Skip to content
Please enter a keyword to search

  • ISO 5359:2014

    Current The latest, up-to-date edition.

    Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  30-09-2014

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 5359:2014 specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen, nitrous oxide, medical air, helium, carbon dioxide, xenon, specified mixtures of the gases listed above, oxygen-enriched air, air for driving surgical tools, nitrogen for driving surgical tools, and for use with vacuum. It applies to hose assemblies operating at pressures up to 1 400 kPa and for vacuum systems at pressures not greater than 60 kPa absolute. It does not specify the dimensions and allocation of the gas-specific inlet and outlet connectors for the hose assemblies.It does not specify requirements for coaxial hoses used for the supply and removal of air for driving surgical tools.Nor does it specify the intended uses of hose assemblies.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 5359. (10/2014)
    Document Type Standard
    Product Note THIS STANDARD ALSO REFER-SS 8752430:2004, JIS T 7101:2006,CGA V-5, CGA C-9 This standard is identical to EN ISO 5359 : 2014
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 10524-4:2008-09 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    CSA Z8835.3 : 2008 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    I.S. EN 740:1999 ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS
    CSA Z10524-3 : 2012 : R2017 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    15/30287229 DC : 0 BS EN ISO 80369-1 - SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    04/30084857 DC : DRAFT JUN 2004 BS EN ISO 10524-1 - PRESSURE REGULATORS FOR USE WITH MEDICAL GAS SYSTEMS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    CSA Z10524-1 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    AAMI ISO 80369-1 : 2010 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    BIS IS/ISO 10524-1 : 2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    01/560793 DC : DRAFT FEB 2001 IEC/DIS 60601-2-13 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ANAESTHETIC SYSTEMS
    09/30203808 DC : 0 BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    UNE-EN 15908:2011 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    13/30242951 DC : 0 BS ISO 16571 - MEDICAL GAS SYSTEMS - SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
    DIN EN ISO 8835-3:2011-02 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    12/30266576 DC : 0 BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES
    BS EN 60601-2-13:2006 Medical electrical equipment Particular requirements for the safety and essential performance of anaesthetic systems
    05/30128373 DC : DRAFT JAN 2005 ISO 7396-2 - MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS
    05/30129374 DC : 0 ISO 15002 - FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    CSA Z10651.6 : 2006 : R2015 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
    CSA Z10651-5 : 2008 : R2013 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    BIS IS/ISO 10524-3 : 2005 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    BIS IS/ISO 10079-3 : 1999 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
    BIS IS/ISO 9170-1 : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    04/30088362 DC : DRAFT NOV 2004 ISO 10651-5 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY VENTILATORS
    CSA Z10083 : 2008 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    CAN/CSA-C22.2 NO. 80601-2-67:17 Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen conserving equipment (Adopted ISO 80601-2-67:2014, first edition, 2014-06-01, with Canadian deviations)
    CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    DIN EN ISO 10524-1:2006-05 PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    BS EN ISO 18082 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014)
    BS EN ISO 7396-1:2016 Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum
    I.S. EN ISO 10524-4:2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOWPRESSURE REGULATORS
    BS EN ISO 80601-2-12:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators
    I.S. ISO 7396:1989 NON-FLAMMABLE MEDICAL GAS PIPELINE SYSTEMS
    UNI CEI EN ISO 80369-1 : 2011 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
    ISO 16571:2014 Systems for evacuation of plume generated by medical devices
    CSA ISO 10079-3:14 (R2019) Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (Adopted ISO 10079-3:2014, third edition, 2014-05-01)
    ONORM EN ISO 10524-1 : 2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems
    ISO 10524-3:2005 Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves
    ASTM F 920 : 1993 : R1999 Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans (Withdrawn 2007)
    BS EN ISO 80601-2-13:2012+A2:2019 Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
    UNE-EN ISO 11197:2016 Medical supply units (ISO 11197:2016)
    BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
    EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    ISO 10524-4:2008 Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
    ISO 8835-5:2004 Inhalational anaesthesia systems Part 5: Anaesthetic ventilators
    UNI EN ISO 9170-1 : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
    EN ISO 80601-2-13:2012 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
    DIN EN 15908:2011-01 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    BS EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    CAN/CSA-ISO 16571:16 SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
    16/30314880 DC : 0 BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    BS EN ISO 80601-2-13:2012 Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
    09/30173644 DC : 0 BS EN ISO 80369-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 80601-2-72:2015 Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    PD ISO/TR 17784:2003 Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
    16/30329598 DC : 0 BS ISO 11195 - GAS MIXERS FOR MEDICAL USE - STAND-ALONE GAS MIXERS
    DIN EN ISO 80601-2-72:2016-04 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    UNE-EN ISO 80369-1:2011 Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010)
    DIN EN ISO 15002:2008-11 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    UNI EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    CSA Z10524 : 2002 PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS
    CAN/CSA-Z15002:12 (R2017) Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations)
    13/30276231 DC : 0 BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    09/30195283 DC : 0 BS EN 15908 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    05/30129363 DC : DRAFT AUG 2005 ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    CSA Z1500:2012 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    BS 5724-2.204(1999) : 1999 ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS
    CSA Z10651-5 : 2008 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    ISO 11197:2016 Medical supply units
    I.S. EN 60601-2-13:2006 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
    ANSI/AAMI/ISO 16142-1:2016 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    CEI UNI EN ISO 80369-1 : 2011 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    CSA ISO 11195 : 2014 GAS MIXERS FOR MEDICAL USE - STAND-ALONE GAS MIXERS
    BS EN ISO 10524-1:2006 Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices
    NF EN 60601 2-13 : 2007 AMD 1 2007 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
    UNI EN ISO 10524-3 : 2013 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    ISO 9170-1:2017 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
    DIN EN ISO 17510-1:2009-07 Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007)
    UNE-EN ISO 21969:2010 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
    UNE-EN ISO 80601-2-13:2013 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
    ONORM EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    I.S. EN ISO 17510-1:2009 SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT
    EN ISO 17510-1:2009 Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007)
    ONORM EN 1789 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    DIN EN ISO 10651-2:2011-06 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    I.S. EN ISO 21969:2009 HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS
    DIN EN 1789:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN ISO 10079-3:2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    12/30262133 DC : 0 BS ISO 11197 - MEDICAL SUPPLY UNITS
    I.S. EN ISO 18082:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017)
    CSA Z10524-1 : 2012 : R2017 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    NF EN ISO 8835-3 : 2009 AMD 1 2011 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    17/30362339 DC : 0 BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING
    14/30289772 DC : 0 BS EN 1789:2007+A1:2010/A2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    DIN EN ISO 80601-2-72 E : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    14/30290166 DC : 0 BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    AAMI ISO 10651-5 : 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    BS EN 15908:2010 Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    13/30255929 DC : 0 BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM
    BS EN 60601-2-12:2006 Medical electrical equipment Particular requirements for the safety of lung ventilators. Critical care ventilators
    BS ISO 16142-1:2016 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
    BS ISO 10651-5:2006 Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators
    AAMI ISO 10079-3 : 1999 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
    CSA Z10079.3 : 2003 : R2013 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
    04/30099768 DC : DRAFT DEC 2004 PREN ISO 8835-3 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: ANAESTHETIC GAS SCAVENGING SYSTEMS - TRANSFER AND RECEIVING SYSTEMS
    03/103294 DC : DRAFT JAN 2003 BS EN ISO 10651-6 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME CARE VENTILATORY SUPPORT DEVICES
    CSA Z10524-4 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    CSA Z10651.6 : 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
    CEI EN 60601-2-12 : 2007 MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
    PREN ISO 80369-1 : DRAFT 2009 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 10524-1:2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    CSA Z8382 : 1994 RESUSCITATORS INTENDED FOR USE WITH HUMANS
    I.S. EN ISO 80601-2-12:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel
    DIN EN ISO 7396-1:2016-09 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
    CSA ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    CSA Z7396.2 : 2002 MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS
    I.S. EN ISO 80601-2-13:2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
    EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
    EN ISO 80369-1:2010 Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010)
    ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    NF EN ISO 11197 : 2016 MEDICAL SUPPLY UNITS
    DIN EN ISO 10651-6:2011-06 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
    DIN EN 13718-2:2015-05 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    DIN EN ISO 10079-3:2014-09 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    ISO 8835-3:2007 Inhalational anaesthesia systems Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems
    UNE-EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    BS EN ISO 11196:1997 Anaesthetic gas monitors
    ISO 10651-2:2004 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators for ventilator-dependent patients
    BS EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
    EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008)
    ONORM EN ISO 9170-1 : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    I.S. EN 1789:2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    EN 1789:2007+A2:2014 Medical vehicles and their equipment - Road ambulances
    ONORM EN 13718-2 : 2015 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    UNI EN ISO 10651-2 : 2009 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR- DEPENDENT PATIENTS
    UNI EN ISO 8835-5 : 2009 INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
    UNI EN ISO 7396-2 : 2007 MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS
    UNI EN ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    UNI EN ISO 21969 : 2010 HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS
    UNI EN ISO 10651-6 : 2009 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
    ONORM EN ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    BS ISO 16571:2014 Systems for evacuation of plume generated by medical devices
    UNI EN 15908 : 2010 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    15/30322333 DC : 0 BS EN ISO 18082:2014/AMD 1 - ANAESTETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    I.S. EN ISO 7396-2:2007 MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS
    13/30264413 DC : 0 BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    07/30147572 DC : DRAFT SEP 2007 BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
    PREN ISO 11197 : DRAFT 2012 MEDICAL SUPPLY UNITS (ISO/DIS 11197:2012)
    BS 7259-2(1993) : AMD 9349 NON-ELECTRICAL MEDICAL SUCTION EQUIPMENT - SPECIFICATION FOR SUCTION EQUIPMENT POWERED FROM VACUUM OR PRESSURE SOURCE
    ONORM EN ISO 17510-1 : 2009 SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT
    CSA Z10079.3 : 2003 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
    UNI EN ISO 8835-3 : 2010 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    BIS IS/ISO 15002 : 2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    03/103293 DC : DRAFT JAN 2003 BS EN ISO 10651-2 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    CSA Z9170.1 : 2011 : R2015 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
    CSA Z10079.3:2003 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
    CSA Z9170.1 : 2011 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
    CSA Z10651-5 : 2008 : R2018 Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators
    CSA Z10651.2: 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    I.S. EN ISO 7396-1:2016 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
    CSA Z8835.5 : 2006 INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
    I.S. EN ISO 15002:2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    I.S. EN ISO 80601-2-72:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    I.S. EN 15908:2010 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    EN ISO 11197:2016 Medical supply units (ISO 11197:2016)
    UNI EN ISO 17510-1 : 2009 SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT
    BS EN ISO 10524-3 : 2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    ISO 80369-1:2010 Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements
    DIN EN ISO 9170-1 E : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    DIN EN ISO 10524-3:2013-06 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013)
    UNE-EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
    DIN EN ISO 9170-1:2016-09 (Draft) TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    BS EN ISO 11197:2009 Medical supply units
    DIN EN ISO 80369-1:2015-09 (Draft) SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    ISO 7396-1:2016 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
    ISO 16964:2015 Gas cylinders Flexible hoses assemblies Specification and testing
    I.S. EN 60601-2-12:2006 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
    ISO 10651-5:2006 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators
    EN ISO 80601-2-12:2011/AC:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    ISO 80601-2-12:2011 Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    DIN EN ISO 8835-5:2009-07 INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS
    BS EN ISO 17510-1:2009 Sleep apnoea breathing therapy Sleep apnoea breathing therapy equipment
    UNE-EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
    BS EN ISO 10651-6:2009 Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home-care ventilatory support devices
    BS EN ISO 10079-3:2014 Medical suction equipment Suction equipment powered from a vacuum or positive pressure gas source
    ISO 80601-2-72:2015 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    ONORM EN ISO 15002 : 2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    ISO 18082:2014 Anaesthetic and respiratory equipment Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    BS EN 1789 : 2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 1789:2007 Medical vehicles and their equipment - Road ambulances
    BS EN 13718-2:2015 Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances
    BS EN ISO 10651-2:2004 Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home care ventilators for ventilator-dependent patients
    ISO 10651-6:2004 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory support devices
    IEC 60601-2-13:2003+AMD1:2006 CSV Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems
    BS EN 740:1999 Anaesthetic workstations and their modules. Particular requirements
    I.S. EN 13718-2:2015 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    ISO 10079-3:2014 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source
    UNI EN ISO 80601-2-13 : 2013 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
    I.S. EN 13718-2:2015+A1:2020 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    EN 15908:2010 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    EN ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    EN ISO 10651-2:2009 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004)
    EN ISO 18082:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017)
    EN ISO 10651-6:2009 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004)
    EN ISO 8835-5:2009 Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)
    EN 740:1998/A1:2004 ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS
    EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    EN ISO 8835-3:2009/A1:2010 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
    EN ISO 7396-2:2007 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
    I.S. EN ISO 10524-3:2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005)
    CSA Z10524-3 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    06/30116855 DC : 0 BS ISO 10524-4 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT
    DIN ISO 10083:2008-12 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    BS EN ISO 8835-3 : 2009 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    I.S. EN ISO 8835-5:2009 INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS
    I.S. EN ISO 10651-2:2009 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    NF EN ISO 10524-3 : 2006 AMD 1 2013 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
    UNI EN ISO 10524-4 : 2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
    BS ISO 11197 : 2016 MEDICAL SUPPLY UNITS
    BS EN ISO 10524-4:2008 Pressure regulators for use with medical gases Low-pressure regulators
    I.S. EN ISO 80369-1:2010 SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
    DIN EN 15908 E : 2011 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES
    CSA ISO 11196 : 0 ANAESTHETIC GAS MONITORS
    BS ISO 16964:2015 Gas cylinders. Flexible hoses assemblies. Specification and testing
    BIS IS/ISO 10524-4 : 2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    BS EN ISO 80369-1:2010 Small bore connectors for liquids and gases in healthcare applications General requirements
    BS EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum
    CSA Z10651.6 :2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
    CSA Z10083 : 2008 : R2013 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    CAN/CSA-Z10524-4:12 (R2017) Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations)
    CSA Z17510.1 : 2010 SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT
    04/30084855 DC : 0 PREN ISO 10083 - OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
    ISO 11195:2018 Gas mixers for medical use — Stand-alone gas mixers
    CSA Z10651.2 : 2006 : R2015 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    ISO 5358:1992 Anaesthetic machines for use with humans
    I.S. EN ISO 9170-1:2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    ISO 80601-2-67:2014 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
    I.S. EN ISO 8835-3:2009 INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
    NF EN ISO 10524-1 : 2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
    I.S. EN ISO 11197:2016 MEDICAL SUPPLY UNITS (ISO 11197:2016)
    UNI EN ISO 15002 : 2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    ASTM F 1343 : 2002 Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems (Withdrawn 2011)
    CEI EN 60601-2-13 : 2007 MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
    EN ISO 10524-3:2006/A1:2013 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005/AMD 1:2013)
    DIN EN ISO 7396-2:2007-07 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
    BS EN ISO 7396-2:2007 Medical gas pipeline systems Anaesthetic gas scavenging disposal systems
    ISO 17510-1:2007 Sleep apnoea breathing therapy Part 1: Sleep apnoea breathing therapy equipment
    BS EN ISO 8835-5:2009 Inhalational anaesthesia systems Anaesthesia ventilators
    ISO 7396-2:2007 Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems
    EN ISO 11196 : 1997 ANAESTHETIC GAS MONITORS
    EN 60601-2-13 : 2006 AMD 1 2007 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
    EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
    EN 60601-2-12:2006 Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators
    UNI EN 1789 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    DIN EN ISO 10079-3:2000-03 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
    ISO 80601-2-13:2011 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
    EN 15986:2011 Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates
    CGSB 24.2 : M86 IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
    IEC TR 60788:2004 Medical electrical equipment - Glossary of defined terms
    IEC 60601-1-6:2010+AMD1:2013 CSV Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
    ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
    CGA C 9 : 2013 STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE
    IEC 62366:2007+AMD1:2014 CSV Medical devices - Application of usability engineering to medical devices
    ISO 32:1977 Gas cylinders for medical use — Marking for identification of content
    ISO 80601-2-12:2011 Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    ISO 10524-3:2005 Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves
    ISO 11197:2016 Medical supply units
    EN 15908:2010 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    EN 1089-3:2011 Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding
    CGA V 5 : 2008(R2013) DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS)
    ISO 7751:2016 Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure
    AS 2896-2011 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
    ISO 14155:2011 Clinical investigation of medical devices for human subjects Good clinical practice
    AS 4484:2016 Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding
    ISO 1402:2009 Rubber and plastics hoses and hose assemblies Hydrostatic testing
    ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
    ISO 14971:2007 Medical devices Application of risk management to medical devices
    ISO 4135:2001 Anaesthetic and respiratory equipment Vocabulary
    ISO 10524-1:2006 Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices
    ISO 8033:2006 Rubber and plastics hoses Determination of adhesion between components
    ISO 18082:2014 Anaesthetic and respiratory equipment Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
    ISO 7396-1:2016 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
    ISO 9170-1:2008 Terminal units for medical gas pipeline systems Part 1: Terminal units for use with compressed medical gases and vacuum
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective