Skip to content
Please enter a keyword to search

  • ISO 6487:2015

    Current The latest, up-to-date edition.

    Road vehicles — Measurement techniques in impact tests — Instrumentation

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  24-07-2015

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 6487:2015 gives requirements and recommendations for measurement techniques involving the instrumentation used in impact tests carried out on road vehicles. Its requirements are aimed at facilitating comparisons between results obtained by different testing laboratories, while its recommendations will assist such laboratories in meeting those requirements. It is applicable to instrumentation including that used in the impact testing of vehicle subassemblies. It does not include optical methods which are the subject of ISO 8721.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 22/SC 36
    Development Note Supersedes ISO/DIS 6487. (07/2015)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 12353-2:2003 Road vehicles — Traffic accident analysis — Part 2: Guidelines for the use of impact severity measures
    PD CEN/TS 1317-8:2012 Road restraint systems Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
    05/30128086 DC : DRAFT JAN 2005 ISO/DIS 15830-2 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 2: MECHANICAL SUBSYSTEMS
    PD ISO/TR 12353-3:2013 Road vehicles. Traffic accident analysis Guidelines for the interpretation of recorded crash pulse data to determine impact severity
    ISO 17340:2014 Metallic materials Ductility testing High speed compression test for porous and cellular metals
    CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
    I.S. EN 1176-2:2017 PLAYGROUND EQUIPMENT AND SURFACING - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR SWINGS
    ISO 11096:2011 Road vehicles Pedestrian protection Impact test method for pedestrian thigh, leg and knee
    09/30204189 DC : 0 BS EN 1080 - IMPACT PROTECTION HELMETS FOR YOUNG CHILDREN
    10/30216633 DC : 0 BS EN 1621-1 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
    04/301211 DC : DRAFT JAN 2004 ISO 17373 - ROAD VEHICLES - SLED TEST PROCEDURE FOR EVALUATION OF CERVICAL SPINE INJURY RISK IN LOW-SPEED, REAR-END IMPACT
    BS PD ISO/TS 17242 : 2014 QUASI-STATIC CALIBRATION PROCEDURE FOR BELT FORCE TRANSDUCERS
    15/30319577 DC : 0 BS ISO 15501-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEMS - PART 2: TEST METHODS
    PREN 1317-2 : DRAFT 2007 ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS AND VEHICLE PARAPETS
    06/30146267 DC : DRAFT FEB 2006 ISO 11154 - ROAD VEHICLES - ROOF LOAD CARRIERS
    BS ISO 12353-1:2002 Road vehicles. Traffic accident analysis Vocabulary
    BS ISO 17340:2014 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
    05/30078964 DC : DRAFT JAN 2005 ISO 13232-4 - MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 4: VARIABLES TO BE MEASURED, INSTRUMENTATION AND MEASUREMENT PROCEDURES
    BS ISO 15829:2013 Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
    DD ISO/TS 15827:2007 Road vehicles. Test procedures. Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
    00/707764 DC : DRAFT APR 2000 ISO/CD 15829 - ROAD VEHICLES - DYNAMIC SIDE IMPACT CRASH TEST PROCEDURES FOR EVALUATING OCCUPANT INTERACTIONS WITH SIDE AIRBAGS FOR A POLE IMPACT SIMULATION
    03/319408 DC : DRAFT NOV 2003 BS EN 14809 - SURFACES FOR SPORTS AREAS - DETERMINATION OF VERTICAL DEFORMATION
    00/712168 DC : DRAFT SEP 2001 ISO/DIS 7862 PASSENGER CARS - SLED TEST PROCEDURE FOR EVALUATING RESTRAINT SYSTEMS IN SIMULATED FRONTAL COLLISIONS
    BS ISO 13216-1:1999 Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems Seat bight anchorages and attachments
    CSA Z611 : 2002 : INC : UPD 1 : 2003 : R2012 RIOT HELMETS AND FACESHIELD PROTECTION
    BS ISO 15830-2:2013 Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Mechanical subsystems
    PREN 12503-4 : DRAFT 2012 SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION
    I.S. EN ISO 10256-2:2018 PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 2: HEAD PROTECTION FOR SKATERS (ISO 10256-2:2016)
    ISO 3984:2004 Road vehicles Rear moving barrier impact test procedure
    BS ISO 16850 : 2007 ROAD VEHICLES - PEDESTRIAN PROTECTION - CHILD HEAD IMPACT TEST METHOD
    BS ISO 13232-3 : 2005 MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 3: MOTORCYCLIST ANTHROPOMETRIC IMPACT DUMMY
    BS ISO 13232-7 : 2005 MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 7: STANDARDIZED PROCEDURES FOR PERFORMING COMPUTER SIMULATIONS OF MOTORCYCLE IMPACT TESTS
    NF ISO 17373 : 2006 ROAD VEHICLES - SLED TEST PROCEDURE FOR EVALUATING OCCUPANT HEAD AND NECK INTERACTIONS WITH SEAT/HEAD RESTRAINT DESIGNS IN LOW-SPEED REAR-END IMPACT
    ISO 8721:2010 Road vehicles Measurement techniques in impact tests Optical instrumentation
    ISO/TR 14933:2012 Road vehicles Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags
    PD ISO/TS 13499:2014 Road vehicles. Multimedia data exchange format for impact tests
    17/30364350 DC : 0 BS EN 12767 - PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS AND TEST METHODS
    I.S. EN 1865-5:2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 5: STRETCHER SUPPORT
    DIN EN 13484:2012-05 Helmets for users of luges
    DIN EN 12492:2012-04 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 1078:2014-04 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
    DIN EN 1317-1:2011-01 Road restraint systems - Part 1: Terminology and general criteria for test methods
    DIN EN 1621-1:2013-03 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
    BS EN ISO 10256:2003 Head and face protection for use in ice hockey
    BS EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
    UNE-EN 1080:2013 Impact protection helmets for young children
    BS EN 1080:2013 Impact protection helmets for young children
    BS EN 13484:2012 Helmets for users of luges
    BS EN 966 : 2012 HELMETS FOR AIRBORNE SPORTS
    BS EN 12492:2012 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
    BS EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods
    EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates
    CEN/TS 16786:2018 Road restraint systems - Truck Mounted Attenuators - Performance classes, impact test acceptance criteria and test performance
    DIN EN 13781:2012-04 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
    EN 892:2012+A1:2016 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
    EN 1317-1:2010 Road restraint systems - Part 1: Terminology and general criteria for test methods
    CEN/TS 1317-8:2012 Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
    EN 13087-2:2012 Protective helmets - Test methods - Part 2: Shock absorption
    EN 1080:2013 Impact protection helmets for young children
    EN 12767:2007 Passive safety of support structures for road equipment - Requirements, classification and test methods
    EN 1317-2 : 1998 ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS INCLUDING VEHICLE PARAPETS
    ENV 1317-4:2001 Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
    DEFSTAN 23-6/3(2000) : 2000 GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
    12/30251312 DC : 0 BS ISO 15830-3 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 3: ELECTRONIC SUBSYSTEMS
    BS AU202(1985) : AMD 5716 SPECIFICATION FOR REARWARD-FACING RESTRAINING DEVICES FOR INFANTS FOR USE IN ROAD VEHICLES
    PREN 958 : DRAFT 2015 METHODSNEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    DEFSTAN 05-102/1(2006) : 2006 MILITARY AIRCREW HELMET IMPACT STANDARD (MAHIS)
    09/30196744 DC : DRAFT MAY 2009 BS ISO 10542-1 - TECHNICAL SYSTEMS AND AIDS FOR DISABLED OR HANDICAPPED PERSONS - WHEELCHAIR TIEDOWN AND OCCUPANT-RESTRAINT SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR ALL SYSTEMS
    PD ISO/TR 13330:2013 Road vehicles. Calculation processes for the neck injury criteria in rear impact
    11/30214864 DC : 0 BS ISO 3560 - ROAD VEHICLES - FRONTAL FIXED BARRIER OR POLE IMPACT TEST PROCEDURE
    ISO 12097-3:2002 Road vehicles Airbag components Part 3: Testing of inflator assemblies
    PREN 892 : DRAFT 2011 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
    BS ISO 11096:2011 Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
    ISO/TR 14645:2015 Road vehicles Test procedures for evaluating child restraint system interactions with deploying air bags
    BS AU 185:1983 Specification for seat belt booster cushions
    ISO/TS 15827:2007 Road vehicles Test procedures Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
    BS AU 202a:1985 Specification for rearward-facing restraining devices for infants for use in road vehicles
    00/707765 DC : DRAFT APR 2000 ISO/CD 3984 - ROAD VEHICLES - MOVING BARRIER RAR COLLISION METHOD
    BS ISO 10542-1:2012 Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems Requirements and test methods for all systems
    BS ISO 22488:2011 Ships and marine technology. Shipboard fire-fighters\' outfits (protective clothing, gloves, boots and helmet)
    05/30128090 DC : DRAFT JAN 2005 ISO/DIS 15830-3 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 3: ELECTRONIC SUBSYSTEMS
    07/30099526 DC : 0 EN 1317-2: ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS AND VEHICLE PARAPETS
    BS 5240-1:1987 Industrial safety helmets Specification for construction and performance
    PREN 1621-1 : DRAFT 2010 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
    EN 1176-2:2017 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
    BS EN 913:2008 Gymnastic equipment. General safety requirements and test methods
    UNE 135900:2017 Standard on the evaluation of performance of the protection systems for motorcyclists on safety barriers and parapets. Test procedures, performance classes and acceptance criteria.
    ISO 15830-3:2013 Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 3: Electronic subsystems
    ISO/TR 27957:2008 Road vehicles Temperature measurement in anthropomorphic test devices Definition of the temperature sensor locations
    I.S. EN 913:2008 GYMNASTICS EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    ISO 13216-1:1999 Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Seat bight anchorages and attachments
    ONORM EN 913 : 2009 GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    ISO/TR 12353-3:2013 Road vehicles — Traffic accident analysis — Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity
    ISO 10542-1:2012 Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems
    I.S. EN 12767:2007 PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS
    DIN EN 13087-2:2012-04 PROTECTIVE HELMETS - TEST METHODS - PART 2: SHOCK ABSORPTION
    DIN EN 1080:2013-05 IMPACT PROTECTION HELMETS FOR YOUNG CHILDREN
    DIN EN 12767:2008-01 PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS
    UNE-EN 958:2017 Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
    BS EN 1385:2012 Helmets for canoeing and white water sports
    BS EN 958:2017 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods
    BS EN 1317-3:2010 Road restraint systems Performance classes, impact test acceptance criteria and test methods for crash cushions
    I.S. EN 892:2012 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 1317-1:2010 ROAD RESTRAINT SYSTEMS - PART 1: TERMINOLOGY AND GENERAL CRITERIA FOR TEST METHODS
    I.S. EN 14572:2005 HIGH PERFORMANCE HELMETS FOR EQUESTRIAN ACTIVITIES
    I.S. EN 13087-2:2012 PROTECTIVE HELMETS - TEST METHODS - PART 2: SHOCK ABSORPTION
    I.S. EN 1078:2012 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
    I.S. EN 1317-2:2010 ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS INCLUDING VEHICLE PARAPETS
    I.S. EN 12492:2012 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 1317-3:2010 ROAD RESTRAINT SYSTEMS - PART 3: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR CRASH CUSHIONS
    I.S. EN 1621-1:2012 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
    I.S. EN 13781:2012 PROTECTIVE HELMETS FOR DRIVERS AND PASSENGERS OF SNOWMOBILES AND BOBSLEIGHS
    I.S. EN 966:2012 HELMETS FOR AIRBORNE SPORTS
    I.S. EN 1621-2:2014 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 2: MOTORCYCLISTS' BACK PROTECTORS - REQUIREMENTS AND TEST METHODS
    I.S. EN 1385:2012 HELMETS FOR CANOEING AND WHITE WATER SPORTS
    I.S. EN 13484:2012 HELMETS FOR USERS OF LUGES
    I.S. EN 1080:2013 IMPACT PROTECTION HELMETS FOR YOUNG CHILDREN
    I.S. EN 12503-4:2016 SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION
    I.S. EN 958:2017 MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 812:2012 INDUSTRIAL BUMP CAPS
    BS 4472:1988 Specification for protective skull caps for jockeys
    BS 3864:1989 Specification for protective helmets for firefighters
    BS 5993:1987 Specification for leather-covered cricket balls
    BS 5993:1994 Specification for cricket balls
    BS 6863:1987 Specification for pedal cyclists\' helmets
    12/30268675 DC : 0 BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    BS ISO 7862:2004 Road vehicles. Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
    07/30168434 DC : 0 BS EN 1317-3 - ROAD RESTRAINT SYSTEMS - PART 3: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR CRASH CUSHIONS
    11/30238111 DC : 0 BS 8563 - MOUTHGUARDS FOR USE IN SPORTS AND RECREATION - SAFETY REQUIREMENTS AND TEST METHODS
    ISO 13232-3:2005 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 3: Motorcyclist anthropometric impact dummy
    12/30251305 DC : 0 BS ISO 15830-1 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 1: TERMINOLOGY AND RATIONALE
    BS AU 183:1983 Specification for passive seat belt systems
    ISO/TR 12351:1999 Road vehicles Determination of head contact and duration in impact tests
    BS ISO 12353-2:2003 Road vehicles. Traffic accident analysis Guidelines for the use of impact severity measures
    BS 6863:1989 Specification for pedal cyclists\' helmets
    PD ISO/TR 14645:2015 Road vehicles. Test procedures for evaluating child restraint system interactions with deploying air bags
    05/30022153 DC : DRAFT JAN 2005 ISO 16850 - ROAD VEHICLES - PEDESTRIAN PROTECTION - CHILD HEAD IMPACT TEST METHOD
    ISO/TR 14646:2007 Road vehicles Side impact testing of child restraint systems Review of background data and test methods, and conclusions from the ISO work as of November 2005
    ISO 3560:2013 Road vehicles — Frontal fixed barrier or pole impact test procedure
    ISO 13232-4:2005 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 4: Variables to be measured, instrumentation and measurement procedures
    03/319407 DC : DRAFT NOV 2003 BS EN 14808 - SURFACES FOR SPORTS AREAS - DETERMINATION OF SHOCK ABSORPTION
    BS ISO 15830-1:2013 Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Terminology and rationale
    15/30296817 DC : 0 BS EN ISO 10256-2 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 2: HEAD PROTECTION FOR SKATERS
    DD ENV 1317-4:2002 Road restraint systems Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
    BS EN 1865-5:2012 Patient handling equipment used in road ambulances Stretcher support
    10/30231841 DC : 0 BS EN 1317-8 - ROAD RESTRAINT SYSTEMS - PART 8: MOTORCYCLE ROAD RESTRAINT SYSTEMS WHICH REDUCE THE IMPACT SEVERITY OF MOTORCYCLIST COLLISIONS WITH SAFETY BARRIERS
    06/19976237 DC : DRAFT MAY 2006
    05/30079046 DC : DRAFT JAN 2005 ISO 13232-7 - MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 7: STANDARDIZED PROCEDURES FOR PERFORMING COMPUTER SIMULATIONS OF MOTORCYCLE IMPACT TESTS
    PD ISO/TR 10982:2013 Road vehicles. Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
    09/30155228 DC : 0 BS ISO 15829 - ROAD VEHICLES - SIDE IMPACT TEST PROCEDURES FOR THE EVALUATION OF OCCUPANT INTERACTIONS WITH SIDE AIRBAGS BY POLE IMPACT SIMULATION
    BS ISO 3984:2004 Road vehicles. Rear moving barrier impact test procedure
    BS ISO 7176-19 : 2008 WHEELCHAIRS - PART 19: WHEELED MOBILITY DEVICES FOR USE AS SEATS IN MOTOR VEHICLES
    UNI EN 1865-5 : 2012 PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 5: STRETCHER SUPPORT
    ISO/TS 29062:2009 Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection
    CSA Z611 : 2002 RIOT HELMETS AND FACESHIELD PROTECTION
    BS ISO 13232-1 : 2005 MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 1: DEFINITIONS, SYMBOLS AND GENERAL CONSIDERATIONS
    SAE J 2937 : 2016 LINEAR IMPACT PROCEDURE FOR OCCUPANT EJECTION PROTECTION
    ISO 14513:2016 Road vehicles — Pedestrian protection — Head impact test method
    ISO 15830-2:2013 Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 2: Mechanical subsystems
    ISO 7862:2004 Road vehicles — Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
    UNI CEN/TS 1317-8 : 2012 ROAD RESTRAINT SYSTEMS - PART 8: MOTORCYCLE ROAD RESTRAINT SYSTEMS WHICH REDUCE THE IMPACT SEVERITY OF MOTORCYCLIST COLLISIONS WITH SAFETY BARRIERS
    PREN 1384 : DRAFT 2014 HELMETS FOR EQUESTRIAN ACTIVITIES
    PREN 12767 : DRAFT 2017 PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS AND TEST METHODS
    ISO 13232-1:2005 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 1: Definitions, symbols and general considerations
    ISO 1496-3:1995 Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk
    ISO 15828:2004 Road vehicles — Offset frontal impact test procedure
    ISO 15829:2013 Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
    DIN EN 1317-3:2011-01 Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
    DIN EN 1385:2012-04 HELMETS FOR CANOEING AND WHITE WATER SPORTS
    DIN EN 1317-2:2011-01 Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
    DIN EN 812:2012-04 INDUSTRIAL BUMP CAPS
    DIN EN 14808 E : 2006 SURFACES FOR SPORTS AREAS - DETERMINATION OF SHOCK ABSORPTION
    DIN EN 12503-4 E : 2016 SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION
    BS EN 1078 : 2012 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
    BS EN 14809:2005 Surfaces for sports areas. Determination of vertical deformation
    BS EN 1621-1:2012 Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' limb joint impact protectors. Requirements and test methods
    UNE-EN 1621-1:2013 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
    EN 913:2008 Gymnastic equipment - General safety requirements and test methods
    EN 967 : 1996 HEAD PROTECTORS FOR ICE HOCKEY PLAYERS
    UNI EN 1317-3 : 2010 ROAD RESTRAINT SYSTEMS - PART 3: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR CRASH CUSHIONS
    UNI EN 13484 : 2012 HELMETS FOR USERS OF LUGES
    UNI EN 1080 : 2013 IMPACT PROTECTION HELMETS FOR YOUNG CHILDREN
    UNI EN 1621-1 : 2013 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
    UNI EN 1317-2 : 2010 ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS INCLUDING VEHICLE PARAPETS
    UNI EN 13087-2 : 2012 PROTECTIVE HELMETS - TEST METHODS - PART 2: SHOCK ABSORPTION
    UNI EN 13781 : 2012 PROTECTIVE HELMETS FOR DRIVERS AND PASSENGERS OF SNOWMOBILES AND BOBSLEIGHS
    UNI EN 958 : 2011 MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    UNI EN 966 : 2013 HELMETS FOR AIRBORNE SPORTS
    UNI EN 1621-2 : 2014 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - MOTORCYCLISTS' BACK PROTECTORS - PART 2: REQUIREMENTS AND TEST METHODS
    UNI EN 1385 : 2012 HELMETS FOR CANOEING AND WHITE WATER SPORTS
    UNI EN 12492 : 2012 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
    UNI EN 1317-1 : 2010 ROAD RESTRAINT SYSTEMS - PART 1: TERMINOLOGY AND GENERAL CRITERIA FOR TEST METHODS
    UNI EN 812 : 2012 INDUSTRIAL BUMP CAPS
    UNI EN 1078 : 2013 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
    ISO 15501-2:2016 Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods
    05/30078961 DC : DRAFT JAN 2005 ISO 13232-3 - MOTORCYCLES - TEST AND ANALYSIS PROCEDURES FOR RESEARCH EVALUATION OF RIDER CRASH PROTECTIVE DEVICES FITTED TO MOTORCYCLES - PART 3: MOTORCYCLIST ANTHROPOMETRIC IMPACT DUMMY
    ISO 13232-7:2005 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
    BS 6658:1985 Specification for protective helmets for vehicle users
    BS ISO 17373:2005 Road vehicles. Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
    ISO/PAS 11154:2006 Road vehicles — Roof load carriers
    UNI EN 1177 : 2008 IMPACT ATTENUATING PLAYGROUND SURFACING - DETERMINATION OF CRITICAL FALL HEIGHT
    I.S. EN ISO 10256:2003 HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY
    12/30268678 DC : 0 BS EN 12503-4 - SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION
    PD ISO/TR 14933:2012 Road vehicles. Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags
    BS ISO 3560:2013 Road vehicles. Frontal fixed barrier or pole impact test procedure
    PD 6634-2:1999 Vehicle restraint systems Fundamentals of highway restraint systems
    00/712169 DC : DRAFT OCT 2001 ISO/DIS 15828 ROAD VEHICLES - OFFSET FRONTAL IMPACT TEST PROCEDURE
    11/30242690 DC : 0 BS EN 892 - MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
    00/707862 DC : DRAFT APR 2000 ISO/DIS 3560 - ROAD VEHICLES - FRONTAL FIXED BARRIER OR POLE IMPACT TEST PROCEDURE
    S.R. CEN/TS 16786:2018 ROAD RESTRAINT SYSTEMS - TRUCK MOUNTED ATTENUATORS - PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST PERFORMANCE
    PD ISO/TR 27957:2008 Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
    UNI/TR 11370 : 2010 ROAD SAFETY DEVICES FOR MOTORCYCLIST - PERFORMANCE CLASSES, TEST METHODS AND ACCEPTANCE CRITERIA
    BS ISO 12097-3:2002 Road vehicles. Airbag components Testing of inflator assemblies
    PREN 1080 : DRAFT 2009 IMPACT PROTECTION HELMETS FOR YOUNG CHILDREN
    02/704772 DC : DRAFT MAY 2002 PREN 892 - MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
    UNE-ISO 3984:2016 Road vehicles. Rear moving barrier impact test procedure
    BS ISO 15828:2004 Road vehicles. Offset frontal impact test procedure
    14/30290405 DC : 0 BS EN 1384 - HELMETS FOR EQUESTRIAN ACTIVITIES
    XP S54 215 : 2010 XP PLAYGROUND SURFACING - HIC (HEAD INJURY CRITERION) TEST APPARATUS VALIDATION AND MONITORING METHOD
    BS 6473:1984 Specification for protective hats for horse and pony riders
    SAE J ISO 10997 : MAR 97 FULL-SCALE SIDE IMPACT TEST PROCEDURE
    ISO 22488:2011 Ships and marine technology — Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)
    S.R. CEN/TS 1317-8:2012 ROAD RESTRAINT SYSTEMS - PART 8: MOTORCYCLE ROAD RESTRAINT SYSTEMS WHICH REDUCE THE IMPACT SEVERITY OF MOTORCYCLIST COLLISIONS WITH SAFETY BARRIERS
    ISO 17373:2005 Road vehicles Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
    13/30286641 DC : 0 BS EN 12767 - PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS AND TEST METHODS
    ISO 15830-1:2013 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale
    UNI EN 913 : 2009 GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    ISO/TS 13499:2014 Road vehicles Multimedia data exchange format for impact tests
    ISO/TR 10982:2013 Road vehicles Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
    ISO 12097-2:1996 Road vehicles — Airbag components — Part 2: Testing of airbag modules
    DIN EN 966:2013-11 HELMETS FOR AIRBORNE SPORTS
    DIN EN 958:2015-07 (Draft) MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 13087-2:2012 Protective helmets. Test methods Shock absorption
    BS EN 1621-2:2003 Motorcyclists\' protective clothing against mechanical impact Motorcyclists back protectors. Requirements and test methods
    DIN EN 12503-4:2016-09 SPORTS MATS - PART 4: DETERMINATION OF SHOCK ABSORPTION
    UNE-EN 1176-2:2009 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
    UNE-EN 1317-2:2011 Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
    DIN EN 14808:2006-03 Surfaces for sports areas - Determination of shock absorption
    UNE-EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
    BS EN 892 : 2012 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 12503-4:2013 Sports mats Determination of shock absorption
    ISO 10256:2003 Head and face protection for use in ice hockey
    DIN EN 14809:2006-03 Surfaces for sports areas - Determination of vertical deformation
    UNE-EN 1385:2012 Helmets for canoeing and white water sports
    UNE-EN 892:2013 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
    BS EN 14572:2005 High performance helmets for equestrian activities
    UNE-EN 12503-4:2017 Sports mats - Part 4: Determination of shock absorption
    UNE-EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
    BS EN 967:1997 Head protectors for ice hockey players
    BS EN 14808:2005 Surfaces for sports areas. Determination of shock absorption
    BS EN 1317-1:2010 Road restraint systems Terminology and general criteria for test methods
    UNE-EN 12492:2012 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
    EN 14809:2005/AC:2007 SURFACES FOR SPORTS AREAS - DETERMINATION OF VERTICAL DEFORMATION
    EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003)
    EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
    EN 1865-5:2012 Patient handling equipment used in road ambulances - Part 5: Stretcher support
    EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
    EN 14808:2005 Surfaces for sports areas - Determination of shock absorption
    EN 14572:2005 High Performance Helmets for Equestrian Activities
    EN 958:2017 Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
    EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
    EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
    EN 966:2012+A1:2012 Helmets for airborne sports
    EN 1385:2012 Helmets for canoeing and white water sports
    EN 812:2012 Industrial bump caps
    BS ISO 14513:2016 Road vehicles. Pedestrian protection. Head impact test method
    ISO 16850:2007 Road vehicles — Pedestrian protection — Child head impact test method
    BS ISO 15501-2:2016 Road vehicles. Compressed natural gas (CNG) fuel systems Test methods
    BS ISO 15830-3:2013 Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Electronic subsystems
    DD ISO/PAS 11154:2006 Road vehicles. Roof load carriers
    ISO 10256-2:2016 Protective equipment for use in ice hockey Part 2: Head protection for skaters
    ISO 12353-1:2002 Road vehicles Traffic accident analysis Part 1: Vocabulary
    07/30099521 DC : 0 BS EN 1317-1 - ROAD RESTRAINT SYSTEMS - PART 1: TERMINOLOGY AND GENERAL CRITERIA FOR TEST METHODS
    ISO/TR 13330:2013 Road vehicles Calculation processes for the neck injury criteria in rear impact
    BS PAS 015(1999) : 1999 HELMETS FOR EQUESTRIAN USE
    12/30251309 DC : 0 BS ISO 15830-2 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 2: MECHANICAL SUBSYSTEMS
    15/30322058 DC : 0 BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 1865-5:2012-09 Patient handling equipment used in road ambulances - Part 5: Stretcher support
    12/30254325 DC : 0 BS ISO 17340 - METALLIC MATERIALS - DUCTILITY TESTING - HIGH SPEED COMPRESSION TEST FOR POROUS AND CELLULAR METALS
    BS ISO 13232-4:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Variables to be measured, instrumentation and measurement procedures
    CSA Z262.1 : 2015 ICE HOCKEY HELMETS
    CSA Z611 : 2002 : R2012 RIOT HELMETS AND FACESHIELD PROTECTION
    BS ISO 1496-3:1995 Series 1 Freight containers. Specification and testing Tank containers for liquids, gases and pressurized dry bulk
    15/30329413 DC : 0 BS EN 1621-3 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 3: REQUIREMENTS AND TEST METHODS FOR CHEST PROTECTORS
    EN ISO 10256-2:2018 Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO 10256-2:2016)
    ISO/TS 17242:2014 Quasi-static calibration procedure for belt force transducers
    NF EN 12767 : 2011 PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS
    DIN EN ISO 10256:2004-02 Head and face protection for use in ice hockey (ISO 10256:2003)
    DIN EN 14809 E : 2006 SURFACES FOR SPORTS AREAS - DETERMINATION OF VERTICAL DEFORMATION
    BS EN 12767:2007 Passive safety of support structures for road equipment. Requirements, classification and test methods
    BS EN 1317-2:2010 Road restraint systems Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
    UNE-EN 1317-3:2011 Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
    UNE-EN 1317-1:2011 Road restraint systems - Part 1: Terminology and general criteria for test methods
    BS EN 812:2012 Industrial bump caps
    EN 13484:2012 Helmets for users of luges
    EN 12492:2012 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
    DIN EN 14021:2004-03 Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
    EN 12503-4:2016 Sports mats - Part 4: Determination of shock absorption
    DIN EN 14572:2005-07 HIGH PERFORMANCE HELMETS FOR EQUESTRIAN ACTIVITIES
    DIN EN 913:2009-01 GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    EN 1317-3:2010 Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 879 : 2012 : REDLINE Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
    ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
    ISA MC96.1 : 1982 TEMPERATURE MEASUREMENT THERMOCOUPLES
    ISO 3784:1976 Road vehicles — Measurement of impact velocity in collision tests
    SAE J 211-1 : 2014 INSTRUMENTATION FOR IMPACT TEST - PART 1 - ELECTRONIC INSTRUMENTATION
    ISO/TR 27957:2008 Road vehicles Temperature measurement in anthropomorphic test devices Definition of the temperature sensor locations
    IEC 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
    ISO 8721:2010 Road vehicles Measurement techniques in impact tests Optical instrumentation
    ASTM E 1137 : 1997 Standard Specification for Industrial Platinum Resistance Thermometers
    ISO 4130:1978 Road vehicles — Three-dimensional reference system and fiducial marks — Definitions
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective