. Compatibility with oxygen
    DIN EN ISO 12215-2:2002-09 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS
    DIN EN ISO 4589-3:2017-08 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
    EN 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
    ONORM EN ISO 11542-2 : 2009 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    15/30315069 DC : DRAFT MAY 2015 BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    BS ISO 15001 : 2003 AMD 15145 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
    05/30132990 DC : DRAFT APR 2005 ISO 20753 - PLASTICS - TEST SPECIMENS
    BS HD 60269-2:2013 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
    DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    I.S. HD 60269-2:2013 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
    PREN 14304 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    PD IEC/TR 62757:2015 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls
    I.S. EN 14304:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    BS EN 14304 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    DIN EN ISO 4589-3 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
    DIN EN ISO 4589-3:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
    DIN EN ISO 4589-2:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
    PD IEC/TR 60695-1-21:2008 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
    NF EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 15001:2011 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010)
    I.S. EN ISO 4589-2:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
    I.S. EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 11542-2:1998/AC:2008 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
    UNI EN ISO 15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
    BS 88-2(2013) : 2013 COR 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    BS ISO 23559:2011 PLASTICS - FILM AND SHEETING - GUIDANCE ON THE TESTING OF THERMOPLASTIC FILMS
    DIN EN 14304 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    CEI 32-12 : 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
    UNE-EN 14313:2017 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
    DIN EN ISO 4589-2 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
    DIN EN ISO 15001:2012-06 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    BS EN 60695-1-21:2016 (published 2016-11) Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
    BS EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test
    UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    ONORM EN 16028 : 2013 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
    BS ISO 7792-2 : 1997 AMD 15252 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    15/30315090 DC : DRAFT MAY 2015 BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
    05/30136552 DC : 0 PREN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) - SPECIFICATION
    CSA Z15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
    CAN/CSA-Z15001:12 (R2017) Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations)
    ISO 10840:2008 Plastics Guidance for the use of standard fire tests
    ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
    I.S. EN 14313:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    IEC TR 60695-1-21:2008 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
    DIN EN ISO 11542-2:2010-01 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
    UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
    UNE-EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
    IEC 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
    ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
    ISO 4589-3:2017 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
    ISO 11542-2:1998 Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    UNE-EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
    EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
    EN 14304:2015 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
    EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
    EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
    EN ISO 15001:2011 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    EN 14313:2015 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
    I.S. EN 60695-1-21:2016 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
    BS ISO 10931-1:1997 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE)
    DIN EN 14313:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    BS EN 14313 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
    UNE-EN 60695-1-21:2017 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
    UNE-EN ISO 15001:2012 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
    HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 4589-3:2017 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
    ISO 13943:2017 Fire safety Vocabulary
    ISO 7823-1:2003 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 1: Cast sheets
    ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective