ISO 8495:2013

Current

Current The latest, up-to-date edition.

Metallic materials Tube Ring-expanding test

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French

Published date: 05-11-2013

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 8495:2013 specifies a method for a ring-expanding test on tubes, that is used to reveal defects both on the surfaces and within the tube wall by expanding the test piece using a conical mandrel until fracture occurs. It may be also used to assess the ability of tubes to undergo plastic deformation.

The ring-expanding test is applicable to tubes having an outside diameter from 18 mm up to and including 150 mm and a wall thickness from 2 mm up to and including 16 mm.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes ISO R 374 (04/2001) Supersedes ISO/DIS 8495. (11/2013)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO/R 374:1964 ISO 8495:1998

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN ISO 8495 : 2014	Identical
NEN EN ISO 8495 : 2013	Identical
NS EN ISO 8495 : 2013	Identical
I.S. EN ISO 8495:2013	Identical
PN EN ISO 8495 : 2014	Identical
SAC GB/T 25047 : 2016	Identical
SN EN ISO 8495 : 2014	Identical
UNI EN ISO 8495 : 2014	Identical
SS-EN ISO 8495:2013	Identical
UNE-EN ISO 8495:2014	Identical
BS EN ISO 8495:2013	Identical
EN ISO 8495:2013	Identical
NF EN ISO 8495 : 2014	Identical
DIN EN ISO 8495:2014-03	Identical
EN 10236 : 1993	Similar to
NEN ISO 8495 : 1987	Identical
DIN EN 10236:1994-01	Identical
BS EN 10236:1994	Similar to
UNE 7512:1989	Identical
NFA 49 861 : 1988	Similar to
DIN 50137:1979-06	Similar to
SANS 8495 : 1ED 2003	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO 9330-6:1997	Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
I.S. EN 10216-2:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10216-2:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
I.S. EN 10216-4:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 12952-2:2011	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 10253-3:2008	Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 12392:2016	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 10217-7:2014	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
UNI EN 10217-7 : 2014	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
PREN 10253-4 : DRAFT 2017	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
ISO 9330-2:1997	Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
DIN EN 10216-5:2014-03	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 10216-2:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10216-4:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
ONORM EN 10216-2 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10216-3:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10216-5:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10217-7:2014	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
I.S. EN 12952-2:2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 12392:2016	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
08/30184300 DC : DRAFT SEP 2008	BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 10216-5 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
ONORM EN 10217-7 : 2014	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
ONORM EN 10216-5 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
S.R. CWA 15902-2:2009	LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS
ISO 9329-4:1997	Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
KTA 3211.1 : 2015	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
ISO 9329-3:1997	Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties
ISO 9330-3:1997	Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
DIN EN 12392:2016-08	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 10216-3:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 10216-2 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10217-7:2014	Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
UNE-EN 10216-4:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
UNI EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 10216-4 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 10216-3 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
EN 10216-5:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
UNI EN 10253-3 : 2009	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10253-3:2009-02	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
16/30322064 DC : DRAFT MAR 2016	BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
EN 10216-2:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 10216-4:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10217-7:2015-01	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
BS EN 12392:2016	Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 10216-5:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
UNE-EN 10216-2:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10216-3:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
UNE-EN 12952-2:2012	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 10216-3:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10216-5:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
BS EN 10253-3:2008	Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
I.S. EN 10253-3:2008	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 12952-2:2011-10	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
BS EN 12952-2:2011	Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
ONORM EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
EN 10216-4:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-3:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account