ISO 4892-2:2013

Current

Current The latest, up-to-date edition.

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French

Published date: 28-02-2013

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 4892-2:2013 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects (temperature, humidity and/or wetting) that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes ISO 4892 (04/2001) Supersedes ISO/DIS 4892-2. (03/2013)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO 4892:1981 ISO 4892-2:2006 ISO 4892-2:2006/Amd 1:2009

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
ONORM EN ISO 4892-2 : 2013	Identical
UNI EN ISO 4892-2:2021	Identical
IS 17863 : Part 2 : 2022	Identical
NBN EN ISO 4892-2 : 2013	Identical
NBN EN ISO 4892-3 : 2016	Identical
NEN EN ISO 4892-2 : 2013	Identical
NS EN ISO 4892-2 : 2013	Identical
I.S. EN ISO 4892-2:2013	Identical
PN EN ISO 4892-2 : 2013	Identical
SAC GB/T 16422.2 : 1999	Identical
SN EN ISO 4892-2 : 2013	Identical
UNI EN ISO 4892-2 : 2013	Identical
SS-EN ISO 4892-2:2013	Identical
BS EN ISO 4892-2:2013	Identical
UNE-EN ISO 4892-2:2014	Identical
EN ISO 4892-2:2013	Identical
NF EN ISO 4892-2 : 2013	Identical
DIN EN ISO 4892-2:2013-06	Identical
DIN 53387:1989-04	Similar to
SANS 4892-2 : 1ED 2008	Identical
BS 2782-5.540E(1995) : 1995 AMD 10725	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 16434:2014	INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
DIN EN 10245-5:2012-01	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
07/30168088 DC : DRAFT AUG 2007	BS EN 13341 AMD 1 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED POLYETHYLENE, ROTATIONALLY MOULDED POLYETHYLENE AND POLYAMIDE 6 BY ANIONIC POLYMERIZATION TANKS - REQUIREMENTS AND TEST METHODS
UNE-EN 50620:2017	Electric cables - Charging cables for electric vehicles
PD CEN/TS 16599:2014	Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
DIN EN ISO 19712-2:2013-04	Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
02/103631 DC : DRAFT MAY 2002	BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS
15/30313602 DC : 0	BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
BS EN ISO 8936:2017	Awnings for leisure accommodation vehicles. Requirements and test methods
11/30213807 DC : 0	BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION
14/30303794 DC : 0	BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
06/30153650 DC : DRAFT JULY 2006	EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
DIN EN 15752-1:2014-10	GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
PREN 17142 : DRAFT 2017	MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
04/30113782 DC : DRAFT MAY 2004	ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
DIN EN ISO 8936:2015-09 (Draft)	AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
PREN 438-2 : DRAFT 2014	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 15651-2:2017	Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing
ISO 19821:2017	Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
DIN EN 15534-5:2014-04	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
12/30266874 DC	BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
16/30337938 DC : 0	BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 19712-3 : 2007	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
DIN EN ISO 29664 E : 2017	PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
BS EN 61969-3:2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
16/30342057 DC : 0	BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
03/319410 DC : DRAFT NOV 2003	BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING
BS ISO 11798:1999	Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
I.S. EN ISO 105-B10:2011	TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
I.S. EN IEC 62561-6:2018 COR 2018	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
05/30133040 DC : DRAFT APR 2005	BS EN 1866 - MOBILE FIRE EXTINGUISHERS
14/30310352 DC : 0	BS EN 12200-1 - PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS ISO/IEC 11801-1:2017	Information technology. Generic cabling for customer premises General requirements
DIN EN ISO 19712-2 E : 2013	PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
11/30229694 DC : 0	BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
13/30263803 DC : 0	BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
ASTM D 5071 : 2006	Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
UNE-EN ISO 19712-2:2013	Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
ISO 3917:2016	Road vehicles Safety glazing materials Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
I.S. EN 62561-4:2017	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
S.R. CEN/TS 16359:2012	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS
DIN EN 124-6:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
PREN 62275 : DRAFT 2014	CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED)
ISO 9370:2017	Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
DIN ISO 16938-1:2012-12	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008)
BS ISO 11617:2014	Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
I.S. EN 15534-4:2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
BS EN ISO 30013:2011	Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
BS EN 15752-1:2014	GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
BS EN 50526-1:2012	Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
15/30328730 DC : 0	BS EN 60794-1-22 - OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
17/30351022 DC : 0	BS EN 14836 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
04/19987165 DC : DRAFT SEP 2004	BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS
BS EN 60794-1-22:2012	OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
EN 60079-30-1:2017	Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ISO 3865:2005	Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material
12/30238119 DC : 0	BS ISO 18937 - IMAGING MATERIALS - PHOTOGRAPHIC REFLECTION PRINTS - METHODS FOR MEASURING INDOOR LIGHT STABILITY
08/30194268 DC : 0	BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
01/107289 DC : DRAFT OCT 2001	BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS
DIN EN 14963 E : 2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 17098-1:2018	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
DIN EN 13245-3 E : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS 2782-5.540F(1995) : AMD 10678	METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS
96/709570 DC : DRAFT JUL 1996	PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS
BS IEC 62790 : 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
PREN 12574-2 : DRAFT 2015	STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
CEI EN 62561-6 : 2012	LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
09/30197921 DC : 0	BS EN 62561-4 ED1 - REQUIREMENTS FOR LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR FASTENERS
UNI EN 15836-2 : 2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
12/30192217 DC (published 2012-03)	BS ISO 12856. Plastic railway sleepers (railroad ties)
BS EN 513:1999	UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
CEI EN 60335-2-109 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
15/30323520 DC : 0	BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
PD CEN ISO/TR 18486:2017	Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
ANSI INCITS 322 : 2015	INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
BS ISO 16938-2:2008	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 2: TEST WITHOUT COMPRESSION
09/30196635 DC : 0	BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS)
CSA C22.2 No. 62109-1 : 2016	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
08/30186166 DC : DRAFT JULY 2008	BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
UNI EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE 56875:2014	Kitchen furniture. Specifications, requirements, and test methods.
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UNI EN 15649-7 : 2010	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
I.S. EN 61914:2016	CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
UNI EN ISO 16474-2 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
BS ISO 5912 : 2003 AMD 15519	CAMPING TENTS
09/30176542 DC : 0	BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
09/30179580 DC : 0	BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
13/30263186 DC : 0	BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
CAN/CSA-C22.2 NO. 60079-30-1:17	Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015	METALLIC OUTLET BOXES
ISO 4665:2016	Rubber, vulcanized or thermoplastic — Resistance to weathering
EN 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
UNE 199051-1:2012	Road traffic management equipment. Variable message signs. Part 1: Equipment and functional specification
UNE-EN 50467:2012	Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 61969-3:2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV))
BS EN 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
EN IEC 60068-2-5:2018	Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
EN IEC 60099-8:2018	Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
I.S. EN 16281:2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 62109-1:2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. 355:2006	SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS
CEI EN 50526-1 : 2013	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN 513:1999	UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
I.S. EN 50289-4-17:2015	COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
CEI EN 61643-11 : 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
ISO 11963:2012	Plastics Polycarbonate sheets Types, dimensions and characteristics
EN 50620:2017	Electric cables - Charging cables for electric vehicles
BS EN 50539-11 : 2013	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 50618:2014	ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS
I.S. EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 15836-2:2010	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
I.S. EN 60794-3-70:2016	OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
I.S. EN 50620:2017	ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES
BS EN 16153 : 2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
IEC 60335-2-40:2018	Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
UNE-EN 15649-7:2010	Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices
BS EN 50548 : 2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ISO 28278-1:2011	Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
UNI ISO 11798 : 2011	INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS
I.S. EN 50548:2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ISO 14486:2012	Laminate floor coverings — Specification
IEC 62561-4:2010	Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
UNE-EN 60099-4:2016	Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SAE J 2527 : 2017	PERFORMANCE BASED STANDARD FOR ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS
15/30324370 DC : 0	BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
UNE-EN ISO 30013:2012	Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
IEC PAS 60092-510:2009	Electrical installations in ships - Part 510: Special features - High-voltage shore connection systems
UNE-EN 15534-5:2014	Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
NF ISO 10966 : 2011	SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 14963:2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 13655:2018	PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
ASTM D 5592 : 1994	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
EN 15534-6:2015+A1:2017	Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
IEC TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
EN 13206:2017	Plastics - Thermoplastic covering films for use in agriculture and horticulture
I.S. EN ISO 11963:2012	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
EN 60950-22:2017	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
CSA C22.2 No. 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN 13341:2011-04	Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
DIN EN 12574-2:2015-08 (Draft)	STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14323 E : 2017	WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
DIN EN 13484:2012-05	Helmets for users of luges
DIN EN 12492:2012-04	MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1078:2014-04	HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
DIN EN ISO 11403-3 E : 2002	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
UNE-EN 12200-1:2017	Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
BS EN 12574-2:2017	Stationary waste containers Performance requirements and test methods
BS EN ISO 12402-7 : 2007	PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 10288:2002	STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO LAYER EXTRUDED POLYETHYLENE BASED COATINGS
BS EN ISO 5674:2009	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
UNE-EN 671-2:2013	Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
UNE-EN 13575:2012	Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
BS EN 14323:2017	Wood-based panels. Melamine faced boards for interior uses. Test methods
IEC 62752:2016	In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
ISO 12402-7:2006	Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS IEC 62852 : 2014	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 12899-1:2007	Fixed, vertical road traffic signs Fixed signs
BS EN 1873 : 2014	PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
UNE-ISO 4141-1:2016	Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables
BS EN 13484:2012	Helmets for users of luges
DIN EN 15200:2007-08	SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN 14628:2005	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS EN 966 : 2012	HELMETS FOR AIRBORNE SPORTS
BS EN ISO 9142:2003	Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 12492:2012	Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN ISO 11403-3:2014	Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
BS EN 1384:2017	Helmets for equestrian activities
I.S. EN 10223-7:2012	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
I.S. EN ISO 7823-1:2003	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
EN 60099-4:2014	Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
IEC 60335-2-40:2018 RLV	Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 1078:2012+A1:2012	Helmets for pedal cyclists and for users of skateboards and roller skates
EN 13575:2012	Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
EN 10223-8:2013	Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 10223-7:2012	Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
EN ISO 5674:2009	Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
EN 62208:2011	Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
EN 12676-2 : 2000	ANTI-GLARE SYSTEMS FOR ROADS - PART 2: TEST METHODS
EN 10223-3:2013	Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
CEN/TR 581-4:2005	OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
EN 50164-4:2008	Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners
DIN ISO 10966:2012-02	SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION (ISO 10966:2011)
EN 10245-1:2011	Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN 124-6:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
CEN/TS 15534-1:2007	Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 10245-2:2011	Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 12574-2:2017	Stationary waste containers - Part 2: Performance requirements and test methods
EN 50539-11 : 2013 AMD 1 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 12899-1:2007	Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 10288:2002	Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
OVE/ONORM EN 61439-1 : 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 10245-3:2011	Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 1013:2012+A1:2014	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 10245-5:2011	Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 13341:2005+A1:2011	Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 124-5:2015	Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 15534-5:2014	Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN 15534-4:2014	Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
EN 13071 : 2002	SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
EN 13245-3:2010	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
ENV 12224 : 1996	GEOTEXTILES AND GEOTEXTILE RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
EN 50289-4-17:2015	Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
EN 50526-2:2014	Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
I.S. EN 13200-4:2006	SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
NBR IEC 60079-0 : 2013 ERRATA 2 2016	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
PD IEC/TR 61916:2017	ELECTRICAL ACCESSORIES - HARMONIZATION OF GENERAL RULES
PREN 1871 : DRAFT 2012	ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
UNI EN 15534-5 : 2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
09/30200407 DC : 0	BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
14/30299825 DC : 0	BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
BS EN 4708-001:2014	AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION
DIN EN 1866:2006-03	MOBILE FIRE EXTINGUISHERS
DIN EN 15649-7:2010-04	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
07/30166797 DC : 0
13/30277104 DC : 0	BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
DD ISO/TS 13434:2008	GEOSYNTHETICS - GUIDELINES FOR THE ASSESSMENT OF DURABILITY
15/30317639 DC : 0	BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
PD ISO/TS 19022:2016	Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
I.S. EN 15651-2:2017	SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
UNE-EN 15836-1:2010	Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
IEC 60950-22 REDLINE : 2ED 2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
95/102726 DC : DRAFT MARCH 1995	PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS
12/30258456 DC : 0	BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN IEC 60794-1-22:2018	Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods
15/30322585 DC : 0	BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
14/30313367 DC : 0	BS ISO 19862 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DURABILITY TO EXTENSION COMPRESSION CYCLING UNDER ACCELERATED WEATHERING
BS IEC 60092-306:2009	Electrical installations in ships Equipment. Luminaires and lighting accessories
CEI EN 62217 : 2013	POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
DIN EN ISO 8936 E : 2017	AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
BS EN 61914:2016	Cable cleats for electrical installations
BS ISO 16938-1:2008	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION
ISO 14572:2011	Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables
15/30326957 DC : 0	BS EN 62561-4 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
BS EN 10223-8:2013	STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
11/30215685 DC : 0	BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
PREN 16951-2 : DRAFT 2016	RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
BS PD ISO/TR 18486 : 2016	PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE
14/30243468 DC : 0	BS ISO 3917 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING
10/30205800 DC : 0	BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
17/30342148 DC : 0	BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 15534-4 : 2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
BS EN 1866-2:2014	Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
DIN ISO 16938-1 E : 2012	BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008)
09/30194273 DC : 0	BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
BS ISO 14572:2011