• ISO 4628-3:2016

    Current The latest, up-to-date edition.

    Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  12-01-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.

    The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.

    NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.

    NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.

    NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 85011 (rust grades A, B, C, and D).

    ISO 46281 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 35/SC 9
    Development Note Supersedes ISO/DIS 4628-3. (01/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 13523-21 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
    UNI EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    DIN EN 16207:2014-11 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    DIN EN ISO 13076:2012-10 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
    17/30286850 DC : DRAFT SEP 2017 BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION
    BS EN ISO 11997-1 : 2017 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
    UNI EN 16207 : 2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    BS EN 50300 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
    17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    12/30249839 DC : 0 BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
    03/115104 DC : DRAFT OCT 2003 ISO 16151 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, DRY AND WET CONDITIONS
    16/30335981 DC : 0 BS ISO 6270-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 3: CONDENSATION (IN-CABINET EXPOSURE WITH HEATED, BUBBLING WATER RESERVOIR)
    ISO 16151:2005 Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
    BS 3900-F8(1993) : 1993 AMD 9930 METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
    IEC 60950-22 REDLINE : 2ED 2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    09/30194273 DC : 0 BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    ISO 12944-4:2017 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 4: Types of surface and surface preparation
    13/30268239 DC : 0 BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    I.S. EN 39:2001 LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS
    PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
    NBR 15579 : 2008 BUILDINGS SYSTEMS - PIPES AND FITTINGS OF CAST IRON FOR SEWERAGE AND WATER RAIN FOR BUILDINGS - REQUIREMENTS
    BS 3900-F18(1998) : 1998 METHODS OF TEST FOR PAINTS - PART F18: DETERMINATION OF RESISTANCE TO CORROSION UNDER A WET (SALT FOG)/DRY/HUMIDITY CYCLE
    BS 3900-H4(1983) : 1983 METHODS OF TEST FOR PAINTS - EVALUATION OF PAINT AND VARNISH DEFECTS - DESIGNATION OF DEGREE OF CRACKING
    DIN EN ISO 16474-1 E : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
    I.S. EN ISO 11507:2007 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
    PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
    ISO 16311-4:2014 Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention
    I.S. EN 12864:2001 LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
    I.S. EN ISO 11341:2004 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
    15/30328805 DC : 0 BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    BS 3900-F18(2005) : 2005 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
    BS 3900-F19(2000) : 2000 AMD 16874 METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
    17/30350881 DC : DRAFT SEP 2017 BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS
    CAN/CSA-C22.2 NO. 60950-22:17 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
    BS 3900-F14(2004) : 2004 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
    BS 3900-H5(1983) : 1983 METHODS OF TEST FOR PAINTS - EVALUATION OF PAINT AND VARNISH DEFECTS - DESIGNATION OF DEGREE OF FLAKING
    14/30304116 DC : 0 BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS
    15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
    11/30215685 DC : 0 BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
    EEMUA 159 : 2014 ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR
    12/30243830 DC : 0 BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
    12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    11/30229694 DC : 0 BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
    PREN 1487 : DRAFT 2012 BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    BS EN 16129:2013 (published 2013-08) Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    DIN EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    14/30297536 DC : 0 BS EN 16728 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    BS EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
    13/30279620 DC : 0 BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    15/30297966 DC : 0 BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    I.S. EN ISO 12944-5:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018)
    13/30284283 DC : 0 BS ISO/IEC 62752 - IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    BS EN ISO 15110:2017 Paints and varnishes. Artificial weathering including acidic deposition
    11/30231401 DC : 0 BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION
    BS EN 16582-1:2015 (published 2015-08) Domestic swimming pools General requirements including safety and test methods
    VDI 2083 Blatt 18:2012-01 Cleanroom technology - Biocontamination control
    DIN EN 16582-1 E : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    NBR 15485 : 2007 FURNITURE - WIRE ACCESSORIES - REQUIREMENTS AND TEST METHODS
    14/30309761 DC : 0 BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
    BS ISO 27667 : 2011 ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES
    BS 3900-F16(1997) : 1997 AMD 13289 METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER)
    DIN EN ISO 9227 E : 2017 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017)
    NFP 90 303 : 2002 AMD 1 2003 SMALL SWIMMING POOLS - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
    BS 7079-A2(1996) : 1996 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS
    10/30205803 DC : 0 BS EN ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT
    BS EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION
    DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    ONORM EN ISO 16151 : 2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
    NBR 7348 : 2017 INDUSTRIAL PAINTING - STEEL SURFACE PREPARATION BY ABRASIVE BLASTING OR WATER JETTING
    EN 16582-1 : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    04/30125747 DC : DRAFT NOV 2004 IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    BS EN 16207:2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    VDI 2083 Blatt 9.2:2017-01 CLEANROOM TECHNOLOGY - CONSUMABLES IN THE CLEANROOM
    BS ISO 11243 : 1994 CYCLES - LUGGAGE CARRIERS FOR BICYCLES - CONCEPTS, CLASSIFICATION AND TESTING
    UNE-EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
    BS EN 16927:2017 (published 2017-02) Mini-pools. Specific requirements including safety and test methods for mini-pools
    12/30237859 DC : 0 BS ISO 16539 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS -"DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY
    PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
    17/30346602 DC : 0 BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
    16/30327434 DC : 0 BS EN ISO 12944-1 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTE CTIVE COATING SYSTEMS - PART 1: GENERAL INTRODUCTION
    16/30337296 DC : 0 BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION
    16/30234880 DC : 0 BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS
    BS 3900-H8(2005) : 2005 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE
    BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
    BS 3900-F16(2007) : 2007 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
    PREN ISO 16701 : DRAFT 2011 CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011)
    10/30210875 DC : 0 BS EN ISO 13076 - PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS
    12/30268970 DC : 0 BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
    BS 3900-F9(2001) : 2001 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONTINUOUS CONDENSATION
    08/30194268 DC : 0 BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    NBR 6751 : 2009 WHEELS AND RIMS FOR TRUCKS, BUSSES AND SIMILAR - DURABILITY AND ENDURANCE CHECK
    DD ISO/TR 15235 : 2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - COLLECTED INFORMATION ON THE EFFECT OF LEVELS OF WATER-SOLUBLE SALT CONTAMINATION
    BS 7079-D1(1993) : 1993 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR SURFACE PREPARATION - GENERAL PRINCIPLES
    06/30079861 DC : DRAFT JULY 2006 ISO 15484 - ROAD VEHICLES - BRAKE LININGS FRICTION MATERIALS - PRODUCT DEFINITION AND QUALITY ASSURANCE
    NBR 13919 : 1997 FURNITURE - CHILDREN'S HIGH CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS
    95/101288 DC : DRAFT FEB 1995 PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    XP P90 313 : 2004 XP SMALL SWIMMING POOLS - SAFETY REQUIREMENTS AND TEST METHODS
    UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    AEP-60 : 2009 PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS
    EN ISO 12944-5:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018)
    08/30171576 DC : DRAFT APR 2008 BS ISO 27667 - ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES
    BS 3900-F12(1997) : 1997 AMD 13288 METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
    EN 14344:2004 Child use and care articles - Child seats for cycles - Safety requirements and test methods
    BS 3900-F14(1995) : 1995 AMD 9931 METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION
    I.S. EN ISO 12944-6:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018)
    BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
    BS 7079-D1(2000) : 2000 AMD 13360 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D1: GENERAL PRINCIPLES
    NF EN 50300 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
    UL 60950-22 : 2 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
    BS ISO 16151 : 2005 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
    14/30310464 DC : 0 BS EN 61643-31 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 31: REQUIREMENTS AND TEST METHODS FOR SPDS FOR PHOTOVOLTAIC INSTALLATIONS
    BS EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    BS 3900-H2(1983) : 1983 METHODS OF TEST FOR PAINTS - EVALUATION OF PAINT AND VARNISH DEFECTS - DESIGNATION OF DEGREE OF BLISTERING
    BS 3900-F19(2006) : 2006 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
    16/30337293 DC : 0 BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
    ISO 12944-9:2018 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
    02/123754 DC : DRAFT OCT 2002 ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: EVALUATION OF CORROSION AROUND A SCRIBE
    BS ISO 11997-1 : 2005 AMD 16875 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
    16/30340557 DC : 0 BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
    BS 460(2002) : 2002 CAST IRON RAINWATER GOODS - SPECIFICATION
    BS 7079-D2(1993) : 1993 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR SURFACE PREPARATION - ABRASIVE BLAST CLEANING
    BS 3900-H1(1983) : 1983 METHODS OF TEST FOR PAINTS - EVALUATION OF PAINT AND VARNISH DEFECTS - DESIGNATION OF INTENSITY, QUANTITY AND SIZE OF COMMON TYPES OF DEFECT: GENERAL PRINCIPALS AND RATING SCHEMES
    BS 7079-D2(2000) : 2000 AMD 13361 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D2: ABRASIVE BLAST CLEANING
    BS EN 60950-22:2017 (published 2017-08) Information technology equipment. Safety Equipment to be installed outdoors
    UNI EN ISO 13076 : 2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS
    EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    DIN EN 16927 E : 2017 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    NBR IEC 62208 : 2013 EMPTY ENCLOSURE FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    BS EN ISO 13076:2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS
    BS EN ISO 16151:2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, ''DRY'' AND ''WET'' CONDITIONS
    NBR 15820 : 2010 BOX FOR ELECTRIC POWER METER - REQUIREMENTS
    16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
    ISO 27667:2011 Road vehicles Brake lining friction materials Evaluation of corrosion effects on painted backing plates and brake shoes
    AEP-61 : 2009 PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS
    DIN EN 16582-1:2015-11 Domestic swimming pools - Part 1: General requirements including safety and test methods
    ONORM EN 16582-1 : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    I.S. EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017)
    UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    DIN EN 16728:2016-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    I.S. EN 16207:2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    BIS IS 13252-22 : 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    I.S. EN 16927:2017 MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
    I.S. EN 13523-27:2017 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
    UNE-EN ISO 11130:2011 Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010)
    I.S. EN ISO 11997-1:2017 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
    I.S. EN 16728:2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    I.S. EN 60950-22:2017 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    I.S. EN ISO 16474-1:2013 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
    ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination
    I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    BS EN 16728 : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    PREN 1825-1 : DRAFT 1995 INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    NF EN ISO 11130 : 2010 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
    I.S. EN 16129:2013 PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    I.S. EN ISO 12944-1:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017)
    DIN EN ISO 11130:2010-12 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
    I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    DIN EN 16728 E : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    NBR 16067-1 : 2012 FURNITURE - CRIBS AND CRADLES FOR DOMESTIC USE UNTIL 900 MM - PART 1: SAFETY REQUIREMENTS
    ISO 16539:2013 Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
    UNI EN ISO 11130 : 2010 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
    I.S. EN ISO 16961:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015)
    ISO 16474-1:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 1: General guidance
    BS IEC 61892-1:2015 Mobile and fixed offshore units. Electrical installations General requirements and conditions
    ISO 12944-6:2018 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods
    AEP-63 : 2009 PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
    ISO 12944-5:2018 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
    ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
    UNE-EN ISO 16474-1:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)
    EN ISO 11997-1:2017 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
    UNI EN ISO 16474-1 : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
    DD ENV 14236 : 2002 ULTRASONIC DOMESTIC GAS METERS
    EN ISO 16151 : 2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, ''DRY'' AND ''WET'' CONDITIONS
    BS EN ISO 16474-1 : 2013 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
    ISO 12944-8:2017 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 8: Development of specifications for new work and maintenance
    17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
    BS EN ISO 12944-6:2018 (published 2018-03) Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods
    UNE-EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
    BS EN ISO 12944-8:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017)
    DIN EN 14236 E : 2008 ULTRASONIC DOMESTIC GAS METERS
    I.S. EN ISO 12944-9:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
    BS EN ISO 12944-1:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION
    UNE-EN ISO 15110:2018 Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
    EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017)
    BS EN 13523-27:2017 Coil coated metals. Test methods Resistance to humid poultice (Cataplasm test)
    PREN 13523-27 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
    UNE-EN 16728:2016 LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
    NFP 90 302 : 2002 AMD 1 2003 KIT SWIMMING - SAFETY REQUIREMENTS AND TEST METHODS
    CSA C22.2 No. 61980-1 : 2016 ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    PREN 1359 : DRAFT 2014 GAS METERS - DIAPHRAGM GAS METERS
    DIN EN ISO 12944-6:1998-07 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS
    ISO 15110:2017 Paints and varnishes — Artificial weathering including acidic deposition
    DIN EN 16927 : 2015 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    EN ISO 12944-8:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017)
    I.S. EN ISO 8504-2:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 2: ABRASIVE BLAST-CLEANING
    BS 2015(1992) : 1992 GLOSSARY OF PAINT AND RELATED TERMS
    ISO 12944-1:2017 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 1: General introduction
    15/30284318 DC : 0 BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
    UNI EN ISO 16151 : 2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
    07/30163686 DC : 0 BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - PERIODIC INSPECTION OF TRANSPORTABLE REFILLABLE LPG CYLINDERS
    NBR 15141 : 2008 OFFICE FURNITURES - MODULAR PARTITION - CEILING FLOOR TYPE
    15/30329698 DC : 0 BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
    I.S. EN ISO 15110:2017 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    DIN EN ISO 16474-1:2014-03 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
    I.S. EN 16582-1:2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    I.S. EN ISO 13076:2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
    DIN EN ISO 16151:2008-07 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS
    BS ISO 16539 : 2013 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS - "DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY
    EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
    EN ISO 15110:2017 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
    UNE-EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
    EN ISO 12944-1:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017)
    EN ISO 12944-6:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018)
    EN 14236 : 2007 ULTRASONIC DOMESTIC GAS METERS
    EN ISO 12944-9 : 2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
    I.S. EN ISO 12944-8:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017)
    I.S. EN ISO 8504-1:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 1: GENERAL PRINCIPLES
    I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
    BS EN ISO 8504-1:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 1: GENERAL PRINCIPLES
    I.S. EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
    BS EN ISO 8504-2:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 2: ABRASIVE BLAST CLEANING
    I.S. CEN TR 581-4:2006 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
    IEC 61892-1:2015 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
    I.S. EN 50300:2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
    I.S. EN ISO 16151:2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, ''DRY'' AND ''WET'' CONDITIONS
    EN ISO 9227:2017 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017)
    VDI 2083-17 : 2013 CLEANROOM TECHNOLOGY - COMPATIBILITY OF MATERIALS WITH THE REQUIRED CLEANLINESS
    ISO 11997-1:2017 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
    DIN EN 877:2010-01 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
    IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements
    EN 60950-22 : 2017 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS (IEC 60950-22:2016)
    ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
    ONORM EN 16207 : 2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    DIN EN 13523-25:2014-08 Coil coated metals - Test methods - Part 25: Resistance to humidity
    DIN EN 1487:2014-09 BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    DIN EN ISO 11997-2:2013-12 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
    DIN EN ISO 4628-8:2013-03 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012)
    DIN EN 1359:2007-06 GAS METERS - DIAPHRAGM GAS METERS
    DIN EN 12864:2006-03 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
    DIN EN 1670:2007-06 Building hardware - Corrosion resistance - Requirements and test methods
    DIN EN ISO 11341:2004-12 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
    DIN EN ISO 11507:2007-05 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
    DIN EN 14344 E : 2004
    DIN EN ISO 2810:2004-10 PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT
    DIN EN 15081 E : 2008 INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT
    DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
    BS EN ISO 21227-1:2003 Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging General guidance
    BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    IEC 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog)
    ISO 9227:2017 Corrosion tests in artificial atmospheres Salt spray tests
    BS EN 1825-1 : 2004 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    ISO 3231:1993 Paints and varnishes Determination of resistance to humid atmospheres containing sulfur dioxide
    ISO 13076:2012 Paints and varnishes Lighting and procedure for visual assessments of coatings
    BS EN ISO 11341 : 2004 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
    BS EN ISO 2810:2004 PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT
    UNE-EN ISO 4628-8:2013 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
    IEC 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks
    ISO 11341:2004 Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation
    04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    ISO 2810:2004 Paints and varnishes Natural weathering of coatings Exposure and assessment
    BS EN 14389-1:2015 (published 2015-05) Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
    ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
    UNE-EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
    BS EN ISO 11997-2 : 2013 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
    BS EN 39 : 2001 LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS
    ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
    BS EN ISO 8501-2 : 2001 AMD 13359 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS
    BS EN 1337-9 : 1998 STRUCTURAL BEARINGS - PROTECTION
    BS EN 1359:2017 (published 2017-08) Gas meters. Diaphragm gas meters
    BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
    BS EN 858-1 : 2002 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
    BS EN 15081 : 2007 INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT
    14/30293263 DC : 0 BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
    ISO 16961:2015 Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks
    BS EN ISO 7253 : 2001 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    EN 62752:2016 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) (IEC 62752:2016)
    BS EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
    BS EN 14389-2:2015 (published 2015-05) Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
    BS EN 1487 : 2014 BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
    UNE-EN 50539-11:2013 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications
    BS EN ISO 11507 : 2007 PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
    BS EN 13523-25:2014 (published 2014-06) Coil coated metals. Test methods Resistance to humidity
    09/30204029 DC : 0 BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    ISO 11997-2:2013 Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 2: Wet (salt fog)/dry/humidity/UV light
    BS EN ISO 4628-8 : 2012 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT
    BS EN ISO 8501-4:2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - INITIAL SURFACE CONDITIONS, PREPARATION GRADES AND FLASH RUST GRADES IN CONNECTION WITH HIGH-PRESSURE WATER JETTING
    IEC 60950-22:2016 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
    BS EN 12864 : 2001 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
    ISO 21227-1:2003 Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance
    BS EN 13523-21:2017 (published 2017-08) Coil coated metals. Test methods Evaluation of outdoor exposed panels
    UNE-EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
    BS EN ISO 9227:2017 Corrosion tests in artificial atmospheres. Salt spray tests
    BS EN 1670:2007 Building hardware. Corrosion resistance. Requirements and test methods
    IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    15/30269927 DC : 0 BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS
    BS EN 14344:2004 Child use and care articles. Child seats for cycles. Safety requirements and test methods
    ISO 11507:2007 Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
    16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    IEC 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    DIN EN ISO 7253:2002-04 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
    EN ISO 8501-4 : 2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 4: INITIAL SURFACE CONDITIONS, PREPARATION GRADES AND FLASH RUST GRADES IN CONNECTION WITH HIGH-PRESSURE WATER JETTING
    UNE-EN 16207:2015 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
    I.S. EN ISO 2810:2004 PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT
    UNE-EN ISO 13076:2013 Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
    I.S. EN ISO 8501-4:2007 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 4: INITIAL SURFACE CONDITIONS, PREPARATION GRADES AND FLASH RUST GRADES IN CONNECTION WITH HIGH-PRESSURE WATER JETTING
    I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
    DIN EN 12864 E : 2006 AMD 3 2010 LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
    DIN EN 1487:2000-06 BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    I.S. EN 13523-25:2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
    I.S. EN 13523-21:2017 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
    DIN EN ISO 11341:1998-02 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
    I.S. EN ISO 11997-2:2013 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
    I.S. EN 1359:2017 GAS METERS - DIAPHRAGM GAS METERS
    DIN EN 14344:2004-11 Child use and care articles - Child seats for cycles - Safety requirements and test methods
    I.S. EN ISO 9227:2017 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017)
    I.S. EN 1670:2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    DIN EN 858-1:2002-05 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
    I.S. EN 1487:2014 BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
    I.S. EN ISO 4628-8:2012 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012)
    I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
    I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
    CEN/TR 581-4:2005 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
    EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    OVE/ONORM EN 61439-1 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    EN 12864:2001/A3:2009 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
    EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN ISO 8501-2 : 2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 2: PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS (ISO 8501-2:1994)
    BS 460(2002) : 2002 CAST IRON RAINWATER GOODS - SPECIFICATION
    EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
    EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    DIN EN ISO 9227:2017-07 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017)
    EN 13523-25:2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
    DIN EN 15081:2008-03 Industrial valves - Mounting kits for part-turn valve actuator attachment
    DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
    IEC 60950-22:2016 RLV Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
    EN 1337-9 : 1997 STRUCTURAL BEARINGS - PROTECTION
    EN 50300 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
    DIN EN 13523-27:2009-10 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
    EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    EN ISO 8504-2 : 2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 2: ABRASIVE BLAST CLEANING
    EN 16207 : 2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
    EN ISO 13076 : 2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
    EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL