Skip to content
Please enter a keyword to search

  • ISO 483:2005

    Current The latest, up-to-date edition.

    Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  11-11-2005

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 483:2005 establishes guidelines for the construction and use of enclosures with volumes less than 200 dm3, in order to obtain atmospheres of constant relative humidity at given temperatures, using saturated aqueous salt solutions, glycerol/water solutions or sulfuric acid/water solutions, for conditioning and testing plastics.

    It specifies the procedures to be followed to maintain the relative humidities of the conditioning and testing atmospheres within the required tolerances, at the temperatures specified by particular International Standards.

    The procedures described are intended for conditioning small quantities of materials prior to test, and for such tests as may be carried out entirely within a small enclosure, e.g. electrical tests. The guidelines described do not apply to enclosures requiring frequent opening.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 483 (11/2005)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 7783:2011 Paints and varnishes Determination of water-vapour transmission properties Cup method
    BS 3900-F13:1986 Methods of tests for paints; filiform corrosion test on steel
    DIN EN ISO 29664 E : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    16/30333382 DC : 0 BS EN ISO 22112 - DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES
    ISO 13302:2003 Sensory analysis — Methods for assessing modifications to the flavour of foodstuffs due to packaging
    09/30179580 DC : 0 BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
    ISO 1110:1995 Plastics Polyamides Accelerated conditioning of test specimens
    ISO 18907:2013 Imaging materials — Photographic films and papers — Wedge test for brittleness
    I.S. EN ISO 4623-1:2002 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
    UNI EN ISO 7783 : 2012 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD
    ISO 18437-2:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
    BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
    EN 12023 : 1996 SELF ADHESIVE TAPES - MEASUREMENT OF WATER VAPOUR TRANSMISSION IN A WARM HUMID ATMOSPHERE
    DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
    I.S. EN ISO 3336:1996 DENTISTRY - SYNTHETIC POLYMER TEETH
    I.S. EN 12023:1997 SELF ADHESIVE TAPES - MEASUREMENT OF WATER VAPOUR TRANSMISSION IN A WARM HUMID ATMOSPHERE
    04/30085464 DC : DRAFT JUN 2004 ISO 22112 - DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES
    BS ISO 18437-3 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD
    BS ISO 18437-2 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
    DIN EN ISO 22112:2016-04 (Draft) DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES (ISO 22112:2017)
    I.S. EN ISO 22112:2017 DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES (ISO 22112:2017)
    I.S. EN ISO 7783-1:1999 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS
    I.S. EN ISO 9142:2004 ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS
    07/30147100 DC : 0 ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD
    BS ISO 13302:2003 Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
    DIN EN ISO 7783:2012-02 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011)
    BS ISO 1110 : 1995 AMD 10263 PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS
    BS EN ISO 4623-1:2002 Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates
    ANSI IT9.7 : 1989 IMAGING MEDIA - DETERMINATION OF BRITTLENESS OF PHOTOGRAPHIC FILM - WEDGE BRITTLENESS TEST
    UNE-EN ISO 7783:2012 Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011)
    I.S. EN ISO 29664:2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    UNE-EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
    BS EN ISO 4623:1995 Paints and varnishes. Filiform corrosion test on steel
    EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
    EN ISO 22112:2017 Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017)
    08/30189225 DC : DRAFT DEC 2008 BS EN ISO 7783 - PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD
    BS ISO 29664 : 2010 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
    BS 7825-3.10:1998 Calibration of rubber and plastics test equipment. Calibration schedules Conditioning, sample and test piece preparation
    ISO 6077:1993 Photography — Photographic films and papers — Wedge test for brittleness
    BS 5466-9(1986) : 1986 AMD 8477 METHODS FOR CORROSION TESTING OF METALLIC COATINGS - SALINE DROPLETS CORROSION TEST (SD TEST)
    BS ISO 6077:1993 Photography. Photographic films and papers. Wedge test for brittleness
    BS 3900-G9(1996) : 1996 AMD 10384 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE OF FREE FILMS (DISH METHOD)
    BS EN ISO 29664:2017 Plastics. Artificial weathering including acidic deposition
    ISO 4623-1:2000 Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates
    DIN EN ISO 29664:2016-09 (Draft) PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
    ISO 18437-3:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method
    EN ISO 1110:1997 PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS
    ISO 4536:1985 Metallic and non-organic coatings on metallic substrates Saline droplets corrosion test (SD test)
    ISO 3336:1993 Dentistry — Synthetic polymer teeth
    ISO 22112:2017 Dentistry — Artificial teeth for dental prostheses
    BS EN ISO 22112:2017 Dentistry. Artificial teeth for dental prostheses
    BS EN 12023:1997 Self adhesive tapes. Measurement of water vapour transmission in a warm humid atmosphere
    ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
    EN ISO 4536 : 1995 METALLIC AND NON-ORGANIC COATINGS ON METALLIC SUBSTRATES - SALINE DROPLETS CORROSION TEST (SD TEST)
    EN ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
    EN ISO 7783-1:1999 Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998)
    EN ISO 3336 : 1996 DENTISTRY - SYNTHETIC POLYMER TEETH
    BS ISO 18437-4:2008 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method
    BS ISO 18907:2013 Imaging materials. Photographic films and papers. Wedge test for brittleness
    BS 7825-3.8:1998 Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties
    BS EN ISO 7783:2011 Paints and varnishes. Determination of water-vapour transmission properties. Cup method
    EN ISO 7783:2011 Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011)
    ISO 1663:2007 Rigid cellular plastics — Determination of water vapour transmission properties
    ISO 18437-4:2008 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
    I.S. EN ISO 1110:1998 PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS
    EN ISO 4623-1:2002 Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000)
    I.S. EN ISO 7783:2011 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011)
    DIN EN ISO 9142 E : 2004 ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY - AGEING CONDITIONS FOR TESTING BONDED JOINTS
    BS EN ISO 1110:1998 Plastics. Polyamides. Accelerated conditioning of test specimens
    BS EN ISO 3336:1996 Dentistry. Synthetic polymer teeth
    ISO 29664:2010 Plastics Artificial weathering including acidic deposition
    BS EN 29142:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
    BS EN ISO 4536:1995 Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)
    BS 3900-F13(2002) : 2002 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
    BS 3990(1995) : 1995 AMD 9229 SPECIFICATION FOR SYNTHETIC POLYMER TEETH

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective