BS 2782-5 Method 552A:1981
|
Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light |
NFT 54 018 : 2008
|
UNPLASTICIZED POLY(VINYL CHLORIDE) PIPES AND FITTINGS FOR UNDERGROUND COMMUNICATION LINES - SPECIFICATIONS |
BS ISO 799:2004
|
Ships and marine technology. Pilot ladders |
05/30133330 DC : DRAFT MAY 2005
|
ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING |
PREN 12574-2 : DRAFT 2015
|
STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
15/30323520 DC : 0
|
BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
07/30155372 DC : 0
|
BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
UNE-EN 12899-2:2010
|
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
ASTM G 24 : 2013 : REDLINE
|
Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
PREN 13618 : DRAFT 2009
|
FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
ASTM G 7 : 2005
|
Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
ASTM D 5870 : 2016 : REDLINE
|
Standard Practice for Calculating Property Retention Index of Plastics |
DIN EN 12574-2:2015-08 (Draft)
|
STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN 12899-2:2008-02
|
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
BS EN 12574-2:2017
|
Stationary waste containers Performance requirements and test methods |
BS EN 12899-3:2007
|
Fixed, vertical road traffic signs Delineator posts and retroreflectors |
I.S. EN ISO 7823-1:2003
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
EN ISO 16871:2003
|
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
EN 12574-2:2017
|
Stationary waste containers - Part 2: Performance requirements and test methods |
EN 12899-2:2007
|
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
EN 12899-1:2007
|
Fixed, vertical road traffic signs - Part 1: Fixed signs |
EN 13071 : 2002
|
SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
EN 1056 : 1996
|
METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
EN 12899-3:2007
|
Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
BS ISO 5489:2008
|
Ships and marine technology. Embarkation ladders |
10/30205800 DC : 0
|
BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES |
DD CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
ISO 7823-2:2003
|
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
ASTM D 5857 : 2017 : REDLINE
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
DIN EN 12899-1:2008-02
|
FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
DIN EN 12899-3:2008-02
|
Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
DIN EN 15132 E : 2006
|
CONTAINER SHELLS FOR MOBILE WASTE CONTAINERS WITH A CAPACITY UP TO 1700 L - PERFORMANCE REQUIREMENTS AND TEST METHODS |
ISO 7823-3:2007
|
Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
BS EN ISO 7823-3:2007
|
Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
I.S. EN 12574-2:2017
|
STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN 12574-2:2017-05
|
STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
I.S. EN 12899-1:2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
DIN EN 858-1:2002-05
|
CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
I.S. EN ISO 7823-3:2007
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
VDI 3968 Blatt 5:2009-12
|
Safety of load units - Stretching |
BS 2782-5:Method 552A:1999
|
Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
I.S. EN ISO 16871:2003
|
PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
BS ISO 15686-2:2012
|
Buildings and constructed assets. Service life planning Service life prediction procedures |
17/30368428 DC : 0
|
BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
BS ISO 15314:2004
|
Plastics. Methods for marine exposure |
BS 2782-11.1107A(1996) : 1996
|
PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
03/116049 DC : DRAFT NOV 2003
|
BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
10/30215313 DC : 0
|
BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS |
ASTM G 7/G7M : 2013 : REDLINE
|
Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
ISO 5489:2008
|
Ships and marine technology — Embarkation ladders |
ISO/TR 19032:2006
|
Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
ISO 799:2004
|
Ships and marine technology Pilot ladders |
DIN EN 15132:2006-12
|
Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods |
BS EN 12899-2:2007
|
Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB) |
UNI EN 12899-3 : 2008
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS |
UNI EN 12899-2 : 2008
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 2: TRANSILLUMINATED TRAFFIC BOLLARDS (TTB) |
UNI EN 12899-1 : 2008
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
I.S. EN 13071:2002
|
SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
02/121868 DC : DRAFT APR 2002
|
BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
17/30358594 DC : 0
|
BS ISO 799-1 - SHIPS AND MARINE TECHNOLOGY - PILOT LADDERS - PART 1: DESIGN AND SPECIFICATION |
04/30095062 DC : 0
|
ISO 5489 - SHIPS AND MARINE TECHNOLOGY - EMBARKATION LADDERS |
BS 7825-3.5:1997
|
Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
ISO 6993:2001
|
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels Specifications |
S.R. CEN TS 15534-3:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS |
DIN EN ISO 7823-3:2007-08
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
DIN EN ISO 7823-2:2003-12
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
13/30276640 DC : 0
|
BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
BS EN ISO 7823-2:2003
|
Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
ISO 16871:2003
|
Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering |
ISO 7823-1:2003
|
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
BS EN ISO 7823-1:2003
|
Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
EN 858-1:2002/A1:2004
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
EN 15132:2006
|
Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods |
EN ISO 7823-1:2003
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
EN ISO 7823-2 : 2003
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
EN 1825-1:2004/AC:2006
|
GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
ISO 9553:1997
|
Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
09/30198696 DC : 0
|
BS EN 13618 - FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
07/30127284 DC : 0
|
BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
DD CEN/TS 15534-3:2007
|
Wood-plastics composites (WPC) Characterisation of WPC products |
EN ISO 7823-3:2007
|
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
UNE-EN 12899-3:2010
|
Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
ISO 15314:2004
|
Plastics Methods for marine exposure |
ASTM G 183 : 2015 : REDLINE
|
Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers |
I.S. CEN TS 15354:2006
|
PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
S.R. CEN TS 15534-1:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
DIN EN ISO 7823-1:2003-12
|
PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
BS EN 1056:1996
|
Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
BS EN 1825-1:2004
|
Grease separators Principles of design, performance and testing, marking and quality control |
BS EN ISO 16871:2003
|
Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
BS EN 13071:2002
|
Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
UNE-EN 12574-2:2017
|
Stationary waste containers - Part 2: Performance requirements and test methods |
BS EN 858-1:2002
|
Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
BS EN 15132:2006
|
Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods |
CEN/TS 15534-3:2007
|
Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products |
DIN EN 1825-1:2004-12
|
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
CEN/TS 15354:2006
|
Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |