16/30292774 DC : 0
|
BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
13/30263803 DC : 0
|
BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
INCITS/ISO/IEC 15521 : 1998 : R2005
|
INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES |
INCITS/ISO/IEC 22050 : 2002
|
INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
I.S. EN ISO 9093-2:2002
|
SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC |
I.S. EN 50290-2-23:2013
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
DIN EN 14364 E : 2013
|
PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
ISO 8513:2016
|
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength |
DIN EN 40-7:2003-06
|
LIGHTING COLUMNS - PART 7: REQUIREMENTS FOR FIBRE REINFORCED POLYMER COMPOSITE LIGHTING COLUMNS |
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
NF EN ISO 10350-2 : 2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
EN 40-7:2002
|
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns |
PREN 14364 : DRAFT 2011
|
PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
UNE-EN 50290-2-23:2014
|
Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
07/30165210 DC : 0
|
BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
BS EN 50290-2-23:2013
|
Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
11/30246455 DC : 0
|
BS EN 1796 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
UNI EN 14364 : 2013
|
PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
INCITS/ISO/IEC 15521 : 1998
|
INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES |
UNI EN 1796 : 2013
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
IEC 62899-201:2016
|
Printed electronics - Part 201: Materials - Substrates |
DIN EN ISO 10350-2:2011-06
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
DIN EN 14364:2013-05
|
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
BS EN 40-7:2002
|
Lighting columns Requirements for fibre reinforced polymer composite lighting columns |
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
DIN EN 1796:2013-05
|
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
I.S. EN 1796:2013
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
I.S. EN 14364:2013
|
PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
NBR 15708-5 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
BS ISO 8513:2016
|
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength |
14/30304003 DC : 0
|
BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
BS 2782-3.326F(1997) : 1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
11/30246458 DC : 0
|
BS EN 14364 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
15/30320571 DC : 0
|
BS EN 60335-1 ED 5.0 /A2 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
00/120644 DC : DRAFT FEB 2000
|
ISO/DIS 10639-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS - (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
08/30180835 DC : DRAFT JUNE 2008
|
BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
ASTM D 5083 : 2017 : REDLINE
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
EN 1796:2013
|
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
ISO 17282:2004
|
Plastics — Guide to the acquisition and presentation of design data |
IEC 61241-1-1:1999
|
Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
DIN EN ISO 527-4:1997-07
|
Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) |
BS EN ISO 10350-2:2011
|
Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
EN ISO 10350-2:2011
|
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
UNI EN ISO 10350-2 : 2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
ONORM EN ISO 10350-2 : 2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
I.S. EN ISO 10350-2:2011
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
01/123351 DC : DRAFT SEP 2001
|
ISO/DIS 10639.3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
ISO 10639:2017
|
Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
ISO 10467:2004
|
Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
CEI EN 50290-2-23 : 2014
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
BS ISO 12817:2013
|
Fibre-reinforced plastic composites. Determination of open-hole compression strength |
BS ISO 13003:2003
|
Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions |
15/30311297 DC : 0
|
BS ISO 8513 - PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES - TEST METHODS FOR THE INITIAL LONGITUDINAL TENSILE STRENGTH |
16/30343625 DC : 0
|
BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
BS IEC 62899-201 : 2016
|
PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
ISO/IEC 15521:1998
|
Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-3 format using 125 m length tapes |
BS EN ISO 9093-2:2002
|
Small craft. Seacocks and through-hull fittings Non-metallic |
ISO 9093-2:2002
|
Small craft Seacocks and through-hull fittings Part 2: Non-metallic |
UNE-EN 1796:2014
|
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
BS EN ISO 527-4:1997
|
Plastics. Determination of tensile properties Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
BS EN 1796:2013
|
Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
UNE-EN ISO 10350-2:2011
|
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
UNE-EN 14364:2015
|
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
BS EN 14364:2013
|
Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints |
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
PREN 1796 : DRAFT 2011
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
ISO 12817:2013
|
Fibre-reinforced plastic composites — Determination of open-hole compression strength |
13/30271610 DC : 0
|
BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
ISO 13003:2003
|
Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions |
BS ISO 10639:2017
|
Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
EN 14364:2013
|
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
ISO/TR 15655:2003
|
Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
EN ISO 9093-2:2002
|
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
ISO 6691:2000
|
Thermoplastic polymers for plain bearings Classification and designation |
I.S. EN ISO 527-4:1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN ISO 527-4:1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN 50290-2-23:2013
|
COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |