• There are no items in your cart

ISO 5598:2008

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Fluid power systems and components Vocabulary

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

14-02-2020

Language(s)

English, English - French

Published date

19-09-2008

ISO 5598:2008 establishes the vocabulary, in English, French and German, for all fluid power systems and components, excluding aerospace applications and compressed air supply installations.

DevelopmentNote
DRAFT ISO/DIS 5598 is also available for this standard. (03/2018)
DocumentType
Standard
Pages
177
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

BS 5540-7:1991 Evaluating particulate contamination of hydraulic fluids Method of determining the level of contamination (by the gravimetric method)
ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
BS ISO 8573-3:1999 Compressed air Test methods for measurement of humidity
99/541173 DC : DRAFT OCT 1999 BS EN 13731 - SPECIFICATION FOR LIFTING BAGS FOR FIRE AND RESCUE SERVICE USE
ANSI B93.100M : 1987 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - METHODS OF TEST
NFPA T2.13.7 : 1997 : R2014 HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI
07/30170703 DC : DRAFT AUG 2007 BS ISO 6099 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES
NFPA T2.6.1 : 2001 : R2014 FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT
NFPA T3.5.26 : 2000 : R2005 HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE
13/30265681 DC : 0 BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD
UNE-EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
BS ISO 8131:1992 Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
BS ISO 4392-1:2002 Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure
SAE ARP 4386 : 2017 TERMINOLOGY AND DEFINITIONS FOR AEROSPACE FLUID POWER, ACTUATION AND CONTROL TECHNOLOGIES
ISO 14617-15:2002 Graphical symbols for diagrams Part 15: Installation diagrams and network maps
BS ISO 10770-1:2009 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves
05/30125061 DC : DRAFT MAR 2005 ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS
01/714184 DC : DRAFT OCT 2001 ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS
BS ISO 6981:1992 Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions
NFPA T3.19.25 : 2004 : R2014 INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES
BS ISO 19973-1:2015 Pneumatic fluid power. Assessment of component reliability by testing General procedures
BS ISO 14617-2:2002 Graphical symbols for diagrams Symbols having general application
ISO 3601-4:2008 Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings)
BS ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Vocabulary
98/706004 DC : DRAFT APR 1998 ISO/CD 3601-6 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 6: RECOMMENDED ELASTOMERIC MATERIALS
13/30268516 DC : 0 BS ISO 3320 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES
UNE-EN ISO 1179-1:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
BS 5944-6:1992 Measurement of airborne noise from hydraulic fluid power systems and components Method of test for pumps using a parallelepiped microphone array
04/104967 DC : DRAFT APR 2004 ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS ISO 11170:2013 Hydraulic fluid power. Sequence of tests for verifying performance characteristics of filter elements
BS ISO 5782-2:1997 Pnuematic fluid power. Compressed air filters Test methods to determine the main characteristics to be included in supplier\'s literature
ISO 4393:2015 Fluid power systems and components Cylinders Basic series of piston strokes
BS ISO 17567:2005 Agriculture and forestry tractors and implements. Hydraulic power beyond
PD ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
13/30250817 DC : 0 BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
ISO 7789:2007 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
BS 7780-1:1994 Specification for rotary shaft lip type seals Nominal dimensions and tolerances
ISO/TR 16194:2017 Pneumatic fluid power Assessment of component reliability by accelerated life testing General guidelines and procedures
BS EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal
BS ISO 5599-2:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
ISO 6301-1:2017 Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
BIS IS 8384 : 2013 HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
10/30198892 DC : 0 BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
BS 7275-3:1995 Determination of hydraulic fluid power motor characteristics Method at constant flow and at constant torque
09/30199986 DC : 0 BS ISO 15524 - PNEUMATIC FLUID POWER - SINGLE ROD SHORT STROKE CYLINDERS
ANSI B93.82M : 87(R1993) HYDRAULIC FLUID POWER - FILTERS - STATEMENT OF REQUIREMENTS
98/711905 DC : DRAFT AUG 1998 ISO/CD 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
ISO/TR 19972-1:2009 Hydraulic fluid power Methods to assess the reliability of hydraulic components Part 1: General procedures and calculation method
BS ISO 8434-1 : 94 AMD 9583 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS
08/30178054 DC : DRAFT FEB 2008 BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
14/30270986 DC : 0 BS ISO 12829 - HYDRAULIC SPIN-ON FILTERS WITH FINITE LIVES - METHOD FOR VERIFYING THE RATED FATIGUE LIFE AND THE RATED STATIC BURST PRESSURE OF THE PRESSURE-CONTAINING ENVELOPE
ISO 16031-2:2003 Aerospace fluid systems O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes Part 2: Standard tolerances for non-hydraulic systems
05/30098238 DC : 0 ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE
08/30176286 DC : DRAFT JAN 2008 BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 3: DISCHARGE TEST AS AN ALTERNATE TEST METHOD
BS ISO 11158:2009 Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
DIN ISO 12238 E : 2005 PNEUMATIC FLUID POWER - DIRECTIONAL CONTROL VALVES - MEASUREMENT OF SHIFTING TIME
BS ISO 16908:2014 Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation
DIN ISO 12151-3 E : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS (ISO 12151-3:2010)
BS ISO 10372:1992 Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
13/30258990 DC : 0 BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION
ISO 3601-3:2005 Fluid power systems O-rings Part 3: Quality acceptance criteria
BS ISO 10762:2015 Hydraulic fluid power. Mounting dimensions for cylinders, 10 MPa (100 bar) series
BS ISO 16431:2012 Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems
DIN ISO 6149-3:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
98/714983 DC : DRAFT SEP 1998 ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS EN 50353:2001 Insulating oil. Determination of fibre contamination by the counting method using a microscope
BS ISO 5596:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
BS 7389-1:1990 Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector)
NFPA T3.21.3 : 2008 : R2013 PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS
BS ISO 12151-2:2003 Connections for hydraulic fluid power and general use. Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings
03/313810 DC : 0 EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
BS ISO 14085-6:2015 Aerospace series. Hydraulic filter elements. Test methods Initial cleanliness level
DIN ISO 10100 E : 2013 HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TEST (ISO 10100:2001 + AMD.1:2012)
07/19969755 DC : 0 BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE
BS ISO 15086-1:2001 Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Hydraulic fluid power. Determination of the fluid borne noise characteristics of components and systems. Introduction
BS ISO 8434-2:2007 Metallic tube connections for fluid power and general use 37° flared connectors
04/30098195 DC : DRAFT JUL 2004 ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
00/715331 DC : 0 ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
BS ISO 11011 : 2013 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT
13/30276381 DC : 0 BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS
BS ISO 14085-3:2015 Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity
17/30347219 DC : 0 BS ISO 6099 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES
BS ISO 7425-1:1988 Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Piston seal housings
DIN ISO/TS 16952-1:2007-03 TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES
ISO 12151-3:2010 Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
05/30032019 DC : DRAFT SEP 2005 ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
NFPA T3.21.20 : 2007 : R2012 PNEUMATIC FLUID POWER - ELECTRICAL CONNECTIONS FOR VALVE ISLANDS - CORRESPONDENCE BETWEEN SOLENOIDS AND ELECTRICAL CONNECTOR PINS AND SOCKETS
PD ISO/TR 17165-2:2006 Hydraulic fluid power. Hose assemblies Recommended practices for hydraulic hose assemblies
BS ISO 14617-5:2002 Graphical symbols for diagrams Measurement and control devices
13/30271038 DC : 0 BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves
14/30280597 DC : 0 BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
PD ISO/TR 19972-1:2009 Hydraulic fluid power. Methods to assess the reliability of hydraulic components General procedures and calculation method
98/714984 DC : DRAFT SEP 1998 ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS
18/30333968 DC : 0 BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT
BS 7780-5:1994 Specification for rotary shaft lip type seals Identification of visual imperfections
07/30144376 DC : 0 BS ISO 3601-4 - FLUID POWER SYSTEMS - O-RINGS - PART 4: ANTI-EXTRUSION RINGS (BACK-UP RINGS)
BS 4575-2:1987 Fluid power transmission and control systems Code of practice for pneumatic equipment and systems
BS ISO 15217:2000 Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
09/30171027 DC : 0 BS ISO 11171 - HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS
ISO 13726:2008 Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
96/709825 DC : DRAFT JUL 1996 ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80
BS ISO 3322:1985 Fluid power systems and components. Cylinders. Nominal pressures
BS ISO 6022:2006 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
BS ISO 10946:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
BS 6494-4:1989 Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
NFPA T3.21.8 : 2008 : R2013 PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
BS EN ISO 1179-3:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
09/30196757 DC : 0 BS ISO 10041-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINATE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES
01/714272 DC : 0 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
06/30128831 DC : DRAFT MAR 2006 ISO 6020-1 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 1: MEDIUM SERIES
NF ISO 5596 : 2000 HYDRAULIC FLUID POWER - GAS-LOADED ACCUMULATORS WITH SEPARATOR - RANGES OF PRESSURES AND VOLUMES AND CHARACTERISTIC QUANTITIES
05/30075032 DC : DRAFT AUG 2005 ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID
NFPA T3.28.9 : 1989 : R2009 FLUID POWER SYSTEMS AND PRODUCTS - MOVING PARTS FLUID CONTROLS - METHOD OF DIAGRAMMING
00/715333 DC : 0 ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
NFPA T3.19.7 : 1978 : R2012 CAVITY DIMENSIONS FOR FLUID POWER EXCLUSION DEVICES (INCH SERIES)
BS ISO 12151-5:2007 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends
SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
BS ISO 6194-5:2008 Rotary-shaft lip-type seals incorporating elastomeric sealing elements Identification of visual imperfections
02/712438 DC : DRAFT OCT 2002 ISO/DIS 21287 - PNEUMATIC FLUID POWER - CYLINDERS - COMPACT CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 20 MM TO 100 MM
NFPA T3.28.9 : 1989 FLUID POWER SYSTEMS AND PRODUCTS - MOVING PARTS FLUID CONTROLS - METHOD OF DIAGRAMMING
05/30125053 DC : DRAFT MAY 2005 ISO 6301-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR LUBRICANTS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN THE SUPPLIERS LITERATURE
NF ISO 7241-1 : 2001 HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS
DIN EN ISO 4413:2011-04 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
NFPA T3.19.7 : 1978 : R2007 CAVITY DIMENSIONS FOR FLUID POWER EXCLUSION DEVICES (INCH SERIES)
UNE-EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
DIN ISO 6022 E : 2008 HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
NFPA T3.21.8 : 2008 PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES
ISO 12669:2017 Hydraulic fluid power — Method for determining the required cleanliness level (RCL) of a system
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
NFPA T2.6.1 : 2001 : R2009 FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT
ISO 10770-2:2012 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves
ISO 3938:1986 Hydraulic fluid power — Contamination analysis — Method for reporting analysis data
NFPA T3.19.18 : 2009 FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS
SAE J 1298 :2010(S2017) CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC PORT SIZES AND LOCATIONS
SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
ISO 14743:2004 Pneumatic fluid power Push-in connectors for thermoplastic tubes
I.S. EN ISO 6149-1:2007 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS EN ISO 4414:2010 Pneumatic fluid power. General rules and safety requirements for systems and their components
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 7180:1986 Pneumatic fluid power Cylinders Bore and port thread sizes
ISO 15171-2:2016 Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure
ISO 21018-3:2008 Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique
NFPA T3.6.29 : 2000 : R2009 TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER
BS ISO 10100 : 2001 HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TESTS
ANSI B93.60M : 82(R1995) FLUID POWER SYSTEMS AND PRODUCTS - CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL PRESSURES,
ISO 15217:2000 Fluid power systems and components 16 mm square electrical connector with earth contact Characteristics and requirements
ISO 1219-2:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
ISO 1219-3:2016 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
NFPA T3.12.10 : 2000 : R2009 AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
ISO 6195:2013 Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 3: Storage, handling and installation
ISO 17165-1:2007 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Alternative test methods
BS ISO 3601-1:2012 Fluid power systems. O-rings Inside diameters, cross-sections, tolerances and designation codes
ISO 4404:1998 Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
ISO 21287:2004 Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
ISO 14617-10:2002 Graphical symbols for diagrams Part 10: Fluid power converters
NFPA T3.21.4 : 2000 : R2005 PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE
BIS IS 10187 : 2013 HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
ISO 16889:2008 Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
ISO 14541:2013 Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
SAE J 1779 : 2013 SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES
ISO 15086-3:2008 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
ISO 10372:1992 Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces
ISO 14617-4:2002 Graphical symbols for diagrams Part 4: Actuators and related devices
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN ISO 13849-2:2013-02 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method
BS ISO 27407:2010 Hydraulic fluid power. Marking of performance characteristics on hydraulic filters
PD ISO/TR 15640:2011 Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters
BS EN 13731:2007 Lifting bag systems for fire and rescue service use. Safety and peformance requirements
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
UNE-EN ISO 13849-2:2013 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS EN ISO 8434-4:2000 Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples
BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS ISO 12829:2016 Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Method for calculating steady-state flow-rate characteristics of systems
DIN ISO 12238:2005-12 Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
DIN EN 13731:2008-02 Lifting bag systems for fire and rescue service use - Safety and performance requirements
DIN ISO 4395:2011-05 Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009 + Cor. 1:2010)
DIN ISO 10763:2004-03 Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
DIN EN 982:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
DIN ISO 12151-2:2004-01 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24? cone connector ends with O-rings (ISO 12151-2:2003)
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN ISO 8434-1:2008-02 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN ISO 6022:2008-06 HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
DIN ISO 21287:2005-12 Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004)
ONORM EN ISO 1179-2 : 2014 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
DIN ISO 6149-2:1996-11 PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
08/30179131 DC : DRAFT SEP 2008 BS ISO 12500-4 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 4: WATER
09/30196753 DC : 0 BS ISO 10041-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES
I.S. EN ISO 8434-1:2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 7425-1:1988 Hydraulic fluid power Housings for elastomer-energized, plastic-faced seals Dimensions and tolerances Part 1: Piston seal housings
12/30260519 DC : 0 BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012)
BS ISO 10767-1:2015 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for determining source flow ripple and source impedance of pumps
04/30022943 DC : DRAFT NOV 2004 BS ISO 12500-2 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 2: OIL VAPOURS
DIN ISO 6149-1:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING
BS ISO 14085-4:2015 Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
BS ISO 6149-3:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements
ANSI B93.84M : 1987 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES,
ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
ISO 20155:2017 Ships and marine technology — Test method of flow induced in-pipe noise source characteristics for a ship-used pump
ISO 8573-8:2004 Compressed air — Part 8: Test methods for solid particle content by mass concentration
SAE J 2337-3 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
BS ISO 6020-1:2007 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series
07/30173477 DC : 0 BS ISO 4395 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS
00/707842 DC : DRAFT APR 2000 ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS
NFPA T2.13.7 : 1997 : R2009 HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI
BS ISO 6301-1:2017 Pneumatic fluid power. Compressed-air lubricators Main characteristics to be included in supplier\'s literature and product-marking requirements
07/30144370 DC : 0 BS ISO 3601-1 - FLUID POWER SYSTEMS - O-RINGS - PART 1: INSIDE DIAMETERS, CROSS-SECTIONS, TOLERANCES AND DESIGNATION CODES
16/30266482 DC : 0 BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM
BS ISO 8136:1986 Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium series. Port dimensions
04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
NF ISO 7241-2 : 2001 HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 2: TEST METHODS
BS 5540-8:1991 Evaluating particulate contamination of hydraulic fluids Method of determining the level of contamination (by the counting method using a microscope)
NF ISO 5599-1 : 2002 PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 1: MOUNTING INTERFACES WITHOUT ELECTRICAL CONNECTOR
NF ISO 16873 : 2012 HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
ISO 8135:1999 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Tolerances
BS ISO 8132:2014 Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
BS ISO 3601-5:2015 Fluid power systems. O-rings Specification of elastomeric materials for industrial applications
ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
ISO 4409:2007 Hydraulic fluid power Positive-displacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
BS ISO 15407-2:2003 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
ISO 10945:1994 Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports
01/714274 DC : 0 ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
16/30290140 DC : 0 BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS ISO 8573-9:2004 Compressed air Test methods for liquid water content
BS ISO 11727:1999 Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
ISO 8136:1986 Hydraulic fluid power Single rod cylinders, 160 bar (16 MPa) medium series Port dimensions
11/30182572 DC : 0 BS ISO 11011 - COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT
BS ISO 19973-2:2015 Pneumatic fluid power. Assessment of component reliability by testing Directional control valves
05/30135789 DC : DRAFT JUL 2005 EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS ISO 2941:2009 Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating
BS 7250:1989 Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
BS ISO 15086-2:2000 Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Measurement of speed of sound in a fluid in a pipe
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
BS ISO 8426:2008 Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
07/30158997 DC : 0 BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
DIN ISO 10100:2013-07 Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2001 + Amd.1:2012)
BS EN ISO 1179-1:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports
ISO 16908:2014 Hydraulic filter element test methods Thermal conditioning and cold start-up simulation
14/30287215 DC : 0 BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS
BS ISO 10041-1:2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves Main characteristics to include in the supplier\'s literature
07/30131653 DC : 0 BS ISO 6194-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY
14/30287198 DC : 0 BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE
PD ISO/TR 16194:2017 Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
BS ISO 12151-6:2009 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
08/30186852 DC : DRAFT JULY 2008 BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
07/30131661 DC : DRAFT DEC 2007 BS ISO 6194-3 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 3: STORAGE, HANDLING AND INSTALLATION
BS 7201-2:1995 Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports
BS ISO 1219-1 : 2012 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHICAL SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS
BS ISO 6149-4 : 2006 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
BS ISO 6020-2:2015 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series
BS ISO 8573-4:2001 Compressed air Test methods for solid particle content
NF ISO 15217 : 2002 FLUID POWER SYSTEMS AND COMPONENTS - 16 MM SQUARE ELECTRICAL CONNECTOR WITH EARTH CONTACT - CHARACTERISTICS AND REQUIREMENTS
BS ISO 6149-2:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
05/30135258 DC : DRAFT JUN 2005 ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E)
BS ISO 10767-3:1999 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors
ONORM EN ISO 8434-1 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
10/30204467 DC : 0 BS ISO 16589-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 2: VOCABULARY
BS ISO 20155:2017 Ships and marine technology. Test method of flow induced in-pipe noise source characteristics for a ship-used pump
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
06/30128838 DC : DRAFT MAR 2006 ISO 13726 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM - ACCESSORY MOUNTING DIMENSIONS
BS ISO 14085-5:2015 Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue
07/30144373 DC : 0 BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
ISO 15171-1:1999 Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure
UNI ISO 12151-6 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
NF ISO 8573-9 : 2004 COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT
ISO 6358-2:2013 Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods
NF ISO 8573-5 : 2003 COMPRESSED AIR - PART 5: TEST METHOD FOR OIL VAPOUR AND ORGANIC SOLVENT CONTENT
05/30135256 DC : DRAFT JUN 2005 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
BS EN ISO 11011:2015 Compressed air. Energy efficiency. Assessment
04/30116417 DC : DRAFT JUL 2004 ISO 8133 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES - ACCESSORY MOUNTING DIMENSIONS
NF ISO 12500-3 : 2009 FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
BS ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Storage, handling and installation
17/30366640 DC : 0 BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
BS ISO 14085-1:2015 Aerospace series. Hydraulic filter elements. Test methods Test sequence
07/30163202 DC : 0 BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
BS ISO 14617-9:2002 Graphical symbols for diagrams Pumps, compressors and fans
BS ISO 8573-8:2004 Compressed air Test methods for solid particle content by mass concentration
BS ISO 8138:1998 Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions
17/30327539 DC : 0 BS ISO 18582-2 - FLUID POWER - SPECIFICATIONS OF REFERENCE DICTIONARY - PART 2: CLASSES' AND PROPERTIES' DEFINITIONS FOR PNEUMATICS
DIN EN ISO 1179-1:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
ISO 12500-3:2009 Filters for compressed air Test methods Part 3: Particulates
14/30273508 DC : 0 BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE
06/30032027 DC : DRAFT MAY 2006 ISO 6194-5 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 5: IDENTIFICATION OF VISUAL IMPERFECTIONS
NFPA T2.13.5 : 1991 : R2012 HYDRAULIC FLUID POWER - INDUSTRIAL SYSTEMS - PRACTICE FOR THE USE OF HIGH WATER CONTENT FLUIDS
BS ISO 6020-3:2015 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm
ANSI B93.111M : 87(R1994) FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - HOUSING FOR ROD WIPER RINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES,
I.S. EN ISO 1179-4:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
08/30184322 DC : DRAFT JUNE 2008 BS ISO 8140 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD END CLEVIS
NFPA T3.21.3 : 2008 PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS
ANSI B93.105M : 1987 HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS 160 BAR (16 MPA) MEDIUM AND 250 BAR (25 MPA) SERIES - TOLERANCES,
NFPA T3.21.20 : 2007 PNEUMATIC FLUID POWER - ELECTRICAL CONNECTIONS FOR VALVE ISLANDS - CORRESPONDENCE BETWEEN SOLENOIDS AND ELECTRICAL CONNECTOR PINS AND SOCKETS
BS ISO 3019-2:2001 Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Metric series
BS 6494-6:1989 Hydraulic fluid power valve mounting surfaces Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves
BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
05/30125047 DC : DRAFT JAN 2005 ISO 19973-3 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 3: PISTON ROD CYLINDERS
09/30196683 DC : 0 BS ISO 10094-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
DIN EN ISO 4414:2011-04 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
DIN ISO 6195 E : 2009 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS ISO 16589-1 : 2011 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
ISO 16431:2012 Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems
SAE J 1235 : 2015 MEASURING AND REPORTING THE INTERNAL LEAKAGE OF A HYDRAULIC FLUID POWER VALVE
ISO 6022:2006 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
UNI ISO 12151-5 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS
NF ISO 16028 : 2001 AMD 1 2006 HYDRAULIC FLUID POWER - FLUSH-FACE TYPE, QUICK-ACTION COUPLINGS FOR USE AT PRESSURES OF 20 MPA (200 BAR) TO 31,5 MPA (315 BAR) - SPECIFICATIONS
ISO 14085-3:2015 Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity
ISO 16902-1:2003 Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
ANSI B93.94M : 1987 FLUID POWER SYSTEMS AND COMPONENTS - THREE-PIN ELECTRICAL PLUG CONNECTOR - CHARACTERISTICS AND REQUIREMENTS
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
BS ISO 8434-3:2005 Metallic tube connections for fluid power and general use O-ring face seal connectors
BS ISO 16889 : 2008 HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT
ISO 11170:2013 Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements
ISO 12151-5:2007 Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
BS ISO 12151-1 : 2010 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
I.S. EN ISO 1179-1:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013)
DIN ISO 1219-2:1996-11 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
ISO 2944:2000 Fluid power systems and components — Nominal pressures
PD ISO/TS 17165-2:2013 Hydraulic fluid power. Hose assemblies Practices for hydraulic hose assemblies
ISO 8138:1998 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Port dimensions
ISO 5599-1:2001 Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
ISO 3857-4:2012 Compressors, pneumatic tools and machines — Vocabulary — Part 4: Air treatment
ISO 3723:2015 Hydraulic fluid power Filter elements Method for end load test
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
ISO 14540:2013 Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
BS ISO 8133:2014 Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
SAE J 1502 : 2013 CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC
UNE-EN ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
ISO 6953-1:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
ANSI B93.107M : 1987
ANSI B93.17M : 79(R1994) MULTIPLE LIP PACKING SETS, METHODS FOR MEASURING STACK HEIGHTS,
UNI ISO 8434-2 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
NF ISO 4395 : 2009 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 20401:2017 Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
ISO/TR 17209:2013 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads
ISO/TS 16952-1:2006 Technical product documentation Reference designation system Part 1: General application rules
BS EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use 24 degree cone connectors
ISO 15218:2003 Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces
ISO 10771-1:2015 Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method
DIN EN ISO 12922:2013-04 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN ISO 19879 E : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 14359:2011-04 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN ISO 9974-1:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports
BS ISO 17082:2004 Pneumatic fluid power. Valves. Data to be included in supplier literature
UNE-EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
ISO 4404-1:2012 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids
BS EN ISO 13849-2:2012 Safety of machinery. Safety-related parts of control systems Validation
08/30170008 DC : DRAFT SEP 2008 BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS
UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
I.S. EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
I.S. EN ISO 4404-1:2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
DIN EN ISO 6149-1:2007-05 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN ISO 19879:2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
I.S. EN 14359:2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN 13204:2016 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
BS 6361:1988 Specification for three-pin plug connectors for electrically controlled fluid power equipment
BS 5540-2:1992 Evaluating particulate contamination of hydraulic fluids Method of calibrating liquid automatic particle-count instruments (using AC Fine Test Dust contaminant)
BS 5944-1:1992 Measurement of airborne noise from hydraulic fluid power systems and components Method of test for pumps
BS 5944-2:1992 Measurement of airborne noise from hydraulic fluid power systems and components Method of test for motors
BS 4832:1987 Specification for compatibility between elastomeric materials and hydraulic fluids
BS 4062-2:1990 Valves for hydraulic fluid power systems Methods for determining performance
07/30165998 DC : 0 BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS
BS ISO 21018-1:2008 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles
BS ISO 23309:2007 Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing
BS 7296-1:1990 Cavities for hydraulic fluid power cartridge valves Specification for two-port slip-in valves
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
NFPA T3.12.10 : 2000 : R2014 AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL
13/30294752 DC : 0 BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD
00/716535 DC : DRAFT NOV 2000 ISO/CD 20401 - FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
DIN ISO 7368:1994-02 HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
BS ISO 14617-10:2002 Graphical symbols for diagrams Fluid power converters
BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
SAE J 2658 : 2013 CARBON AND STEEL ALLOY TUBE CONDUCTOR ASSEMBLIES FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER METALLIC TUBE ASSEMBLIES
NF EN ISO 4414 : 2011 PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
16/30330392 DC : 0 BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM
13/30271041 DC : 0 BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE
BS ISO 16031-2:2003 Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes Standard tolerances for non-hydraulic systems
ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
09/30199060 DC : 0 BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
01/714275 DC : 0 ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
96/709826 DC : DRAFT JUL 1996 ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63
17/30359782 DC : 0 BS ISO 8140 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD-END CLEVISES
BS ISO 15407-1:2000 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector
ISO 12151-2:2003 Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
14/30304022 DC : 0 BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
BS ISO 7789:2007 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
ISO 7241:2014 Hydraulic fluid power — Dimensions and requirements of quick-action couplings
98/715115 DC : DRAFT SEP 1998 ISO/CD 6982 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS
DIN ISO 1219:1978-08 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS
DIN SPEC 1330 : 2013 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
98/706002 DC : DRAFT APR 1998 ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS)
13/30294749 DC : 0 BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES
BS 7198-1:1989 Hydraulic fluid power quick-action couplings. Specification for dimensions and performance
CEI EN 50353 : 2002 INSULATING OIL - DETERMINATION OF FIBRE CONTAMINATION BY THE COUNTING METHOD USING A MICROSCOPE
BS ISO 6431:1992 Pneumatic fluid power. Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm. Mounting dimensions
BS ISO 6605:2017 Hydraulic fluid power. Test methods for hoses and hose assemblies
11/30214548 DC : 0 BS ISO 11170 - HYDRAULIC FLUID POWER - SEQUENCE OF TESTS FOR VERIFYING PERFORMANCE CHARACTERISTICS OF FILTER ELEMENTS
PD ISO/TS 18409:2018 Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves
ISO 15086-1:2001 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 1: Introduction
BS ISO 19973-3:2015 Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod
BS ISO 14617-6:2002 Graphical symbols for diagrams Measurement and control functions
BS ISO 10094-2:2010 Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics to include in the supplier\'s literature
NFPA T3.5.26 : 2000 : R2009 HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE
UNI ISO 12151-3 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
13/30274177 DC : 0 BS ISO 10762 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES
ISO/TR 10771-2:2008 Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods
BS ISO 8573-5:2001 Compressed air Test methods for oil vapour and organic solvent content
ISO 8573-4:2001 Compressed air Part 4: Test methods for solid particle content
NF ISO 15171-1 : 2001 CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 1: COUPLING NOT FOR CONNECTION UNDER PRESSURE
14/30304019 DC : 0 BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring
PREN 14492-1 : DRAFT 2015 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
NFPA T3.4.7 : 2000 : R2014 ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR
10/30196881 DC : 0 BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
04/30077768 DC : DRAFT FEB 2004 ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
13/30294746 DC : 0 BS ISO 19973-1 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 1: GENERAL PROCEDURES
05/30098235 DC : 0 ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES
BS ISO 18869:2017 Hydraulic fluid power. Test methods for couplings actuated with or without tools
BS ISO 12500-3:2009 Filters for compressed air. Test methods Particulates
ISO/TR 16806:2003 Pneumatic fluid power Cylinders Load capacity of pneumatic slides and their presentation method
BS ISO 10041-2:2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature
PREN 13204 : DRAFT 2015 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
04/30124527 DC : DRAFT OCT 2004 ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
BS ISO 10771-1:2015 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Test method
BS ISO 12669:2017 Hydraulic fluid power. Method for determining the required cleanliness level (RCL) of a system
NFPA T3.6.31 : 2000 : R2014 TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER
BS ISO 6263:2013 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
PD ISO/TR 10949:2002 Hydraulic fluid power. Component cleanliness. Guidelines for achieving and controlling cleanliness of components from manufacture to installation
18/30358591 DC : 0 BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
BS 7796:1995 Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
DIN EN ISO 1179-2:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
16/30339102 DC : 0 BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS
BS ISO 7425-2:1989 Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Rod seal housings
BS ISO 16874:2004 Hydraulic fluid power. Identification of manifold assemblies and their components
16/30317112 DC : 0 BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW
NF EN ISO 19879 : 2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
BS ISO 1219-2:2012 Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams
BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies Dimensions and requirements
BS ISO 14617-3:2002 Graphical symbols for diagrams Connections and related devices
ISO 10946:1999 Hydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic ports
02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS ISO 14743:2004 Pneumatic fluid power. Push-in connectors for thermoplastic tubes
PD ISO/TS 16431:2002 Hydraulic fluid power. Assembled systems. Verification of cleanliness
BS ISO 19973-4:2014 Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators
BS ISO 8137:1986 Hydraulic fluid power. Single rod cylinders, 250 bar (25 MPa) series. Port dimensions
BS EN ISO 1179-2:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
09/30199057 DC : 0 BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
16/30273511 DC : 0 BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING
05/30135263 DC : DRAFT JUN 2005 ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
04/30108990 DC : DRAFT FEB 2004 ISO 17567 - AGRICULTURE AND FORESTRY TRACTORS AND IMPLEMENTS - HYDRAULIC POWER BEYOND
BS 7294:1990 Methods for determination of flow-rate characteristics of pneumatic fluid power components
BS ISO 4392-2:2002 Hydraulic fluid power. Determination of characteristics of motors Startability
BS ISO 4407:2002 Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope
BS ISO 4393:2015 Fluid power systems and components. Cylinders. Basic series of piston strokes
BS 7780-2:1994 Specification for rotary shaft lip type seals Vocabulary
BS ISO 6099:2009 Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
16/30329946 DC : 0 BS ISO 5782-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR FILTERS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIERS' LITERATURE AND PRODUCT MARKING REQUIREMENTS
UNI ISO 8434-6 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
BS ISO 6982:1992 Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions
14/30291030 DC : 0 BS ISO 6432 - PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 8 TO 25 MM - BASIC AND MOUNTING DIMENSIONS
BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
NFPA T2.12.11.1 : 2009 FLUID POWER SYSTEMS AND COMPONENTS - RELIABILITY ANALYSIS, FIELD DATA REPORTING FORMAT AND DATABASE COMPILATION
BS ISO 14085-2:2015 Aerospace series. Hydraulic filter elements. Test methods Conditioning
BS ISO 20401:2017 Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
BS ISO 15524:2011 Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 4397:2011 Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes
UNI EN ISO 1179-4 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS ISO 12151-3:2010 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
ISO 15407-2:2003 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
06/30127099 DC : DRAFT JUNE 2006 ISO 17165-1 - HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
NFPA T2.13.5 : 1991 : R2007 HYDRAULIC FLUID POWER - INDUSTRIAL SYSTEMS - PRACTICE FOR THE USE OF HIGH WATER CONTENT FLUIDS
ANSI B93.99M : 87(R2001) HYDRAULIC FLUID POWER - SERVOVALVES - TEST METHODS
BS ISO 3968:2017 Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow
BS 2917-1:1993 Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols
DIN ISO 4395 E : 2011 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS
DIN ISO 6195:2015-02 (Draft) FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
NFPA T3.21.18 : 1994 : R2015 PNEUMATIC FLUID POWER - RECOMMENDED PRACTICE FOR CALIBRATION AND USE OF FLOWMETERS
NFPA T3.21.18 : 1994 : R2010 PNEUMATIC FLUID POWER - RECOMMENDED PRACTICE FOR CALIBRATION AND USE OF FLOWMETERS
ONORM EN ISO 19879 : 2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
ISO 6358-1:2013 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
16/30335561 DC : DRAFT APR 2016 BS ISO 37102 - SUSTAINABLE DEVELOPMENT AND RESILIENCE OF COMMUNITIES - VOCABULARY
SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
BS ISO 7368:2016 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
ISO 4021:1992 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
ISO 4412-2:1991 Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
ISO 27407:2010 Hydraulic fluid power Marking of performance characteristics on hydraulic filters
NF ISO 6072 : 2012 RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
ISO 15524:2011 Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
ISO 4402:1991 Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant
ISO 6301-2:2006 Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature
NFPA T3.9.22 : 2000 : R2005 PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR
ISO 11500:2008 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
NFPA T3.20.8 : 2000 : R2014 QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
ISO 14617-2:2002 Graphical symbols for diagrams Part 2: Symbols having general application
ANSI B93.103M : 1987 HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - TOLERANCES,
DIN ISO 1219-1:2007-12 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHIC SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS
NFPA T3.20.8 : 2000 : R2006 QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING
ISO 19973-4:2014 Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators
ISO 16030:2001 Pneumatic fluid power — Connections — Ports and stud ends
NFPA T3.5.26 : 2000 : R2014 HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE
BS ISO 6301-2:1997 Pneumatic fluid power. Compressed air lubricators Test methods to determine the main characteristics to be included in supplier\'s literature
I.S. EN ISO 1179-2:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
PREN 14359 : DRAFT 2014 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
ISO 16031-1:2002 Aerospace fluid systems — O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes — Part 1: Close tolerances for hydraulic systems
BS ISO 10945:1994 Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
NFPA T3.21.4 : 2000 : R2014 PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE
UNI EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
BS ISO 18413:2015 Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting
SAE J 2613 : 2017 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
ISO 6020-1:2007 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
UNI EN ISO 1179-3 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
SAE J 1227 : 2013 ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS
BIS IS/ISO 6194-1 : 2007 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
ASTM D 7721 : 2017 : REDLINE Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
NF ISO/TS 16431 : 2002 XP HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - VERIFICATION OF CLEANLINESS
EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007)
EN ISO 8434-1:2007/AC:2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 21018-4:2016 Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique
ISO 15407-1:2000 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 6953-2:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
ISO 15552:2018 Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
ISO 6020-3:2015 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 12500-1:2007 Filters for compressed air Test methods Part 1: Oil aerosols
ISO 12151-6:2009 Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
ISO 6432:2015 Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm Basic and mounting dimensions
ISO 12151-4:2007 Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends
ISO 10767-3:1999 Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
ISO 4392-2:2002 Hydraulic fluid power Determination of characteristics of motors Part 2: Startability
ISO 7368:2016 Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures
ISO 16656:2016 Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting dimensions
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 8434-6:2009 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
ISO 23552-1:2007 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type
ISO 5781:2016 Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
ISO 6020-2:2015 Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact series
ISO 8139:2009 Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end spherical eyes
ISO 5782-2:1997 Pneumatic fluid power Compressed-air filters Part 2: Test methods to determine the main characteristics to be included in supplier's literature
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
BS EN ISO 9974-3:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B)
BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
DIN EN ISO 4404-1:2012-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
UNE-EN 13204:2017 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
DIN EN ISO 4404-1 E : 2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
UNI EN ISO 12922 : 2013 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
SAE J 2467 : 2020 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
UNI EN 983 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNI EN 982 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN ISO 4404-1 : 2013 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN ISO 13849-2 : 2013 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow
BS 6494-5:1989 Hydraulic fluid power valve mounting surfaces Specification for compensated flow-control valves
ISO 21018-1:2008 Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles
ISO 4395:2009 Fluid power systems and components Cylinder piston rod end types and dimensions
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO/TS 17165-2:2018 Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies
13/30274171 DC : 0 BS ISO 8132 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES
BS ISO 3601-4:2008 Fluid power systems. O-rings Anti-extrusion rings (back-up rings)
NF ISO 5597 : 2010 HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS
NF ISO 6194-1 : 2011 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
PD ISO/TR 16806:2003 Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method
NFPA T3.6.31 : 2000 : R2006 TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER
NFPA T3.20.8 : 2000 : R2009 QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING
11/30239328 DC : 0 BS ISO 14540 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT QUICK-ACTION COUPLINGS FOR USE AT A PRESSURE OF 72 MPA (720 BAR)
DD ISO/TS 16952-1:2007 Technical product documentation. Reference designation system General application rules
ISO 14617-8:2002 Graphical symbols for diagrams Part 8: Valves and dampers
BS EN ISO 1179-4:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B)
BS ISO 3019-1:2001 Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Inch series shown in metric units
14/30274168 DC : 0 BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM
SAE J 2337-2 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
ISO 10762:2015 Hydraulic fluid power Mounting dimensions for cylinders, 10 MPa (100 bar) series
BS ISO 8778:2003 Pneumatic fluid power. Standard reference atmosphere
10/30215350 DC : 0 BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
NF ISO 10041-1 : 2010 PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
PREN ISO 13849-2 : DRAFT 2010 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
05/30125041 DC : DRAFT JAN 2005 ISO 19973-1 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 1: GENERAL PRODUCTION CALCULATION METHOD
BS ISO 10094-1:2010 Pneumatic fluid power. Electro-pneumatic pressure control valves Main characteristics to include in the supplier\'s literature
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
08/30176283 DC : DRAFT JAN 2008 BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES
I.S. EN ISO 8434-4:2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
BS ISO 11171:2016 Hydraulic fluid power. Calibration of automatic particle counters for liquids
ISO 27996:2009 Aerospace fluid systems — Elastomer seals — Storage and shelf life
UNI ISO 4397 : 2012 FLUID POWER CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES
11/30239331 DC : 0 BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE
BS 5540-5:1987 Evaluating particulate contamination of hydraulic fluids Method of reporting contamination analysis data
04/30022935 DC : DRAFT NOV 2004 BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS
BS ISO 15519-1:2010 Specification for diagrams for process industry General rules
BS ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Vocabulary
UNI ISO 1219-1 : 1994 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - GRAPHIC SYMBOLS
13/30271032 DC : 0 BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING
00/707658 DC : DRAFT APR 2000 PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
NFPA T2.13.7 : 1997 : R2005 HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI
BS ISO 21018-3:2008 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique
04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS ISO 15171-1:1999 Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling not for connection under pressure
17/30325994 DC : 0 BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE
05/30128814 DC : DRAFT NOV 2005 ISO 19973-4 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 4: PRESSURE REGULATORS
BS ISO 21287:2004 Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 2942:2004 Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
BS ISO 6149-1:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing
04/30124525 DC : DRAFT OCT 2004 ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
ISO 16860:2005 Hydraulic fluid power — Filters — Test method for differential pressure devices
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
BS ISO 5782-1:2017 Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements
BS ISO 9974-4:2006 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs
09/30199077 DC : 0 BS ISO 4397 - FLUID POWER SYSTEMS AND COMPONENTS - CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES
BS ISO 12500-1:2007 Filters for compressed air. Test methods Oil aerosols
DIN ISO 16030:2007-05 PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
BS ISO 4395:2009 Fluid power systems and components. Cylinder piston rod end types and dimensions
BS ISO 7241:2014 Hydraulic fluid power. Dimensions and requirements of quick-action couplings
01/704567 DC : 0 ISO/DIS 16031-2 - AEROSPACE FLUID SYSTEMS - O-RINGS, INCH SERIES - INSIDE DIAMETERS AND CROSS-SECTIONS, TOLERANCES AND SIZE IDENTIFICATION CODES - PART 2: STANDARD TOLERANCES (FOR NON-HYDRAULIC SYSTEMS)
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
BS ISO 6432:2015 Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
08/30184317 DC : DRAFT JUNE 2008 BS ISO 8139 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD END SPHERICAL EYES
BS 7287:1990 Guide for the use of fire-resistant hydraulic fluids
BS ISO 16860:2005 Hydraulic fluid power. Filters. Test method for differential pressure devices
BS ISO 12238:2001 Pneumatic fluid power. Directional control valves. Measurement of shifting time
BS 5242-2:1983 Tubes for fluid power cylinder barrels Specification for non-ferrous metallic tubes with specially finished bores
17/30360001 DC : 0 BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE
98/715116 DC : DRAFT SEP 1998 ISO/CD 6981 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END PLAIN EYES - MOUNTING DIMENSIONS
ISO 6149-4:2017 Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
BS ISO 6953-2:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers
13/30252560 DC : 0 BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS
09/30207718 DC : 0 BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE
96/709929 DC : DRAFT JUL 1996 ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES
BS ISO 11500:2008 Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 8135:1999 Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances
00/704296 DC : DRAFT FEB 2000 ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS
00/704298 DC : DRAFT FEB 2000 ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
09/30196676 DC : DRAFT OCT 2009 BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
BS 7847:1996 Fluid power systems and components. Connectors and associated components. Nominal pressures
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
DIN ISO 8140:2011-01 Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2009)
05/30127096 DC : DRAFT FEB 2005 ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
00/715332 DC : DRAFT OCT 2000 ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
ISO 14085-6:2015 Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level
UNI ISO 17165-1 : 2012 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
BS ISO 7180:1986 Pneumatic fluid power. Cylinders. Bore and port thread sizes
11/30240403 DC : 0 BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES
02/710642 DC : DRAFT SEP 2002 BS ISO 2942 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT
PD ISO/TR 17209:2013 Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads
BS ISO 18582-1:2016 Fluid power. Specification of reference dictionary General overview on organization and structure
DIN ISO 3019-2:2004-02 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
NFPA T2.12.11.1 : 2009 : R2014 FLUID POWER SYSTEMS AND COMPONENTS - RELIABILITY ANALYSIS, FIELD DATA REPORTING FORMAT AND DATABASE COMPILATION
ISO/TS 11686:2017 Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing
ANSI B93.110M : 1987 PNEUMATIC FLUID POWER - CYLINDERS, 10 BAR (1 000 KPA) SERIES - ROD END CLEVIS - MOUNTING DIMENSIONS,
BS ISO 5599-1:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector
BS ISO 4404-1 : 2001 AMD 16690 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
02/707919 DC : DRAFT JUN 2002 BS ISO 8573-8 - COMPRESSED AIR - PART 8: TEST METHODS FOR SOLID PARTICLE CONTENT BY MASS CONCENTRATION
BS ISO 7181:1991 Hydraulic fluid power. Cylinders. Bore and rod area ratios
14/30274238 DC : 0 BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
97/712737 DC : DRAFT JUL 1997 ISO/CD 8434-5 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 5: TEST METHODS FOR THREADED HYDRAULIC FLUID POWER CONNECTIONS
09/30196686 DC : 0 BS ISO 10094-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
BS ISO 2944:2000 Fluid power systems and components. Nominal pressures
02/708160 DC : DRAFT JUN 2002 BS ISO 8573-9 - COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT
17/30317139 DC : 0 BS ISO 20155 - SHIPS AND MARINE TECHNOLOGY - TEST METHOD OF FLOW INDUCED IN-PIPE NOISE SOURCE CHARACTERISTICS FOR A SHIP-USED PUMP
DIN ISO 6020-1:2010-07 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007)
BS ISO 16031-1:2002 Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes Close tolerances for hydraulic systems
BS ISO 14617-4:2002 Graphical symbols for diagrams Actuators and related devices
DIN EN ISO 11011 E : 2015 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
BS ISO 6264:1998 Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
BS ISO 8573-6:2003 Compressed air Test methods for gaseous contaminant content
ISO 11171:2016 Hydraulic fluid power Calibration of automatic particle counters for liquids
BS ISO 3857-4:2012 Compressors, pneumatic tools and machines. Vocabulary Air treatment
10/30196081 DC : 0 BS ISO 4404-1 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 15086-2:2000 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe
99/704447 DC : DRAFT FEB 1999 ISO/CD 15552-2 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - PART 2: ACCESSORIES DIMENSIONS
07/30164305 DC : 0 BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
BS ISO 2943:1998 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
BS 6494-3:1989 Hydraulic fluid power valve mounting surfaces Specification for pressure-relief valves
NFPA T3.5.15M : 1986 : R2013 HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS
07/30162752 DC : 0 BS ISO 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
ANSI B93.109M : 1987 PNEUMATIC FLUID POWER - CYLINDERS 10 BAR (1 000 KPA) SERIES - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS,
BS ISO 8434-4 : 1995 AMD 11038 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
SAE J 1453/2 : 2015 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
ISO 8573-9:2004 Compressed air — Part 9: Test methods for liquid water content
NF ISO 10770-1 : 2009 HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES
BS ISO 6195:2013 Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
NF ISO 4413 : 1999 HYDRAULIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
07/30163925 DC : 0 BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
BS 7198-2:1989 Hydraulic fluid power quick-action couplings Methods of test
BS 7780-3:1994 Rotary shaft lip type seals. Storage, handling and installation
BS ISO 7241-2:2000 Hydraulic fluid power. Quick-action couplings Test methods
BS ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Identification of visual imperfections
DIN ISO 3601-1:2013-11 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012)
ISO 3320:2013 Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
NF ISO 10041-2 : 2010 PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
UNI ISO 4411 : 2012 HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
NF EN 50353 : 2003 INSULATING OIL - DETERMINATION OF FIBER CONTAMINATION BY THE COUNTING METHOD USING A MICROSCOPE
NFPA T3.19.12M : 1982 : R2007 HYDRAULIC FLUID POWER - RECIPROCATING DYNAMIC SEALING DEVICES IN LINEAR ACTUATORS - METHOD OF TESTING, MEASURING, AND REPORTING LEAKAGE
BS ISO 1219-3:2016 Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams
SAE J 747 : 2017 CONTROL VALVE TEST PROCEDURE
SAE J 2337-1 : 2014 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
ISO 5599-2:2001 Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
ISO 6099:2009 Fluid power systems and components Cylinders Identification code for mounting dimensions and mounting types
ISO 10041-2:2010 Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature
NFPA T3.29.2 : 2000 : R2014 PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH
ISO 7425-2:1989 Hydraulic fluid power Housings for elastomer-energized, plastic-faced seals Dimensions and tolerances Part 2: Rod seal housings
NF ISO 15407-1 : 2001 PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES, SIZES 18 MM AND 26 MM - PART 1: MOUNTING INTERFACE SURFACES WITHOUT ELECTRICAL CONNECTOR
NFPA T3.19.25 : 2004 INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES
ISO 8131:1992 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Tolerances
UNI ISO 8434-3 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
ISO 8426:2008 Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity
ISO 1219-1:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
ISO 19973-3:2015 Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
ISO 16874:2004 Hydraulic fluid power Identification of manifold assemblies and their components
ISO 3968:2017 Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow
NFPA T2.6.1 : 2001 : R2005 FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT
ISO 2942:2004 Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point
NFPA T3.10.5.1 : 2000 : R2005 HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR
ISO/TR 10686:2013 Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
NFPA T3.6.1 : 1984 FLUID POWER SYSTEMS AND PRODUCTS - CYLINDER BORES AND PISTON ROD DIAMETERS - INCH SERIES
NFPA T2.30.6 : 2002 : R2009 HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS
NFPA T3.4.7 : 2000 : R2009 ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR
NFPA T2.30.6 : 2002 : R2014 HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS
ISO 2941:2009 Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating
ISO 10041-1:2010 Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 1: Main characteristics to include in the supplier's literature
BS ISO 8140:2009 Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
I.S. EN ISO 11011:2015 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
I.S. EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
ISO 6981:1992 Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions
BS ISO 4409:2007 Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
UNE-EN ISO 1179-2:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
ANSI B93.1987M : 1987 PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS WITH DETACHABLE MOUNTINGS-10 BAR (1000KPA) SERIES - BORES FROM 32 TO 320MM - MOUNTING DIMENSIONS,
ANSI B93.106M : 1987 HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) MEDIUM SERIES - PORT DIMENSIONS,
SAE J 2312 : 2013 AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE
ISO 12151-1:2010 Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system
ISO 14085-1:2015 Aerospace series Hydraulic filter elements Test methods Part 1: Test sequence
ISO 16589-2:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary
ISO 4392-1:2002 Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
ISO 17559:2003 Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
ISO 3601-5:2015 Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications
ISO/TR 15640:2011 Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters
ISO 11158:2009 Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG
ISO 19973-2:2015 Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves
ISO 8573-3:1999 Compressed air Part 3: Test methods for measurement of humidity
ISO 18582-1:2016 Fluid power — Specification of reference dictionary — Part 1: General overview on organization and structure
ISO 19973-5:2015 Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
ISO 15519-1:2010 Specification for diagrams for process industry Part 1: General rules
ISO 23181:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 8573-5:2001 Compressed air — Part 5: Test methods for oil vapour and organic solvent content
ISO 7790:2013 Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions
ISO 6194-5:2008 Rotary-shaft lip-type seals incorporating elastomeric sealing elements — Part 5: Identification of visual imperfections
ISO 14617-3:2002 Graphical symbols for diagrams Part 3: Connections and related devices
ISO 14617-9:2002 Graphical symbols for diagrams Part 9: Pumps, compressors and fans
ISO 14617-6:2002 Graphical symbols for diagrams Part 6: Measurement and control functions
ISO 14085-5:2015 Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue
ISO 16028:1999 Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
ISO 4411:2008 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO 8778:2003 Pneumatic fluid power — Standard reference atmosphere
ISO 16873:2011 Hydraulic fluid power — Pressure switches — Mounting surfaces
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
UNE-EN ISO 12922:2013 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
ISO 9974-1:1996 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
BS EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
BS EN 14359:2017 Gas-loaded accumulators for fluid power applications
ISO 7241-2:2000 Hydraulic fluid power Quick-action couplings Part 2: Test methods
ISO 3019-1:2001 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units
ISO 10767-2:1999 Hydraulic fluid power Determination of pressure ripple levels generated in systems and components Part 2: Simplified method for pumps
ISO 4405:1991 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method
ISO 10100:2001 Hydraulic fluid power Cylinders Acceptance tests
BS EN 982 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
BS EN 13204 : 2004 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 9974-3:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
ISO 11011:2013 Compressed air — Energy efficiency — Assessment
I.S. EN ISO 12922:2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
ISO 6431:1992 Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm Mounting dimensions
ISO 7241-1:1987 Hydraulic fluid power Quick-action couplings Part 1: Dimensions and requirements
ISO 6547:1981 Hydraulic fluid power — Cylinders — Piston seal housings incorporating bearing rings — Dimensions and tolerances
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 5596:1999 Hydraulic fluid power Gas-loaded accumulators with separator Ranges of pressures and volumes and characteristic quantities
BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
ISO 10099:2001 Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
ISO 9974-2:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
ISO 6264:1998 Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
BS ISO 10767-2:1999 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
ISO 6149-2:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS ISO 3724:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
ISO 6150:1988 Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing
NFPA T3.6.8 : 2010 FLUID POWER SYSTEMS - CYLINDERS - DIMENSIONS FOR ACCESSORIES FOR CATALOGED SQUARE HEAD INDUSTRIAL TYPES
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
NFPA T3.6.37 : 2010 HYDRAULIC FLUID POWER - CYLINDERS - METHOD FOR DETERMINING THE BUCKLING LOAD
ISO 3322:1985 Fluid power systems and components — Cylinders — Nominal pressures
ISO 6358-3:2014 Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems
DIN ISO 3320:2016-01 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES (ISO 3320:2013)
ANSI B93.22M : 1987 HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY
EN 14359:2017 Gas-loaded accumulators for fluid power applications
BS 2917:1977 Specification for graphical symbols used on diagrams for fluid power systems and components
EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
EN ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013)
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN ISO 1179-4 : 2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN ISO 9974-1:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements
EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
DIN EN ISO 11011:2015-08 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
NFPA T3.12.10 : 2000 : R2005 AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL
BS ISO 10099:2001 Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
04/30098199 DC : DRAFT JUL 2004 ISO 6022 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
BS ISO 7745:2010 Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use
15/30321906 DC : 0 BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION
03/110806 DC : DRAFT JUNE 2003 BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
ISO/TR 10949:2002 Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation
BS ISO 12151-4:2007 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends
BS ISO 6953-3:2013 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Alternative test methods for measuring the flow-rate characteristics of pressure regulators
ISO 8625-1:2018 Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure
BS ISO 16030:2001 Pneumatic fluid power. Connections. Ports and stud ends
ISO 12500-2:2007 Filters for compressed air — Test methods — Part 2: Oil vapours
NF ISO 5599-2 : 2002 AMD 1 2004 PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 2: MOUNTING INTERFACE SURFACES WITH OPTIONAL ELECTRICAL CONNECTOR
NF ISO 2944 : 2000 FLUID POWER SYSTEMS AND COMPONENTS - NOMINAL PRESSURES
DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
BS ISO 13726:2008 Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions
05/30125044 DC : DRAFT JAN 2005 ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES
BS ISO 4411:2008 Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics
BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
BS ISO 6953-1:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to be included in literature from suppliers and product-marking requirements
DIN ISO 3019-1:2004-02 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
ISO 12238:2001 Pneumatic fluid power — Directional control valves — Measurement of shifting time
DIN EN ISO 1179-4:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
NFPA T3.6.29 : 2000 : R2006 TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER
NFPA T3.5.14 : 2009 : R2014 HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS
10/30194893 DC : 0 BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
NFPA T3.9.22 : 2000 : R2009 PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR
ISO 19973-1:2015 Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures
ANSI B93.108M : 1987 HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - PORT DIMENSIONS,
13/30271035 DC : 0 BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY
DIN EN ISO 8434-1 E : 2008 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
13/30250847 DC : 0 BS ISO 6953-1 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS AND PRODUCT-MARKING REQUIREMENTS
11/30237803 DC : 0 BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
NFPA T2.13.13 : 2002 : R2015 RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS
BS 5540-1:1978 Specification for evaluating particulate contamination of hydraulic fluids Qualifying and controlling of cleaning methods for sample containers
11/30232479 DC : 0 BS ISO 3857-4 - COMPRESSOR, PNEUMATIC TOOLS AND MACHINES - VOCABULARY - PART 4: AIR TREATMENT
14/30284271 DC : 0 BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
01/714273 DC : 0 ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
ISO 6953-3:2012 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
BS 6277:1982 Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters
99/704445 DC : DRAFT FEB 1999 ISO/CD 15552-1 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1 000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - PART 1: BASIC AND MOUNTING DIMENSIONS
ISO 8133:2014 Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
14/30291027 DC : 0 BS ISO 4393 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - BASIC SERIES OF PISTON STROKES
ISO 10767-1:2015 Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
06/30128779 DC : DRAFT AUG 2006 ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY
BS ISO 15171-2:2016 Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure
NFPA T3.29.2 : 2000 : R2009 PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH
09/30176303 DC : 0 BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS
BS ISO 12500-2:2007 Filters for compressed air. Test methods Oil vapours
BS ISO 14617-8:2002 Graphical symbols for diagrams Valves and dampers
13/30271029 DC : 0 BS ISO 14085-1 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 1: TEST SEQUENCE
05/30111949 DC : DRAFT JUL 2005 ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE
03/306594 DC : DRAFT APR 2003 BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
BS ISO 11943:1999 Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
16/30268528 DC : 0 BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS
BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components
BS ISO 27996:2009 Aerospace fluid systems. Elastomer seals. Storage and shelf life
BS ISO 4414:1998 Pneumatic fluid power. General rules relating to systems
07/30155311 DC : 0 BS ISO 27996 - AEROSPACE FLUID SYSTEMS - ELASTOMER SEALS - STORAGE AND SHELF LIFE
ANSI B93.80M : 1987 HYDRAULIC FLUID POWER FILTERS EVALUATION OF PRESSURE DROP VERSUS FLOW CHARACTERISTICS,
DIN ISO 3601-4:2010-08 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008)
BS ISO 19973-5:2015 Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
12/30260523 DC : 0 BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012)
98/717481 DC : DRAFT DEC 1998 ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT
11/30075025 DC : 0 ISO 21017 - HYDRAULIC FLUID POWER - CLEANLINESS OF PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVEL
DIN ISO 3724:1990-11 HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FLOW FATIGUE CHARACTERISTICS
DIN EN ISO 1179-3:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
05/30098254 DC : DRAFT JUL 2005 ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING
07/30163197 DC : 0 BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
DIN ISO 3601-3:2010-08 Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005)
BIS IS 13534 : 2013 HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
SAE J 1453/3 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS
BS ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Storage, handling and installation
PD ISO/TS 11686:2017 Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
BS ISO 16656:2004 Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions
ISO/TS 18409:2018 Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
NF ISO 12151-1 : 2010 AMD 1 2017 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
BS ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
NF ISO 12151-6 : 2009 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS
13/30274174 DC : 0 BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
04/30124528 DC : DRAFT OCT 2004 ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
16/30312462 DC : 0 BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES
13/30271044 DC : 0 BS ISO 14085-6 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 6: INITIAL CLEANLINESS LEVEL
NFPA T3.10.5.1 : 2000 : R2014 HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR
DIN ISO 8139:2011-01 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes (ISO 8139:2009)
07/30131694 DC : 0 BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
UNI EN ISO 19879 : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
BS ISO 6547:1981 Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
04/30098205 DC : DRAFT JUL 2004 ISO 8132 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, (16 MPA) 160 BAR MEDIUM AND 25 MPA (250 BAR) SERIES - MOUNTING DIMENSIONS FOR ACCESSORIES
SAE J 1926/3 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
NFPA T3.5.15M : 1986 HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS
BS ISO 15552:2004 Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions
BS ISO 4401:2005 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
08/30176290 DC : DRAFT JAN 2008 BS ISO 6358-4 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 4: CHARGE TEST AS AN ALTERNATE TEST METHOD
ISO 11943:1999 Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation
NFPA T3.5.15M : 1986 : R2008 HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS
BS ISO 23181:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
09/30199068 DC : 0 BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS
BS ISO 3723:2015 Hydraulic fluid power. Filter elements. Method for end load test
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
NFPA T3.10.5.1 : 2000 : R2009 HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR
BS ISO 16902-1:2003 Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method Pumps
BS ISO 4404:1998 Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
ISO 14085-2:2015 Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning
05/30135261 DC : DRAFT JUN 2005 ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
NFPA T2.13.13 : 2002 : R2010 RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS
06/30128759 DC : 0 BS ISO 15086-3 - HYDRAULIC FLUID POWER - DETERMINATION OF THE FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE
08/30171024 DC : DRAFT MAY 2008 BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES
BS ISO 16028:1999 Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
NF ISO 8434-6 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
SAE J 1926/1 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
ANSI B93.91M : 1987 HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS,
DIN ISO 10763 E : 2004 HYDRAULIC FLUID POWER - PLAIN-END, SEAMLESS AND WELDED PRECISION STEEL TUBES - DIMENSIONS AND NOMINAL WORKING PRESSURES
ISO 4399:1995 Fluid power systems and components Connectors and associated components Nominal pressures
UNI ISO 12151-4 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
NFPA T3.19.12M : 1982 : R2012 HYDRAULIC FLUID POWER - RECIPROCATING DYNAMIC SEALING DEVICES IN LINEAR ACTUATORS - METHOD OF TESTING, MEASURING, AND REPORTING LEAKAGE
NF ISO 16902-1 : 2004 HYDRAULIC FLUID POWER - TEST CODE FOR THE DETERMINATION OF SOUND POWER LEVELS USING SOUND INTENSITY TECHNIQUES: ENGINEERING METHOD - PART 1: PUMPS
DIN ISO 20401:2007-07 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005)
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
NF EN ISO 4413 : 2011 HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
DIN ISO 12151-2 E : 2004 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS
ISO 3722:1976 Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
ISO 12500-4:2009 Filters for compressed air Methods of test Part 4: Water
ISO 10770-3:2007 Hydraulic fluid power Electrically modulated hydraulic control valves Part 3: Test methods for pressure control valves
BS ISO 3601-3 : 2005 FLUID POWER SYSTEMS - O-RINGS - PART 3: QUALITY ACCEPTANCE CRITERIA
BS ISO 8139:2009 Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
ISO 17567:2005 Agricultural and forestry tractors and implements Hydraulic power beyond
ANSI B93.113M : 87(R1993) HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - DIMENSIONS & REQUIREMENTS
ISO 9974-4:2016 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 8140:2009 Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end clevises
ISO 12829:2016 Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
NF ISO 3019-2 : 2002 HYDRAULIC FLUID POWER - DIMENSIONS AND IDENTIFICATION CODE FOR MOUNTING FLANGES AND SHAFT ENDS OF DISPLACEMENT PUMPS AND MOTORS - PART 2: METRIC SERIES
NF ISO 11171 : 2011 HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS
I.S. EN ISO 1179-3:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
NF ISO 10094-1 : 2010 PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC PRESSURE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
NFPA T3.5.50 : 2009 : R2014 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
NFPA T3.6.31 : 2000 : R2009 TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER
NFPA T3.9.22 : 2000 : R2014 PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR
NFPA T3.4.7 : 2000 : R2005 ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR
NFPA T3.29.2 : 2000 : R2005 PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH
NFPA T3.5.50 : 2009 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
NFPA T3.6.29 : 2000 : R2014 TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER
NFPA T3.19.25 : 2004 : R2009 INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES
SAE J 533 : 2017 FLARES FOR TUBING
NFPA T3.5.14 : 2009 HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS
NFPA T3.19.18 : 2009 : R2014 FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS
NF ISO 10094-2 : 2010 PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
BS 7275-2:1990 Determination of hydraulic fluid power motor characteristics Method for startability
ISO 3019-2:2001 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series
UNI EN ISO 1179-1 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
NF ISO 17559 : 2004 HYDRAULIC FLUID POWER - ELECTRICALLY CONTROLLED HYDRAULIC PUMPS - TEST METHODS TO DETERMINE PERFORMANCE CHARACTERISTICS
UNI EN ISO 1179-2 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
NF ISO 12151-3 : 2010 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
NFPA T3.21.4 : 2000 : R2009 PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE
ISO 8132:2014 Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
ISO 5782-1:2017 Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 10770-1:2009 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves
BS ISO 21018-4:2016 Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique
ISO 18413:2015 Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting
ISO 6982:1992 Hydraulic fluid power Cylinders Rod end spherical eyes Mounting dimensions
ISO 10094-1:2010 Pneumatic fluid power Electro-pneumatic pressure control valves Part 1: Main characteristics to include in the supplier's literature
DIN EN ISO 19879:2011-01 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
ISO 10094-2:2010 Pneumatic fluid power Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary
ISO 8573-6:2003 Compressed air — Part 6: Test methods for gaseous contaminant content
ISO 14085-4:2015 Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating
ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
ISO 23309:2007 Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing
ISO 14617-5:2002 Graphical symbols for diagrams Part 5: Measurement and control devices
ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation
ISO 4412-1:1991 Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
ISO 8137:1986 Hydraulic fluid power Single rod cylinders, 250 bar (25 MPa) series Port dimensions
ISO/TR 17165-2:2006 Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies
ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
DIN EN ISO 6149-3:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN ISO 6149-2:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 13135-2:2011-07 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
DIN EN 14492-1:2015-05 (Draft) Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
ISO 17082:2004 Pneumatic fluid power — Valves — Data to be included in supplier literature
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
BS EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 9974-2:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E)
ISO 7181:1991 Hydraulic fluid power Cylinders Bore and rod area ratios
11/30254394 DC : 0 BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS - PART 3: METHOD FOR CALCULATING STEADY-STATE FLOW-RATE CHARACTERISTICS OF ASSEMBLIES
ISO 1179-4:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
BS EN ISO 4404-1:2012 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
BS EN ISO 19879:2010 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
ISO 2943:1998 Hydraulic fluid power Filter elements Verification of material compatibility with fluids
ISO 11727:1999 Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components
DIN EN 983:1996-09 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN ISO 12151-3:2012-08 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)
DIN ISO 15171-1:2004-05 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
DIN EN 983:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN EN 14359:2017-09 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
EN 50353:2001 Insulating oil - Determination of fibre contamination by the counting method using a microscope

IEC 60050-351:2013 International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
ISO 611:2003 Road vehicles Braking of automotive vehicles and their trailers Vocabulary
ISO 10241:1992 International terminology standards Preparation and layout
ISO 9245:1991 Earth-moving machinery Machine productivity Vocabulary, symbols and units
ISO 8625-2:1991 Aerospace Fluid systems Vocabulary Part 2: General terms and definitions relating to flow
ISO 8778:2003 Pneumatic fluid power — Standard reference atmosphere
ISO 3529-3:2014 Vacuum technology Vocabulary Part 3: Total and partial pressure vacuum gauges
ISO 1998-6:2000 Petroleum industry — Terminology — Part 6: Measurement
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 4391:1983 Hydraulic fluid power Pumps, motors and integral transmissions Parameter definitions and letter symbols
ISO 1219-2:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
ISO 1998-99:2000 Petroleum industry — Terminology — Part 99: General and index
ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
ISO 8625-1:1993 Aerospace Fluid systems Vocabulary Part 1: General terms and definitions related to pressure
ISO 1998-2:1998 Petroleum industry Terminology Part 2: Properties and tests
ISO 1998-1:1998 Petroleum industry Terminology Part 1: Raw materials and products
ISO 3857-2:1977 Compressors, pneumatic tools and machines — Vocabulary — Part 2: Compressors
ISO 1998-7:1998 Petroleum industry Terminology Part 7: Miscellaneous terms
ISO 3857-1:1977 Compressors, pneumatic tools and machines — Vocabulary — Part 1: General
ISO 3529-2:1981 Vacuum technology — Vocabulary — Part 2: Vacuum pumps and related terms
ISO 1219-1:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
ISO 3529-1:1981 Vacuum technology — Vocabulary — Part 1: General terms
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
ISO 16889:2008 Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
ISO 2944:2000 Fluid power systems and components — Nominal pressures
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
ISO 4006:1991 Measurement of fluid flow in closed conduits — Vocabulary and symbols
ISO 14050:2009 Environmental management Vocabulary
ISO 8625-3:1991 Aerospace Fluid systems Vocabulary Part 3: General terms and definitions relating to temperature

View more information
€206.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.