DIN ISO 8528-5:1997-11
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 5: GENERATING SETS |
DIN ISO 3046-1:1998-01
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - PERFORMANCE - PART 1: STANDARD REFERENCE CONDITIONS, DECLARATIONS OF POWER, FUEL AND LUBRICATING OIL CONSUMPTION AND TEST METHODS |
BIS IS/ISO 8528-4 : 2005(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 4: CONTROLGEAR AND SWITCHGEAR |
03/316171 DC : DRAFT SEP 2003
|
ISO 8528-2 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 2: ENGINES |
16/30295476 DC : 0
|
BS ISO 8528-9 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
03/316174 DC : DRAFT SEP 2003
|
ISO 8528-5 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 5: GENERATING SETS |
BS ISO 21927-10:2011
|
Smoke and heat control systems Specification for power output devices |
14/30297346 DC : 0
|
BS ISO 8528-8 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 8: GENERATING SETS |
BS 7698-10:1999
|
Reciprocating internal combustion engine driven alternating current generating sets Measurement of airborne noise by the enveloping surface method |
BS ISO 26382:2010
|
Cogeneration systems. Technical declarations for planning, evaluation and procurement |
DIN ISO 8528-2:1997-11
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 2: ENGINES |
BS ISO 13380:2002
|
Condition monitoring and diagnostics of machines. General guidelines on using performance parameters |
ISO 26382:2010
|
Cogeneration systems — Technical declarations for planning, evaluation and procurement |
BS ISO 8528-5:2013
|
Reciprocating internal combustion engine driven alternating current generating sets Generating sets |
BIS IS/ISO 8528-5 : 2005(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 5: GENERATING SETS |
ISO 8528-5:2013
|
Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets |
DIN ISO 8528-7:1997-11
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN |
DIN EN 12601:2011-07
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
EN 60034-22:2009
|
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
EN 12601:2010
|
Reciprocating internal combustion engine driven generating sets - Safety |
EN 12101-10:2005/AC:2007
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
EN ISO 8178-4 : 1996
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
EN 88528-11:2004
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
GOST R ISO 8528-3 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 3: ALTERNATING CURRENT GENERATORS FOR GENERATING SETS |
BIS IS/ISO 8178-4 : 2007(R2017)
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
03/316175 DC : DRAFT SEP 2003
|
ISO 8528-6 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 6: TEST METHODS |
00/702358 DC : DRAFT JAN 2000
|
ISO/DIS 13380 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - USE OF PERFORMANCE PARAMETERS - GENERAL GUIDELINES |
11/30229676 DC : 0
|
BS ISO 8528-5 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 5: GENERATING SETS |
I.S. EN 88528-11:2004
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
BS ISO 3046-1:2002
|
Reciprocating internal combustion engines. Performance Declarations of power, fuel and lubricating oil consumptions, and test methods. Additional requirements for engines for general use |
DIN ISO 8528-6:1997-11
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 6: TEST METHODS |
GOST R ISO 8528-6 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 6: TEST METHODS |
10/30211242 DC : 0
|
BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
03/316172 DC : DRAFT SEP 2003
|
ISO 8528-3 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 3: ALTERNATING CURRENT GENERATORS FOR GENERATING SETS |
GOST R ISO 8528-5 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 5: GENERATING SETS |
BIS IS/ISO 8528-10 : 1998(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 10: MEASUREMENT OF AIRBORNE NOISE BY THE ENVELOPING SURFACE METHOD |
PREN 12601 : DRAFT 2010
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
BS ISO 8178-9:2012
|
Reciprocating internal combustion engines. Exhaust emission measurement Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
DIN EN ISO 8528-13 E : 2017
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15) |
DIN EN ISO 8528-13:2014-09 (Draft)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15) |
BS EN 12601:2010
|
Reciprocating internal combustion engine driven generating sets. Safety |
I.S. EN ISO 14224:2016
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
BIS IS/ISO 8528-7 : 1994(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN |
UFC 3-540-01 : CHANGE 1
|
UNIFIED FACILITIES CRITERIA - ENGINE-DRIVEN GENERATOR SYSTEMS FOR PRIME AND STANDBY POWER APPLICATIONS |
BIS IS/ISO 8528-8 : 1995(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 8: REQUIREMENTS AND TESTS FOR LOW-POWER GENERATING SETS |
BS 5514-1:1996
|
Reciprocating internal combustion engines. Performance Standard reference conditions, declarations of power, fuel and lubricating oil consumptions and test methods |
CEI EN 88528-11 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 11: ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
C282-15
|
Emergency electrical power supply for buildings |
BS 7698-9:1996
|
Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations |
BIS IS/ISO 8528-12 : 1997(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 12: EMERGENCY POWER SUPPLY TO SAFETY SERVICES |
UNI ISO 13380 : 2010
|
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS |
11/30217476 DC : 0
|
BS ISO 8178-9 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 9: TEST CYCLES AND TEST PROCEDURES FOR TEST BED MEASUREMENT OF EXHAUST GAS SMOKE EMISSIONS FROM COMPRESSION IGNITION ENGINES OPERATING UNDER TRANSIENT CONDITIONS |
BIS IS/ISO 8528-2 : 2005(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 2: ENGINES |
BS 7698-12:1998
|
Reciprocating internal combustion engine driven alternating current generating sets Emergency power supply to safety devices |
DIN ISO 17359:2011-09
|
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
I.S. HD 60364-7-710:2012
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-710: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MEDICAL LOCATIONS (IEC 60364-7-710:2002 (MOD)) |
10/30200372 DC : 0
|
BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
17/30341578 DC : DRAFT MAY 2017
|
BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
I.S. EN 60034-22:2009
|
ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS |
BIS IS/ISO 8528-9 : 1995(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
NF EN 88528-11 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 11: ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
SAE J 3046/1 : 1994
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - PERFORMANCE - PART 1: STANDARD REFERENCE CONDITIONS, DECLARATIONS OF POWER, FUEL AND LUBRICATING OIL CONSUMPTIONS AND TEST METHODS |
ISO 8528-8:2016
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets |
ISO 21927-10:2011
|
Smoke and heat control systems — Part 10: Specification for power output devices |
ISO 8528-12:1997
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services |
ISO 3046-1:2002
|
Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
ISO 8528-6:2005
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
IEC TS 62257-7-3:2008
|
Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-3: Generator set - Selection of generator sets for rural electrification systems |
ISO 8178-9:2012
|
Reciprocating internal combustion engines Exhaust emission measurement Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
I.S.EN ISO 8528-13:2016&LC:2016
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014) |
IEC 60034-22:2009
|
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
UNE-HD 60364-7-710:2014
|
Low-voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations |
IEC 88528-11:2004
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
ISO 14224:2016
|
Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
ISO 8528-13:2016
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety |
EN ISO 8528-13:2016
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
UNI EN 12601 : 2011
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
BS ISO 8528-4:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Controlgear and switchgear |
I.S. EN 12601:2010
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
NF ISO 8528-7 : 2017
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN |
BS EN 88528-11:2004
|
Reciprocating internal combustion engine driven alternating current generating sets Rotary uninterruptible power systems. Performance requirements and test methods |
BS ISO 8528-6:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Test methods |
BIS IS/ISO 8528-3 : 2005(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 3: ALTERNATING CURRENT GENERATORS FOR GENERATING SETS |
BIS IS/ISO 8528-6 : 2005(R2014)
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 6: TEST METHODS |
BS EN 60034-22:2009
|
Rotating electrical machines AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
DD IEC/TS 62257-7-3:2008
|
Recommendations for small renewable energy and hybrid systems for rural electrification Generator set. Selection of generator sets for rural electrification systems |
16/30334068 DC : 0
|
BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
BS ISO 8178-4:2017
|
Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications |
GOST R ISO 8528-4 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 4: CONTROLGEAR AND SWITCHGEAR |
ISO 8528-2:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines |
ISO 8178-4:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
ISO 8528-9:2017
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
I.S. EN ISO 8528-13:2016
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014) |
GOST R ISO 8528-12 : 2005
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 12: EMERGENCY POWER SUPPLY TO SAFETY SERVICES |
CEI EN 60034-22 : 2011
|
ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS |
ISO 17359:2018
|
Condition monitoring and diagnostics of machines — General guidelines |
ISO 8528-10:1998
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method |
DIN EN 12101-10:2006-01
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
BS EN 12101-10:2005
|
Smoke and heat control systems Power supplies |
UNE-EN ISO 8528-13:2017
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
14/30297343 DC : 0
|
BS EN ISO 8528-13 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY |
12/30266531 DC : 0
|
BS EN TS 62257-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION |
BS EN ISO 8528-13:2016
|
Reciprocating internal combustion engine driven alternating current generating sets Safety |
16/30295473 DC : 0
|
BS ISO 8528-7 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN |
EN 88528-11 : 2004
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 11: ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
BS ISO 8528-8:2016
|
Reciprocating internal combustion engine driven alternating current generating sets Requirements and tests for low-power generating sets |
DIN ISO 8528-3:1997-11
|
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 3: ALTERNATING CURRENT GENERATORS FOR GENERATING SETS |
03/316173 DC : DRAFT SEP 2003
|
ISO 8528-4 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 4: CONTROLGEAR AND SWITCHGEAR |
DIN 6280-13:1994-12
|
GENERATING SETS - RECIPROCATING INTERNAL COMBUSTION ENGINES DRIVEN GENERATING SETS - PART 13: FOR EMERGENCY POWER SUPPLY IN HOSPITALS AND PUBLIC BUILDINGS |
BS ISO 8528-9:2017
|
Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations |
03/117188 DC : DRAFT OCT 2003
|
BS EN 12101-10 - SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
BS ISO 8528-3:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Alternating current generators for generating sets |
BS ISO 8528-2:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Engines |
ISO 13380:2002
|
Condition monitoring and diagnostics of machines General guidelines on using performance parameters |
UNE-EN 60034-22:2010
|
Rotating electrical machines -- Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
ISO 8528-3:2005
|
Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets |
ISO 8528-7:2017
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design |
ISO 8528-4:2005
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear |
BS ISO 8528-7:2017
|
Reciprocating internal combustion engine driven alternating current generating sets Technical declarations for specification and design |
BS EN ISO 14224:2016
|
Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
UNE-EN 12601:2011
|
Reciprocating internal combustion engine driven generating sets - Safety |
HD 60364-7-710:2012/AC:2013
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-710: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MEDICAL LOCATIONS |