ISO 4787:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Laboratory glassware Volumetric instruments Methods for testing of capacity and for use
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
22-11-2021
Superseded by
Language(s)
French, English
Published date
01-04-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 4787:2010 provides methods for the testing, calibration and use of volumetric instruments made from glass in order to obtain the best accuracy in use.
The International Standards for the individual volumetric instruments (ISO 385, ISO 646, ISO 835, ISO 1042 and ISO 4788) include clauses on the definition of capacity; these clauses describe the method of manipulation in sufficient detail to define the capacity without ambiguity. ISO 4787:2010 contains supplementary information.
The procedures in ISO 4787:2010 are applicable to volumetric instruments with nominal capacities in the range of 0,1 ml to 10 000 ml. These include: single-volume pipettes (see ISO 648) without subdivisions; graduated measuring pipettes and dilution pipettes, with partial or complete subdivisions (see ISO 835); burettes (see ISO 385); volumetric flasks (see ISO 1042); and graduated measuring cylinders (see ISO 4788). The procedures are not recommended for testing of volumetric instruments with capacities below 0,1 ml such as micro-glassware.
ISO 4787:2010 does not deal specifically with pyknometers as specified in ISO 3507. However, the procedures specified for the determination of volume of glassware can, for the most part, also be followed for the calibration of pyknometers.
| DevelopmentNote |
Supersedes ISO/DIS 4787. (04/2010)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 4787 : 2011 | Identical |
| NS EN ISO 4787 : 2011 | Identical |
| BS EN ISO 4787:2011 | Identical |
| UNI EN ISO 4787 : 2011 | Identical |
| PN EN ISO 4787 : 2011 | Identical |
| I.S. EN ISO 4787:2011 | Identical |
| UNE-EN ISO 4787:2011 | Identical |
| DIN EN ISO 4787:2011-05 | Identical |
| EN ISO 4787:2011 | Identical |
| SN EN ISO 4787:2011 | Identical |
| NF EN ISO 4787 : 2011 | Identical |
| BIS IS/ISO 4787 : 2010 | Identical |
| NBN EN ISO 4787 : 2011 | Identical |
| NEN EN ISO 4787 : 2011 | Identical |
| UNE 400301:1996 | Identical |
| UNE-EN ISO 4787:2010 | Identical |
| PN 92/B-13018 : 1992 | Identical |
| BS EN ISO 4787:2010 | Identical |
| NFB 35 309 : 1983 | Similar to |
| BS EN ISO 384:2015 | Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments |
| UNE-EN ISO 384:2016 | Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015) |
| 06/30155664 DC : DRAFT SEP 2006 | ISO 22960 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - MOLECULAR ABSORPTION SPECTROMETRY USING 1,10-PHENANTHROLINE |
| BS EN ISO 16373-3:2014 | Textiles. Dyestuffs Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
| BS ISO 10469:2006 | Copper sulfide concentrates. Determination of copper. Electrogravimetric method |
| 05/30116635 DC : DRAFT APR 2005 | BS ISO 12739 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - IONEXCHANGE/EDTA TITRIMETRIC METHOD |
| ISO 5931:2000 | Carbonaceous materials used in the production of aluminium — Calcined coke and calcined carbon products — Determination of total sulfur by the Eschka method |
| 13/30283709 DC : 0 | BS EN ISO 384 - LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS |
| PREN 17132 : DRAFT 2018 | TEXTILES AND TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCT MATERIALS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH), METHOD USING CHROMATOGRAPHIC TECHNIQUES |
| 04/30116289 DC : DRAFT JUL 2004 | ISO 10378 - COPPER, LEAD AND ZINC SULFIDE CONCENTRATES - DETERMINATION OF GOLD AND SILVER CONTENTS - FIRE ASSAY GRAVIMETRIC AND FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 06/30155673 DC : DRAFT SEP 2006 | ISO 22962 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY |
| PD CEN ISO/TS 16186:2012 | Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials |
| 03/113238 DC : DRAFT SEP 2003 | BS ISO 15028 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF HYDROLYSABLE CHLORINE |
| 07/30150368 DC : 0 | ISO 16918-1 - IRON AND STEEL - DETERMINATION OF NINE ELEMENTS BY THE INDUCTIVELY COUPLED PLASMA ATOMIC MASS SPECTROSCOPIC METHOD - PART 1: DETERMINATION OF TIN, ANTIMONY, CERIUM, LEAD AND BISMUTH |
| ISO 13658:2000 | Zinc sulfide concentrates Determination of zinc content Hydroxide precipitation and EDTA titrimetric method |
| I.S. EN ISO 384:2015 | LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS (ISO 384:2015) |
| ISO 17617:2014 | Textiles Determination of moisture drying rate |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 5165:2017 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| BS EN ISO 5164:2014 | Petroleum products. Determination of knock characteristics of motor fuels. Research method |
| BS EN ISO 4788:2005 | Laboratory glassware. Graduated measuring cylinders |
| BS EN ISO 14896:2009 | Plastics. Polyurethane raw materials. Determination of isocyanate content |
| BS EN 14362-2:2003 | Textiles. Methods for the determination of certain aromatic amines deriv ed from azo colorants Detection of the use of certain azo colorants accessible by extracting t he fibres |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| DIN EN ISO 5164:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| DIN EN ISO 14896:2009-07 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
| ISO 10258:2018 | Copper sulfide concentrates — Determination of copper content — Titrimetric methods |
| PD CEN ISO/TS 16189:2013 | Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials |
| ISO 13545:2000 | Lead sulfide contentrates Determination of lead content EDTA titration method after acid digestion |
| 06/30155669 DC : DRAFT SEP 2006 | ISO 22961 - TITANIUM AND TITANIUM ALLOYS - DETERMINATION OF IRON - ATOMIC ABSORPTION SPECTROMETRY |
| 13/30250163 DC : 0 | BS ISO 17299-1 - TEXTILES - DETERMINATION OF DEODORANT PROPERTY - PART 1: GENERAL PRINCIPLE |
| 12/30261556 DC : 0 | BS ISO 5163 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| BS ISO 17299-1:2014 | Textiles. Determination of deodorant property General principle |
| 02/120873 DC : DRAFT FEB 2002 | BS EN 14362-2 -TEXTILES - METHODS FOR DETECTION AND DETERMINATION OF CERTAIN LISTED AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: EXTRACTION TEST ON COLOURED TEXTILES - DETECTION OF THE USE OF CERTAIN AZO COLORANTS IN FIBRES WITH EXTRACTABLE DYES |
| BS ISO 15247:2015 | Zinc sulfide concentrates. Determination of silver content. Acid dissolution and flame atomic absorption spectrometric method |
| S.R. CWA 17253-1:2018 | JOINT IMPLANTS - PART 1: NOVEL METHODS FOR ISOLATING WEAR PARTICLES FROM JOINT REPLACEMENTS AND RELATED DEVICES |
| UNE 38861:2012 | Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1,10-phenanthroline. |
| DIN EN ISO 384:2016-05 | LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS (ISO 384:2015) |
| 16/30340156 DC : 0 | BS ISO 15064 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF THE ISOMER RATIO IN TOLUENEDIISOCYANATE (TDI) |
| ISO 10378:2016 | Copper, lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method |
| 18/30318765 DC : 0 | BS ISO 20260 - MAGNESIUM AND MAGNESIUM ALLOYS - DETERMINATION OF MERCURY |
| BS ISO 14898 : 1999 | PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF ACIDITY |
| PREN ISO 5164 : DRAFT 2012 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO/DIS 5164:2012) |
| NF ISO 9030 : 2000 | CRUDE PETROLEUM - DETERMINATION OF WATER AND SEDIMENT - CENTRIFUGE METHOD |
| 18/30357042 DC : 0 | BS EN 17130 - TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFUMARATE (DMFU) IN TEXTILE PRODUCT MATERIALS |
| BS ISO 22960:2008 | Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1, 10- phenanthroline |
| ISO 10469:2006 | Copper sulfide concentrates Determination of copper Electrogravimetric method |
| I.S. EN ISO 20536:2017 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF PHENOL IN FOOTWEAR MATERIALS (ISO 20536:2017) |
| BS 2000-236(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| BIS IS 1448-27 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 27: DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| ISO 14896:2009 | Plastics — Polyurethane raw materials — Determination of isocyanate content |
| I.S. EN ISO 5164:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| I.S. EN ISO 14896:2009 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 14362-2:2003-12 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE BY EXTRACTING THE FIBRES |
| BS ISO 22961:2008 | Titanium and titanium alloys. Determination of iron. Atomic absorption spectrometry |
| I.S. EN ISO 5163:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| BS ISO 13547-1:2014 | Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
| UNE 38863:2012 | Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry. |
| I.S. EN 14362-2:2003 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE BY EXTRACTING THE FIBRES |
| 01/120853 DC : DRAFT FEB 2001 | ISO/DIS 17710 PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF UNSATURATION BY MICROTITRATION |
| 02/120872 DC : DRAFT FEB 2002 | BS EN 14362-1 - TEXTILES - METHODS FOR THE DETECTION AND DETERMINATION OF CERTAIN LISTED AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DIRECT TEST ON COLOURED TEXTILES - DETECTION OF THE USE OF CERTAIN AZO COLORANTS THAT ARE ACCESSIBLE TO REDUCING AGENTS WITHOUT EXTRACTION |
| BS ISO 13547-2:2014 | Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic Acid digestion and inductively coupled plasma atomic emission spectrometric method |
| NF ISO 3734 : 2000 | PETROLEUM PRODUCTS - DETERMINATION OF WATER AND SEDIMENT IN RESIDUAL FUEL OILS - CENTRIFUGE METHOD |
| BS 6043-2.18(2001) : 2001 | METHODS OF SAMPLING AND TEST FOR CARBONACEOUS MATERIALS USED IN ALUMINIUM MANUFACTURE - ELECTRODE COKE - DETERMINATION OF TOTAL SULFUR BY THE ESCHKA METHOD |
| BS ISO 12739:2006 | Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method |
| UNE-EN ISO 16373-3:2015 | Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) |
| BIS IS 1448-9 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 9: DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| CEN ISO/TS 16186:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012) |
| I.S. EN ISO 16373-3:2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
| ISO 15064:2017 | Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI) |
| ISO 13291:2006 | Zinc sulfide concentrates Determination of zinc Solvent extraction and EDTA titrimetric method |
| ISO 12739:2006 | Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method |
| ISO 15247:2015 | Zinc sulfide concentrates Determination of silver content Acid dissolution and flame atomic absorption spectrometric method |
| S.R. CEN ISO/TS 16189:2013 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFORMAMIDE IN FOOTWEAR MATERIALS (ISO/TS 16189:2013) |
| EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
| BS ISO 15064:2010 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate |
| ISO 22961:2008 | Titanium and titanium alloys — Determination of iron — Atomic absorption spectrometry |
| ISO 26603:2017 | Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of total chlorine |
| ISO 16373-3:2014 | Textiles — Dyestuffs — Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
| ISO 17710:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration |
| ISO 384:2015 | Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments |
| BS EN ISO 5163:2014 | Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method |
| UNE-EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| EN ISO 385:2005 | Laboratory glassware - Burettes (ISO 385:2005) |
| EN ISO 16373-3:2014 | Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) |
| EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| EN ISO 4788:2005 | Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
| UNI EN ISO 5163 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| UNI EN ISO 14896 : 2009 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
| UNI EN ISO 5164 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| DIN EN ISO 16373-3 E : 2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
| BS 2000-236(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| BIS IS 915 : 2012 | LABORATORY GLASSWARE - ONE-MARK VOLUMETRIC FLASKS |
| DIN EN ISO 16373-3:2014-10 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
| UNI CEN ISO/TS 16186 : 2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYL FUMARATE (DMFU) IN FOOTWEAR MATERIALS |
| 03/314897 DC : DRAFT SEP 2003 | ISO 4788 - LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS |
| EN ISO 20536:2017 | Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials (ISO 20536:2017) |
| 12/30261559 DC : 0 | BS ISO 5164 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| 14/30272865 DC : 0 | BS ISO 13547-1 - COPPER, LEAD, ZINC AND NICKEL SULFIDE CONCENTRATES - DETERMINATION OF ARSENIC - PART 1: IRON HYDROXIDE CONCENTRATION AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| 16/30323964 DC : 0 | BS EN ISO 5165 - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| 05/30116640 DC : DRAFT APR 2005 | BS ISO 13291 - ZINC SULFIDE CONCENTRATES - DETERMINATION OF ZINC CONTENT - SOLVENT EXTRACTION AND EDTA TITRIMETRIC METHOD |
| BS 846:1985 | Specification for burettes |
| BS ISO 1042 : 98 AMD 10633 | LABORATORY GLASSWARE - ONE-MARK VOLUMETRIC FLASKS |
| 05/30116637 DC : DRAFT APR 2005 | BS ISO 10469 - COPPER SULFIDE CONCENTRATES - DETERMINATION OF COPPER CONTENT - ELECTROGRAVIMETRIC METHOD |
| BS ISO 10378:2016 | Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method |
| 03/314896 DC : DRAFT SEP 2003 | ISO 385 - LABORATORY GLASSWARE - BURETTES |
| 12/30238567 DC : 0 | BS EN ISO 16373-3 - TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARGINOGENIC EXTRACTABLE DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO/DIS 16373-3:2012) |
| 17/30351691 DC : 0 | BS EN ISO 20536 - FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - DETERMINATION OF PHENOL IN FOOTWEAR MATERIALS |
| BS 2000-237(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| BS EN ISO 20536:2017 | Footwear. Critical substances potentially present in footwear and footwear components. Determination of phenol in footwear materials (ISO 20536:2017) |
| ISO 20536:2017 | Footwear — Critical substances potentially present in footwear and footwear components — Determination of phenol in footwear materials |
| ECA EURAMET CG-19 : 2012 | GUIDELINES ON THE DETERMINATION OF UNCERTAINTY IN GRAVIMETRIC VOLUME CALIBRATION |
| ISO 22960:2008 | Titanium and titanium alloys — Determination of iron — Molecular absorption spectrometry using 1, 10-phenanthroline |
| S.R. CEN ISO/TS 16186:2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYL FUMARATE (DMFU) IN FOOTWEAR MATERIALS (ISO/TS 16186:2012) |
| 18/30357793 DC : 0 | BS EN 17132 - TEXTILES AND TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCT MATERIALS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH), METHOD USING CHROMATOGRAPHIC TECHNIQUES |
| BS 2000-41(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| ISO 13547-2:2014 | Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method |
| ISO 15028:2014 | Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine |
| ISO/TS 16186:2012 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 13547-1:2014 | Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method |
| ISO 22962:2008 | Titanium and titanium alloys — Determination of iron — Inductively coupled plasma atomic emission spectrometry |
| ISO/TS 16189:2013 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethylformamide in footwear materials |
| BS EN ISO 1042:2000 | Laboratory glassware. One-mark volumetric flasks |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
| UNE-EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| ISO 385:2005 | Laboratory glassware — Burettes |
| EN 14362-2 : 2003 COR 2005 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 2: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE BY EXTRACTING THE FIBRES |
| EN ISO 14896:2009 | Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009) |
| EN ISO 384:2015 | Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015) |
| EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| BS ISO 13291:2006 | Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method |
| ISO 14898:1999 | Plastics Aromatic isocyanates for use in the production of polyurethane Determination of acidity |
| BS 2000-237(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| PREN 17130 : DRAFT 2018 | TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFUMARATE (DMFU) IN TEXTILE PRODUCT MATERIALS |
| BS ISO 22962:2008 | Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry |
| ECA EURAMET CG-21 : 2013 | GUIDELINES ON THE CALIBRATION OF STANDARD CAPACITY MEASURES USING THE VOLUMETRIC METHOD |
| BS ISO 15028:2014 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of hydrolysable chlorine |
| 13/30278476 DC : 0 | BS ISO 15028 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF HYDROLYSABLE CHLORINE |
| BS ISO 17710:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration |
| 14/30272868 DC : 0 | BS ISO 13547-2 - COPPER, LEAD, ZINC AND NICKEL SULFIDE CONCENTRATES - DETERMINATION OF ARSENIC - PART 2: ACID DIGESTION AND INDUCTIVELY-COUPLED PLASMA ATOMIC EMISSON SPECTROMETRIC METHOD |
| IP 41 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| 96/711804 DC : DRAFT AUG 1996 | ISO/CD 15355 - STEEL AND IRON - DETERMINATION OF CHROMIUM CONTENT - INDIRECT TITRATION METHOD |
| 06/30160122 DC : 0 | ISO/DIS 26603 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF TOTAL CHLORINE |
| BS ISO 26603:2017 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine |
| OIML D 26 : 2010 | GLASS DELIVERY MEASURES - AUTOMATIC PIPETTES |
| 03/113239 DC : DRAFT SEP 2003 | BS ISO 15064 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF THE ISOMER RATIO IN TOLUENE DIISOCYANATE |
| UNI EN ISO 16373-3 : 2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) |
| UNI CEN ISO/TS 16189 : 2013 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFORMAMIDE IN FOOTWEAR MATERIALS |
| ISO 17299-1:2014 | Textiles — Determination of deodorant property — Part 1: General principle |
| ASTM E 1154 : 2014 : REDLINE | Standard Specification for Piston or Plunger Operated Volumetric Apparatus |
| I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
| ISO 16918-1:2009 | Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ONORM ONR CEN ISO/TS 16186 : 2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYL FUMARATE (DMFU) IN FOOTWEAR MATERIALS (ISO/TS 16186:2012) |
| BS EN ISO 385:2005 | Laboratory glassware. Burettes |
| DIN EN ISO 385:2005-07 | Laboratory glassware - Burettes (ISO 385:2005); German version EN ISO 385:2005 |
| DIN EN ISO 4788:2005-08 | Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
| CEN ISO/TS 16189:2013 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013) |
| DIN EN ISO 5163:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| AS ISO 19976.2:2020 | Copper, lead and zinc sulfide concentrates - Determination of cadmium Acid digestion and inductively coupled plasma atomic emission spectrometric method |
| ISO 385:2005 | Laboratory glassware — Burettes |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
| ISO 835:2007 | Laboratory glassware — Graduated pipettes |
| ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
| AS ISO 19976.1:2020 | Copper, lead and zinc sulfide concentrates - Determination of cadmium Flame atomic absorption spectrometric method |
| ISO 384:2015 | Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| OIML D 28 : 2004 | CONVENTIONAL VALUE OF THE RESULT OF WEIGHING IN AIR |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 4797:2015 | Laboratory glassware — Boiling flasks with conical ground joints |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.