13/30265681 DC : 0
|
BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD |
SAE J 2551/2 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
07/30175157 DC : DRAFT DEC 2007
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
DIN ISO 12151-3 E : 2012
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS (ISO 12151-3:2010) |
09/30194969 DC : 0
|
BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ISO 11237:2017
|
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
03/311277 DC : DRAFT JAN 2004
|
ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
BS ISO 1436:2017
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
07/30175126 DC : DRAFT DEC 2007
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 12151-5:2007
|
Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends |
ISO 13971:2012
|
Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes — Requirements and classification |
ISO 12151-1:2010
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
SAE J 533 : 2017
|
FLARES FOR TUBING |
SAE J 2593 : 2015
|
INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
PD ISO/TR 10771-2:2008
|
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
DIN EN 1736:2009-02
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - FLEXIBLE PIPE ELEMENTS, VIBRATION ISOLATORS, EXPANSION JOINTS AND NON-METALLIC TUBES - REQUIREMENTS, DESIGN AND INSTALLATION |
EN ISO 19879:2010
|
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
09/30202316 DC : 0
|
BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
03/311096 DC : DRAFT DEC 2003
|
ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
16/30335320 DC : 0
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 12151-6:2009
|
Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends |
07/30163197 DC : 0
|
BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
16/30335329 DC : 0
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
UNI ISO 12151-6 : 2012
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
03/311275 DC : DRAFT DEC 2003
|
ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
07/30163202 DC : 0
|
BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
SAE J 1065 : 2016
|
NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
BS ISO 4079:2017
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
ISO 4079:2017
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
UNI ISO 12151-5 : 2012
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS |
ISO 12151-5:2007
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
BS ISO 12151-1 : 2010
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
ISO 10771-1:2015
|
Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method |
DIN EN ISO 19879 E : 2011
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
UNE-EN ISO 19879:2010
|
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
BS EN 1736:2008
|
Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements, design and installation |
I.S. EN ISO 19879:2010
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
UNI ISO 12151-3 : 2012
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
ISO/TR 10771-2:2008
|
Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
03/311322 DC : DRAFT JAN 2004
|
ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
BS ISO 10771-1:2015
|
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Test method |
BS ISO 12151-3:2010
|
Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
BS ISO 1436-2:2005
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
NF EN ISO 19879 : 2010
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
07/30175122 DC : DRAFT DEC 2007
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ONORM EN ISO 19879 : 2010
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
SAE J 2551/1 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
SAE J 1677 : 2016
|
TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
CSA HGV 4.10 : 2012
|
STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
ISO 12151-6:2009
|
Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
ISO 12151-4:2007
|
Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
UNI EN 1736 : 2009
|
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non- metallic tubes - Requirements, design and installation |
03/110806 DC : DRAFT JUNE 2003
|
BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
ISO/TS 17165-2:2018
|
Hydraulic fluid power Hose assemblies Part 2: Practices for hydraulic hose assemblies |
SAE J 2614 : 2018
|
WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
BS ISO 3862:2009
|
Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
BS ISO 4079-2:2005
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
BS ISO 13971:2012
|
Refrigeration systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements and classification |
10/30230621 DC : 0
|
BS ISO 13971 - REFRIGERATION SYSTEMS AND HEAT PUMPS - FLEXIBLE PIPE ELEMENTS, VIBRATION ISOLATORS, EXPANSION JOINTS AND NON-METALLIC TUBES - REQUIREMENTS AND CLASSIFICATION |
16/30335326 DC : 0
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
08/30175649 DC : DRAFT APR 2008
|
BS EN 1736 - REFRIGERATING SYSTEMS AND HEAT PUMPS - FLEXIBLE PIPE ELEMENTS, VIBRATION ISOLATORS, EXPANSION JOINTS AND NON-METALLIC TUBES - REQUIREMENTS, DESIGN AND INSTALLATION |
ISO 4079-2:2005
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
SAE J 2551 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
SAE J 2551/3 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
ISO 11237-2:2006
|
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
SAE J 2613 : 2017
|
WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
ISO 3862-2:2005
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
ISO 1436:2017
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
ISO 19879:2010
|
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
EN 1736:2008
|
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation |
04/30108943 DC : 0
|
|
BS ISO 12151-4:2007
|
Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends |
ISO 12151-3:2010
|
Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
NF ISO 12151-1 : 2010 AMD 1 2017
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
NF ISO 12151-6 : 2009
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS |
UNI EN ISO 19879 : 2011
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
BS ISO 11237-2:2006
|
Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
UNI ISO 12151-4 : 2012
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS |
ISO 3862:2017
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
SAE J 343 : 2017
|
TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
NF ISO 12151-3 : 2010
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
DIN EN ISO 19879:2011-01
|
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
ISO 1436-2:2005
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
BS EN ISO 19879:2010
|
Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections |
DIN ISO 12151-3:2012-08
|
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |