Skip to content
Please enter a keyword to search

  • ISO 7005-3:1988

    Current The latest, up-to-date edition.

    Metallic flanges Part 3: Copper alloy and composite flanges

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  18-02-1988

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies requirements for circular flanges of series 1 and 2. It also specifies the types of flanges and their facings,dimensions, tolerances, bolt sizes (including copper alloy), flange face surface finish, marking, testing, insperation and materials. An annex includes application and installation.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO 2441, 2229, 2084 (04/2001)
    Document Type Standard
    Product Note THIS STANDARD ALSO REFERS TO ANSI B 16.24
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    95/700349 DC : DRAFT FEB 95 DRAFT STANDARD FOR FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED PT 3. COPPER ALLOY AND COMPOSITE FLANGES
    BS EN ISO 4064-4:2014 Water meters for cold potable water and hot water Non-metrological requirements not covered in ISO 4064-1
    17/30363953 DC : 0 BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    ISO 17602:2014 Ships and marine technology Metal valves for use in flanged pipe Face-to-face and centre-to-face dimensions
    05/30134037 DC : 0 EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
    BS ISO 9635-1:2014 Agricultural irrigation equipment. Irrigation valves General requirements
    BS EN 60534-3-2:2001 Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves
    16/30345752 DC : 0 BS EN 12516-4:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    DIN EN ISO 4064-4:2014-11 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    06/30139629 DC : 0 EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY
    04/30126822 DC : 0 EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    07/30163662 DC : 0 BS EN 778 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    00/107336 DC : DRAFT OCT 2000 PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D
    93/706481 DC : 0 ISO/DIS 5752 - METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - FACE-TO-FACE AND CENTRE TO FACE DIMENSIONS
    API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    17/30332894 DC : 0 BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    NF EN 777-4 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    DIN EN 416-1:2009-09 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    DIN EN 777-1:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    DIN EN 777-3:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    DIN EN 777-4:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    BS EN 1490:2000 Building valves. Combined temperature and pressure relief valves. Tests and requirements
    BS EN 13828:2003 Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
    UNE-EN 525:2010 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    BS EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
    BS EN 1567 : 2000 BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS
    BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
    BS EN 419-1:2009 Non-domestic gas-fired overhead luminous radiant heaters Safety
    BS EN 1489:2000 Building valves. Pressure safety valves. Tests and requirements
    ISO 4064-4:2014 Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
    EN 12669:2000 DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
    EN 12094-5:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
    DIN EN 13828:2003-12 BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
    DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 13443-1:2002+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
    DIN EN ISO 4064-2:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
    EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks
    DIN EN ISO 16330:2004-08 Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)
    05/30135987 DC : 0 EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
    PREN 416 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    04/30031093 DC : DRAFT FEB 2004 ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
    09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
    I.S. EN 12514-1:2000 INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS
    I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    06/30148043 DC : 0 EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
    PREN 17175 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
    EN 1488:2000 Building valves - Expansion groups - Tests and requirements
    BS 4504-3.1:1989 Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
    BS ISO 10631:2013 Metallic butterfly valves for general purposes
    11/30249111 DC : 0 BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    BS 7977-2:2003 Specification for safety and rational use of energy of domestic gas appliances Combined appliances. Gas fire/back boiler
    07/30163658 DC : 0 BS EN 621 - NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNE-EN ISO 4064-2:2015 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
    04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    09/30202310 DC : 0 BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
    PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    NF ISO 4064-1 : 1994 MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS - METERS FOR COLD POTABLE WATER - PART 1: SPECIFICATIONS
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 12516-4:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    ASTM F 2015 : 2000 Standard Specification for Lap Joint Flange Pipe End Applications
    EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
    NF EN 777-2 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    NF EN 777-3 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    DIN EN 1020:2010-05 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    DIN EN 1319:2010-06 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system
    BS EN 13443-1:2002 Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing
    BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
    13/30231511 DC : 0 BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
    I.S. EN 12669:2000 DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
    I.S. EN 1092-3:2003 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN 12094-5:2006 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS
    I.S. EN 303-1:2017 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    I.S. EN ISO 9908:1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    I.S. EN 13443-1:2002 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
    I.S. EN ISO 5199:2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
    05/30138208 DC : DRAFT AUG 2005 ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
    BS 2782-11.1132(1992) : 1992 METHODS OF TESTING PLASTICS - THERMOPLASTICS VALVES - FATIGUE STRENGTH - TEST METHOD
    12/30236280 DC : 0 BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
    12/30236609 DC : 0 BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1
    UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    PREN 12516-4 : DRAFT 2011 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    DIN ISO 9908:1998-04 CENTRIFUGAL PUMPS - TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    13/30271350 DC : 0 BS ISO 17602 - SHIPS AND MARINE TECHNOLOGY - METAL VALVES FOR USE IN FLANGED PIPE - FACE TO FACE AND CENTRE TO FACE DIMENSIONS
    14/30283312 DC : 0 BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES
    10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    07/30163042 DC : DRAFT AUG 2007 BS EN 1319 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    OIML R 49-2 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
    DIN EN 13443-1:2007-12 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
    NF EN 777-1 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    BS EN ISO 9905 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
    BS EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    BS EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    UNE-EN 14154-1:2005 Water meters - Part 1: General requirements
    I.S. EN 777-4:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    I.S. EN 525:2009 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    I.S. EN 777-2:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    I.S. EN 416-1:2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    I.S. EN 777-3:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    I.S. EN 1319:2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    I.S. EN 419-1:2009 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
    I.S. EN 621:2009 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    I.S. EN 778:2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    I.S. EN 1020:2009 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    I.S. EN 777-1:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    I.S. EN 1491:2000 BUILDING VALVES - EXPANSION VALVES - TESTS AND REQUIREMENTS
    UNI EN 416-1 : 2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
    UNI EN 778 : 2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNI EN 777-4 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    UNI EN 1020 : 2009 NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    UNI EN ISO 9905 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
    UNI EN ISO 9908 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    UNI EN 14154-1 : 2011 WATER METERS - PART 1: GENERAL REQUIREMENTS
    UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
    UNI EN 1319 : 2010 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    UNI EN 621 : 2010 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNI EN 525 : 2009 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    UNI EN ISO 15783 : 2009 Seal-less rotodynamic pumps - Class II - Specification
    UNI EN 777-1 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    UNI EN 777-2 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    UNI EN 419-1 : 2009 NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    UNI EN 777-3 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    DIN EN ISO 4064-4 E : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    DIN EN 303-1:2016-07 (Draft) HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    CSA C900.2 : 2013 HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
    BS 6448:1995 Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
    16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
    07/30160488 DC : DRAFT FEB 2007 BS EN 13443-1 AMD 1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
    05/30127266 DC : DRAFT JAN 2005 EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
    BS 7784(1994) : 1994 AMD 9864 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I
    I.S. EN 1488:2000 BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS
    I.S. EN 12516-4:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
    BS ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter greater than 63mm
    07/30163039 DC : DRAFT AUG 2007 BS EN 1020 - NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    09/30204183 DC : 0 BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR
    07/30163045 DC : DRAFT AUG 2007 BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    04/30031075 DC : DRAFT FEB 2004 ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
    UNI EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    I.S. EN ISO 4064-4:2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    UNE-EN 12516-4:2016 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
    I.S. EN 60534-5:2004 INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
    I.S. EN ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    DIN EN ISO 4064-2:2016-09 (Draft) WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    ISO 10931-4:1997 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Part 4: Valves
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    17/30363959 DC : 0 BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    IEC 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
    ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
    NF EN 416-1 : 2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    DIN EN 525:2009-11 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    DIN EN 778:2010-03 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
    BS EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    BS EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
    BS EN 12669:2000 Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating
    BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
    BS EN 1488:2000 Building valves. Expansion groups. Tests and requirements
    BS EN ISO 9908 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    BS EN ISO 16330:2003 Reciprocating positive displacement pumps and pump units. Technical requirements
    BS EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety
    BS EN 656:2000 Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
    ISO 15783:2002 Seal-less rotodynamic pumps — Class II — Specification
    BS EN 12094-5:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators
    BS EN ISO 14847:1999 Rotary positive displacement pumps. Technical requirements
    BS EN 28659:1992 Thermoplastics valves. Fatigue strength. Test method
    ISO 4064-2:2014 Water meters for cold potable water and hot water Part 2: Test methods
    BS EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety
    BS EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety
    UNE-EN 1020:2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    ISO 5199:2002 Technical specifications for centrifugal pumps — Class II
    BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    UNE-EN ISO 4064-4:2015 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014)
    BS EN 14154-1 : 2005 WATER METERS - PART 1: GENERAL REQUIREMENTS
    BS EN 12514-1:2000 Installations for oil supply systems for oil burners Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks
    ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
    ISO 16330:2003 Reciprocating positive displacement pumps and pump units Technical requirements
    ISO 9908:1993 Technical specifications for centrifugal pumps — Class III
    BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
    UNE-EN 778:2010 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
    BS EN 303-4:1999 Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking
    EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use
    EN ISO 9908:1997/A1:2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)
    EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
    EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
    EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
    EN 13280:2001 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
    EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
    EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
    EN 13828:2003 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
    EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements
    EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
    EN ISO 16330 : 2003 RECIPROCATING POSITIVE DISPLACEMENT PUMPS AND PUMP UNITS - TECHNICAL REQUIREMENTS
    EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
    EN ISO 5199 : 2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
    EN 28659:1990 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989)
    EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    EN 1567:1999 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
    EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
    EN 1491:2000 Building valves - Expansion valves - Tests and requirements
    EN 656:1999/A1:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW BUT NOT EXCEEDING 300 KW
    EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
    EN 419-1:2009 Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety
    EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
    EN ISO 15783:2003/A1:2008 Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
    EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
    EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
    EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
    UNI EN 656 : 2008 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 300 KW
    API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    UNI CEI EN ISO 4064-4 : 2014 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1
    13/30271601 DC : 0 BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
    00/705373 DC : DRAFT FEB 2000 PREN 13836 - GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW BUT NOT EXCEEDING 1000 KW
    BS ISO 17602:2014 Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-to-face dimensions
    06/30139635 DC : 0 EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY
    BS 7736(1994) : 1994 AMD 9865 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS III
    06/30139641 DC : 0 EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    BS EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
    ISO 10385-1:2000 Measurement of water flow in closed conduits Meters for hot water Part 1: Specifications
    ISO 9635-1:2014 Agricultural irrigation equipment Irrigation valves Part 1: General requirements
    ONORM EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    ISO 10631:2013 Metallic butterfly valves for general purposes
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ASTM F 2015 : 2000 : R2006 Standard Specification for Lap Joint Flange Pipe End Applications
    ASTM F 2015 : 2000 : R2013 Standard Specification for Lap Joint Flange Pipe End Applications
    ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
    NF EN 419-1 : 2009 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    DIN EN 777-2:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    DIN EN 419-1:2009-07 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
    BS EN ISO 5199:2002 Technical specifications for centrifugal pumps. Class II
    BS EN ISO 15783 : 2003 SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION
    BS EN 1491:2000 Building valves. Expansion valves. Tests and requirements
    BS EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
    BS EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety
    UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN 303-1:2017 Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
    DIN EN 12514-1:2009-06 (Draft) INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS
    DIN EN 621:2010-04 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    DIN EN ISO 5199:2003-12 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
    EN 14154-1:2005+A2:2011 Water meters - Part 1: General requirements
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 14154-1:2011-06 WATER METERS - PART 1: GENERAL REQUIREMENTS
    EN 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
    DIN EN ISO 15783:2010-04 Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective