• There are no items in your cart

ISO 8501-1:2007

Current

Current

The latest, up-to-date edition.

Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, Russian

Published date

01-06-2007

ISO 8501-1:2007 is a hardback A5-format book in four languages (English, French, German and Swedish), which specifies a series of rust grades and preparation grades of steel surfaces. The various grades are defined by written descriptions together with photographs that are representative examples within the tolerance for each grade as described in words.

It is applicable to hot-rolled steel surfaces prepared for painting by methods such as blast-cleaning, hand and power tool cleaning and flame cleaning, although these methods rarely lead to comparable results. Essentially, these methods are intended for hot-rolled steel, but blast-cleaning methods, in particular, could also be used on cold-rolled steel of sufficient thickness to withstand any deformation caused by the impact of the abrasive or the effects of power tool cleaning.

This part of ISO 8501 is applicable also to steel substrates that show residues of firmly adhering paint and other foreign matter in addition to residual mill scale.



IMPORTANT - The reference photographs utilized for the assessment of steel surfaces when using this part of ISO 8501 are not included in this electronic file because the quality of their reproduction is subject to change when they are viewed on screen or printed out. It is important that only the photographs contained in officially printed versions of this part of ISO 8501, purchased from ISO or from ISO member bodies or their distributors, are used when carrying out assessments.

DevelopmentNote
Supersedes ISO/DIS 8501-1. (06/2007) AVAILABLE IN HARDCOPY ONLY (08/2007)
DocumentType
Standard
Pages
74
ProductNote
THIS STANDARD ALSO REFERS ISO 8502 AND ISO 8503 . IMPORTANT - Original Photographs contained in this Standard are not included in this product as licensed Repro and must be purchased from ISO.

The reference photographs utilized for the assessment of steel surfaces when using this part part of ISO 8501 are not included in this electronic file because the quality of their reproduction is subject to change when they are viewed on screen or printed out. It is important that only the photographs contained in officially printed versions of this part of ISO 8501, purchased from ISO or from ISO member bodies or their distributors, are used when carrying out assessments. NEW CHILD SUPP 1994 IS NOW ADDED
PublisherName
International Organization for Standardization
Status
Current
Supersedes

DIN EN 16728:2016-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
14/30297533 DC : 0 BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION
I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
07/30159562 DC : 0 BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
06/30125909 DC : DRAFT OCT 2006 ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
BIS IS 16002-2 : 2012 WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 2: WELDING PROPERTIES OF SHOP PRIMERS
NFA 49 715 : 95 XP TUBES EN ACIER - REVETEMENT INTERNE PAR PEINTURE LIQUIDE A BASE DE RESINE EPOXYDIQUE, UTILISE POUR LE TRANSPORT DE GAZ ET HYDROCARBURE NON CORROSIFS - APPLICATIONS - CONTROLES ET ESSAIS
07/30163686 DC : 0 BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - PERIODIC INSPECTION OF TRANSPORTABLE REFILLABLE LPG CYLINDERS
BS 7079-B6(1996) : 1996 AMD 10698 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS BY THE BRESLE METHOD
DIN EN ISO 15589-2 E : 2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012)
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
15/30327431 DC : 0 BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES
ISO 12944-9:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
I.S. EN ISO 12944-5:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018)
BS ISO 17941:2015 Ships and marine technology. Hydraulic hinged watertight fireproof doors
BS ISO 17940:2015 Ships and marine technology. Hinged watertight doors
API 5L REDLINE : 2007 SPECIFICATION FOR LINE PIPE
I.S. EN ISO 2063-1:2017 THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017)
08/30176215 DC : DRAFT JAN 2008 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
11/30246055 DC : 0 BS EN ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
DIN EN ISO 16784-2:2008-07 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
AEP-61 : 2009 PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
BS 7079-A2(1996) : 1996 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS
06/30159843 DC : 0 BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
16/30337296 DC : 0 BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION
10/30165662 DC : 0 BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
13/30236314 DC : 0 BS EN ISO 4618 - PAINTS AND VARNISHES - TERMS AND DEFINITIONS
12/30267658 DC : 0 BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS
02/703683 DC : DRAFT FEB 2002
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
ISO 17941:2015 Ships and marine technology Hydraulic hinged watertight fireproof doors
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
DIN EN 12496:2014-02 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
NORSOK M 501 : REV 6 SURFACE PREPARATION AND PROTECTIVE COATING
11/30246678 DC : 0 BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
02/123296 DC : DRAFT SEP 2002 BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS
BS ISO 16784-2 : 2006 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
I.S. EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017)
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN EN 15655:2016-07 (Draft) DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 25457:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
UNI EN 13507 : 2010 THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING
DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination
BS EN ISO 19901-3:2014 Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure
PREN 1825-1 : DRAFT 1995 INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
BS EN ISO 12944-6:2018 Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods
I.S. EN 15711:2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ASTM F 941 : 1999 Standard Practice for Inspection of Marine Surface Preparation and Coating Application
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN 12285-1:2003 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
DIN EN 12285-1:2016-10 (Draft) WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
EN ISO 12944-9:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
I.S. EN 253:2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
I.S. EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN ISO 8502-3:2014-06 (Draft) PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
UNE-EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)
BS EN 13894-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading During cure
BS EN 14901:2006 Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
UNE-EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
BS EN ISO 19902 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
BS EN 22063:1994 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
BS EN ISO 8501-2 : 2001 AMD 13359 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS
BS EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS EN 14616:2004 Thermal spraying. Recommendations for thermal spraying
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products
ISO 14916:2017 Thermal spraying — Determination of tensile adhesive strength
ISO 15547:2000 Petroleum and natural gas industries Plate heat exchangers
I.S. EN ISO 4628-3:2016 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING (ISO 4628-3:2016)
I.S. EN ISO 13705:2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE (ISO 13705:2012)
I.S. EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
I.S. EN 14901:2014 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
DIN EN 13733:2002-09 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE DURABILITY OF STRUCTURAL BONDING
DIN EN 15711:2009-08 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
EN 10339:2007 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
DIN EN 14616:2005-02 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
EN 10300:2005 Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products
DIN EN 10238:2009-10 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
EN ISO 8501-2:2001 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 10301:2003 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
NBR 15880 : 2010 DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS
DEFSTAN 02-319/2(2002) : INTERIM REQUIREMENTS FOR AVIATION FUEL SYSTEMS IN HM SURFACE SHIPS
SSPC-GUIDE 22 : 2016 USE AND RETENTION OF PRE-CONSTRUCTION PRIMERS ON STEEL IN SHIPBUILDING
I.S. EN 10300:2005 Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating
NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
17/30286850 DC : DRAFT SEP 2017 BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION
ONORM B 5101 : 2013 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - SUPPLEMENTARY REQUIREMENTS TO ONORM EN 858-1 AND -2
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
PREN ISO 13705 : DRAFT 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
BIS IS/ISO 3183 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
13/30281842 DC : 0 BS ISO 17941 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC HINGED WATERTIGHT FIREPROOF DOORS
08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
DIN EN 16623:2015-04 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
ISO 16311-4:2014 Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention
14/30300516 DC : 0 BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE
I.S. EN ISO 15589-2:2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012)
BS EN ISO 16784-2:2008 Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
16/30327440 DC : 0 BS EN ISO 12944-3 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE COATING SYSTEMS - PART 3: DESIGN CONSIDERATIONS
16/30337293 DC : 0 BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
14/30260020 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
04/30111935 DC : DRAFT APR 2004 ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
BS EN 15711:2009 Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
DIN EN ISO 28721-4:2016-03 VITREOUS AND PORCELAIN ENAMELS - GLASSLINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASSLINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015)
BS ISO 15741:2016 Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
13/30285580 DC : 0 BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS
04/30114371 DC : DRAFT JUN 2004 EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION
BS EN 16623:2015 Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking
DIN EN ISO 16773-4:2016-02 (Draft) ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017)
BS 7361-1:1991 Cathodic protection Code of practice for land and marine applications
BS ISO 28721-4 : 2010 VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS
ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
UNI EN 15655 : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
14/30301162 DC : 0 BS EN ISO 4628-3 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING
08/30190329 DC : DRAFT DEC 2008 BS EN 10238 - AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
DIN EN 15655 E : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
17/30313373 DC : 0 BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION
PREN 13480-4 : DRAFT 2011 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
UNE-EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
14/30294800 DC : 0 BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
BS 7079-D3(1993) : 1993 AMD 13357 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR SURFACE PREPARATION - HAND- AND POWER-TOOL CLEANING
08/30168612 DC : DRAFT JAN 2008 BS ISO 28520 - SHIPS AND MARINE TECHNOLOGY - LUBRICATING OIL PIPE SYSTEMS - RECOMMENDED DEGREES OF CLEANING AND FLUSHING
04/30121907 DC : DRAFT SEP 2004 PREN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING OF DUCTILE IRON FITTINGS AND ACCESSORIES (HEAVY DUTY) - REQUIREMENTS AND TEST METHODS
NACE WJ 1 : 2012 WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE
05/30131064 DC : DRAFT MAR 2005 EN 15189:2005 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
16/30340626 DC : 0 BS EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
BS 7079-0:1990 Preparation of steel substrates before application of paints and related products Introduction
PREN 1440 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION
UNE-EN 16623:2015 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
BS EN 16728 : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
NACE SP 05 08 : 2010 METHODS OF VALIDATING EQUIVALENCE TO ISO 8502-9 ON MEASUREMENT OF THE LEVELS OF SOLUBLE SALTS
UNE-EN 1440:2016 LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
ISO 10464:2004 Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing
DIN EN 16728 E : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
ISO 12944-8:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance
EN ISO 3183:2012/A1:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
I.S. EN ISO 16784-2:2008 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
EN ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)
BS EN ISO 28721-4:2015 Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
DIN EN ISO 12944-6:1998-07 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS
ASTM F 941 : 1999 : R2013 Standard Practice for Inspection of Marine Surface Preparation and Coating Application
UNE-EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
DIN EN 16813:2015-01 (Draft) THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD
DIN EN ISO 4628-3:2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016
DIN EN 14901 E : 2014 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 8503-2:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
UNE-EN ISO 4618:2015 Paints and varnishes - Terms and definitions (ISO 4618:2014)
BS EN ISO 1514:2004 Paints and varnishes. Standard panels for testing
ISO 15711:2003 Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
CSA HPIT 1 : 2015 COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
BS EN 253 : 2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
CSA HPIT 1:15 (R2020) Compressed hydrogen powered industrial truck on-board fuel storage and handling components
ISO 19859:2016 Gas turbine applications Requirements for power generation
DIN EN 14901:2014-12 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
UNE-EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
I.S. EN ISO 8501-4:2007 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 4: INITIAL SURFACE CONDITIONS, PREPARATION GRADES AND FLASH RUST GRADES IN CONNECTION WITH HIGH-PRESSURE WATER JETTING
I.S. EN ISO 14921:2010 THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS
I.S. EN 40-5:2002 LIGHTING COLUMNS - PART 5: REQUIREMENTS FOR STEEL LIGHTING COLUMNS
I.S. EN ISO 4618:2014 PAINTS AND VARNISHES - TERMS AND DEFINITIONS (ISO 4618:2014)
I.S. EN ISO 19902:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
UNE-EN 10238:2011 Automatically blast-cleaned and automatically prefabrication primed structural steel products
I.S. EN ISO 8503-1:2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012)
I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
DIN 32539:1998-07 FLAME CLEANING OF STEEL AND CONCRETE SURFACES
I.S. EN ISO 8502-3:2017 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
NACE SP 01 08 : 2008 CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
I.S. EN ISO 1514:2016 PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016)
I.S. EN 12952-5:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
I.S. EN ISO 13706:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS (ISO 13706:2011)
I.S. EN ISO 21809-2:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014)
I.S. EN 10238:2009 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
DIN EN 858-1:2002-05 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
EN ISO 19902:2007/A1:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013)
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
I.S. EN ISO 8503-2:2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE (ISO 8503-2:2012)
UNI EN 14870-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
UNI EN ISO 15589-2 : 2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
BS 3900-A3(2004) : 2004 PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING
BS 7079-D1(2000) : 2000 AMD 13360 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D1: GENERAL PRINCIPLES
BS 7079-D2(2000) : 2000 AMD 13361 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D2: ABRASIVE BLAST CLEANING
BS 2015:1992 Glossary of paint and related terms
NACE AMPP TM21612:2022 Liquid-Applied Coating Performance Test Methods for Offshore Structures
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
96/709571 DC : DRAFT JUL 1996 PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
BS EN 1440 : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION
API 5CRA CHINESE : 2011 SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
09/30197538 DC : 0 BS ISO 12778 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
DIN EN ISO 28721-4 E : 2016 VITREOUS AND PORCELAIN ENAMELS - GLASSLINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASSLINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015)
16/30319008 DC : 0 BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS
I.S. EN ISO 12944-6:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018)
11/30235499 DC : 0 BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
ISO 17940:2015 Ships and marine technology Hinged watertight doors
I.S. EN ISO 15547-1:2005 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PLATE-TYPE HEAT EXCHANGERS - PART 1: PLATE-AND-FRAME HEAT EXCHANGERS
14/30266785 DC : 0 BS EN ISO 16773-4 - PAINTS AND VARNISHES - ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON HIGH-IMPEDANCE COATED SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED SPECIMENS
16/30321447 DC : DRAFT SEP 2016 BS ISO 20438 - SHIPS AND MARINE TECHNOLOGY - OFFSHORE MOORING CHAINS
15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
08/30154948 DC : DRAFT FEB 2008 BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
10/30232896 DC : 0 BS ISO 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
BS 7079-D2:1993 Preparation of steel substrates before application of paints and related products. Methods for surface preparation Abrasive blast-cleaning
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
BS ISO 19354:2016 Ships and marine technology. Marine cranes. General requirements
API 537 CHINESE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
NACE SP 04 92 : 2016 METALLURGICAL AND INSPECTION REQUIREMENTS FOR OFFSHORE PIPELINE BRACELET ANODES
16/30339226 DC : DRAFT JUNE 2016 BS EN 13507 - THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING
NACE TM 04 04 : 2004 Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br>
14/30281839 DC : 0 BS ISO 17940 - SHIPS AND MARINE TECHNOLOGY - HINGED WATERTIGHT DOORS
DIN EN 16813 E : 2017 THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD
BS EN ISO 14916:2017 ENISO 14916 Thermal spraying -- Determination of tensile adhesive strength
98/711668 DC : DRAFT AUG 98 PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS
07/30168488 DC : 0 BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS 7079-B2(1992) : 1992 AMD 10591 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - METHODS FOR DETERMINATION OF CHLORIDES ON CLEAN SURFACES
I.S. EN ISO 19901-3:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014)
I.S. EN 16813:2016 THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD
API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
API 537 REDLINE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
14/30304016 DC : 0 BS ISO 7061 - SHIPS AND MARINE TECHNOLOGY - ALUMINIUM SHORE GANGWAYS FOR SEAGOING VESSELS
95/101288 DC : DRAFT FEB 1995 PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
UNE-EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)
EN ISO 12944-5:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018)
DIN EN ISO 12679 E : 2015 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
04/19985213 DC : DRAFT NOV 2004 ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 662-1 : 2003 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES - PART 1: PLATE-AND-FRAME HEAT EXCHANGERS
06/30083492 DC : DRAFT MAY 2006 ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: FUSION BONDED EPOXY COATINGS
DD ENV 1090-1:1998 Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document)
05/30127458 DC : DRAFT JAN 2005 ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
DIN EN 16623 E : 2015 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
I.S. EN 1440:2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION
NFP 22 501-1 : 98 XP EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN ISO 12944-4:2017 Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation
BS EN ISO 12679:2015 Thermal spraying. Recommendations for thermal spraying
PREN 13507 : DRAFT 2016 THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING
ISO 16145-2:2012 Ships and marine technology — Protective coatings and inspection method — Part 2: Void spaces of bulk carriers and oil tankers
ISO 10303-215:2004 Industrial automation systems and integration — Product data representation and exchange — Part 215: Application protocol: Ship arrangement
ISO 7061:2015 Ships and marine technology — Aluminium shore gangways for seagoing vessels
I.S. EN ISO 14916:2017 THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017)
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
ISO 21809-4:2009 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE)
EN ISO 12944-3:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017)
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
I.S. EN ISO 12944-9:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
EN ISO 2063-1:2017 Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)
NACE SP 01 15 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
PREN 15655 : DRAFT 2016 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
NACE SP 03 94 : 2013 APPLICATION, PERFORMANCE, AND QUALITY CONTROL OF PLANT-APPLIED SINGLE-LAYER FUSION-BONDED EPOXY EXTERNAL PIPE COATING
ISO 17939:2015 Ships and marine technology Oil tank hatches
ISO 15741:2016 Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
ISO 19354:2016 Ships and marine technology — Marine cranes — General requirements
ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
UNE-EN 12952-5:2012 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
I.S. EN 15655:2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
I.S. EN 12068:1999 CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS
ISO 3183-3:1999 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C
UNE-EN 15711:2010 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
DIN EN ISO 2063:2005-05 THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS
DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
DIN EN 448:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
BS EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
ISO/TR 8502-1:1991 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products
BS EN ISO 21809-2:2014 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
EEMUA 190 : 2000 GUIDE FOR THE DESIGN, CONSTRUCTION AND USE OF MOUNDED HORIZONTAL CYLINDRICAL VESSELS FOR PRESSURISED STORAGE OF LPG AT AMBIENT TEMPERATURE
EN ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting (ISO 8501-4:2006)
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
EEMUA 179 : 1996 WORKING GUIDE FOR CARBON STEEL EQUIPMENT IN WET H[2]S SERVICE
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
I.S. EN ISO 8502-6:2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
EN ISO 8504-3:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
ONORM EN ISO 8502-6 : 2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD
CSA ISO 19901-3 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE
EEMUA 183 : 2011 PREVENTION OF TANK BOTTOM LEAKAGE - A GUIDE FOR THE DESIGN AND REPAIR OF FOUNDATIONS AND BOTTOMS OF VERTICAL, CYLINDRICAL, STEEL STORAGE TANKS
EN ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
UNI EN 12952-5 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 10238 : 2009 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
UNI EN ISO 8503-1 : 2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES
UNI EN ISO 13628-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
UNI EN ISO 13706 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
UNI EN 15711 : 2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
UNI EN 15189 : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
UNI EN 12496 : 2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
BS 7079-A1(1989) : 1989 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: SPECIFICATION FOR RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS
UNI EN 14901 : 2014 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
EN 14870-1:2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
UNI EN ISO 8503-2 : 2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE
UNI EN ISO 14921 : 2011 THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS
UNI EN ISO 15783 : 2009 Seal-less rotodynamic pumps - Class II - Specification
UNI EN ISO 13705 : 2013 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
UNI EN 40-5 : 2003 LIGHTING COLUMNS - REQUIREMENTS FOR STEEL LIGHTING COLUMNS
UNI EN ISO 16784-2 : 2008 CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
BS 7079-A1:SUPP1(1996) : 1996 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - SPECIFICATION FOR RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS - REPRESENTATIVE PHOTOGRAPHIC EXAMPLES OF THE CHANGE OF APPEARANCE IMPARTED TO STEEL WHEN BLAST-CLEANED (CONT..)
BS 4164:2002 Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
09/30197687 DC : 0 BS ISO 14921 - THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS
I.S. EN ISO 2063-2:2017 THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017)
BS EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems Offshore pipelines
ISO 12944-3:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations
NACE RP 06 02 : 2002 FIELD-APPLIED COAL TAR ENAMEL PIPE COATING SYSTEMS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL
DIN EN 15711 E : 2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
BS ISO 15589-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
BS EN ISO 8504-3:2001 Preparation of steel substrates before application of paints and related products. Surface preparation methods Hand- and power-tool cleaning
BS EN 13507:2010 Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN ISO 12736:2014 Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
DD ENV ISO 8502-1:2001 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Field test for soluble iron corrosion products
BS ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
03/118673 DC : DRAFT DEC 2003 ISO 16784-2 - INDUSTRIAL COOLING WATER SYSTEMS - TESTING AND PERFORMANCE - EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES
BS EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
I.S. EN ISO 2063:2005 THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS
15/30294686 DC : 0 BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
16/30278559 DC : 0 BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS
DIN EN ISO 12679:2015-12 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
14/30297536 DC : 0 BS EN 16728 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
14/30266796 DC : 0 BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING
BS EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
NF ENV 1090-1 : 96 FD EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
01/713202 DC : DRAFT SEP 2001 ISO/DIS 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
NACE RP 03 94 : 2002 APPLICATION, PERFORMANCE, AND QUALITY CONTROL OF PLANT-APPLIED, FUSION-BONDED EPOXY EXTERNAL PIPE COATING
03/305328 DC : DRAFT MAR 2003 EN ISO 8502-2 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES
15/30285031 DC : 0 BS EN ISO 14916 - THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH
BS ISO 17939:2015 Ships and marine technology. Oil tank hatches
BS ISO 3183-3:1999 Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C
NACE TM 01 12 : 2012 TEST TO DETERMINE THE POTENTIAL CORROSION EFFECTS OF BALLAST WATER TREATMENT SYSTEMS ON BALLAST TANKS
NACE SP 03 87 : 2015 METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST GALVANIC ANODES FOR OFFSHORE APPLICATIONS
16/30234880 DC : 0 BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS
NACE RP 03 99 : 2004 PLANT-APPLIED EXTERNAL COAL TAR ENAMEL PIPE COATING SYSTEMS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL
UNE-EN ISO 12679:2016 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
14/30273520 DC : 0 BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES
NACE SP 01 09 : 2009 FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES
11/30242245 DC : 0 BS ISO 16145-1 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 1: DEDICATED SEA WATER BALLAST TANKS
03/314809 DC : DRAFT SEP 2003 EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
08/30190263 DC : DRAFT SEP 2008 BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN 15655:2009 Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
BS 7079-D1:1993 Preparation of steel substrates before application of paints and related products. Methods for surface preparation General principles
BS ISO 7825:2017 Shipbuilding. Deck machinery. General requirements
BS EN 16813:2016 Thermal spraying. Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
I.S. EN ISO 12944-3:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017)
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
07/30165568 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
NACE WJ 1 CHINESE : 2012 WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
SSPC-SP WJ 1 : 2012 WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API SPEC 5CRA : 2010 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
I.S. EN 16728:2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
API 662 : 2006 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
ISO 28521:2009 Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing
ONORM EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
UNE-EN 16813:2017 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
I.S. EN ISO 12736:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
ISO 7825:2017 Shipbuilding — Deck machinery — General requirements
ISO 28520:2009 Ships and marine technology — Lubricating oil systems — Guidance for grades of cleanliness and flushing
I.S. EN ISO 14918:1999 THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS
I.S. EN ISO 16773-4:2017 ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017)
AEP-63 : 2009 PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
I.S. EN 13507:2010 THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT
BS EN ISO 2063-2:2017 Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems
BS EN ISO 12944-3:2017 Paints and varnishes. Corrosion protection of steel structures by protective paint systems Design considerations
NF EN ISO 12944-4 : 2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION
EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017)
UNE-EN 16728:2016 LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
PREN 14901 : DRAFT 2014 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
ISO 16145-3:2012 Ships and marine technology — Protective coatings and inspection method — Part 3: Cargo oil tanks of crude oil tankers
I.S. EN ISO 8504-2:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 2: ABRASIVE BLAST-CLEANING
EN ISO 2063-2:2017 Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
EN 13507:2010 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products. Surface preparation methods General principles
BS EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products. Surface preparation methods Abrasive blast cleaning
UNE-EN ISO 21809-1:2019 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
DIN EN 253:2015-12 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 40-5:2002 Lighting columns Requirements for steel lighting columns
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
ISO 12679:2011 Thermal spraying Recommendations for thermal spraying
BS EN ISO 17652-3:2003 Welding. Test for shop primers in relation to welding and allied processes Thermal cutting
BS EN ISO 2063:2005 Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
DIN EN 15189 E : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
BS EN 10301:2003 Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
BS EN ISO 15711:2004 Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water
ISO 15783:2002 Seal-less rotodynamic pumps — Class II — Specification
ISO 16961:2015 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006)
BS EN 13733:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents
BS EN ISO 15547:2001 Petroleum and natural gas industries. Plate heat exchangers
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
BS EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
UNE-EN 14901:2015 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
BS EN 12952-5:2011 Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler
BS EN 13480-4:2017 Metallic industrial piping Fabrication and installation
BS EN 10339:2007 Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
UNE-EN ISO 1514:2017 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
ISO 14921:2010 Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components
UNE-EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.)
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
UNE-EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
ISO 2063:2005 Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys
ISO 16784-2:2006 Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
BS EN ISO 4628-3:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of rusting
ISO 19901-3:2014 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure
UNE-EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
ISO 25457:2008 Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
BS EN ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 17652-3:2003 Welding — Test for shop primers in relation to welding and allied processes — Part 3: Thermal cutting
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ISO 13705:2012 Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
ISO 19902:2007 Petroleum and natural gas industries Fixed steel offshore structures
BS EN 15189:2006 Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
BS EN 10300:2005 Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
UNE-EN ISO 14921:2011 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
ISO 17652-2:2003 Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of shop primers
ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
BS EN 13894-2:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading After hardening
ISO 12736:2014 Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions
ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
UNE-EN 448:2017 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends
ONORM EN 253 : 2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers Plate-and-frame heat exchangers
EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
EN ISO 14921:2010 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005)
EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 15189:2006 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
EN ISO 13706:2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011)
EN ISO 12679:2015 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
EN ISO 15711:2004 Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003)
EN 14616:2004 Thermal spraying - Recommendations for thermal spraying
EN 13733:2002 Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents
EN 40-5:2002 Lighting columns - Part 5: Requirements for steel lighting columns
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 19901-3:2014 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014)
EN ISO 28721-4:2015 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2015)
EN ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)
EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008)
EN 253:2009+A2:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
EN 16623:2015 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
EN 15711:2009 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
EN ISO 15783:2003/A1:2008 Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
EN 13894-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure
EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
EN 22063 : 1993 METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS
EN ISO 16784-2:2008 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
EN ISO 17652-3:2003 Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003)
EN ISO 17652-2:2003 Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003)
EN ISO 15547 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - PLATE HEAT EXCHANGERS
EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN ISO 4618:2014 Paints and varnishes - Terms and definitions (ISO 4618:2014)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012)
EN 14901:2014 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
NACE TM 03 04 : 2004 OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION
ASTM F 941 : 1999 : R2005 Standard Practice for Inspection of Marine Surface Preparation and Coating Application
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
16/30337299 DC : 0 BS EN ISO 12944-8 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE
BS ISO 7061:2015 Ships and marine technology. Aluminium shore gangways for seagoing vessels
DIN EN 1440:2016-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION
18/30361473 DC : 0 BS EN ISO 8504-3 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 3: HAND- AND POWER-TOOL CLEANING
DIN HDBK 266 : 2ED 2004 KORROSIONSSCHUTZ VON STAHL DURCH BESCHICHTUNGEN UND UEBERZUEGE 3 - DIN-EN-ISO-NORMEN
BS ISO 21809-4:2009 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
BS EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Examples of spectra of polymer-coated and uncoated specimens
I.S. EN ISO 28721-4:2015 VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015)
07/30174613 DC : 0 BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
UNI EN ISO 21809-2 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS
API 536 : 2017 POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
04/30115425 DC : DRAFT JUN 2004 ISO 15547-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - PLATE HEAT EXCHANGERS - PART 1: PLATE-AND-FRAME TYPE
07/30140820 DC : 0 BS ISO 25457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
08/30193145 DC : 0 BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
17/30358601 DC : 0 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
05/30091555 DC : DRAFT MAY 2005 ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
DD ISO/TS 24817 : 2006 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
01/122232 DC : DRAFT JUNE 2001 BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
02/704943 DC : DRAFT APR 2002 PREN 10329 - STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
14/30273517 DC : 0 BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS
14/30281869 DC : 0 BS ISO 17939 - SHIPS AND MARINE TECHNOLOGY - OIL TANK HATCHES
DIN EN ISO 14916 E : 2017 THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017)
BS EN ISO 2063-1:2017 Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems
BIS IS 16002-3 : 2012 WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 3: THERMAL CUTTING
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NACE SP 03 95 : 2013 FUSION-BONDED EPOXY COATING OF STEEL REINFORCING BARS
NACE TM 02 04 : 2004 EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
UNE-EN ISO 21809-2:2015 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
NACE RP 03 03 : 2003 FIELD-APPLIED HEAT-SHRINKABLE SLEEVES FOR PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL
DIN EN ISO 15589-2:2014-07 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)
BS 7079-B3(1993) : 1993 AMD 10701 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD)
API 5CRA : 2010 : INC : ERR 1 : 2011 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
12/30260512 DC : 0 BS EN ISO 28721-4 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS
11/30242248 DC : 0 BS ISO 16145-2 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 2: VOID SPACES OF BULK CARRIERS AND OIL TANKERS
16/30321441 DC : DRAFT SEP 2016 BS ISO 7825 - SHIPBUILDING - DECK MACHINERY - GENERAL REQUIREMENTS
09/30171555 DC : DRAFT SEP 2009 BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
NACE RP 03 87 : 0 METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS
BS ISO 12679 : 2011 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
BS DD207(1992) : 1992 METHOD OF TEST FOR SOLUBLE IRON CORROSION PRODUCTS TO ASSESS SURFACE CLEANLINESS OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS
I.S. EN ISO 3183:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
96/709572 DC : DRAFT JUL 1996 PREN 10287 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL FUSED POLYETHYLENE BASED COATINGS
DD ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination
11/30242251 DC : 0 BS ISO 16145-3 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 3: CARGO OIL TANKS OF CRUDE OIL TANKERS
NORSOK M-120:2008 MATERIAL DATA SHEETS FOR STRUCTURAL STEEL
17/30324747 DC : 0 BS ISO 19037 - SHIPS AND MARINE TECHNOLOGY - GATE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS
97/703009 DC : 0 PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
ISO 18468:2017 Ductile iron fittings, accessories and their joints and valves — Epoxy coating
14/30250131 DC : 0 BS EN ISO 8502-3 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD)
AEP-60 : 2009 PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS
PREN 10238 : DRAFT 2008 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
ISO 2063-1:2017 Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems
I.S. EN ISO 12679:2015 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
UNI 10284 : 1993 MONOLITHIC INSULATION JOINTS - 10 <= DN <= 80 - PN 10
PREN 448 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
NACE No. 8/SSPC-SP 14:2007 INDUSTRIAL BLAST CLEANING
UNI EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
I.S. EN 12496:2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
18/30368651 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
ISO 16145-1:2012 Ships and marine technology — Protective coatings and inspection method — Part 1: Dedicated sea water ballast tanks
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
I.S. EN ISO 16961:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015)
NFT 34 550 : 1995 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINTS SYSTEMS - SPECIFICATIONS
DIN EN ISO 14916:2015-09 (Draft) THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017)
NF EN ISO 25457 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARES DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
ISO 12944-6:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
ISO 12944-5:2018 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
AEP-59 : 2009 APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE
BS EN ISO 12944-8:2017 Paints and varnishes. Corrosion protection of steel structures by protective paint systems Development of specifications for new work and maintenance
NF EN ISO 3183 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
BS EN ISO 14918:1998 Thermal spraying. Approval testing of thermal sprayers
DIN EN ISO 12944-5:2016-06 (Draft) PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS
16/30339223 DC : 0 BS EN 17002 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION
NACE 6G197 : 0 DESIGN, INSTALLATION, AND MAINTENANCE OF COATING SYSTEMS FOR CONCRETE USED IN SECONDARY CONTAINMENT
NACE TM 01 04 : 2004 OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION
ASTM F 941 : 1999 : R2009 Standard Practice for Inspection of Marine Surface Preparation and Coating Application
ISO 5256:1985 Steel pipes and fittings for buried or submerged pipe lines External and internal coating by bitumen or coal tar derived materials
DIN EN 13507:2016-07 (Draft) THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING
PREN 17002 : DRAFT 2016 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION
EN 15655:2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
EN ISO 12944-8:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)
BS EN 448:2015 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN ISO 14918:1998 Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)
I.S. EN ISO 8504-1:2001 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 12944-8:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017)
DIN EN 12952-5:2012-01 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
DIN EN ISO 8503-1:2013-05 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012)
BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
BS EN ISO 13706:2011 Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers
BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
BS EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Extraction of soluble contaminants for analysis. The Bresle method
BS EN ISO 17652-2:2003 Welding. Test for shop primers in relation to welding and allied processes Welding properties of shop primers
ISO 28721-4:2015 Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
BS EN ISO 15783 : 2003 SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION
ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN ISO 14713:1999 Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
BS EN 1337-9:1998 Structural bearings Protection
BS EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
BS EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 1514:2016 Paints and varnishes — Standard panels for testing
BS EN ISO 14921:2010 Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
UNI EN ISO 19902 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
DIN EN 15189:2007-02 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
DIN EN ISO 14921:2011-04 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
EN 12068:1998 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
DIN EN ISO 8502-3:2017-05 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
DIN EN 10300:2006-02 Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
DIN EN 10329:2006-04 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
DIN EN ISO 15711:2005-03 Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003)
DIN EN 10339:2007-05 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
EN 1337-9:1997 Structural bearings - Part 9: Protection
DIN EN 10288:2003-12 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS
DIN EN ISO 15783:2010-04 Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008)
ONORM EN ISO 25457 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
ONORM EN ISO 12736 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
NBR 15239 : 2005 STEEL SURFACES TREATMENT BY MANUAL AND MECHANICAL TOOLS

ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness
ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit
ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag
ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag
ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit
ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning

View more information
€424.88
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.