ISO 5272:1979
Current
Current
The latest, up-to-date edition.
Toluene for industrial use — Specifications
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
01-02-1979
€41.00
Excluding VAT
Specifies requirements for two grades. Grade 1 (synthesis grade) is a high quality grade normally required only for the use as a chemical feedstock. Grade 2 (ordinary grade) is suitable for most normal commercial uses. The requirements are given in a table.
| Committee |
ISO/TC 47
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| API MPM CH10.1 : 2007(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| API MPM CH10.8:2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| DIN EN 16682:2016-01 (Draft) | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 5439 : 1995 : R2001 | Standard Test Method for Determination of Sediment in Moellon |
| ASTM D 473 : 2007 : R2012 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 4807 : 2005 : EDT 1 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 4007 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| I.S. EN 12606-2:2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| DEFSTAN 80-38/3(2009) : 2009 | THINNERS FOR: PAINT EPOXY MULTI-PACK, CELLULOSE NITRATE PAINTS, DOPES AND LACQUERS |
| ASTM D 473 : 2007 : R2017 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| BS 2000-57(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE SMOKE POINT OF KEROSINE |
| API MPM CH10.1 : 2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| DIN ISO 3733:2003-02 | PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| PREN 12592 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| API MPM CH10.6:2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| 05/30138264 DC : DRAFT AUG 2005 | EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| BS 2000-53(1999) : 1999 | CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| API MPMS CH10.6 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| BS 2000-450(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
| NF ISO 9030 : 2000 | CRUDE PETROLEUM - DETERMINATION OF WATER AND SEDIMENT - CENTRIFUGE METHOD |
| ASTM D 4807 : 2005 : R2010 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| I.S. ISO 589:1987 | HARD COAL - DETERMINATION OF TOTAL MOISTURE |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| ASTM D 1796 : 2011 : R2016 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 4067 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
| ASTM D 473 : 2007 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 4807 : 2005 : R2015 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| DIN EN 1428:2012-03 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| DIN EN 12850:2009-07 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| DIN EN ISO 4404-2:2011-03 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| ISO 3735:1999 | Crude petroleum and fuel oils — Determination of sediment — Extraction method |
| BS EN ISO 4404-2:2010 | Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Non-aqueous fluids |
| I.S. EN 1428:2012 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| I.S. EN ISO 4404-2:2010 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
| I.S. EN 12592:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| I.S. EN 12850:2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| ONORM EN 12850 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| API MPMS CH 10.1:2022 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method, Fourth Edition |
| API MPMS CH10.6:2022 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API MPM CH10.3:2003 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| DEFSTAN 91-74/1(1993) : 1993 AMD 1 1997 | LUBRICATING OIL, STEAM TURBINE AND GEAR, EXTREME PRESSURE JOINT SERVICE DESIGNATION: OEP-80 |
| API MPM CH10.8 : 2005 : R2010 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| API MPMS CH10.3 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| 13/30255303 DC : 0 | BS EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| BS ISO 6245 : 2001 AMD 15249 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| BS 2000-1(1982) : 1982 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - ACIDITY OF PETROLEUM PRODUCTS AND LUBRICANTS (NEUTRALIZATION VALUE) |
| BS 2000-291(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| BIS IS 1448-30 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| BS 2000-4(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH |
| NF ISO 3734 : 2000 | PETROLEUM PRODUCTS - DETERMINATION OF WATER AND SEDIMENT IN RESIDUAL FUEL OILS - CENTRIFUGE METHOD |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| API MPMS CH10.8 : 2005(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| ASTM D 1796 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| IP 459-2 : 2000 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION |
| BS 2000-291(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS - AZEOTROPIC DISTILLATION METHOD |
| ASTM D 1796 : 2011 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 5439 : 1995 | Standard Test Method for Determination of Sediment in Moellon |
| ASTM D 4807 : 2005 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| DIN EN 12592:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| ISO 4404-2:2010 | Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| ASTM D 5439 : 1995 : R2006 | Standard Test Method for Determination of Sediment in Moellon |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| DIN 51581-1:2011-09 | Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test |
| BS ISO 12156-1:1997 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| ASTM D 4007 : 2011 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 12156-1:2016 | Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method |
| BS EN 12606-2:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content Method by extraction |
| BS EN 1428:2012 | Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method |
| BS EN 12592:2014 | Bitumen and bituminous binders. Determination of solubility |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| BS EN 12850:2009 | Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions |
| BS EN ISO 3735:1999 | Crude petroleum and fuel oils. Determination of sediment. Extraction method |
| IP 488 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 16682:2017 | Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| EN ISO 14528-2:1999 | Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN ISO 4404-2:2010 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| 04/30105010 DC : DRAFT JUL 2004 | ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS 2882:1980 | Method for determination of water and sediment in crude petroleum and fuel oils (centrifuge method) |
| ASTM D 4007 : 2011 : R2016 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| NF EN 16682 : 2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| ASTM D 473 : 2007 : R2012 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| API MPM CH10.3 REDLINE : 2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| ASTM D 473 : 2007 : R2017 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 4007 : 2011 : R2016 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 5439 : 1995 : R2012 | Standard Test Method for Determination of Sediment in Moellon |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| EN 12606-2:1999 | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction |
| UNE-EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| UNE-EN 12592:2015 | Bitumen and bituminous binders - Determination of solubility |
| UNE-EN ISO 4404-2:2011 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| API MPM CH10.3:2022 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| BS 2000-47(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| BS 2000-47(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY |
| BS 2000-488(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMEN EMULSIONS |
| BS 2000-488(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PH VALUE OF BITUMINOUS EMULSIONS |
| BS 4382(1980) : 1980 AMD 8898 | METHOD FOR DETERMINATION OF SEDIMENT IN CRUDE PETROLEUM AND FUEL OILS (EXTRACTION METHOD) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.