I.S. EN 4700-007:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
NF EN ISO 9015-1 : 2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
03/108761 DC : DRAFT MAY 2003
|
EN ISO 10477 - DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
DIN EN ISO 6506-2:2016-04 (Draft)
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
DIN EN ISO 15156-3:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
BS EN 4700-001:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
BS EN 4677-001:2012
|
Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality of welded assemblies |
BS ISO 8535-1:2016
|
Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
11/30216118 DC : 0
|
BS EN ISO 1797-3 - DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
UNE-EN ISO 12670:2016
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
DIN EN ISO 21672-1:2012-07
|
Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
BS 6516-1:1984
|
Solderless connections Solderless wrapped connections. General requirements, test methods and practical guidance. |
ISO 9652-4:2000
|
Masonry Part 4: Test methods |
04/30098257 DC : DRAFT MAY 2004
|
EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
UNI EN 4677-001 : 2013
|
AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
14/30261090 DC : 0
|
BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION |
BS 2782-7:Method 722B:1996
|
Methods of testing plastics. Rheological properties Determination of the fluidity of plastics using capillary and slit-die rheometers |
DIN ISO 22826:2008-08
|
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
BS ISO 16877:2015
|
Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH |
UNE-EN ISO 5182:2017
|
Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
17/30357660 DC : DRAFT AUG 2017
|
BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
API 11D3 :2008
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
UNI EN 14587-3 : 2012
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
UNI EN ISO 12690 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
DIN EN ISO 9015-2:2016-10
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
DIN EN ISO 1797:2016-05 (Draft)
|
DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
13/30290101 DC : 0
|
BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
I.S. EN ISO 16744:2004
|
DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
13/30263803 DC : 0
|
BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
OIML G 4 : 1984
|
HARDNESS TEST BLOCKS AND INDENTERS |
DIN ISO 13411:1996-12 (Draft)
|
AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
I.S. EN 14587-3:2012
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
BS 7814:1995
|
Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
DIN EN 12449:2015-11 (Draft)
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
16/30327067 DC : 0
|
BS EN ISO 3887 - STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
BS EN ISO 14998:2013
|
Petroleum and natural gas industries. Downhole equipment. Completion accessories |
00/709299 DC : DRAFT JUNE 2000
|
ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
BS EN ISO 21672-1:2012
|
Dentistry. Periodontal probes General requirements |
BS ISO 7689:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
BS 3900-E12:1986
|
Methods of test for paints Indentation test (spherical or pyramidal) |
ISO 6208:1992
|
Nickel and nickel alloy plate, sheet and strip |
UNI EN 4700-006 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
DIN 17751:2002-09
|
TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
01/714323 DC : DRAFT OCT 2001
|
EN ISO 15156-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS |
BS ISO 11443:2014
|
Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers |
NF EN ISO 1133-1 : 2012
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
XP PREN 3299 : 1997 XP
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
BS ISO 17804:2005
|
Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
BIS IS 1500-2 : 2013
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
08/30190326 DC : DRAFT DEC 2008
|
BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
17/30315891 DC : 0
|
BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
16/30297742 DC : DRAFT JUNE 2016
|
BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR |
10/30197302 DC : 0
|
BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
DIN 6773:2001-04
|
HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
16/30319126 DC : 0
|
BS ISO 20267 - THERMAL SPRAYING - DETERMINATION OF INTERFACIAL TOUGHNESS OF CERAMIC COATINGS BY INDENTATION |
PD ISO/TR 10809-1:2009
|
Cast irons Materials and properties for design |
04/30074927 DC : DRAFT JUN 2004
|
EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
UNI EN 13600 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
02/711556 DC : 0
|
LINKS FOR USE WITH STEEL CHAINS OF GRADE 8 |
BS ISO 8535-2:2003
|
Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
UNE-EN ISO 19490:2018
|
Dentistry - Sinus membrane elevator (ISO 19490:2017) |
12/30258463 DC : 0
|
BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
BS EN 4700-005:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
BS EN ISO 12670:2015
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
06/30151815 DC : 0
|
BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
DIN EN 15551 E : 2011
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
16/30302541 DC : 0
|
BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET |
15/30314608 DC : 0
|
BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
15/30293878 DC : 0
|
BS ISO 19207 - THERMAL SPRAYING - CLASSIFICATION METHOD OF ADHESIVE STRENGTH BY INDENTATION |
12/30258615 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
I.S. EN ISO 898-2:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
13/30261096 DC : 0
|
BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
API 14L : 2007 : R2012
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
06/30143946 DC : 0
|
EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 15594:2009
|
Railway applications. Track. Restoration of rails by electric arc welding |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
04/30095196 DC : DRAFT MAY 2004
|
EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
ISO 15590-2:2003
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
05/30128668 DC : DRAFT FEB 2005
|
ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
API 11D3 : 2008 : R2015
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
UNE-EN 14587-3:2013
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
UNI EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
BS 6828-1:1987
|
Dental rotary instruments Specification for shanks |
04/30116297 DC : DRAFT JUL 2004
|
ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS |
UNI EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
ISO 3887:2017
|
Steels — Determination of the depth of decarburization |
I.S. EN ISO 17945:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
I.S. EN 16602-70-46:2014
|
SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
PREN 2646 : 200P3
|
AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
DIN EN ISO 14917:2015-09 (Draft)
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
PREN 10208-3 : DRAFT 1997
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
PREN 3299 : 200P1
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
ISO 20267:2017
|
Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation |
PREN 3908 : 200P2
|
AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
ISO 15787:2016
|
Technical product documentation Heat-treated ferrous parts Presentation and indications |
I.S. EN 16771:2016
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
ONORM EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO/TR 15461:1997
|
Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
I.S. EN ISO 21672-1:2012
|
DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS (ISO 21672-1:2012) |
I.S. EN 16725:2016
|
RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
I.S. EN ISO 1797:2017
|
DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
I.S. EN ISO 18556:2016
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
PREN 1015-11 : DRAFT 2017
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
ISO 10477:2004
|
Dentistry Polymer-based crown and bridge materials |
UNE-EN ISO 16635-2:2015
|
Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
ISO 5857:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification |
18/30365854 DC : 0
|
BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
ISO 8642:2008
|
Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
I.S. EN ISO 1797-3:2013
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
UNI EN 14399-9 : 2009
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
ASTM F 3213 : 2017
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
UNE-EN ISO 16859-2:2016
|
Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
BIS IS 15311-1 : 2003 AMD 1
|
DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
EN 10132-1:2000
|
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
ISO 22826:2005
|
Destructive tests on welds in metallic materials Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
ISO 22394:2010
|
Hardmetals Knoop hardness test |
UNE-EN ISO 6506-2:2015
|
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
I.S. EN ISO 16859-2:2015
|
METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
NF EN 3299 : A2007
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
API 14L CHINESE : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
EN ISO 80079-36:2016
|
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
I.S. EN 12390-4:2000
|
TESTING HARDENED CONCRETE - PART 4: COMPRESSIVE STRENGTH - SPECIFICATION FOR TESTING MACHINES |
DIN EN 13605:2013-09
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
DIN EN 13599:2014-12
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN ISO 5470-1:2015-04 (Draft)
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
DIN EN ISO 6508-2:2015-06
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
DIN EN ISO 10673:2009-10
|
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
DIN EN ISO 10669:1999-11
|
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
DIN EN 586-2:1994-11
|
ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
DIN EN 13604:2013-09
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
UNE-EN ISO 8752:2010
|
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
BS EN ISO 13628-2:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
BS EN ISO 15098-1:2001
|
Dental tweezers General requirements |
BS EN 13600:2013
|
Copper and copper alloys. Seamless copper tubes for electrical purposes |
BS EN ISO 14310:2008
|
Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
BS EN ISO 7085:1999
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
BS EN 1301-1:2008
|
Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
UNE-EN ISO 898-1:2015
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
BS EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
BS EN ISO 7089:2000
|
Plain washers. Normal series. Product grade A |
BS EN ISO 10673:2009
|
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A |
BS EN 10328:2005
|
Iron and steel. Determination of the conventional depth and hardening after surface heating |
BS EN ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings |
BS EN 586-2:1994
|
Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
BS EN ISO 10669:1999
|
Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A |
BS EN 13348:2016
|
Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
BS EN ISO 7153-1:2016
|
Surgical instruments. Materials Metals |
BS EN ISO 3506-4:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
BS EN ISO 7091:2000
|
Plain washers. Normal series. Product grade C |
UNE-EN 12513:2011
|
Founding - Abrasion resistant cast irons |
BS EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
BS EN 14730-1:2017
|
Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
BS EN 24498-1:1993
|
Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness |
BS EN 14616:2004
|
Thermal spraying. Recommendations for thermal spraying |
ISO 7085:1999
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
BS EN ISO 8750:2007
|
Spring-type straight pins. Coiled, standard duty |
BS EN ISO 8752:2009
|
Spring-type straight pins. Slotted, heavy duty |
I.S. EN 13601:2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
I.S. EN ISO 3506-4:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
DIN EN 20898-2:1994-02
|
MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES |
I.S. EN 13148:2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
I.S. EN ISO 8748:2007
|
SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
EN 1043-1:1995
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
EN 50109-2-3:1995
|
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 12805:2002
|
Automotive LPG components - Containers |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 12166:2016
|
Copper and copper alloys - Wire for general purposes |
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings |
EN ISO 6508-2:2015
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
EN 10109-2 : 1994
|
METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
DIN EN ISO 15732:2005-09
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
DIN EN 14616:2005-02
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
EN 12390-4:2000
|
Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
DIN EN 657:2005-06
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
EN 10003-2 : 1994
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
EN 12797:2000/A1:2003
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
DIN ISO 4498:2005-11
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
EN 1337-2:2004
|
Structural bearings - Part 2: Sliding elements |
EN 12735-2:2016
|
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
DIN EN ISO 8750:2007-07
|
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
DIN EN ISO 5470-1:2017-04
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
EN 13348:2016
|
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
EN 10109-3 : 1994
|
METALLIC MATERIALS - HARDNESS OF TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
EN 12513:2011
|
Founding - Abrasion resistant cast irons |
EN 12451:2012
|
Copper and copper alloys - Seamless, round tubes for heat exchangers |
DIN EN 15551:2011-01
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
DIN EN ISO 15087-1:2002-03
|
DENTAL ELEVATORS - PART 1: GENERAL REQUIREMENTS |
ONORM EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
ONORM EN ISO 2702 : 2011
|
HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
ISO 13411:1997
|
Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
EN 13600:2013
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
UNI EN ISO 16635-2 : 2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS |
BS EN ISO 16635-2:2014
|
Dentistry. Dental rubber dam instruments Clamp forceps |
10/30165716 DC : 0
|
BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
DIN 13906-1:1990-07
|
DENTISTRY - DENTAL CASTING GOLD ALLOYS |
DIN EN 60352-1:1998-04
|
SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
07/30139530 DC : 0
|
BS ISO 8752 - SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
BS EN 16273:2014
|
Railway applications. Track. Forged rail transitions |
DIN EN ISO 19715 E : 2017
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
05/30136295 DC : DRAFT JUL 2005
|
ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS |
14/30268499 DC : 0
|
BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
DIN EN ISO 16635-1 E : 2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
16/30290358 DC : 0
|
BS EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
DIN EN ISO 1133-1:2012-03
|
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
BS EN 4700-006:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
14/30285793 DC : 0
|
BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
I.S. EN 657:2005
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
ISO 17918:2015
|
Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
BS EN ISO 17509:2016
|
Dentistry. Torque transmitter for handpieces |
DIN EN ISO 22068 E : 2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
DIN EN 16273:2015-03
|
Railway applications - Track - Forged rail transitions |
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
BS ISO 7492 : 1997 AMD 10134
|
DENTAL EXPLORERS |
I.S. EN 1043-1:1996
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
PREN 14587-1 : DRAFT 2017
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
BS ISO 22394:2010
|
Hardmetals. Knoop hardness test |
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
15/30278527 DC : 0
|
BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS |
DIN EN 16451:2015-09
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
I.S. EN 15311:2007
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
I.S. EN ISO 14917:2017
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
BS EN ISO 19490:2017
|
Dentistry. Sinus membrane elevator |
BS ISO 15341:2014
|
Graphic technology. Method for radius determination of printing cylinders |
ISO 2853:1993
|
Stainless steel threaded couplings for the food industry |
11/30238890 DC : 0
|
BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
BS ISO 22068 : 2012
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
DIN EN 14587-3:2013-01
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
DIN EN ISO 9873:2016-03 (Draft)
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
17/30352980 DC : 0
|
BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
BS EN ISO 19715:2017
|
Dentistry. Filling instrument with contra angle |
BS ISO 19207:2016
|
Thermal spraying. Classification method of adhesive strength by indentation |
DIN EN 15594:2009-08
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
03/105579 DC : DRAFT APR 2003
|
ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD |
08/30168345 DC : DRAFT JULY 2008
|
BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
ISO 16872:2015
|
Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH |
ISO 12900:2015
|
Hard coal Determination of abrasiveness |
BS EN ISO 16859-2:2015
|
Metallic materials. Leeb hardness test Verification and calibration of the testing devices |
BS A 343:1999
|
Nuts, plain or slotted (castellated). Test methods |
BS 7825-3.1:1997
|
Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
EN 4700-002:2016
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
07/30107797 DC : 0
|
BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS |
ISO 15341:2014
|
Graphic technology Method for radius determination of printing cylinders |
ISO 11443:2014
|
Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers |
BS ISO 16143-1:2014
|
Stainless steels for general purposes Corrosion-resistant flat products |
BS EN 4700-003:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
I.S. EN 3908:2017
|
AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
16/30348401 DC : 0
|
BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
BS EN 16602-70-46:2014
|
Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
BS ISO 16635-1 : 2013
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
13/30271610 DC : 0
|
BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
11/30240285 DC : 0
|
BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
13/30246059 DC : 0
|
BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS |
DIN EN ISO 17937:2016-01
|
Dentistry - Osteotome (ISO 17937:2015) |
BS EN 60372:2004
|
Locking devices for ball and socket couplings of string insulator units. Dimensions and tests |
11/30212226 DC : 0
|
BS ISO 21672-1 - DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
02/563622 DC : DRAFT AUG 2002
|
BS EN ISO 1562 - DENTISTRY - CASTING GOLD ALLOYS |
UNI EN ISO 16635-1 : 2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
PREN 10088-2 : DRAFT 2011
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 16877:2015
|
Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH |
04/30098250 DC : DRAFT MAY 2004
|
EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
BS ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
12/30246071 DC : 0
|
BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
13/30252136 DC : 0
|
BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
BS ISO 404:2013
|
Steel and steel products. General technical delivery requirements |
BS EN 50109-2-5:1996
|
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Termination of twin-ax cable for databus applications |
15/30312459 DC : 0
|
BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
09/30201953 DC : 0
|
BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
15/30304304 DC : 0
|
BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
05/30136491 DC : DRAFT JUL 2005
|
EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
BS ISO 14705:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature |
11/30239433 DC : 0
|
BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
BS ISO 17744:2004
|
Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method |
API 11D1 REDLINE : 2009
|
PACKERS AND BRIDGE PLUGS |
BS 2000-450(2000) : 2000
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
UNE-EN ISO 18556:2016
|
Dentistry - Intraoral spatulas (ISO 18556:2016) |
UNE-EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
07/30144587 DC : 0
|
BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
07/30144593 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
BS ISO 4498:2005
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
BS EN 50340:2010
|
Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
00/121221 DC : DRAFT MARCH 2000
|
ISO/CE 1133 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
CEI EN 60372 : 2005
|
LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
BS EN 60352-1:1998
|
Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
I.S. EN ISO 17937:2015
|
DENTISTRY - OSTEOTOME (ISO 17937:2015) |
I.S. EN ISO 80079-36:2016
|
EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014) |
05/30091555 DC : DRAFT MAY 2005
|
ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
07/30139533 DC : 0
|
BS ISO 13337 - SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
BS EN ISO 17078-3:2009
|
Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
ISO 3077:2001
|
Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
I.S. EN ISO 10477:2004
|
DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
BS EN ISO 12156-1:2016
|
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
UNI EN ISO 2702 : 2011
|
HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
ONORM EN 13600 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
UNE-EN 14399-1:2016
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
ISO 16798:2004
|
Links of Grade 8 for use with slings |
ISO/TR 10809-1:2009
|
Cast irons — Part 1: Materials and properties for design |
I.S. EN 16273:2014
|
RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
ISO 1797:2017
|
Dentistry — Shanks for rotary and oscillating instruments |
BS EN ISO 11961:2008
|
Petroleum and natural gas industries. Steel drill pipe |
OIML G 3 : 1983
|
FACTORS INFLUENCING HARDNESS MEASUREMENT (A SYSTEMATIC SURVEY OF RESEARCH RESULTS) |
I.S. EN ISO 14457:2017
|
DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
I.S. EN 12449:2016
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
I.S. EN ISO 14998:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
ISO 6931-2:2005
|
Stainless steels for springs Part 2: Narrow strip |
ISO 4875-2:2006
|
Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
ISO 18203:2016
|
Steel — Determination of the thickness of surface-hardened layers |
ISO 9873:2017
|
Dentistry Intra-oral mirrors |
ISO 7091:2000
|
Plain washers Normal series Product grade C |
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
DIN EN ISO 19715:2016-03 (Draft)
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
PREN 12797 : DRAFT 2017
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
BS EN 12449:2016
|
Copper and copper alloys. Seamless, round tubes for general purposes |
UNE-EN ISO 14457:2013
|
Dentistry - Handpieces and motors (ISO 14457:2012) |
I.S. EN ISO 9873:2017
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
UNE-EN ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
ISO 16143-1:2014
|
Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
I.S. EN ISO 9015-1:2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
I.S. EN ISO 16635-2:2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
UNE-EN ISO 14271:2018
|
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
UNE-EN 16273:2015
|
Railway applications - Track - Forged rail transitions |
PREN 12080 : DRAFT 2015
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
PREN 1337-6 : DRAFT 2018
|
STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
BS EN ISO 6506-2:2014
|
Metallic materials. Brinell hardness test Verification and calibration of testing machines |
NF EN ISO 17078-3 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ASTM F 3056 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
UNE-EN 10088-4:2010
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
UNI EN ISO 17078-3 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
DIN EN 14399-9:2016-01 (Draft)
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
ASTM F 3055 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
EN ISO 6507-3:2018
|
Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
ASTM F 3055 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
EN ISO 6507-2:2018
|
Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) |
EN ISO 6507-4:2018
|
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018) |
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
I.S. EN 50340:2010
|
HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
I.S. ISO 6441:1988
|
PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL) |
ISO 683-13:1974
|
Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
I.S. EN 3299:2007
|
AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
EN 12168:2016
|
Copper and copper alloys - Hollow rod for free machining purposes |
DIN EN ISO 3506-3:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN 14730-1:2014-05 (Draft)
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN ISO 3506-4:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN 12080:2015-06 (Draft)
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
DIN EN 12168:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN ISO 80079-36 E : 2016
|
EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016) |
DIN EN ISO 4498:2010-11
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
BS EN 12450:2012
|
Copper and copper alloys. Seamless, round copper capillary tubes |
BS EN ISO 10666:1999
|
Drilling screws with tapping screw threads. Mechanical and functional properties |
BS EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
ISO 7092:2000
|
Plain washers Small series Product grade A |
ISO 80079-36:2016
|
Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
BS EN 772-1 : 2011
|
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
BS EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
ISO 18265:2013
|
Metallic materials — Conversion of hardness values |
BS EN 1172:2011
|
Copper and copper alloys. Sheet and strip for building purposes |
UNE-EN ISO 13337:2010
|
Spring-type straight pins. Slotted, light duty (ISO 13337:2009) |
BS EN 12797:2000
|
Brazing. Destructive tests of brazed joints |
BS EN 12080:2017
|
Railway applications. Axleboxes. Rolling bearings |
BS EN 13148:2010
|
Copper and copper alloys. Hot-dip tinned strip |
UNE-EN ISO 2702:2011
|
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
BS EN ISO 898-6:1996
|
Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
BS EN 10109-3:1996
|
Metallic materials. Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
BS EN 1337-2:2004
|
Structural bearings Sliding elements |
UNE-EN ISO 6508-2:2015
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
BS EN 14399-1:2015
|
High-strength structural bolting assemblies for preloading General requirements |
I.S. EN 12450:2012
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
I.S. EN 485-1:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13600:2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
I.S. EN ISO 6508-2:2015
|
METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
I.S. EN ISO 13628-2:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
I.S. EN ISO 8751:2007
|
SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
DIN EN 12513:2011-05
|
Founding - Abrasion resistant cast irons |
I.S. EN 772-1:2011
|
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
I.S. EN ISO 10510:2011
|
TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS |
I.S. EN ISO 7153-1:2016
|
SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
I.S. EN ISO 5470-1:2016
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
I.S. EN 12080:2017
|
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
I.S. EN 12166:2016
|
COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
I.S. EN ISO 7085:2000
|
MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
I.S. EN ISO 8750:2007
|
SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
I.S. EN ISO 8752:2009
|
SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
DIN EN 13148:2010-12
|
Copper and copper alloys - Hot-dip tinned strip |
DIN EN 12450:2013-01
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
I.S. EN 1301-1:2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 1043-1:1996-02
|
DESTRUCTIVE TEST ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
I.S. EN ISO 15156-2:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN 12451:2012-08
|
Copper and copper alloys - Seamless, round tubes for heat exchangers |
DIN 34820:2004-05
|
CHAMFERED PLAIN WASHERS FOR USE IN STRUCTURAL STEELWORK |
I.S. EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 1172:2012-02
|
Copper and copper alloys - Sheet and strip for building purposes |
I.S. EN ISO 3887:2018
|
STEELS - DETERMINATION OF THE DEPTH OF DECARBURIZATION (ISO 3887:2017) |
DIN EN 1057:2010-06
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications (includes Amendment A1:2010) |
DIN EN 10003-2:1995-01
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
DIN EN ISO 16744:2004-05
|
DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
I.S. EN 13599:2014
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
I.S. EN 818-7:2002
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
I.S. EN 13605:2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
I.S. EN ISO 2702:2011
|
HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
I.S. EN ISO 1522:2006
|
PAINTS AND VARNISHES - PENDULUM DAMPING TEST |
I.S. EN 12452:2012
|
COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
DIN EN 10088-2:2014-12
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN ISO 10673:2009
|
PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
EN ISO 15156-2:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
DIN EN 12452:2012-08
|
COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
I.S. EN 1172:2011
|
COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
DIN EN 13463-1:2009-07
|
NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
I.S. EN 12168:2016
|
COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN 772-1:2000-09
|
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
I.S. EN ISO 10432:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN ISO 898-1:2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
I.S. EN ISO 14310:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
I.S. EN 13348:2016
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
I.S. EN 13604:2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
I.S. EN ISO 14727:1999
|
DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
I.S. EN 12513:2011
|
FOUNDING - ABRASION RESISTANT CAST IRONS |
DIN EN ISO 1133:2000-02
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
DIN EN ISO 1133:2005-09
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
I.S. EN ISO 13337:2009
|
SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
EN ISO 15156-3:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
I.S. EN 14730-1:2017
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
I.S. EN 10003-2:1995
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
I.S. EN 12451:2012
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
DIN EN ISO 6506-2:2015-02
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
DIN EN ISO 11970:2016-08
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
I.S. EN ISO 10451:2010
|
DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
DIN EN 12080:2017-11
|
Railway applications - Axleboxes - Rolling bearings |
I.S. EN ISO 898-5:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
I.S. EN ISO 16070:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN ISO 11970:2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
I.S. EN 12735-2:2016
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT |
I.S. EN ISO 4498:2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
I.S. EN ISO 3506-3:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 14399-1:2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
SBAC TS 220 : 1
|
TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
BS 2782-3:Method 370:1996
|
Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
VDI/VDE 2616 Blatt 1:2012-08
|
Hardness testing of metallic materials |
BS 2782-7.720A(1997) : 1997 AMD 10722
|
METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
BS 1016-111:1998
|
Methods for analysis and testing of coal and coke Determination of abrasion index of coal |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
ONORM EN ISO 1133-1 : 2012
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
DIN EN ISO 16635-2 E : 2014
|
DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
UNE-EN ISO 12690:2011
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
ASTM F 3302 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
BS EN 14587-1:2007
|
Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
07/30161097 DC : 0
|
EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
06/30143291 DC : DRAFT MAY 2006
|
ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
16/30290361 DC : 0
|
BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
14/30278521 DC : 0
|
BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS |
I.S. EN 13463-1:2009
|
NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
I.S. EN ISO 1562:2004
|
DENTISTRY - CASTING GOLD ALLOYS |
BS EN ISO 12690:2010
|
Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
DIN EN ISO 16635-1:2014-09
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
BS ISO 17218:2014
|
Sterile acupuncture needles for single use |
DIN EN ISO 16859-2:2016-02
|
METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
BS EN 4700-004:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
09/30196832 DC : 0
|
BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
11/30215841 DC : 0
|
BS EN ISO 14457 - DENTISTRY - HAND PIECES AND MOTORS |
BIS IS 1239-2 : 2011 AMD 1 2012
|
STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS |
BS ISO 17918:2015
|
Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
BS ISO 12900:2015
|
Hard coal. Determination of abrasiveness |
15/30285035 DC : 0
|
BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
BS ISO 9154:2016
|
Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
I.S. EN ISO 1797-1:2011
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
04/30074924 DC : DRAFT JUNE 2004
|
EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
DIN EN ISO 18556 E : 2016
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
DIN EN ISO 1797 E : 2017
|
DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
CEI EN 50340 : 2011
|
HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
07/30154260 DC : 0
|
BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
I.S. EN 843-4:2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
I.S. EN ISO 898-6:1996
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
BS EN 20898-6:1992
|
Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
13/30286988 DC : 0
|
BS EN 16662 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - SAFETY REQUIREMENTS AND TEST METHOD |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
UNE-EN ISO 17509:2017
|
Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
I.S. EN 10109-2:1995
|
METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
05/30128683 DC : DRAFT FEB 2005
|
ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
I.S. EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
09/30193829 DC : 0
|
BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
UNE-EN ISO 1797-3:2013
|
Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
BS EN 4700-002:2016
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
UNI EN 4700-005 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
DIN EN ISO 18556:2016-09
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
DIN EN ISO 12670 E : 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
PREN 14399-9 : DRAFT 2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
BS EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials. Hardness testing Hardness test on arc welded joints |
11/30254171 DC : 0
|
BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 4700-004 : 2011
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
15/30269176 DC : 0
|
BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
06/19981869 DC : DRAFT OCT 2006
|
BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
DIN EN 15594 E : 2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
12/30245294 DC : 0
|
BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
07/30162661 DC : 0
|
BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
DIN EN 14587-2:2009-08
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
16/30339349 DC : DRAFT APR 2016
|
BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
BS ISO 5857:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
DIN EN ISO 17945 E : 2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
DIN EN ISO 1797-3:2013-06
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
BS 5600-3.11.1:1991
|
Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness |
UNE-EN 14587-2:2010
|
Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
ISO 8535-1:2016
|
Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
02/703231 DC : DRAFT FEB 2002
|
BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
ISO 10384:2012
|
Hot-rolled carbon steel sheet as defined by chemical composition |
14/30281833 DC : 0
|
BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION |
06/19981867 DC : DRAFT OCT 2006
|
BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
02/712761 DC : DRAFT OCT 2002
|
ISO 15509-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
14/30272288 DC : 0
|
BS ISO 18203 - STEELS - DETERMINATION OF THE THICKNESS OF SURFACE-HARDENED LAYERS |
10/30165712 DC : 0
|
BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
16/30328578 DC : 0
|
BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
DIN EN ISO 12679 E : 2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
17/30359115 DC : 0
|
BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
17/30312468 DC : 0
|
BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
I.S. EN ISO 19490:2017
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
BS EN ISO 9015-2:2016
|
Destructive tests on welds in metallic materials. Hardness testing Microhardness testing of welded joints |
BS ISO 23848-1:2009
|
Machine tools. Ball splines General characteristics and requirements |
BS EN ISO 5182:2009
|
Resistance welding. Materials for electrodes and ancillary equipment |
PREN 12451 : DRAFT 2010
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
BS EN 16771:2016
|
Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
99/121962 DC : DRAFT JUN 1999
|
EN ISO 3126 - PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
API 17G:2006
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
05/30126202 DC : 0
|
EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNE-EN 50340:2011
|
Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
BS EN 50109-2-2 : 1996
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
ISO 19207:2016
|
Thermal spraying — Classification method of adhesive strength by indentation |
BS EN ISO 14271:2017
|
Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
BS EN ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
UNE-EN ISO 9015-2:2016
|
Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
UNE-ISO 23848-1:2013
|
Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
DIN EN ISO 6507-3:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
17/30351887 DC : 0
|
BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
DIN EN ISO 19490 E : 2017
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
API 2SF : 2013
|
MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
API SPEC 14L : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 17G : 2006 : R2011
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
BS EN ISO 12679:2015
|
Thermal spraying. Recommendations for thermal spraying |
UNE-EN ISO 12156-1:2016
|
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
DIN EN ISO 19490:2016-07 (Draft)
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
API 11D1 CHINESE : 2009
|
PACKERS AND BRIDGE PLUGS |
I.S. EN 4700-001:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
I.S. EN ISO 16635-1:2014
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
ISO 15461:2018
|
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
ISO 9140:1998
|
Aerospace Nuts, plain or slotted (castellated) Test methods |
I.S. EN 4677-001:2012
|
AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
UNI EN 4700-003 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
ISO 28079:2009
|
Hardmetals — Palmqvist toughness test |
ISO 6507-4:2018
|
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values |
ONORM EN ISO 6507-3 : 2006
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
UNE-EN ISO 16635-1:2014
|
Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
ISO 17218:2014
|
Sterile acupuncture needles for single use |
UNE-EN ISO 898-2:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
UNE-EN ISO 14917:2017
|
Thermal spraying - Terminology, classification (ISO 14917:2017) |
ISO 6207:1992
|
Seamless nickel and nickel alloy tube |
IEC 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
ISO 14705:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
ONORM EN ISO 6506-2 : 2015
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
UNI EN 4700-007 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
I.S. EN 4700-006:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
ISO 716:1986
|
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
ISO 23848-1:2009
|
Machine tools Ball splines Part 1: General characteristics and requirements |
EN ISO 1797 : 2017
|
DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
EN 14587-1:2007
|
Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
I.S. EN 10225:2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
I.S. EN ISO 7492:2018
|
DENTISTRY - DENTAL EXPLORER (ISO 7492:2018) |
ISO 17804:2005
|
Founding Ausferritic spheroidal graphite cast irons Classification |
ISO 7492:2018
|
Dentistry — Dental explorer |
DIN EN ISO 6507-2:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
I.S. EN 1057:2006
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
ISO 14271:2017
|
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
I.S. EN ISO 17078-3:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 3183-3:1999
|
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
UNE-EN 10088-2:2015
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
I.S. EN ISO 7091:2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
IEC 62899-201:2016
|
Printed electronics - Part 201: Materials - Substrates |
DIN EN 1669:1997-02
|
ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - EARING TEST FOR SHEET AND STRIP |
I.S. EN 10132-1:2000
|
COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
EN ISO 13628-2:2006/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN ISO 7093-1:2000-11
|
PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
DIN EN ISO 8751 E : 2007
|
SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
DIN EN 10328:2005-04
|
Iron and steel - Determination of the conventional depth of hardening after surface heating |
DIN EN 14436 E : 2004
|
COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP |
UNE-EN 14730-1:2018
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
DIN EN 1337-2:2004-07
|
Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
DIN EN 12166:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
ISO 8748:2007
|
Spring-type straight pins Coiled, heavy duty |
BS EN 1043-2:1997
|
Destructive tests on welds in metallic materials. Hardness testing Micro hardness testing on welded joints |
BS EN 12735-2:2016
|
Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment |
BS EN ISO 642:1999
|
Steel hardenability test by end quenching (Jominy test) |
ISO 1133-1:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
ISO 3506-4:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
BS EN ISO 14923:2003
|
Thermal spraying. Characterization and testing of thermally sprayed coatings |
BS EN 14436:2004
|
Copper and copper alloys. Electrolytically tinned strip |
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
BS EN 12168:1998
|
Copper and copper alloys. Hollow rod for free machining purposes |
ISO 16635-1:2013
|
Dentistry — Dental rubber dam technique — Part 1: Hole punch |
ISO 9015-1:2001
|
Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
BS EN 657:2005
|
Thermal spraying. Terminology, classification |
ISO 9015-2:2016
|
Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints |
ISO 2702:2011
|
Heat-treated steel tapping screws — Mechanical properties |
UNE-EN ISO 10510:2011
|
Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
UNE-EN 12450:2013
|
Copper and copper alloys - Seamless, round copper capillary tubes |
ISO 7090:2000
|
Plain washers, chamfered Normal series Product grade A |
UNI EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
UNE-EN ISO 1797-1:2012
|
Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
UNE-EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
EN 60372:2004
|
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests |
EN ISO 6506-2:2014
|
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
ONORM EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
UNE-EN 10225:2010
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN ISO 12156-1:2016
|
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
UNI EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ONORM EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN ISO 1522:2006
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
EN ISO 8748:2007
|
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN ISO 16635-1:2014
|
Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
EN ISO 2639:2002
|
Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
EN ISO 7085 : 1999
|
MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
EN ISO 16744:2003
|
Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003) |
EN ISO 14923:2003
|
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
EN ISO 17937:2015
|
Dentistry - Osteotome (ISO 17937:2015) |
UNI EN 1057 : 2010
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
UNI EN 13348 : 2008
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
UNI EN ISO 4498 : 2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
UNI EN 10225 : 2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
UNI EN 1172 : 2012
|
COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
UNI EN 13599 : 2014
|
COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
UNI EN 12513 : 2011
|
Founding - Abrasion resistant cast irons |
UNI EN ISO 10673 : 2009
|
PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
UNI EN ISO 8752 : 2009
|
SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
UNI EN ISO 10451 : 2010
|
DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
UNI EN 1337-2 : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
UNI EN ISO 10510 : 2011
|
TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS |
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
I.S. EN ISO 7094:2000
|
PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
UNI EN 13463-1 : 2009
|
NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
UNI EN 1652 : 1999
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
UNI EN 12451 : 2012
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
EN ISO 10432:2004
|
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN ISO 13628-2 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN ISO 3506-4 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS |
UNI EN ISO 898-1 : 2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN ISO 13337 : 2009
|
SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
I.S. EN ISO 2639:2002
|
STEELS - DETERMINATION AND VERIFICATION OF THE DEPTH OF CARBURIZED AND HARDENED CASES |
UNI EN ISO 3506-3 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 10328:2005
|
IRON AND STEEL - DETERMINATION OF THE CONVENTIONAL DEPTH OF HARDENING AFTER SURFACE HEATING |
UNI EN 818-7 : 2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
UNI EN ISO 1797-1 : 2011
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
UNI EN 12450 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
UNI EN ISO 14310 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN ISO 898-5 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN 12452 : 2012
|
COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
UNI EN 1301-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN ISO 14998 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
UNI EN 13148 : 2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
UNI EN 13604 : 2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
UNI EN 14163 : 2003
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
UNI EN 15594 : 2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
API 2SC : 2010
|
MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
BIS IS 1501-2 : 2013
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
BS ISO 20826:2006
|
Automotive LPG components. Containers |
08/30180052 DC : DRAFT MAR 2008
|
BS EN 50340 AMD1 - HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
15/30282343 DC : 0
|
BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
03/100442 DC : DRAFT MAY 2003
|
IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
15/30317619 DC : 0
|
BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
DIN 17750:2002-09
|
Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
BS 7251-7:1990
|
Orthopaedic joint prostheses Guide to hip joint simulators |
12/30245297 DC : 0
|
BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
BS ISO 12670 : 2011 COR 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
16/30302544 DC : 0
|
BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
UNI EN ISO 1133-1 : 2012
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
10/30196823 DC : 0
|
BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
ISO 898-3:2018
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes |
I.S. EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
04/30118524 DC : DRAFT AUG 2004
|
EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
08/30179025 DC : DRAFT MAR 2008
|
BS EN ISO 10673 - PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
BS EN 14587-3:2012
|
Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
I.S. EN ISO 12670:2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
BS EN ISO 22068:2014
|
Sintered-metal injection-moulded materials. Specifications |
DIN 21530-4:2016-09
|
MINE SUPPORT - PART 4: TESTING |
09/30208233 DC : 0
|
BS ISO 2702 - HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
BS EN 16725:2016
|
Railway applications. Track. Restoration and repair of manganese crossings |
PREN 485-2 : DRAFT 99
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
DIN EN 10088-4:2010-01
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
13/30264734 DC : 0
|
BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
14/30304003 DC : 0
|
BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
10/30215691 DC : DRAFT NOV 2010
|
BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
DIN EN ISO 12679:2015-12
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
99/710776 DC : DRAFT JULY 1999
|
PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
02/120925 DC : DRAFT MAR 2002
|
ISO/DIS 11443 - PLASTICS - DETERMINATION OF THE FLUIDITY OF PLASTICS USING CAPILLARY AND SLIT-DIE RHEOMETERS |
DIN 13950-1:1990-05
|
DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS |
14/30297210 DC : 0
|
BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
09/30183435 DC : 0
|
BS EN ISO 1133-1 - PLASTICS DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
ISO 6506-2:2017
|
Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
ISO 7741:1986
|
Instruments for surgery — Scissors and shears — General requirements and test methods |
02/702536 DC : DRAFT FEB 2002
|
PREN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
09/30180393 DC : 0
|
BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
13/30259011 DC : 0
|
BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
BS ISO 28079:2009
|
Hardmetals. Palmqvist toughness test |
NF ENV 1090-1 : 96 FD
|
EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
13/30264459 DC : 0
|
BS EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
16/30310674 DC : 0
|
BS EN ISO 14457 - DENTISTRY - HANDPIECES AND MOTORS |
BS EN 14587-2:2009
|
Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
UNI EN ISO 22068 : 2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
13/30268502 DC : 0
|
BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
11/30211730 DC : 0
|
BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS |
DIN EN ISO 9015-1:2011-05
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
BS ISO 9352:2012
|
Plastics. Determination of resistance to wear by abrasive wheels |
BS 3900-E15(1997) : 1997
|
METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) |
BS EN ISO 1133-1:2011
|
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
04/30109383 DC : DRAFT MAY 2004
|
ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
UNE-EN ISO 12679:2016
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
BS ISO 3183-3:1999
|
Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
12/30250146 DC : 0
|
BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
17/30323194 DC : 0
|
BS EN ISO 20569 - DENTISTRY - TREPHINE BURS |
DD ENV 1090-1:1998
|
Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
BS EN ISO 15156-3:2015
|
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 6507-3:2018
|
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
BS EN 50109-2-1:1996
|
Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and WHand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements |
17/30323197 DC : 0
|
BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE |
DIN EN ISO 17937 E : 2016
|
DENTISTRY - OSTEOTOME (ISO 17937:2015) |
04/301144 DC : DRAFT JAN 2004
|
ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
05/30136401 DC : DRAFT JULY 2005
|
ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
BS ISO 16872:2015
|
Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH |
03/106174 DC : DRAFT APR 2003
|
ISO 22826 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING OF NARROW WELDED JOINTS BY LASER AND ELECTRON BEAM (VICKERS AND KNOOP HARDNESS TESTS) |
10/30229550 DC : 0
|
BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
GOST R ISO 8891 : 2005
|
DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% - TECHNICAL REQUIREMENTS - TEST METHODS |
I.S. EN 60372:2004
|
LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
BS ISO 12156-1:1997
|
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
BS ISO 20267:2017
|
Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation |
BS ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
BS ISO 22826:2005
|
Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
04/30103964 DC : DRAFT MAY 2004
|
BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
04/30107683 DC : DRAFT DEC 2004
|
BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
BS EN ISO 9873:2017
|
Dentistry. Intra-oral mirrors |
UNI EN ISO 21672-1 : 2012
|
DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
BS 7598(1992) : 1992 AMD 8488
|
SPECIFICATION FOR MECHANICAL PROPERTIES OF HEAT-TREATED STEEL TAPPING SCREWS |
UNI EN ISO 1797-3 : 2013
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
API 17G : 2006 : R2016
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
08/30141132 DC : DRAFT APR 2008
|
BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
ISO 674:1988
|
Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
04/30123693 DC : DRAFT OCT 2004
|
EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
IS 1367 : Part 3 : 2017
|
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
ISO 14190:1998
|
Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification |
BS EN 10088-4:2009
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
BS EN ISO 14917:2017
|
Thermal spraying. Terminology, classification |
API 17J REDLINE : 2008
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
API 14A RUSSIAN : 2001
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
ASTM F 3056 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE
|
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
API 19G3 : 2011
|
RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 13847:2013
|
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
ISO 6621-3:2000
|
Internal combustion engines Piston rings Part 3: Material specifications |
BS EN ISO 7492:2018
|
Dentistry. Dental explorer |
NF EN ISO 12690 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
BS IEC 62899-201 : 2016
|
PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
ISO 1355:1989
|
Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) |
UNI EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
I.S. EN ISO 14271:2017
|
RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
I.S. EN ISO 14918:1999
|
THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS |
BS ISO 4960:2007
|
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
ISO 13584-511:2006
|
Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
ISO 7689:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
DIN EN ISO 9873 E : 2000
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
ISO 15590-3:2004
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
17/30363994 DC : 0
|
BS EN 16662-1 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - PART 1: GENERAL SAFETY AND PERFORMANCE REQUIREMENTS |
17/30358164 DC : 0
|
BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
CEI EN 60352-1 : 1998
|
SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
DIN EN 14587-1:2016-08 (Draft)
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN FIXED PLANT |
ASTM E 92 : 2017 : REDLINE
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
UNI EN 4700-001 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
PREN 12449 : DRAFT 2011
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
EN ISO 14271:2017
|
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
ONORM EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
ONORM EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
I.S. EN ISO 12156-1:2016
|
DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
ISO 4739:1985
|
Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
ISO 1562:2004
|
Dentistry Casting gold alloys |
ISO 20826:2006
|
Automotive LPG components Containers |
ISO 6932:2014
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
ISO 12156-1:2016
|
Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
I.S. EN ISO 12690:2010
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
I.S. EN 4700-005:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
DIN EN ISO 3887:2016-08 (Draft)
|
STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
I.S. EN ISO 6507-3:2018
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
I.S. EN 50109-2-5:1997
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
I.S. EN 14587-1:2007
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN A FIXED PLANT |
I.S. EN ISO 6506-2:2014
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
EN 14163:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
DIN EN ISO 8752 E : 2009
|
SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
DIN EN ISO 1522:2007-04
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
DIN EN ISO 8750 E : 2007
|
SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
DIN EN ISO 14233:2003-10
|
DENTISTRY - POLYMER-BASED DIE MATERIALS |
DIN EN ISO 8748 E : 2007
|
SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
DIN EN ISO 1797-1:2011-11
|
DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011) |
DIN EN 485-1:2016-10
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 1337-2 E : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
DIN EN 10151:2003-02
|
STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
DIN EN 818-7:2008-07
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
DIN EN ISO 7093-2:2000-11
|
PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
DIN EN 10225:2009-10
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
BS EN 12811-3:2002
|
Temporary works equipment Load testing |
BS EN 13605:2013
|
Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
BS EN 12805:2002
|
Automotive LPG components. Containers |
BS EN ISO 10432:2004
|
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
ISO 19715:2017
|
Dentistry — Filling instrument with contra angle |
ISO 12679:2011
|
Thermal spraying Recommendations for thermal spraying |
BS EN 12735-1:2016
|
Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems |
BS EN 14163:2001
|
Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
ISO 13337:2009
|
Spring-type straight pins — Slotted, light duty |
BS EN 14870-3:2006
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
ISO 10673:2009
|
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
BS EN ISO 15156-2:2015
|
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
BS EN 12513:2011
|
Founding. Abrasion resistant cast irons |
ISO 14727:1998
|
Dental implants Prefabricated parts connecting suprastructures to dental implants Contents of technical file |
UNE-EN ISO 3506-2:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
BS EN ISO 13628-7:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
UNE-EN ISO 1522:2007
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
ISO 17937:2015
|
Dentistry Osteotome |
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
BS EN 23878:1993
|
Hardmetals. Vickers hardness test |
ISO 12690:2010
|
Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
ISO 16744:2003
|
Dentistry Base metal materials for fixed dental restorations |
BS EN ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
BS EN ISO 7090:2000
|
Plain washers, chamfered. Normal series. Product grade A |
BS EN ISO 14233:2003
|
Dentistry. Polymer-based die materials |
ISO 8752:2009
|
Spring-type straight pins — Slotted, heavy duty |
ISO 7153-1:2016
|
Surgical instruments Materials Part 1: Metals |
ISO 15087-1:1999
|
Dental elevators — Part 1: General requirements |
ISO 13628-7:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
ISO 1797-3:2013
|
Dentistry Shanks for rotary instruments Part 3: Shanks made of ceramics |
ISO 21672-1:2012
|
Dentistry — Periodontal probes — Part 1: General requirements |
ISO 8750:2007
|
Spring-type straight pins Coiled, standard duty |
ISO 14233:2003
|
Dentistry Polymer-based die materials |
UNE-EN 12452:2013
|
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
UNE-EN ISO 7153-1:2017
|
Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
BS EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
BS EN ISO 4516:2002
|
Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
BS EN 485-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN ISO 1562:2004
|
Dentistry. Casting gold alloys |
UNE-EN 13601:2014
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
ISO 16070:2005
|
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
BS EN 12451:2012
|
Copper and copper alloys. Seamless, round tubes for heat exchangers |
I.S. EN ISO 3506-2:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
BS EN ISO 15136-2:2006
|
Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
BS EN ISO 1522:2006
|
Paints and varnishes. Pendulum damping test |
UNI EN 12735-1 : 2010
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
BS EN 818-7 : 2002
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
UNE-EN 13148:2012
|
Copper and copper alloys - Hot-dip tinned strip |
BS EN 20898-2:1994
|
Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
ISO 7093-2:2000
|
Plain washers Large series Part 2: Product grade C |
ISO 3878:1983
|
Hardmetals — Vickers hardness test |
BS EN ISO 15087-1:2001
|
Dental elevators General requirements |
BS EN ISO 14727:1999
|
Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
BS EN 12390-4:2000
|
Testing hardened concrete Compressive strength. Specification for testing machines |
UNE-EN 12735-2:2016
|
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
BS EN ISO 16070:2005
|
Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
ISO 14917:2017
|
Thermal spraying — Terminology, classification |
ISO 16635-2:2014
|
Dentistry Dental rubber dam instruments Part 2: Clamp forceps |
BS EN 1057 : 2006
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
BS EN ISO 1133:2005
|
Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
UNE-EN 12451:2013
|
Copper and copper alloys - Seamless, round tubes for heat exchangers |
UNE-EN ISO 10673:2010
|
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) |
ISO 8891:1998
|
Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
EN 12735-1:2016
|
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
ISO 1797-1:2011
|
Dentistry Shanks for rotary instruments Part 1: Shanks made of metals |
BS EN 15311:2007
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
ISO 16859-2:2015
|
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices |
ISO 18556:2016
|
Dentistry Intraoral spatulas |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 4498:2010
|
Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
ISO 7093-1:2000
|
Plain washers Large series Part 1: Product grade A |
I.S. EN 12735-1:2016
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
ISO 4498-1:1990
|
Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 1: Materials of essentially uniform section hardness |
ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings |
ISO 4516:2002
|
Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
ISO 898-6:1994
|
Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread |
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions |
BS EN ISO 8748:2007
|
Spring-type straight pins. Coiled, heavy duty |
ISO 14998:2013
|
Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 14310:2008
|
Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 6508-2:2015
|
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
ISO 15098-1:1999
|
Dental tweezers Part 1: General requirements |
ISO 13625:2002
|
Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
BS EN ISO 2702:2011
|
Heat-treated steel tapping screws. Mechanical properties |
UNE-EN 13600:2014
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
BS EN 3299:2007
|
Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification |
ISO 5182:2016
|
Resistance welding Materials for electrodes and ancillary equipment |
UNE-EN ISO 3506-3:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
BS EN 13599:2014
|
Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
BS EN ISO 3650:1999
|
Geometrical product specifications (GPS). Length standards. Gauge blocks |
BS EN 13601:2013
|
Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
BS EN ISO 2639:2002
|
Steels. Determination and verification of the depth of carburized and hardened cases |
BS EN ISO 10451:2010
|
Dentistry. Contents of technical file for dental implant systems |
BS EN 12452:2012
|
Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
ISO 22068:2012
|
Sintered-metal injection-moulded materials — Specifications |
BS EN 1652:1998
|
Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
I.S. EN ISO 3506-1:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ISO 19490:2017
|
Dentistry — Sinus membrane elevator |
BS EN 12166:2011
|
Copper and copper alloys. Wire for general purposes |
BS EN ISO 3126:2005
|
Plastics piping systems. Plastics components. Determination of dimensions |
ISO 17078-3:2009
|
Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN ISO 8751:2007
|
Spring-type straight pins. Coiled, light duty |
ISO 12670:2011
|
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
ISO 2639:2002
|
Steels Determination and verification of the depth of carburized and hardened cases |
ISO 7089:2000
|
Plain washers Normal series Product grade A |
UNE-EN 13348:2016
|
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
BS EN 13604:2013
|
Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
BS EN ISO 8891:2000
|
Dental casting alloys with noble metal content of at least 25% but less than 75% |
ISO 10451:2010
|
Dentistry — Contents of technical file for dental implant systems |
UNE-EN ISO 898-5:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
UNE-EN ISO 9873:2017
|
Dentistry - Intra-oral mirrors (ISO 9873:2017) |
UNE-EN 13463-1:2011
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
BS EN ISO 13337:2009
|
Spring-type straight pins. Slotted, light duty |
ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 642:1999
|
Steel — Hardenability test by end quenching (Jominy test) |
UNE-EN 485-1:2017
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
UNE-EN ISO 3506-4:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
DIN EN ISO 80079-36:2016-12
|
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
DIN EN ISO 3887:2003-10
|
STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
EN 20898-6 : 1992
|
MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
EN 15594:2009
|
Railway applications - Track - Restoration of rails by electric arc welding |
EN 772-1:2011+A1:2015
|
Methods of test for masonry units - Part 1: Determination of compressive strength |
EN ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
EN ISO 7089 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
EN 14587-2:2009
|
Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
EN ISO 22068:2014
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
EN 14399-1:2015
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
EN 14798:2005
|
Glass packaging - Hand-held crown bottle openers - Dimensions |
EN 24498-1 : 1993
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS |
EN 3908:2017
|
Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
EN ISO 7093-2 : 2000
|
PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
EN ISO 3126:2005
|
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
EN 13599:2014
|
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
EN ISO 12679:2015
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
EN 10225:2009
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN ISO 18556:2016
|
Dentistry - Intraoral spatulas (ISO 18556:2016) |
EN ISO 8752:2009
|
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
EN ISO 4516 : 2002
|
METALLIC AND OTHER INORGANIC COATINGS - VICKERS AND KNOOP MICROHARDNESS TESTS |
EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
EN 14616:2004
|
Thermal spraying - Recommendations for thermal spraying |
EN ISO 17078-3:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 4700-005:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
EN ISO 16859-2 : 2015
|
METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
EN ISO 7153-1:2016
|
Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
EN ISO 10510:2011
|
Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
EN ISO 10673:2009
|
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
EN 14399-9:2018
|
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
EN ISO 3506-4:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
EN 23878:1993
|
Hardmetals - Vickers hardness test (ISO 3878:1983) |
EN 16451:2015
|
Railway applications - Braking - Brake pad holder |
EN ISO 14727:1998/AC:1998
|
DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
EN 16602-70-46:2014
|
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN 4700-003:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
EN ISO 15087-1:2001
|
Dental elevators - Part 1: General requirements (ISO 15087-1:1999) |
EN 13604:2013
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
EN ISO 19490:2017
|
Dentistry - Sinus membrane elevator (ISO 19490:2017) |
EN ISO 10666 : 1999
|
DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES |
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN ISO 3887:2018
|
Steels - Determination of the depth of decarburization (ISO 3887:2017) |
EN ISO 7094:2000/AC:2002
|
PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
EN 843-4 : 2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
EN ISO 1133-1:2011
|
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
EN ISO 14310:2008
|
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 13628-7:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
EN ISO 14233:2003
|
Dentistry - Polymer-based die materials (ISO 14233:2003) |
EN 20898-2 : 1993
|
MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
EN ISO 8751:2007
|
Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
EN 657:2005
|
Thermal spraying - Terminology, classification |
EN ISO 1797-3:2013
|
Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
EN ISO 10451:2010
|
Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
EN ISO 3650:1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS |
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN ISO 14917:2017
|
Thermal spraying - Terminology, classification (ISO 14917:2017) |
EN ISO 10669 : 1999
|
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
EN 15311:2007
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
EN 1653:1997/A1:2000
|
COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
EN 4700-007:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
EN 14870-3:2006
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
EN ISO 7090 : 2000
|
PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000) |
EN 14436:2004
|
Copper and copper alloys - Electrolytically tinned strip |
EN 818-7:2002+A1:2008
|
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
EN ISO 7092 : 2000
|
PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A |
EN ISO 7093-1 : 2000
|
PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000) |
EN 16725:2016
|
Railway applications - Track - Restoration and repair of manganese crossings |
EN ISO 642:1999
|
Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
EN ISO 15732 : 2005
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003) |
EN ISO 16635-2:2014
|
Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
EN ISO 2702:2011
|
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
EN ISO 19715:2017
|
Dentistry - Filling instrument with contra angle (ISO 19715:2017) |
EN ISO 16070:2005
|
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN ISO 15098-1:2001
|
Dental tweezers - Part 1: General requirements (ISO 15098-1:2000) |
EN 4677-001:2012
|
Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies |
EN ISO 8891 : 2000
|
DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% |
EN ISO 8750:2007
|
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
EN 3299:2007
|
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
EN ISO 14998:2013
|
Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN 14587-3:2012
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
EN ISO 13337:2009
|
Spring-type straight pins - Slotted, light duty (ISO 13337:2009) |
EN ISO 1562 : 2004
|
DENTISTRY - CASTING GOLD ALLOYS |
EN ISO 15136-2:2006
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
EN 14730-1:2017
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
EN 14870-2:2004
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN 1669:1996
|
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
EN ISO 17509:2016
|
Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
EN 4700-004:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
EN ISO 21672-1:2012
|
Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
EN 4700-001:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
EN ISO 13625:2002
|
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
EN ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
EN 4700-006:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
EN 16273:2014
|
Railway applications - Track - Forged rail transitions |
EN ISO 1797-1:2011
|
Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
EN 3380 : 1996
|
AEROSPACE SERIES - RINGS, RETAINING - TECHNICAL SPECIFICATION |
EN ISO 12670:2015
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
EN ISO 898-6 : 1995
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
EN 13892-2 : 2002
|
METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
UNE-EN ISO 21672-1:2012
|
Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
API 16A : 2017
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
BS EN 16451:2015
|
Railway applications. Braking. Brake pad holder |
04/30105010 DC : DRAFT JUL 2004
|
ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
BS ISO 8642:2008
|
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
UNI EN ISO 9015-1 : 2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
BS A 295:1985
|
Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
ABMA ISO 13411 : 1998
|
AEROSPACE - AIRFRAME NEEDLE ROLLER, CYLINDRICAL ROLLER AND TRACK ROLLER BEARINGS - TECHNICAL SPECIFICATION |
I.S. EN 50109-2-3:1997
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
13/30263773 DC : 0
|
BS ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
DIN EN ISO 22068:2014-06
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
16/30339983 DC : 0
|
BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT |
BS EN ISO 16635-1:2014
|
Dentistry. Dental rubber dam technique Hole punch |
14/30284697 DC : 0
|
BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
BS EN 50109-2-3:1996
|
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Contacts of electrical connectors |
I.S. EN 10109-3:1995
|
METALLIC MATERIALS - HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
DIN EN ISO 12670:2015-12
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
ISO 17744:2004
|
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method |
15/30303331 DC : 0
|
BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
ISO 18746:2016
|
Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
I.S. EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
PREN ISO 2702 : DRAFT 2009
|
HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
BS ISO 13628-7 : 2005 AMD 16887
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
15/30311766 DC : 0
|
BS ISO 9015-2 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
DIN EN 15551:2013-05 (Draft)
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
BS 2782-3 Method 370:1990
|
Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
BS EN 3908:2017
|
Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
17/30361675 DC : 0
|
BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION |
I.S. EN 4700-003:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
BIS IS 513 : 2008 AMD 2 2016
|
COLD REDUCED LOW CARBON STEEL SHEET AND STRIP |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNE-EN ISO 17937:2016
|
Dentistry - Osteotome (ISO 17937:2015) |
DIN ISO 4498 E : 2005
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
17/30303088 DC : 0
|
BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER |
DIN EN ISO 16859-2 E : 2016
|
METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
BS ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
BS EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
BS EN ISO 18556:2016
|
Dentistry. Intraoral spatulas |
13/30280533 DC : 0
|
BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
BS ISO 18203:2016
|
Steel. Determination of the thickness of surface-hardened layers |
03/306713 DC : DRAFT APR 2003
|
EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
BS EN 4700-007:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
03/311760 DC : DRAFT JULY 2003
|
ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
09/30194594 DC : 0
|
BS ISO 22394 - HARDMETALS - KNOOP HARDNESS TEST |
DIN EN ISO 17945:2015-08
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
DIN EN 16451 E : 2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
13/30252112 DC : 0
|
BS EN ISO 11970 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS |
BS ISO 12679 : 2011
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
UNE-EN ISO 22068:2014
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
BS EN ISO 1797-3:2013
|
Dentistry. Shanks for rotary instruments Shanks made of ceramics |
ISO 156:1982
|
Metallic materials Hardness test Verification of Brinell hardness testing machines |
BS 3900-E14(1997) : 1997 AMD 16870
|
METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
ISO 3650:1998
|
Geometrical Product Specifications (GPS) Length standards Gauge blocks |
EN 13605:2013
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
BIS IS 1501-3 : 2013
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
15/30332554 DC : 0
|
BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
15/30291323 DC : 0
|
BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS |
BS ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Strength and quality of materials |
BS EN ISO 17937:2015
|
Dentistry. Osteotome |
UNE-EN ISO 1133-1:2012
|
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
ABMA ISO 14190 : 1997
|
AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
97/703009 DC : 0
|
PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
17/30335249 DC : 0
|
BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
BS ISO 6932:2014
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
BS ISO 5182 : 2008
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
BS EN ISO 1797:2017
|
Dentistry. Shanks for rotary and oscillating instruments |
EN 13601:2013
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
BS A 363:2000
|
Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
03/118501 DC : DRAFT NOV 2003
|
ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
AWS D3.6M : 2010
|
UNDERWATER WELDING CODE |
BS 2A 295:2000
|
Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
ISO 9154:2016
|
Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
ISO/TR 10108:1989
|
Steel Conversion of hardness values to tensile strength values |
DIN EN ISO 12690:2011-04
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
ISO 4498-2:1981
|
Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen |
I.S. EN ISO 19715:2017
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
UNE-EN 15594:2010
|
Railway applications - Track - Restoration of rails by electric arc welding |
PREN 4700-007 : 200P2
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
PREN 4700-001 : 200P2
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
PREN 4700-002 : 200P3
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
I.S. EN ISO 12679:2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
ISO 6507-2:2018
|
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
UNI EN 14587-2 : 2009
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
I.S. EN ISO 1133-1:2011
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
API 16AR : 2017
|
STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
I.S. EN 16451:2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
I.S. EN ISO 6507-2:2018
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2018) |
I.S. EN ISO 22068:2014
|
SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
I.S. EN 15594:2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
16/30258490 DC : 0
|
BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
I.S. EN ISO 15156-3:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
EN ISO 7492:2018
|
Dentistry - Dental explorer (ISO 7492:2018) |
I.S. EN 4700-004:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
ISO 22034-1:2007
|
Steel wire and wire products — Part 1: General test methods |
ISO 9352:2012
|
Plastics — Determination of resistance to wear by abrasive wheels |
ISO 7481:2000
|
Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
I.S. EN ISO 9015-2:2016
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
BS EN 14399-9:2009
|
High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
17/30359541 DC : 0
|
BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
BS EN ISO 14918:1998
|
Thermal spraying. Approval testing of thermal sprayers |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
UNI EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
ASTM F 3184 : 2016
|
Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
EN ISO 14457:2017
|
Dentistry - Handpieces and motors (ISO 14457:2017) |
ASTM F 3318 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
EN ISO 14918:1998
|
Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
EN ISO 9873:2017
|
Dentistry - Intra-oral mirrors (ISO 9873:2017) |
I.S. EN 10088-4:2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN ISO 6507-4:2006
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES (ISO 6507-4:2018) |
ISO 683-10:1987
|
Heat-treatable steels, alloy steels and free-cutting steels Part 10: Wrought nitriding steels |
ISO 4960:2007
|
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
ISO 8535-2:2003
|
Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes |
ISO 14457:2017
|
Dentistry — Handpieces and motors |
I.S. EN 14587-2:2009
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
I.S. EN 14399-9:2009
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
DIN EN 13601:2013-09
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
DIN EN ISO 10510:2011-07
|
Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
DIN EN 772-1:2016-05
|
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
DIN EN ISO 15087-1 E : 2002
|
DENTAL ELEVATORS - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 10451:2010-11
|
Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
DIN EN 14399-1:2015-04
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 10666:2000-02
|
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
DIN EN 13600:2013-09
|
Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
ISO 17509:2016
|
Dentistry Torque transmitter for handpieces |
ISO 10669:1999
|
Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
BS EN ISO 6508-2:2015
|
Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
ISO 1522:2006
|
Paints and varnishes — Pendulum damping test |
BS EN ISO 15732:2005
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
UNE-EN ISO 5470-1:2017
|
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 10003-2:1995
|
Metallic materials. Brinell hardness test Verification of Brinell hardness testing machines |
UNE-EN 12735-1:2016
|
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
BS EN 14870-2:2004
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
BS EN ISO 6507-3:2005
|
Metallic materials. Vickers hardness test Calibration of reference blocks |
BS EN 14798:2005
|
Glass packaging. Hand-held crown bottle openers. Dimensions |
BS EN ISO 1797-1:2011
|
Dentistry. Shanks for rotary instruments Shanks made of metals |
ISO 10510:2011
|
Tapping screw and washer assemblies with plain washers |
ISO 8751:2007
|
Spring-type straight pins Coiled, light duty |
BS EN 843-4:2005
|
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
BS EN 13892-2:2002
|
Methods of test for screed materials Determination of flexural and compressive strength |
BS EN 10225:2009
|
Weldable structural steels for fixed offshore structures. Technical delivery conditions |
BS EN 1043-1:1996
|
Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
ISO 10666:1999
|
Drilling screws with tapping screw thread — Mechanical and functional properties |
BS EN ISO 10510:2011
|
Tapping screw and washer assemblies with plain washers |
ISO 15732:2003
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
01/715268 DC : DRAFT NOV 2001
|
BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
BS EN 1653:1998
|
Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
12/30236742 DC : 0
|
BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS |
BS EN ISO 16744:2003
|
Dentistry. Base metal materials for fixed dental restorations |
BS EN ISO 13625:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
BS EN 10151:2002
|
Stainless steel strip for springs. Technical delivery conditions |
BS EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
DIN EN ISO 8748:2007-07
|
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
EN 13148 : 2010
|
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
EN ISO 9015-2:2016
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
EN 10328:2005
|
Iron and steel - Determination of the conventional depth of hardening after surface heating |
DIN EN ISO 9873:2000-07
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
DIN EN ISO 1562:2004-08
|
DENTISTRY - CASTING GOLD ALLOYS |
EN 12450:2012
|
Copper and copper alloys - Seamless, round copper capillary tubes |
EN 12811-3:2002
|
Temporary works equipment - Part 3: Load testing |
EN 1172:2011
|
Copper and copper alloys - Sheet and strip for building purposes |
EN 50109-2-5:1995
|
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
DIN EN ISO 2702:2011-08
|
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
EN 12452:2012
|
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
EN 1301-1:2008
|
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
EN 10151:2002
|
Stainless steel strip for springs - Technical delivery conditions |
BS 4425:1988
|
Specification for dental casting gold alloys |
EN 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
DIN EN 14436:2004-11
|
Copper and copper alloys - Electrolytically tinned strip |
EN 50340:2010
|
HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
DIN EN ISO 8751:2007-07
|
Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
EN ISO 12690:2010
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
DIN EN ISO 898-6:1996-02
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
DIN EN 843-4:2005-08
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
DIN EN ISO 3126:2005-05
|
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
DIN EN ISO 4516:2002-10
|
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
I.S. EN ISO 13533:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
DIN EN 14730-1:2010-12
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN ISO 898-2:2012-08
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
DIN EN ISO 13337:2009-10
|
SPRING-TYPE STRAIGHT PINS, SLOTTED, LIGHT DUTY |
UNE-EN 772-1:2011
|
Methods of test for masonry units - Part 1: Determination of compressive strength |
ASME B89.1.9 : 2002 : R2007
|
GAGE BLOCKS |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2003 : R2007
|
GAGE BLOCKS |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2002
|
GAGE BLOCKS |
ASME B89.1.9 : 2002 : INC : ERR 1 : 2003-12 : R2012
|
GAGE BLOCKS |