ISO 719:1985
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
14-09-2020
Superseded by
Language(s)
English, French
Published date
03-10-1985
Important note : Users cannot be edited or removed once added to your Multi user PDF.
The principle, reagents, apparatus and procedure are specified. The resistance is expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass. For five classes of grain the limit values in the test are listed.
| DevelopmentNote |
Also numbered as BS 3473-2(1987) (07/2005)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 719 : 1986 | Identical |
| BIS IS 2303-1-1 : 2012(R2017) | Identical |
| UNE 43708:1975 | Identical |
| PN ISO 719 : 1994 | Identical |
| NEN ISO 719 : 1986 | Identical |
| DIN 12111:1976-05 | Similar to |
| DIN ISO 719:1989-12 | Identical |
| UNE 400322:1999 | Identical |
| 03/106304 DC : DRAFT APR 2003 | BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK BOTTLES FOR SYRUPS |
| BS ISO 3819:1985 | Laboratory glassware. Beakers |
| 15/30314949 DC : 0 | BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS |
| DIN 7081:1999-05 | PRESSURE RESISTANT OBLONG SIGHT GLASSES OF BOROSILICATE GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE |
| 15/30314886 DC : 0 | BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING GLASS BOTTLES |
| 15/30315528 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
| NF EN ISO 13079 : 2011 | LABORATORY GLASS AND PLASTICS WARE - TUBES FOR THE MEASUREMENT OF THE ERYTHROCYTE SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| I.S. EN ISO 648:2008 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
| DIN EN ISO 13079:2011-10 | Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method (ISO 13079:2011) |
| 03/106303 DC : DRAFT APR 2003 | BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING BOTTLES |
| 09/30178946 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
| 02/703683 DC : DRAFT FEB 2002 | |
| 09/30178949 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
| PREN ISO 13079 : DRAFT 2010 | LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| BS 7709-3:1993 | Analysis of extract solutions of glass Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
| BS ISO 4802-1:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
| BS 7709-5:1993 | Analysis of extract solutions of glass Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
| 02/205170 DC : DRAFT APR 2002 | ISO/CD 17884 - SHIP AND MARINE TECHNOLOGY - NAVIGATION - SEARCHLIGHTS FOR HIGH SPEED CRAFT |
| BS 7709-1:1993 | Analysis of extract solutions of glass Method for determination of silicon dioxide by molecular absorption spectrometry |
| 06/30153191 DC : 0 | BS EN 15542 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| BS ISO 17884:2004 | Ships and marine technology. Navigation. Searchlights for high-speed craft |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| CEI EN 60811-405 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
| NF EN ISO 8362-1 : 2010 AMD 1 2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING |
| DIN EN 12470-1:2009-11 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| BS EN ISO 4788:2005 | Laboratory glassware. Graduated measuring cylinders |
| BS EN ISO 8362-1 : 2009 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009) |
| DIN EN ISO 4142:2003-01 | LABORATORY GLASSWARE - TEST TUBES |
| DIN ISO 12772:2007-06 | Laboratory glassware - Disposable microhaematocrit capillary tubes (ISO 12772:1997) |
| DIN EN ISO 648:2009-01 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 12470-1:2000+A1:2009 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| ONORM EN ISO 13132 : 2011 | LABORATORY GLASSWARE - PETRI DISHES (ISO 13132:2011) |
| BS EN ISO 13132:2011 | Laboratory glassware. Petri dishes |
| 03/106306 DC : DRAFT APR 2003 | BS ISO 11418-4 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 4: TABLET BOTTLES |
| BS EN 60811-3-2:1995 | Insulating and sheathing materials of electric cables. Common test methods Methods specific to PVC compounds - Loss of mass test. Thermal stability test |
| 06/30146953 DC : DRAFT FEB 2006 | ISO 835 - LABORATORY GLASSWARE - GRADUATED PIPETTES |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| ISO 4798:1997 | Laboratory glassware — Filter funnels |
| BS ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations Drop-dispensing glass bottles |
| I.S. EN 60811-405:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS (IEC 60811-405:2012 (EQV)) |
| UNE-EN ISO 13079:2011 | Laboratory glass and plastics ware. Tubes and support for the measurement of erythrocytic sedimentation rate by the Westergren method (ISO 13079:2011) |
| UNI EN 15542 : 2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| 15/30314850 DC : 0 | BS ISO 11418-7 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 7: SCREW-NECK VIALS MADE OF GLASS TUBING FOR LIQUID DOSAGE FORMS |
| BS 3473-1:1985 | Chemical resistance of glass used in the production of laboratory glassware Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali |
| BS 7709-6:1993 | Analysis of extract solutions of glass Method for determination of boron (III) oxide by molecular absorption spectrometry |
| BS EN 60811-405:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
| ISO 8362-1:2009 | Injection containers and accessories Part 1: Injection vials made of glass tubing |
| I.S. EN ISO 8536-1:2011 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES (ISO 8536-1:2011) |
| DIN 53177:2002-11 | BINDERS FOR PAINTS AND VARNISHES - MEASUREMENT OF THE DYNAMIC VISCOSITY OF LIQUID RESINS; RESIN SOLUTIONS AND OILS BY THE CAPILLARY VISCOSIMETER OF ISOCELSES TYPE ACCORDING TO UBBELOHDE |
| DIN 53125:2004-03 | DETERMINING THE CHLORIDE CONTENT OF AQUEOUS EXTRACTS OF PAPER AND BOARD |
| I.S. EN ISO 8362-4:2011 | INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS (ISO 8362-4:2011) |
| I.S. EN 12470-1:2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| BS 2598-1:1991 | Glass plant, pipeline and fittings Specification for properties of borosilicate glass 3.3 |
| BS ISO 3507:1999 | Laboratory glassware. Pyknometers |
| UNI EN ISO 13132 : 2011 | LABORATORY GLASSWARE - PETRI DISHES |
| BS ISO 7348:1992 | Glass containers. Manufacture. Vocabulary |
| ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles |
| ISO 11418-3:2016 | Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms |
| BS ISO 4802-2:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification |
| BS ISO 11418-3 : 2016 | CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| BS ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations Tablet glass bottles |
| ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Part 7: Screw-neck vials made of glass tubing for liquid dosage forms |
| BS 7709-4:1993 | Analysis of extract solutions of glass Method for determination of aluminium oxide by molecular absorption spectrometry |
| BS EN ISO 13079:2011 | Laboratory glass and plastics ware. Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method |
| 10/30204619 DC : 0 | BS EN ISO 13079 - LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| PREN ISO 13132 : DRAFT 2010 | LABORATORY GLASSWARE - PETRI DISHES |
| BIS IS/ISO 4803 : 1978 | LABORATORY GLASSWARE - BOROSILICATE GLASS TUBING |
| ISO 17884:2004 | Ships and marine technology — Searchlights for high-speed craft |
| ISO 4785:1997 | Laboratory glassware — Straight-bore glass stopcocks for general purposes |
| DIN EN ISO 8362-1:2016-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009 + AMD 1:2015) |
| ISO 11418-2:2016 | Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups |
| ISO 4795:1996 | Glass for thermometer bulbs |
| DIN EN 1595:1997-05 | PRESSURE EQUIPMENT MADE FROM BOROSILICATE GLASS 3.3 - GENERAL RULES FOR DESIGN, MANUFACTURE AND TESTING |
| UNE-EN ISO 8362-4:2012 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| BS EN ISO 835:2007 | Laboratory glassware. Graduated pipettes |
| ISO 13079:2011 | Laboratory glass and plastics ware — Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method |
| ISO 13132:2011 | Laboratory glassware — Petri dishes |
| EN ISO 385:2005 | Laboratory glassware - Burettes (ISO 385:2005) |
| EN ISO 4788:2005 | Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
| UNI EN ISO 8536-1 : 2011 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES |
| UNI EN 12470-1 : 2009 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| BS 1751:1997 | Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes |
| UNI EN ISO 8362-4 : 2011 | INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS |
| DIN EN 15542:2008-06 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| BIS IS 915 : 2012 | LABORATORY GLASSWARE - ONE-MARK VOLUMETRIC FLASKS |
| BS ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Screw-neck vials made of glass tubing for liquid dosage forms |
| I.S. EN ISO 13079:2011 | LABORATORY GLASS AND PLASTICS WARE - TUBES FOR THE MEASUREMENT OF THE ERYTHROCYTE SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles |
| BS 2734:1984 | Specification for boiling flasks (narrow-necked), conical, flat bottom and round bottom |
| BS ISO 12772:1997 | Laboratory glassware. Disposable microhaematocrit capillary tubes |
| 10/30204625 DC : 0 | BS ISO 13132 - LABORATORY GLASSWARE - PETRI DISHES |
| 03/314897 DC : DRAFT SEP 2003 | ISO 4788 - LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS |
| 10/30219700 DC : 0 | BS ISO 13079 - LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| 03/106305 DC : DRAFT APR 2003 | BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| BS 7709-2:1993 | Analysis of extract solutions of glass Method for determination of sodium oxide and potassium oxide by flame spectrometric methods |
| UNI EN ISO 648 : 2009 | LABORATORY GLASSWARE - SINGLE-VOLUME PIPETTES |
| 07/30163410 DC : 0 | BS ISO 648 - LABORATORY GLASSWARE - SINGLE VOLUME PIPETTES |
| ISO 4802-1:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
| BS ISO 1042 : 98 AMD 10633 | LABORATORY GLASSWARE - ONE-MARK VOLUMETRIC FLASKS |
| BS ISO 4798:1997 | Laboratory glassware. Filter funnels |
| BS ISO 3585:1998 | Borosilicate glass 3.3. Properties |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| UNE-EN ISO 13132:2011 | Laboratory glassware - Petri dishes (ISO 13132:2011) |
| UNI EN ISO 13079 : 2011 | LABORATORY GLASS AND PLASTICS WARE - TUBES FOR THE MEASUREMENT OF THE ERYTHROCYTE SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| BS ISO 11418-2 : 2016 | CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS |
| AWWA C203 : 2015 | COAL-TAR PROTECTIVE COATINGS AND LININGS FOR STEEL WATER PIPE |
| UNE-EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| ISO 4802-2:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification |
| I.S. EN 15542:2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 8536-1:2011-12 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| DIN EN ISO 8362-4:2011-12 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| ISO 835:2007 | Laboratory glassware — Graduated pipettes |
| BS EN ISO 4142:2002 | Laboratory glassware. Test tubes |
| BS EN 28362-4:1993 | Injection containers for injectables and accessories Injection vials made of moulded glass |
| BS EN ISO 1042:2000 | Laboratory glassware. One-mark volumetric flasks |
| UNE-EN ISO 8536-1:2012 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
| IEC 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| BS EN ISO 8536-1:2011 | Infusion equipment for medical use Infusion glass bottles |
| BS EN ISO 8362-4:2011 | Injection containers and accessories Injection vials made of moulded glass |
| ISO 385:2005 | Laboratory glassware — Burettes |
| ISO 8362-4:2011 | Injection containers and accessories Part 4: Injection vials made of moulded glass |
| ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
| ISO 8536-1:2011 | Infusion equipment for medical use Part 1: Infusion glass bottles |
| EN ISO 13132:2011 | Laboratory glassware - Petri dishes (ISO 13132:2011) |
| EN ISO 4142:2002 | Laboratory glassware - Test tubes (ISO 4142:2002) |
| EN ISO 648:2008 | Laboratory glassware - Single-volume pipettes (ISO 648:2008) |
| EN ISO 8362-4:2011 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| EN ISO 4796-2:2000 | Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000) |
| EN ISO 13079:2011 | Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method (ISO 13079:2011) |
| EN ISO 835:2007 | Laboratory glassware - Graduated pipettes (ISO 835:2007) |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| EN 1595:1997 | Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing |
| EN ISO 8536-1:2011 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| DIN EN ISO 13132:2011-10 | Laboratory glassware - Petri dishes (ISO 13132:2011) |
| BS ISO 11418-5:2015 | Containers and accessories for pharmaceutical preparations Dropper assemblies |
| 15/30315525 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
| 09/30192982 DC : DRAFT JAN 2009 | BS EN 60811-405 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: ENVIRONMENTAL TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
| 15/30314952 DC : 0 | BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| ISO 12772:1997 | Laboratory glassware — Disposable microhaematocrit capillary tubes |
| BS ISO 12775:1997 | Guidelines on types of glass of normal bulk-production composition and their test methods |
| BS EN ISO 648:2008 | Laboratory glassware. Single-volume pipettes |
| NF EN ISO 13132 : 2011 | LABORATORY GLASSWARE - PETRI DISHES |
| ISO 4142:2002 | Laboratory glassware — Test tubes |
| BS ISO 4795:1996 | Laboratory glassware. Glass for thermometer bulbs |
| BIS IS 2303-1-2 : 2012(R2017) | GRADING GLASS - PART 1: METHOD OF TEST AND CLASSIFICATION - SECTION 2: HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C |
| ISO 1135-1:1987 | Transfusion equipment for medical use Part 1: Glass transfusion bottles, closures and caps |
| I.S. EN ISO 13132:2011 | LABORATORY GLASSWARE - PETRI DISHES |
| ISO 5256:1985 | Steel pipes and fittings for buried or submerged pipe lines External and internal coating by bitumen or coal tar derived materials |
| ISO 11418-5:2015 | Containers and accessories for pharmaceutical preparations Part 5: Dropper assemblies |
| I.S. EN 60811-3-2:1997 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
| I.S. EN ISO 8362-1:2009 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009) |
| ISO 4796-2:2000 | Laboratory glassware — Bottles — Part 2: Conical neck bottles |
| BS EN 12470-1 : 2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| BS EN ISO 385:2005 | Laboratory glassware. Burettes |
| EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| DIN 7079-1:1999-05 | PRESSURE RESISTANT CIRCULAR GLASS-TO-METAL FUSED SIGHT GLASSES - PART 1: FOR HOLDERS WITH RECESS |
| DIN EN ISO 385:2005-07 | Laboratory glassware - Burettes (ISO 385:2005); German version EN ISO 385:2005 |
| DIN EN ISO 4788:2005-08 | Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
| DIN ISO 3507:2002-02 | LABORATORY GLASSWARE - PYKNOMETERS |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 60811-3-2 : 95 AMD 2 2004 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
| UNE-EN ISO 8362-1:2010 | Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009) |
| ISO 385-2:1984 | Laboratory glassware Burettes Part 2: Burettes for which no waiting time is specified |
| ISO 720:1985 | Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
| ISO 3819:2015 | Laboratory glassware — Beakers |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 1773:1997 | Laboratory glassware — Narrow-necked boiling flasks |
| ISO 385-1:1984 | Laboratory glassware — Burettes — Part 1: General requirements |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.