ISO 80000-9:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Quantities and units Part 9: Physical chemistry and molecular physics
Amended by
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Withdrawn date
27-08-2019
Superseded by
Published date
02-04-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 80000-9:2009 gives names, symbols, and definitions for quantities and units of physical chemistry and molecular physics. Where appropriate, conversion factors are also given.
| DevelopmentNote |
Supersedes ISO 31-8. (04/2009) DRAFT ISO/DIS 80000-9 is also available for this standard. (11/2016)
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS Z 8000-9:2015 | Identical |
| ONORM EN ISO 80000-9 : 2014 | Identical |
| NF EN ISO 80000-9 : 2013 | Identical |
| NBN EN ISO 80000-9 : 2013 | Identical |
| NEN EN ISO 80000-9 : 2013 | Identical |
| NS EN ISO 80000-9 : 2013 | Identical |
| I.S. EN ISO 80000-9:2013 | Identical |
| PN EN ISO 80000-9 : 2013 | Identical |
| SN EN ISO 80000-9 : 2013 | Identical |
| UNI CEI EN ISO 80000-9 : 2013 | Identical |
| SS-EN ISO 80000-9:2013 | Identical |
| BIS IS/ISO 80000-9 : 2009 | Identical |
| UNE-EN ISO 80000-9:2014 | Identical |
| BS EN ISO 80000-9 : 2013 | Identical |
| CEI UNI ISO 80000-9 : 2010 | Identical |
| CEI UNI EN ISO 80000-9 : 1ED 2013 | Identical |
| EN ISO 80000-9:2013 | Identical |
| DIN EN ISO 80000-9:2013-08 | Identical |
| BS EN ISO 80000-9:2013+A1:2011 | Identical |
| UNI CEI ISO 80000-9 : 2010 | Identical |
| NEN ISO 80000-9 : 2009 AMD 1 2011 | Identical |
| NF ISO 80000-9 : 2009 AMD 1 2011 | Identical |
| UNI CEI ISO 80000-12 : 2010 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| BS ISO 25597:2013 | Stationary source emissions. Test method for determining PM<sub>2,5</sub> and PM<sub>10</sub> mass in stack gases using cyclone samplers and sample dilution |
| PD ISO/TS 17518:2015 | Medical laboratories. Reagents for staining biological material. Guidance for users |
| DIN EN ISO 27971:2015-11 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| DIN EN ISO 80000-1:2013-08 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| 16/30297082 DC : 0 | BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| UNE-EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| BS IEC 60050-113:2011 | International electrotechnical vocabulary Physics for electrotechnology |
| ISO/TS 17518:2015 | Medical laboratories — Reagents for staining biological material — Guidance for users |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| OIML R 143 : 2009 | INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS |
| I.S. EN ISO 80000-1:2013 | QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011) |
| BS ISO 7504:2015 | Gas analysis. Vocabulary |
| BIS IS/ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNI CEI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
| ASTM F 1925 : 2017 : REDLINE | Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
| EN 80000-14:2009 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| EN ISO 19001:2013 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013) |
| CEI UNI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| NF ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNE-EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| ISO 25597:2013 | Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| BS EN ISO 80000-11:2013 | Quantities and units Characteristic numbers |
| UNI CEI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| UNI EN ISO 19001 : 2013 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY |
| 16/30337558 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
| 12/30230597 DC : 0 | BS ISO 25597 - STATIONARY SOURCE EMISSIONS - TEST METHOD FOR DETERMINING PM2,5 AND PM10 MASS IN STACK GASES USING CYCLONE SAMPLERS AND SAMPLE DILUTION |
| CEI UNI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
| BS ISO 19396-2:2017 | Paints and varnishes. Determination of pH value pH electrodes with ISFET technology |
| NF EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| 15/30309731 DC : 0 | BS ISO 19396-1 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 1: PH ELECTRODES WITH GLASS MEMBRANE |
| I.S. EN 2032-001:2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| ISO 7504:2015 | Gas analysis Vocabulary |
| ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| BS EN ISO 80000-10:2013 | Quantities and units Atomic and nuclear physics |
| IEC 60050-113:2011 | International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| BS EN ISO 27971:2015 | Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| NF ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| UNI CEI EN ISO 80000-12 : 2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| BS EN ISO 19001:2013 | In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| 17/30334065 DC : 0 | BS EN ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| BS ISO 10523 : 2008 | WATER QUALITY - DETERMINATION OF PH |
| DIN EN ISO 80000-12:2015-11 (Draft) | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
| UNI CEI EN ISO 80000-11 : 2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| BS ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| BS IEC 62957-1:2017 | Radiation protection instrumentation. Semi-empirical method for performance evaluation of detection and radionuclide identification Performance evaluation of the instruments, featuring radionuclide identification in static mode |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| BIS IS/ISO 80000-11 : 2008 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| I.S. EN ISO 10523:2012 | WATER QUALITY - DETERMINATION OF PH (ISO 10523:2008) |
| UNE-IEC 60050-113:2012 | International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology |
| PREN 2032-001 : 200P5 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| I.S. EN ISO 19001:2013 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013) |
| IEC 62957-1:2017 | Radiation protection instrumentation - Semi-empirical method for performance evaluation of detection and radionuclide identification - Part 1: Performance evaluation of the instruments, featuring radionuclide identification in static mode |
| I.S. EN ISO 80000-5:2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007) |
| UNI CEI ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| BS EN ISO 80000-12:2013 | Quantities and units Solid state physics |
| EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| UNI EN ISO 10523 : 2012 | WATER QUALITY - DETERMINATION OF PH |
| BIS IS/ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| ONORM EN ISO 80000-11 : 2014 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
| UNI CEI ISO 80000-11 : 2009 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| DIN EN ISO 80000-11:2013-08 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| 14/30288436 DC : 0 | BS EN ISO 27971 - CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPHIC PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY |
| BS EN ISO 10523:2012 | Water quality. Determination of pH |
| 06/30126364 DC : 0 | IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| 10/30233903 DC : 0 | BS EN 60050-114 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 114: ELECTROCHEMISTRY (PROPOSED HORIZONTAL STANDARD) |
| 12/30218281 DC : 0 | BS ISO 80003-3 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 3: CHEMISTRY |
| BS EN 2032-001:2014 | Aerospace series. Metallic materials Conventional designation |
| BS ISO 80000-1 : 2009 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN 80000-14:2009 | Quantities and units Telebiometrics related to human physiology |
| IEEE/ASTM SI 10-2016 | American National Standard for Metric Practice |
| I.S. EN ISO 80000-12:2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
| UNI CEI EN ISO 80000-1 : 2013 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BIS IS/ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| UNI CEI EN ISO 80000-5 : 2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| UNI CEI EN ISO 80000-10 : 2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNE-EN ISO 80000-12:2014 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
| I.S. EN ISO 80000-10:2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| DIN EN ISO 80000-5:2016-02 (Draft) | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
| DIN EN ISO 80000-10:2016-09 (Draft) | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| ISO 19001:2013 | In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| IEC 80000-14:2008 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| ISO 80000-12:2009 | Quantities and units Part 12: Solid state physics |
| ISO 27971:2015 | Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| ISO 80000-10:2009 | Quantities and units Part 10: Atomic and nuclear physics |
| ISO 80000-11:2008 | Quantities and units Part 11: Characteristic numbers |
| EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| EN ISO 80000-12:2013 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
| EN 2032-001:2014 | Aerospace series - Metallic materials - Part 001: Conventional designation |
| EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| EN ISO 80000-5:2013 | Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| UNE-EN 80000-14:2011 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| 16/30343594 DC : 0 | BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| BIS IS/ISO 80000-7 : 2008 | QUANTITIES AND UNITS - PART 7: LIGHT |
| 15/30283700 DC : 0 | BS EN ISO 80000-12 - QUANTITIES AND UNITS - PART 12: CONDENSED MATTER PHYSICS |
| UNE-EN ISO 19001:2013 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013) |
| DIN EN ISO 10523:2012-04 | Water quality - Determination of pH (ISO 10523:2008) |
| UNI CEI ISO 80000-1 : 2010 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| 15/30309734 DC : 0 | BS ISO 19396-2 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 2: PH ELECTRODES WITH ISFET TECHNOLOGY |
| UNI EN 2032-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| BIS IS/IEC 80000-14 : 2008 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| BS ISO 19396-1:2017 | Paints and varnishes. Determination of pH value pH electrodes with glass membrane |
| 16/30320910 DC : 0 | BS IEC 62957-1 ED1.0 - RADIATION INSTRUMENTATION - SEMI-EMPIRICAL METHOD FOR PERFORMANCE EVALUATION OF DETECTION AND RADIONUCLIDE IDENTIFICATION - PART 1: PERFORMANCE EVALUATION OF THE INSTRUMENTS, FEATURING RADIONUCLIDE IDENTIFICATION IN STATIC MODE |
| BS EN ISO 80000-1:2013 | Quantities and units General |
| ISO 19396-2:2017 | Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology |
| DIN EN ISO 19001:2013-07 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013) |
| OIML R 144-1 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| ISO 19396-1:2017 | Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane |
| UNE-EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| I.S. EN ISO 27971:2015 | CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPH PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY (ISO 27971:2015) |
| I.S. EN 80000-14:2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| UNE-EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| DIN EN ISO 80000-10:2013-08 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| DIN SPEC 4002-102:2011-05 | PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |
| ISO 80000-4:2006 | Quantities and units Part 4: Mechanics |
| IEC 80000-6:2008 | Quantities and units - Part 6: Electromagnetism |
| ISO 80000-3:2006 | Quantities and units Part 3: Space and time |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 80000-10:2009 | Quantities and units Part 10: Atomic and nuclear physics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.