BS ISO 14627:2012
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
04/30098257 DC : DRAFT MAY 2004
|
EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
DIN ISO 22826:2008-08
|
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
13/30263803 DC : 0
|
BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
BS 7814:1995
|
Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
00/709299 DC : DRAFT JUNE 2000
|
ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
17/30315891 DC : 0
|
BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
16/30319126 DC : 0
|
BS ISO 20267 - THERMAL SPRAYING - DETERMINATION OF INTERFACIAL TOUGHNESS OF CERAMIC COATINGS BY INDENTATION |
15/30293878 DC : 0
|
BS ISO 19207 - THERMAL SPRAYING - CLASSIFICATION METHOD OF ADHESIVE STRENGTH BY INDENTATION |
EN 15129:2018 (edition 2)
|
Anti-seismic devices |
ISO 20267:2017
|
Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation |
ADA 64 : 86(R1994)
|
DENTAL EXPLORERS |
I.S. EN ISO 11125-3:1998
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 3: DETERMINATION OF HARDNESS |
ISO 14705:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
ISO 22826:2005
|
Destructive tests on welds in metallic materials Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
DIN EN ISO 10673:2009-10
|
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
BS EN ISO 10673:2009
|
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A |
EN 1043-1:1995
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
EN 50109-2-3:1995
|
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
EN 1337-2:2004
|
Structural bearings - Part 2: Sliding elements |
DIN EN ISO 6507-1:2006-03
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
DIN EN 15551:2011-01
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
ISO 14627:2012
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
ISO 17918:2015
|
Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
I.S. EN 1043-1:1996
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
I.S. EN ISO 7785-1:1999
|
DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
BS ISO 19207:2016
|
Thermal spraying. Classification method of adhesive strength by indentation |
DIN EN 15551:2013-05 (Draft)
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
16/30348401 DC : 0
|
BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
09/30201953 DC : 0
|
BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
BS ISO 14705:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature |
07/30144593 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
I.S. EN 15129:2009
|
ANTI-SEISMIC DEVICES |
DIN EN ISO 10477:2005-01
|
DENTISTRY - POLYMER BASED CROWN AND BRIDGE MATERIALS |
ISO 18203:2016
|
Steel — Determination of the thickness of surface-hardened layers |
UNE-EN ISO 14271:2018
|
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
EN ISO 6507-3:2018
|
Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
BS EN 1758:1998
|
Copper and copper alloys. Strip for lead frames |
ISO 18265:2013
|
Metallic materials — Conversion of hardness values |
BS EN 1172:2011
|
Copper and copper alloys. Sheet and strip for building purposes |
BS EN 1337-2:2004
|
Structural bearings Sliding elements |
DIN EN 1043-1:1996-02
|
DESTRUCTIVE TEST ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
I.S. EN ISO 6507-1:2018
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD (ISO 6507-1:2018) |
DIN EN 1172:2012-02
|
Copper and copper alloys - Sheet and strip for building purposes |
I.S. EN ISO 10673:2009
|
PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
I.S. EN 1172:2011
|
COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
16/30290361 DC : 0
|
BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
BS 7077-1.1(1993) : AMD 8364
|
DENTAL HANDPIECES AND ACCESSORIES - HANDPIECES - SPECIFICATION FOR HIGH SPEED AIR TURBINE HANDPIECES |
BS ISO 17918:2015
|
Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
07/30154260 DC : 0
|
BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
I.S. EN 843-4:2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
I.S. EN 16602-70-46:2014
|
SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
BS 7651(1993) : 1993 AMD 9230
|
SPECIFICATION FOR DENTAL POLYMER-BASED CROWN AND BRIDGE MATERIALS |
BS 7079-E8(1994) : 1994 AMD 9729
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METALLIC BLASTCLEANING ABRASIVES - METHOD FOR DETERMINATION OF HARDNESS |
ISO 6507-3:2018
|
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
14/30272288 DC : 0
|
BS ISO 18203 - STEELS - DETERMINATION OF THE THICKNESS OF SURFACE-HARDENED LAYERS |
16/30328578 DC : 0
|
BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
BS ISO 23848-1:2009
|
Machine tools. Ball splines General characteristics and requirements |
ISO 19207:2016
|
Thermal spraying — Classification method of adhesive strength by indentation |
BS EN ISO 14271:2017
|
Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
BS EN 16602-70-46:2014
|
Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
UNE-ISO 23848-1:2013
|
Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
DIN EN ISO 6507-3:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
BIS IS 1501-1 : 2013
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
ONORM EN ISO 6507-3 : 2006
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
I.S. EN 27785-1:1994
|
DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
ISO 23848-1:2009
|
Machine tools Ball splines Part 1: General characteristics and requirements |
EN ISO 10477:2004
|
Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) |
ISO 17218:2014
|
Sterile acupuncture needles for single use |
EN ISO 6507-1:2018
|
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018) |
ISO 14271:2017
|
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
DIN EN 1337-2:2004-07
|
Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
BS EN ISO 14923:2003
|
Thermal spraying. Characterization and testing of thermally sprayed coatings |
ISO 7785-2:1995
|
Dental handpieces Part 2: Straight and geared angle handpieces |
EN ISO 14923:2003
|
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
UNI EN 1172 : 2012
|
COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
UNI EN ISO 10673 : 2009
|
PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
UNI EN 1337-2 : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
UNI EN 1654 : 1999
|
COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
UNI EN 1652 : 1999
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
15/30282343 DC : 0
|
BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
08/30179025 DC : DRAFT MAR 2008
|
BS EN ISO 10673 - PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
I.S. EN ISO 7785-2:1998
|
DENTAL HANDPIECES - PART 2: STRAIGHT AND GEARED ANGLE HANDPIECES |
DIN EN 15551 E : 2011
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
PREN 485-2 : DRAFT 99
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
13/30264734 DC : 0
|
BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
ASTM C 1327 : 2015 : REDLINE
|
TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS |
99/710776 DC : DRAFT JULY 1999
|
PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
13/30259011 DC : 0
|
BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
ISO 18746:2016
|
Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
ISO 6507-1:2018
|
Metallic materials — Vickers hardness test — Part 1: Test method |
07/30162661 DC : 0
|
BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
11/30217705 DC : 0
|
BS ISO 14627 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS AT ROOM TEMPERATURE BY INDENTATION FRACTURE METHOD |
16/30290355 DC : 0
|
BS EN ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
03/106174 DC : DRAFT APR 2003
|
ISO 22826 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING OF NARROW WELDED JOINTS BY LASER AND ELECTRON BEAM (VICKERS AND KNOOP HARDNESS TESTS) |
BS 7077-1.2(1992) : AMD 8285
|
DENTAL HANDPIECES AND ACCESSORIES - DENTAL HANDPIECES - SPECIFICATION FOR STRAIGHT AND GEARED ANGLE HANDPIECES |
BS ISO 20267:2017
|
Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation |
BS ISO 22826:2005
|
Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
BS 7598(1992) : 1992 AMD 8488
|
SPECIFICATION FOR MECHANICAL PROPERTIES OF HEAT-TREATED STEEL TAPPING SCREWS |
08/30141132 DC : DRAFT APR 2008
|
BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
I.S. EN ISO 14271:2017
|
RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
EN ISO 14271:2017
|
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
UNE-EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
ISO 4739:1985
|
Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
I.S. EN ISO 6507-3:2018
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
I.S. EN 50109-2-5:1997
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
DIN EN ISO 6507-1:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
DIN EN 1337-2 E : 2004
|
STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
UNE-EN 1172:2012
|
Copper and copper alloys - Sheet and strip for building purposes |
ISO 10673:2009
|
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
BS EN 23878:1993
|
Hardmetals. Vickers hardness test |
BS EN ISO 7785-2:1998
|
Dental handpieces Straight and geared angle handpieces |
BS EN ISO 4516:2002
|
Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
BS EN ISO 7785-1:1999
|
Dental handpieces High-speed air turbine handpieces |
ISO 3878:1983
|
Hardmetals — Vickers hardness test |
UNE-EN ISO 10673:2010
|
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) |
ISO 7785-1:1997
|
Dental handpieces Part 1: High-speed air turbine handpieces |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 4516:2002
|
Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
ISO 13397-1:1995
|
Periodontal curettes, dental scalers and excavators Part 1: General requirements |
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
BS EN 1652:1998
|
Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
BS EN 1654:1998
|
Copper and copper alloys. Strip for springs and connectors |
EN 1758:1997
|
Copper and copper alloys - Strip for lead frames |
EN ISO 4516 : 2002
|
METALLIC AND OTHER INORGANIC COATINGS - VICKERS AND KNOOP MICROHARDNESS TESTS |
EN ISO 10673:2009
|
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN 23878:1993
|
Hardmetals - Vickers hardness test (ISO 3878:1983) |
EN 16602-70-46:2014
|
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN ISO 7785-1:1999
|
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
EN ISO 15403:2005
|
Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000) |
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN 1653:1997/A1:2000
|
COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
EN 843-4 : 2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
EN 27785-1 : 1994
|
DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
EN ISO 13397-1:1995
|
Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995) |
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN ISO 7785-2:1997
|
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
EN 1654:1997/AC:2003
|
COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
BS ISO 17218:2014
|
Sterile acupuncture needles for single use |
I.S. EN 50109-2-3:1997
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
18/30346200 DC : DRAFT APR 2018
|
BS ISO 21618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY INDENTATION FRACTURE (IF) METHOD |
04/30098246 DC : DRAFT MAY 2004
|
ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
ISO 11125-3:1993
|
Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness |
BS ISO 18203:2016
|
Steel. Determination of the thickness of surface-hardened layers |
13/30271610 DC : 0
|
BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
BS 3900-E14(1997) : 1997 AMD 16870
|
METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
BIS IS 1501-3 : 2013
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
AWS D3.6M : 2010
|
UNDERWATER WELDING CODE |
BS EN ISO 10477:2004
|
Dentistry. Polymer-based crown and bridge materials |
EN ISO 11125-3:1997
|
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) |
BS EN ISO 13397-1:1996
|
Periodontal curettes, dental scalers and excavators General requirements |
BS EN ISO 6507-3:2005
|
Metallic materials. Vickers hardness test Calibration of reference blocks |
BS EN 843-4:2005
|
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
BS EN 1043-1:1996
|
Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
BS EN 1653:1998
|
Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
EN 1172:2011
|
Copper and copper alloys - Sheet and strip for building purposes |
EN 50109-2-5:1995
|
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
DIN EN 843-4:2005-08
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
DIN EN ISO 4516:2002-10
|
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
ONORM EN ISO 6507-1 : 2006
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |