Skip to content
Please enter a keyword to search

  • ISO 4671:2007

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  21-03-2022

    Language(s): 

    Published date:  11-12-2007

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 4671:2007 specifies methods of measuring the inside diameter, outside diameter (including diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover thickness of hoses, methods of measurement and identification of the lengths of hoses and hose assemblies, and a method of verifying the through-bore of hydraulic hose assemblies.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 4671. (12/2007)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems
    BS ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels
    ANSI B93.100M : 1987 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - METHODS OF TEST
    ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    BS ISO 6805:1994 Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification
    12/30264538 DC : 0 BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    ISO 16438:2012 Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods
    I.S. EN 13765:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    BS ISO 3861 : 1995 AMD 9705 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    11/30238916 DC : 0 BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
    BS ISO 19385:2017+A1:2019 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification
    07/30162629 DC : 0 BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
    08/30165015 DC : DRAFT FEB 2008 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
    09/30194969 DC : 0 BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    BS ISO 28017:2009 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
    BS ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a
    03/311277 DC : DRAFT JAN 2004 ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS
    07/30150928 DC : 0 BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    15/30317657 DC : 0 BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification
    BS ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels
    BS EN ISO 18752:2016 Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
    DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    05/30129301 DC : DRAFT FEB 2005 ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    11/30235144 DC : 0 BS ISO 16438 - AGRICULTURAL IRRIGATION EQUIPMENT - THERMOPLASTIC COLLAPSIBLE HOSES FOR IRRIGATION - SPECIFICATIONS AND TEST METHODS
    DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    99/104927 DC : DRAFT JUN 1999 PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS
    PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    07/30175126 DC : DRAFT DEC 2007 BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    ISO 3949:2009 Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification
    BS EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
    BS ISO 18752 : 2014 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification
    09/30195768 DC : 0 BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    DIN EN ISO 3949 E : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009)
    I.S. EN ISO 10619-1:2018 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2017)
    ISO 3862:2017 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification
    I.S. EN 15889:2011 FIRE-FIGHTING HOSES - TEST METHODS
    DIN EN ISO 10619-1:2012-03 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011)
    BS ISO 23297:2017 Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
    ISO 17165-1:2007 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
    ISO 11237-2:2006 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications
    EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
    ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels
    BIS IS 16209 : 2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM
    NF EN ISO 1402 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
    I.S. EN ISO 3821:2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    UNE-EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
    ISO 4079-2:2005 Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    UNE-EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
    I.S. EN ISO 1403:2008 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    DIN EN 1947:2014-09 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    BS EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
    BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
    BS EN 559:2003 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    BS EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam. Specification
    UNE-EN ISO 6224:2012 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    UNE-EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    BS EN ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications
    BS EN 857:2015 Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
    BS EN ISO 5774:2016 Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
    BS EN 14540:2014 Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
    ISO 10619-3:2011 Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures
    I.S. EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    DIN EN ISO 8308:2016-02 RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015)
    DIN EN 15889:2011-09 Fire-fighting hoses - Test methods
    EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    DIN EN 16436-1:2016-04 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    07/30162632 DC : 0 BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES
    15/30317639 DC : 0 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
    UNE-EN 16643:2017 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
    ISO 1436-1:2001 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    07/30170472 DC : DRAFT AUG 2007 BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    ONORM EN ISO 1403 : 2010 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    03/311096 DC : DRAFT DEC 2003 ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS
    12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    PD ISO/TR 17784:2003 Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
    BS ISO 3862:2009 Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification
    BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems
    BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    06/30146125 DC : 0 EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    16/30335320 DC : 0 BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
    NF EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    14/30266729 DC : 0 BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION
    BS ISO 2398 : 1995 AMD 9704 RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    15/30317678 DC : 0 BS EN ISO 7233 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION,STORAGE,USE AND MAINTENANCE
    16/30335329 DC : 0 BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels
    DIN EN ISO 1403:2010-04 RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    07/30169625 DC : 0 BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    03/311275 DC : DRAFT DEC 2003 ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS
    15/30293925 DC : 0 BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION
    BS ISO 4079:2017 Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
    I.S. EN 13766:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    ISO 4079:2017 Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification
    I.S. EN ISO 10619-3:2011 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES (ISO 10619-3:2011)
    I.S. EN 16436-1:2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification
    EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
    EN 16436-1:2014+A1:2015 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
    ISO 4079-1:2001 Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    I.S. EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    DIN EN ISO 7233:2015-10 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016)
    DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
    DIN EN ISO 1402:2010-04 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
    DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    DIN EN 14540:2014-09 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
    BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    BS EN ISO 3861:2008 Rubber hoses for sand and grit blasting. Specification
    UNE-EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    I.S. EN ISO 6224:2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
    I.S. EN 14540:2014 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    I.S. EN ISO 3861:2008 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    I.S. EN ISO 1401:2016 RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016)
    I.S. EN 1947:2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
    I.S. EN ISO 5774:2016 PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016)
    I.S. EN ISO 2398:2016 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
    EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    I.S. EN ISO 6807:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
    I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN ISO 2398:2010-04 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
    DIN EN ISO 3821:2010-07 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    I.S. EN ISO 6134:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
    I.S. EN 694:2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    I.S. EN ISO 8308:2015 RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015)
    I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    DIN EN 1947:2002-11 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    I.S. EN ISO 5771:2008 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    I.S. EN ISO 7233:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016)
    I.S. EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
    I.S. EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    I.S. EN ISO 1402:2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
    I.S. EN ISO 6806:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
    UNI EN 694 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    ONORM EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    BS 4749:1991 Specification for textile reinforced rubber hydraulic hoses and hose assemblies
    BS 4586:1992 Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies
    BS 3832:1991 Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations
    UNI EN ISO 3861 : 2009 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    UNE-EN ISO 28017:2012 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011)
    ONORM EN ISO 3861 : 2010 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    PREN 13766 : DRAFT 2016 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
    DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    15/30317645 DC : 0 BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION
    BS ISO 6605:2017 Hydraulic fluid power. Test methods for hoses and hose assemblies
    08/30187544 DC : DRAFT OCT 2008 BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    05/30128222 DC : DRAFT JAN 2005 ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
    15/30317651 DC : 0 BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
    BS EN ISO 3949:2014 Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
    UNI ISO 17165-1 : 2012 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
    03/311322 DC : DRAFT JAN 2004 ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS
    14/30293931 DC : 0 BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS
    BS ISO 16438:2012 Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
    EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
    UNE-EN 15889:2013 Fire-fighting hoses - Test methods
    BS ISO 1436-2:2005 Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications
    ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification
    16/30326500 DC : DRAFT JAN 2016 BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS
    16/30334966 DC : 0 BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    BS ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels
    UNI EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    07/30175122 DC : DRAFT DEC 2007 BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    BIS IS 12656 : 2014 RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS
    UNE-EN ISO 4641:2017 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
    BS EN 15889:2011 Fire-fighting hoses. Test methods
    DIN EN 16436-1 E : 2016 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    BS ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles
    06/30127099 DC : DRAFT JUNE 2006 ISO 17165-1 - HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
    DIN EN 13766:2010-11 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
    I.S. EN ISO 28017:2018 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018)
    ISO 4639-1:1987 Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels
    ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications Specification
    EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    I.S. EN 16643:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION
    ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a
    EN ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
    ONORM EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification
    UNI EN ISO 3949 : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
    ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems Specification
    ISO 10619-1:2017 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
    I.S. EN ISO 4641:2016 RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
    DIN EN ISO 6807:2004-08 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003)
    DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    DIN EN ISO 3861:2010-04 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    DIN EN 694:2014-10 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
    DIN EN ISO 7233:2017-03 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
    BS EN 1763-1:2001 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses
    BS EN 853:2015 Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
    ISO 1401:2016 Rubber hoses for agricultural spraying
    UNE-EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
    BS EN 694:2014 Fire-fighting hoses. Semi-rigid hoses for fixed systems
    UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    ONORM EN 13766 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
    UNI EN ISO 5771 : 2009 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    UNI EN ISO 1403 : 2009 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    UNI EN ISO 6224 : 2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
    UNI EN 1947 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNI EN 14540 : 2014 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS
    UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    NF EN ISO 10619-3 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES
    BS ISO 16301:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification
    BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
    BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies Dimensions and requirements
    BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness Bending tests at high and low temperatures
    10/30212877 DC : DRAFT JUNE 2010 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
    I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    I.S. EN ISO 1746:2000 RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS
    ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
    08/30188437 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    12/30238564 DC : 0 BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION
    07/30175157 DC : DRAFT DEC 2007 BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION
    ISO 19385:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification
    SAE J 517 : 2017 HYDRAULIC HOSE
    11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    16/30311803 DC : 0 BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION
    EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
    12/30264535 DC : 0 BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    UNE-EN ISO 18752:2017 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014)
    16/30302789 DC : DRAFT APR 2016 BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION
    BS ISO 4079-2:2005 Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications
    08/30190043 DC : DRAFT SEP 2008 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
    UNE-EN 13765:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
    08/30183539 DC : DRAFT JUNE 2008 BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    16/30335326 DC : 0 BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION
    09/30200633 DC : 0 BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
    13/30284248 DC : 0 BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION
    16/30317675 DC : 0 BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    BS EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge. Specification
    04/30110371 DC : 0 ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
    ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels
    ISO 16301:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification
    UNI EN ISO 10619-3 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES
    UNI EN 15889 : 2011 FIRE-FIGHTING HOSES - TEST METHODS
    03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
    16/30330752 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    BS ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels
    I.S. EN ISO 18752:2016 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014)
    UNI EN ISO 10619-1 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE
    ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
    ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
    BS ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
    UNE-EN 13766:2011 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    DIN EN ISO 3949:2016-08 (Draft) PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009)
    ONORM EN ISO 3949 : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009)
    PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    ISO 3862-2:2005 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    DIN EN 13765:2015-05 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    ISO 6805:1994 Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification
    ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels
    PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    ISO 1436:2017 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification
    EN ISO 3949:2014 PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009)
    I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
    ISO 23297:2017 Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
    ISO 17324:2014 Rubber hoses for automotive turbochargers — Specification
    I.S. EN ISO 1825:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017)
    BS EN 13765 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    DIN EN ISO 6806:2015-08 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
    DIN EN ISO 5771:2009-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
    BS EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air. Specification
    BS EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies. Hydrostatic testing
    UNE-EN ISO 7233:2017 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
    UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge — Specification
    ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
    UNE-EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
    BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
    ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air Specification
    ISO 3862-1:2001 Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications
    UNE-EN ISO 1401:2017 Rubber hoses for agricultural spraying (ISO 1401:2016)
    UNE-EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
    BS EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
    UNE-EN ISO 3821:2011 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
    BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
    BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNE-EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
    BS EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
    BS EN ISO 1746:2001 Rubber or plastics hoses and tubing. Bending tests
    BS EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners. Specification
    UNE-EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    ISO 7233:2016 Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum
    UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    BS EN ISO 8308:2015 Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
    ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
    BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification
    ISO 8308:2015 Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls
    UNE-EN 694:2015 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    BS EN 1947:2014 Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN 1947:2015 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    UNE-EN 14540:2015 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
    ISO 1402:2009 Rubber and plastics hoses and hose assemblies Hydrostatic testing
    BS EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
    UNE-EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    BS EN ISO 1401:2016 Rubber hoses for agricultural spraying
    ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification
    UNE-EN ISO 8308:2017 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015)
    UNE-EN ISO 2398:2017 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
    EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    EN ISO 18752:2016 Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014)
    EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
    EN 1327:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
    EN 14540:2014 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
    EN ISO 6807 : 2003 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
    EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
    EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
    EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    EN 16643:2016 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
    EN 559 : 2003 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
    EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005)
    EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    EN 1947:2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
    EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
    EN ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015)
    EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008)
    EN 15889:2011 Fire-fighting hoses - Test methods
    EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
    EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016)
    EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    EN 694:2014 Fire-fighting hoses - Semi-rigid hoses for fixed systems
    EN 1763-1 : 2000 RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES
    EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
    EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
    BS ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems. Specification
    ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel
    BS ISO 17324:2014 Rubber hoses for automotive turbochargers. Specification
    12/30261644 DC : 0 BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE
    08/30183047 DC : DRAFT MAY 2008 BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    BS ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
    BS 5173-101.2:1987 Methods of test for rubber and plastics hoses and hose assemblies. Determination of dimensions Measurement of length of hoses and hose assemblies
    DIN EN ISO 4641:2016-07 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
    ONORM EN 12115 : OCT 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    BS ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
    13/30275849 DC : 0 BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification
    DIN EN ISO 28017:2015-12 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015)
    11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    15/30317636 DC : 0 BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING
    DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
    DIN EN 15889 E : 2011 FIRE-FIGHTING HOSES - TEST METHODS
    15/30317648 DC : 0 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
    15/30317663 DC : 0 BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION
    ISO 11237:2017 Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
    BS ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification
    16/30312462 DC : 0 BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES
    BS ISO 11237-1:2005 Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications
    BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
    BS ISO 11237-2:2006 Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications
    BS 5173-102.1(1985) : LATEST METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC PRESSURE TESTS - HYDROSTATIC TESTS
    BS ISO 1403 : 1995 AMD 9703 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS
    I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    UNI EN ISO 1402 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
    BS ISO 1436:2017 Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
    UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    I.S. EN ISO 3949:2014 PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009)
    ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
    ISO 11237-1:2004 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications
    BS EN 16436-1 : 2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
    UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
    ISO 1436-2:2005 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications
    UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    ISO 18752:2014 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification
    BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
    UNE-EN ISO 1402:2010 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
    BS EN 854:2015 Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
    ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
    BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
    UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    DIN EN ISO 6224:2012-02 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
    EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

    Standards Referencing This Book - (Show below) - (Hide below)

    AS/NZS 1335:2020 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
    ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
    ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm
    ISO 3611:2010 Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
    ISO 463:2006 Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective