|
ISO 834-10:2014
|
Fire resistance tests Elements of building construction Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
|
BS ISO 30021:2013
|
PLASTICS - BURNING BEHAVIOUR - INTERMEDIATE-SCALE FIRE-RESISTANCE TESTING OF FIBRE-REINFORCED POLYMER COMPOSITES |
|
UNE-CEN ISO/TS 27469:2012 EX
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010) |
|
ISO 834-9:2003
|
Fire-resistance tests Elements of building construction Part 9: Specific requirements for non-loadbearing ceiling elements |
|
12/30258984 DC : 0
|
BS ISO 834-10 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL ELEMENTS |
|
BS EN 60439-2:2000
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
PD ISO/TR 10295-3:2012
|
FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 3: SINGLE COMPONENT PENETRATION SEALS - GUIDANCE ON THE CONSTRUCTION AND USE OF TEST CONFIGURATIONS AND SIMULATED SERVICES TO CHARACTERISE SEALING MATERIALS |
|
09/30194263 DC : 0
|
BS EN 61439-6 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
17/30363845 DC : 0
|
BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
|
BS EN ISO 2919:2014
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
ISO 30021:2013
|
Plastics Burning behaviour Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
|
ISO 6944-1:2008
|
Fire containment — Elements of building construction — Part 1: Ventilation ducts |
|
BS ISO/TR 12470:1998
|
FIRE RESISTANCE TESTS - GUIDANCE ON THE APPLICATION AND EXTENSION OF RESULTS |
|
97/544177 DC : DRAFT JAN 1998
|
ISO/DIS 14832-2 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 2: REQUIREMENTS FOR HORIZONTAL SEPARATING LOADBEARING ELEMENTS |
|
DD CEN ISO/TS 27469:2011
|
Petroleum, petrochemical and natural gas industries. Method of test for fire dampers |
|
10/30216811 DC : 0
|
BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
97/544178 DC : DRAFT JAN 1998
|
ISO/DIS 14832-3 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 3: REQUIREMENTS FOR BEAMS |
|
BS DD9999(2005) : 2005
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
|
06/30151123 DC : DRAFT JUN 2006
|
BS ISO 22899-1 - DETERMINATION OF THE RESISTANCE TO JET FIRES OF PASSIVE FIRE PROTECTION MATERIALS - GENERAL REQUIREMENTS |
|
ISO/TS 24679:2011
|
Fire safety engineering Performance of structures in fire |
|
ISO/TS 19880-1:2016
|
Gaseous hydrogen Fuelling stations Part 1: General requirements |
|
DIN EN 15254-4:2013-10
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
BS EN ISO 19901-3:2014
|
Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure |
|
ISO/TR 13387-6:1999
|
Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin |
|
ISO 16923:2016
|
Natural gas fuelling stations — CNG stations for fuelling vehicles |
|
CEI UNI EN 45545-3 : 2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 21927-1:2008
|
Smoke and heat control systems Part 1: Specification for smoke barriers |
|
ISO/IEC 18010:2002
|
Information technology Pathways and spaces for customer premises cabling |
|
17/30356734 DC : 0
|
BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
|
NF EN 61439-6 : 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
ASTM E 2748 : 2012 : REV A : R2017
|
Standard Guide for Fire-Resistance Experiments |
|
BS EN 12101-3:2015
|
Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
|
EN 12101-3:2015
|
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
|
CEN ISO/TS 27469:2011
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010) |
|
EN 60439-2:2000/A1:2005
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
BS 9999:2008
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS |
|
EN 45545-3:2013
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
BS 6203:2003
|
GUIDE TO FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF EXPANDED POLYSTYRENE MATERIALS (EPS AND XPS) USED IN BUILDING APPLICATIONS |
|
ISO 21927-2:2006
|
Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators |
|
I.S. EN ISO 14692-2:2017
|
PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017) |
|
BS ISO 12472:2003
|
FIRE RESISTANCE OF TIMBER DOOR ASSEMBLIES - METHOD OF DETERMINING THE EFFICACY OF INTUMESCENT SEALS |
|
ISO 834-7:2000
|
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
|
ASTM E 2748 : 2012
|
Standard Guide for Fire-Resistance Experiments |
|
17/30352210 DC : 0
|
BS ISO 21925-1 - FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: MECHANICAL DAMPERS |
|
DD ISO/TS 27469 : 2010
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS |
|
14/30300516 DC : 0
|
BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
|
03/104200 DC : DRAFT MAR 2003
|
BS XXXX - DETERMINATION OF THE RESISTANCE TO JET-FIRES OF PASSIVE FIRE PROTECTION MATERIALS |
|
PREN 45545-3 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
97/544176 DC : DRAFT JAN 1998
|
ISO/DIS 14832-1 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 1: REQUIREMENTS FOR VERTICAL SEPARATING LOAD-BEARING ELEMENTS |
|
17/30335987 DC : 0
|
BS ISO 20902-1 - FIRE TEST PROCEDURES FOR DIVISIONAL ELEMENTS THAT ARE TYPICALLY USED IN OIL, GAS AND PETROCHEMICAL INDUSTRIES - PART 1: GENERAL REQUIREMENTS |
|
07/30147204 DC : 0
|
BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS |
|
UNE-EN 61439-6:2013
|
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) |
|
BS ISO 10840:2008
|
PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS |
|
ISO 21927-3:2006
|
Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
|
UNE-EN 45545-3:2013
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
BS ISO 3009:2003
|
FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - LAZED ELEMENTS |
|
BS ISO 10294-2:1999
|
FIRE-RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - CLASSIFICATION, CRITERIA AND FIELD OF APPLICATION OF TEST RESULTS |
|
FM 4100 : 1988
|
FIRE DOOR ASSEMBLIES |
|
EN IEC 62688:2018
|
Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
|
ISO 3009:2003
|
Fire-resistance tests Elements of building construction Glazed elements |
|
NF EN 60439-2 : 2000 AMD 1 2006
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
ISO 834-11:2014
|
Fire resistance tests Elements of building construction Part 11: Specific requirements for the assessment of fire protection to structural steel elements |
|
ISO 21927-8:2017
|
Smoke and heat control systems — Part 8: Smoke control dampers |
|
EN 14236:2007
|
Ultrasonic domestic gas meters |
|
NFPA 301 : 2018
|
SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
|
DIN EN 1359:2007-06
|
GAS METERS - DIAPHRAGM GAS METERS |
|
DIN EN 12101-3:2015-12
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
|
DIN EN 14236:2008-06
|
ULTRASONIC DOMESTIC GAS METERS |
|
UNE-EN 12101-3:2016
|
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
|
DIN EN 1775:2007-10
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
|
I.S. EN 12101-3:2015
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
|
I.S. EN 1359:2017
|
GAS METERS - DIAPHRAGM GAS METERS |
|
I.S. EN 1775:2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
|
NBR 15708-3 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPE - PART 3: GRATING |
|
PD 7974-3:2011
|
Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin |
|
BS 5588-9:1999
|
FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - PART 9: CODE OF PRACTICE FOR VENTILATION AND AIR CONDITIONING DUCTWORK |
|
12/30250116 DC : 0
|
BS ISO 834-11 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 11: SPECIFIC REQUIREMENTS FOR THE ASSESSMENT OF FIRE PROTECTION TO STRUCTURAL STEEL ELEMENTS |
|
14/30291693 DC : 0
|
BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS |
|
01/540031 DC : DRAFT JAN 2001
|
ISO/DIS 834-8 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDINGS CONSTRUCTION - PART 8: SPECIFIC REQUIREMENTS FOR NON-LOAD BEARING VERTICAL SEPARATING ELEMENTS |
|
10/30216690 DC : 0
|
BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
14/30304116 DC : 0
|
BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
|
BS ISO 2919 : 2012
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
17/30359807 DC : DRAFT SEP 2017
|
BS ISO 24679-1 - FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE - PART 1: GENERAL |
|
BS ISO 21927-1:2008
|
Smoke and heat control systems Specification for smoke barriers |
|
BS ISO 10295-1:2007
|
Fire tests for building elements and components. Fire testing of service installations Penetration seals |
|
I.S. EN ISO 19901-3:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014) |
|
BS ISO 834-10:2014
|
FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL STEEL ELEMENTS |
|
BS EN 45545-3:2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
14/30291624 DC : 0
|
BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
|
05/30137099 DC : 0
|
ISO 5925-1 - FIRE TESTS - SMOKE CONTROL DOOR AND SHUTTER ASSEMBLIES - PART 1: AMBIENT AND MEDIUM TEMPERATURE LEAKAGE TEST PROCEDURE |
|
UNE-EN ISO 2919:2015
|
Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
|
I.S. EN 14236:2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
PD 7974-3:2003
|
APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS - PART 3: STRUCTURAL RESPONSE AND FIRE SPREAD BEYOND THE ENCLOSURE OF ORIGIN (SUB-SYSTEM 3) |
|
UNI CEI EN 45545-3 : 2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
UNI EN ISO 2919 : 2015
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
PREN 1359 : DRAFT 2014
|
GAS METERS - DIAPHRAGM GAS METERS |
|
XP ISO/TS 29761 : 2016 XP
|
FIRE SAFETY ENGINEERING - SELECTION OF DESIGN OCCUPANT BEHAVIOURAL SCENARIOS |
|
ISO/TR 10840:1993
|
Plastics Burning behaviour Guidance for development and use of fire tests |
|
ISO/TR 834-2:2009
|
Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples |
|
ISO 14692-2:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
|
I.S. EN 60439-2:2000
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
DIN EN 14470-1:2004-07
|
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
18/30359998 DC : 0
|
BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
|
CSA ISO 19901-3 : 2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
|
ASHRAE HDBK REFRIGERATION : 2014
|
ASHRAE HANDBOOK - REFRIGERATION |
|
UNI EN 1775 : 2007
|
GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
|
ISO 834-8:2002
|
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
|
12/30255590 DC : 0
|
BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
|
UNI CEI CEN/TS 45545-3 : 2009
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
PREN 14236 : DRAFT 2017
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO/TR 834-3:2012
|
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
|
UNI CEN ISO/TS 27469 : 2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS |
|
BS ISO 21927-7:2017
|
Smoke and heat control systems Smoke ducts sections |
|
UNI ISO 2919 : 2012
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
|
BS ISO 21927-8:2017
|
Smoke and heat control systems Smoke control dampers |
|
ISO 10295-1:2007
|
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals |
|
05/30141855 DC : DRAFT NOV 2005
|
ISO 6944-1 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - PART 1: VENTILATION DUCTS |
|
ISO 834-12:2012
|
Fire resistance tests Elements of building construction Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces |
|
BS ISO 834-11:2014
|
Fire resistance tests. Elements of building construction Specific requirements for the assessment of fire protection to structural steel elements |
|
ISO 9051:2001
|
Glass in building — Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building |
|
BS ISO/TR 13387-6:1999
|
FIRE SAFETY ENGINEERING - PART 6: STRUCTURAL RESPONSE AND FIRE SPREAD BEYOND THE ENCLOSURE OF ORIGIN |
|
CSA ISO/IEC 18010 :2004
|
INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
|
BS ISO 21927-2 : 2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
|
ISO 14886:2014
|
Ships and marine technology Large yachts Structural fire protection for FRP yachts |
|
I.S. EN ISO 2919:2014
|
RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION (ISO 2919:2012) |
|
ISO/TR 5925-2:2006
|
Fire tests Smoke-control door and shutter assemblies Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy |
|
I.S. EN 61439-6:2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) (IEC 61439-6:2012 (EQV)) |
|
XP CEN/TS 45545-3 : 2009 XP
|
RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 6944-2:2009
|
Fire containment Elements of building construction Part 2: Kitchen extract ducts |
|
BS ISO 10294-1 : 1996
|
FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD |
|
I.S. EN IEC 62688:2018
|
CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
|
ISO 10840:2008
|
Plastics Guidance for the use of standard fire tests |
|
ISO 12472:2003
|
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals |
|
S.R. CEN/TS 45545-3:2009
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 3008:2007
|
Fire-resistance tests Door and shutter assemblies |
|
DD ENV 14236:2002
|
ULTRASONIC DOMESTIC GAS METERS |
|
DIN EN 14236 E : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO/TR 24679-4:2017
|
Fire safety engineering Performance of structures in fire Part 4: Example of a fifteen-storey steel-framed office building |
|
ONORM EN 14236 : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
NF EN 14236 : 2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
ASTM E 2748 : 2012 : REV A
|
Standard Guide for Fire-Resistance Experiments |
|
ISO 5925-1:2007
|
Fire tests Smoke-control door and shutter assemblies Part 1: Ambient- and medium-temperature leakage tests |
|
EN ISO 14692-2:2017
|
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) |
|
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
|
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
IEC 61439-6:2012
|
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) |
|
BS EN 14236:2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
IEC 60439-2:2000+AMD1:2005 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
|
11/30211394 DC : DRAFT MAR 2011
|
BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
|
ISO 19901-3:2014
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 3: Topsides structure |
|
ISO/TS 27469:2010
|
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers |
|
ISO 2919:2012
|
Radiological protection — Sealed radioactive sources — General requirements and classification |
|
ASTM E 2924 : 2014
|
Standard Practice for Intumescent Coatings |
|
09/30150663 DC : 0
|
BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
|
16/30242287 DC : 0
|
BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION |
|
EN 1775:2007
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
|
EN ISO 16923:2018
|
Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
|
EN ISO 2919:2014
|
Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
|
EN 14470-1 : 2004
|
FIRE SAFETY STORAGE CABINETS - PART 1: SAFETY STORAGE CABINETS FOR FLAMMABLE LIQUIDS |
|
EN ISO 19901-3:2014
|
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) |
|
EN 1359:2017
|
Gas meters - Diaphragm gas meters |
|
ISO 3008-2:2017
|
Fire-resistance tests — Part 2: Lift landing door assemblies |
|
ISO/TR 12470-1:2017
|
Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 1: Loadbearing elements and vertical and horizontal separating elements |
|
BS ISO 10295-2:2009
|
FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 2: LINEAR JOINT (GAP) SEALS |
|
07/30172821 DC : 0
|
BS ISO 10295-2 - FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 2: LINEAR JOINT (GAP) SEALS |
|
DD ISO/TS 24679:2011
|
FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE |
|
16/30331280 DC (published 2016-04)
|
BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
|
XP ISO/TS 24679 : 2011 XP
|
FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE |
|
97/544179 DC : DRAFT JAN 1998
|
ISO/DIS 14832-4 - FIRE RESISTANCE TESTS - LOAD-BEARING ELEMENTS OF BUILDING CONSTRUCTION - PART 4: REQUIREMENTS FOR COLUMNS |
|
MIL-PRF-81904 Revision C:2011
|
COATING COMPOUND, THERMAL-INSULATION |
|
DIN EN 45545-3:2013-08
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
BS ISO 21927-3 : 2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
|
DIN EN 15254-4 E : 2013
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
08/30154274 DC : DRAFT MAR 2008
|
BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
|
BS EN 61439-6:2012
|
Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways) |
|
PD ISO/TR 24679-4:2017
|
Fire safety engineering. Performance of structures in fire Example of a fifteen-storey steel-framed office building |
|
08/30167713 DC : DRAFT JUNE 2008
|
BS ISO 6944-2 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - KITCHEN EXTRACT DUCTS |
|
08/30192184 DC : 0
|
ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
|
18/30370902 DC : DRAFT APR 2018
|
BS ISO 3008-1 - FIRE RESISTANCE TESTS - DOOR AND SHUTTER ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
|
CEI EN 61439-6 : 2013
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) |
|
BS ISO 16923 : 2016
|
NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
|
10/30232464 DC : 0
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
15/30315346 DC : 0
|
BS ISO 17880 - CELLULAR PLASTIC - SELF-SUPPORTING METAL-FACED SANDWICH PANELS - COMPLEMENTARY ELEMENT |
|
BS ISO 14886:2014
|
SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - STRUCTURAL FIRE PROTECTION FOR FRP YACHTS |
|
BS EN ISO 16923:2018
|
Natural gas fuelling stations. CNG stations for fuelling vehicles |
|
DD CEN/TS 45545-3:2009
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
PD 7974-1:2003
|
APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS - PART 1: INITIATION AND DEVELOPMENT OF FIRE WITHIN THE ENCLOSURE OF ORIGIN (SUB-SYSTEM 1) |
|
03/115061 DC : 0
|
ISO 3008 - FIRE RESISTANCE TESTS - TEST METHOD FOR FIRE RESISTANCE OF DOORS AND SHUTTERS |
|
S.R. CEN ISO/TS 27469:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METHOD OF TEST FOR FIRE DAMPERS (ISO/TS 27469:2010) |
|
CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012
|
INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
|
EN 15254-4:2008+A1:2011
|
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions |
|
ISO 834-5:2000
|
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
|
I.S. EN ISO 16923:2018
|
NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
|
I.S. EN 45545-3:2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
|
ISO 834-4:2000
|
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
|
ISO/TR 10295-3:2012
|
Fire tests for building elements and components Fire testing of service installations Part 3: Single component penetration seals Guidance on the construction and use of test configurations and simulated services to characterise sealing materials |
|
ISO 21927-7:2017
|
Smoke and heat control systems — Part 7: Smoke ducts sections |
|
UNI EN 15254-4 : 2011
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
ISO 3008-3:2016
|
Fire resistance tests Part 3: Door and shutter assemblies horizontally oriented |
|
ISO/TR 22898:2006
|
Review of outputs for fire containment tests for buildings in the context of fire safety engineering |
|
UNE-EN 15254-4:2009
|
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions |
|
BS EN 15254-4 : 2008
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
I.S. EN 15254-4:2008
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
|
ISO 15928-4:2017
|
Houses — Description of performance — Part 4: Fire safety |
|
BS EN 1775:2007
|
Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
|
BS ISO 22734-1:2008
|
HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 1: INDUSTRIAL AND COMMERCIAL APPLICATIONS |
|
BS EN 14470-1:2004
|
Fire safety storage cabinets Safety storage cabinets for flammable liquids |
|
ISO 22734-1:2008
|
Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
|
BS EN 1359:2017
|
Gas meters. Diaphragm gas meters |
|
UNE-ISO 22734-1:2012
|
Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
|
EN 61439-6 : 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 6: BUSBAR TRUNKING SYSTEMS (BUSWAYS) (IEC 61439-6:2012) |
|
CEN/TS 45545-3:2009
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |