ISO 898-1:2013

Current

Current The latest, up-to-date edition.

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s):

Published date: 14-01-2013

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures.

Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head.

ISO 898-1:2013 is applicable to bolts, screws and studs

made of carbon steel or alloy steel,
having triangular ISO metric screw thread in accordance with ISO 68-1,
with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,
with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and
having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4.

It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5).

It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.

General Product Information - (Show below) - (Hide below)

Committee	ISO/TC 2/SC 11
Development Note	Supersedes ISO 898-3 (04/2001) Supersedes ISO/DIS 898-1 and SAE J 121M. (01/2013) Corrigendum 1 applies to French version only. (04/2013)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	ISO 898-1:2009

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
JIS B 1051:2014	Identical
GOST R ISO 898-1 : 2011	Identical
UNE-EN ISO 898-1:2015	Identical
NBN EN ISO 898-1 : 2013	Identical
NEN EN ISO 898-1 : 2013	Identical
NS EN ISO 898-1 : 2013 AC 2013	Identical
I.S. EN ISO 898-1:2013	Identical
AS 4291.1:2015	Identical
PN EN ISO 898-1 : 2013	Identical
UNI EN ISO 898-1 : 2013	Identical
SS-EN ISO 898-1:2013	Identical
SN EN ISO 898-1:2013	Identical
BS EN ISO 898-1:2013	Identical
EN ISO 898-1:2013	Identical
NF EN ISO 898-1 : 2013	Identical
DIN EN ISO 898-1:2013-05	Identical
NBN E 27 072 : 1987	Identical
EN 20898-1 : 1991	Identical
SANS 1700-5-1 : 3ED 2011	Identical
UNE-EN 20898-1:1992	Identical
DIN ISO 898-1:1989-01	Similar to
I.S. EN 20898-1:1991	Identical
NBN E 27 071 : 1987	Identical
NBN E 51 006 : 1989	Identical
SAC GB/T 3098.1 : 2010	Identical
UNE 17721:1981	Identical
IS 1367 : Part 3 : 2017	Identical
NBN E 51 003 : 1988	Identical
DIN EN 20898-1:1992-04	Corresponds

Standards Referenced By This Book - (Show below) - (Hide below)

03/319820 DC : DRAFT DEC 2003	EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
BS EN ISO 14582:2013	Fasteners. Hexalobular socket countersunk head screws, high head
BS ISO 19355:2016	Ships and marine technology. Marine cranes. Structural requirements
UNE-EN ISO 7380-2:2012	Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
14/30298880 DC : 0	BS EN ISO 2320 - FASTENERS - PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES
04/30113142 DC : DRAFT MAY 2004	ISO 6182-2 - FIRE PROTECTION. AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
DIN EN ISO 14582 E : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
DIN ISO 8082-1:2016-06	Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1: General machines (ISO 8082-1:2009)
I.S. EN 74-1:2005	COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 24014:1992	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ISO 15698-1:2012	Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements
09/30202626 DC : 0	BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
DIN EN 15865:2009-08	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
16/30341197 DC : 0	BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
12/30254917 DC : DRAFT JAN 2012	BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
10/30199074 DC : 0	BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
03/319369 DC : DRAFT NOV 2003	ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING
UNE-EN 15882-1:2013	Extended application of results from fire resistance tests for service installations - Part 1: Ducts
BS 7316:1990	SPECIFICATION FOR DESIGN AND CONSTRUCTION OF SCREW AND RELATED TYPE COMPRESSORS FOR THE PROCESS INDUSTRY
BS ISO 8082-1:2009 (published 2009-09)	Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures General machines
16/30341790 DC : 0	BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS
13/30275387 DC : 0	BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
DIN EN 15865 E : 2009	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
UNI EN 1090-3 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
10/30234610 DC : DRAFT NOV 2010	BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
GOST R ISO 8082 : 2005	SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - PERFORMANCE REQUIREMENTS AND TEST METHODS
02/710618 DC : DRAFT SEP 2002	BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
DIN EN ISO 21457:2010-12	Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
BS 6607-3:1993	TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - SPECIFICATION FOR TAPERS FOR SPINDLE NOSES
DIN ISO 2936:2016-10	ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS (ISO 2936:2014)
04/30113151 DC : DRAFT MAY 2004	ISO 6182-6 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES
CSA M5700 : 2009	TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS
DIN ISO 8082-2:2016-06	SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM (ISO 8082-2:2011)
15/30319577 DC : 0	BS ISO 15501-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEMS - PART 2: TEST METHODS
BS ISO 2936:1995	ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS
UNE-EN ISO 12474:2011	Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
16/30322067 DC : 0	BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
02/107768 DC : DRAFT DEC 2002	BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
BS EN ISO 4210-2:2015	Cycles. Safety requirements for bicycles Requirements for city and trekking, young adult, mountain and racing bicycles
08/30184289 DC : DRAFT SEP 2008	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
CSA M8082 : 2005 : R2015	SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
PREN 50119 : DRAFT 2017	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
17/30360051 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 1515-4:2009	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
04/19970079 DC : DRAFT JULY 2004	BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - REQUIREMENTS AND TEST METHODS FOR GROOVED END PIPE COUPLINGS
04/30113148 DC : DRAFT MAY 2004	ISO 6182-5 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR DELUGE VALVES
ISO 2936:2014	Assembly tools for screws and nuts Hexagon socket screw keys
UNE-EN 1993-1-8:2013	Eurocode 3: Design of steel structures - Part 1-8: Design of joints
BS 7635(1993) : 1993 AMD 8439	SPECIFICATION FOR SLOTTED CHEESE HEAD SCREWS: PRODUCT GRADE A
BS ISO 15072:2012	Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
BS EN 13565-1 : 2003	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
CSA M12003-2 : 2009 : FR	AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS
06/30110083 DC : 0	ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL
BS EN 61518:2001	MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
NF ISO 9270-2 : 2010	7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
VDMA 24408 : DRAFT 2015	LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
BIS IS 2269 : 2006	HEXAGON SOCKET HEAD CAP SCREWS
NF EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
DIN EN ISO 7380-1:2011-11	Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
DIN EN ISO 3471:2010-01	Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008); German version EN ISO 3471:2008
DIN ISO 8083 E : 2016	MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 8083:2006)
PREN 14399-8 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 27850:2013	Tractors for agriculture and forestry — Falling object protective structures — Test procedures and performance requirements
DIN EN 15609 E : 2012	LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
BIS IS 12427 : 2001	FASTENERS - THREADED STEEL FASTENERS - HEXAGON HEAD TRANSMISSION TOWER BOLTS - SPECIFICATION
ISO 7076-3:2016	Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
PREN 3794 : 200P1	AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS
SAE USCAR 35 : 2007	TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS
DIN EN 14399-10:2016-01 (Draft)	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
S.R. CEN TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
UNI ISO 10262 : 2008	EARTH-MOVING MACHINERY - HYDRAULIC EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR OPERATOR PROTECTIVE GUARDS
I.S. EN 13445-2:2014	UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
ISO 8082-1:2009	Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Part 1: General machines
I.S. EN 13565-1:2004	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
I.S. EN ISO 16047:2005	FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005)
UNI EN 74-2 : 2009	COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
BS EN 13001-3-1 : 2012	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
ISO 5480:1979	Shipbuilding Guardrails for cargo ships
EN 14399-8:2007	High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
ISO 8010:1988	Compressors for the process industry — Screw and related types — Specifications and data sheets for their design and construction
DD CEN/TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
UNI EN 13001-3-1 : 2013	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNE-EN 74-2:2010	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
13/30286967 DC : 0	BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
UNE-EN ISO 12215-9:2013	Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
16/30336501 DC : 0	BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
UNI EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
16/30319005 DC : 0	BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
DIN EN 1090-3:2008-09	EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
MSS SP 124 : 2016	FABRICATED TAPPING SLEEVES
I.S. EN 15865:2009	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
BS EN 12285-1:2003	WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
DIN EN 12285-1:2016-10 (Draft)	WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
EN 15048-1:2016	Non-preloaded structural bolting assemblies - Part 1: General requirements
IEC 60335-2-37:2017	Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
I.S. EN ISO 16136:2006	INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 10642:2004	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004)
EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
I.S. EN 13480-2:2017	METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
I.S. EN ISO 16138:2006	INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16139:2006	INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 21787:2006	INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
I.S. EN ISO 16135:2006	INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
ONORM EN ISO 16139 : 2008	INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16137:2006	INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 3269:2000	FASTENERS - ACCEPTANCE INSPECTION
BS EN 13480-2:2017	Metallic industrial piping Materials
DIN EN 14399-2:2015-04	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING
DIN EN 1759-1:2005-02	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN ISO 7045:2011-12	Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
DIN EN ISO 10642:2013-04	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
DIN EN 14359 E : 2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN ISO 21670:2014-09	FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
BS EN ISO 7085:1999	Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
BS EN ISO 13628-1 : 2005	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN 12259-3:2000	Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies
BS EN 13531 : 2001	EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS EN ISO 4762:2004	Hexagon socket head cap screws
UNE-EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
BS EN ISO 7045:2011	Pan head screws with type H or type Z cross recess. Product grade A
BS EN 877 : 1999	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS EN ISO 16135:2006 (published 2006-03)	Industrial valves. Ball valves of thermoplastic materials
BS EN 14399-1:2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
14/30278953 DC : 0	BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS EN 12259-2:1999	Fixed firefighting systems. Components for sprinkler and water spray systems Wet alarm valve assemblies
ISO 4016:2011	Hexagon head bolts Product grade C
BS EN ISO 14579:2011	Hexalobular socket head cap screws
BS EN 1662:1998	HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO/DIS 15071:1996, MODIFIED)
ISO 7085:1999	Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
BS EN 14420-3:2013	Hose fittings with clamp units Clamp units, bolted or pinned
BS EN ISO 16139:2006	Industrial valves. Gate valves of thermoplastic materials
ISO 10964:1993	Adhesives Determination of torque strength of anaerobic adhesives on threaded fasteners
I.S. EN ISO 21269:2004	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN ISO 2010:2011	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
I.S. EN ISO 4018:2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
I.S. EN ISO 7045:2011	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
I.S. EN 877:2000	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 15609:2012	LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
DIN EN ISO 4017:2015-05	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN 13411-5:2009-02	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
DIN EN 12952-14:2004-09	Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
DIN ISO 965-1:1999-11	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
CEN/TS 1992-4-1:2009	Design of fastenings for use in concrete - Part 4-1: General
EN 12259-5:2002	Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN 13411-5:2003+A1:2008	Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
EN 12285-2 : 2005	WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
UNI EN 877 : 2007	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 12561-6:2011 (edition 2)	Railway applications - Tank wagons - Part 6: Manholes
EN 12259-3:2000/A2:2005	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
DIN EN 1090-2:2011-10	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13001-3-1:2012+A2:2018	Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
CEN/TS 13001-3-1:2004/AC:2006	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN ISO 3471:2008	Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
EN 877:1999/A1:2006/AC:2008	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 12979:2002	Automotive LPG-systems - Installation requirements
EN 12763:2000	Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
EN 13531:2001+A1:2008	Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
DIN EN 14399-8:2008-03	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
NBR 15926-2 : 2011 ERRATA 2011	EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT
ONORM EN 15001-1 : 2011	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
DEFSTAN 02-313/1(2000) : 2000 AMD 1 2002	DIESEL ENGINES FOR MARINE PROPULSION AND AUXILIARY MACHINERY
NF EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
ONORM B 1995-1-1 : 2015	EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS - NATIONAL SPECIFICATIONS FOR THE IMPLEMENTATION OF ONORM EN 1995-1-1, NATIONAL COMMENTS AND NATIONAL SUPPLEMENTS
ONORM EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
ONORM EN ISO 14581 : 2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
ONORM EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
02/108142 DC : DRAFT DEC 2002	BS EN ISO 3449 - EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
EN 14423:2013+A1:2016	Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
10/30165716 DC : 0	BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
ISO 20332:2016	Cranes Proof of competence of steel structures
17/30364387 DC : 0	BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
DIN 787:2005-02	Bolts and screws for T-slots
13/30277104 DC : 0	BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS ISO 27850:2013	TRACTORS FOR AGRICULTURE AND FORESTRY - FALLING OBJECT PROTECTIVE STRUCTURES - TEST PROCEDURES AND PERFORMANCE REQUIREMENTS
09/30203245 DC : 0	BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
I.S. EN 1090-3:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 15609:2012-07	LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
06/30150470 DC : DRAFT MAY 2006	ISO 12003-1 - AGRICULTURAL AND FORESTRY TRACTORS NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROLL-OVER PROTECTIVE STRUCTURES
16/30323815 DC : 0	BS ISO 6182-4 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 4: REQUIREMENTS AND TEST METHODS FOR QUICK-OPENING DEVICE
I.S. EN 24018:1992	HEXAGONAL HEAD SCREWS - PRODUCT GRADES C
PREN 1090-3 : DRAFT 2017	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
BS ISO 8082:2003 (published 2003-07)	Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements
DIN ISO 8083:2016-06	MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 8083:2006)
11/30237817 DC : 0	BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
09/30208217 DC : 0	BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
DIN EN 15001-1:2011-02	Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
UNE-EN 15048-1:2018	Non-preloaded structural bolting assemblies - Part 1: General requirements
I.S. EN ISO 16228:2018	FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
NF ISO 8082-1 : 2011	SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES
17/30341013 DC : DRAFT AUG 2017	BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN ISO 8082-2 E : 2016	SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM (ISO 8082-2:2011)
DIN EN ISO 4210-2:2015-12	CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 42102:2015)
10/30234330 DC : DRAFT DEC 2010	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
BS ISO 16858:2013	Ships and marine technology. Loose gear of lifting appliances on ships. Pulleys
11/30215604 DC : 0	BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
11/30237814 DC : 0	BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
BS ISO 5480:1979	SHIPBUILDING - GUARDRAILS FOR CARGO SHIPS
07/30166055 DC : 0	BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
DIN 3015-2:1999-01	Fastening clamps - Block clamps - Part 2: Heavy duty (S)
11/30232899 DC : 0	BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
DIN 3015-1:1999-01	Fastening clamps - Block clamps - Part 1: Light duty (L)
BS EN 15609:2012 (published 2012-05)	LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft
ONORM EN 1515-4 : 2010	FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
UNI EN 1515-4 : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
04/19969165 DC : 0	BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVE ASSEMBLIES
12/30264722 DC : 0	BS ISO 965-1 - ISO GENERAL-PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA
BS HD 60269-2:2013	Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
PREN 14389-2 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DD CEN/TS 13001-3-1 : 2004	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
NF ISO 10643 : 2010	DIMENSIONS OF ACCESSORIES FOR CUTTER ARBORS WITH PARALLEL KEY AND TENON DRIVE
03/314812 DC : DRAFT SEP 2003	ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
08/30184358 DC : 0	BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
06/30150478 DC : DRAFT MAY 2006	ISO 12003-2 - AGRICULTURAL AND FORESTRY TRACTORS NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROLL-OVER PROTECTIVE STRUCTURES
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
09/30155621 DC : 0	BS ISO 15698-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 2: TEST METHODS
UNI CEN/TS 1992-4-1 : 2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
UNE 135314:2017	Vertical signs. Galvanized steel profiles used as post of the signs, side posters and directional signs. Moving supporting elements. Screw products. Characteristics and test methods.
CSA M12003-1:2009	AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROPS
08/30184361 DC : 0	BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
BS EN 15865:2009	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
04/30113145 DC : DRAFT MAY 2004	ISO 6182-3 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES
IS 1367 : Part 1 : 2014	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
CAN/CSA-M3471 : 2005(R2015)	EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
DIN 3015-3:1999-01	Fastening clamps - Block clamps - Part 3: Double clamps (Z)
UNE-EN 1090-2:2011	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
DIN EN ISO 7380-2:2011-11	Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
DIN ISO 3269:1992-12	FASTENERS - ACCEPTANCE INSPECTION
API 17L1 : 2013	SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
UNI EN ISO 14582 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
EN 1366-5:2010	Fire resistance tests for service installations - Part 5: Service ducts and shafts
UNE-EN 14399-1:2016	High-strength structural bolting assemblies for preloading - Part 1: General requirements
UNE-EN 14399-4:2016	High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
DIN EN 61518:2002-06	MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
NF EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
IEC 60269-2:2013+AMD1:2016 CSV	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
ISO 9270:1992	7/24 tapers for tool shanks for automatic changing Tapers for spindle noses
ISO 16858:2013	Ships and marine technology — Loose gear of lifting appliances on ships — Pulleys
I.S. EN ISO 7380-2:2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
DIN EN 14399-8:2016-01 (Draft)	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV	Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
BS EN ISO 7380-2:2011	Button head screws Hexagon socket button head screws with collar
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
UNI EN ISO 21457 : 2010	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
BS EN 15882-1 : 2011	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
I.S. EN ISO 12474:2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN ISO 11243:2016	CYCLES - LUGGAGE CARRIERS FOR BICYCLES - REQUIREMENTS AND TEST METHODS (ISO 11243:2016)
BS EN 13611:2015	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
I.S. HD 60269-2-1:2005	LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES
I.S. CEN TS 13001-3-1:2005	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
ISO 8082-2:2011	Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Part 2: Machines having a rotating platform with a cab and boom on the platform
ISO 8678:1988	Cup head square neck bolts with small head and short neck Product grade B
ISO 8082:2003	Self-propelled machinery for forestry Roll-over protective structures Laboratory tests and performance requirements
EN 15882-1:2011+A1:2017	Extended application of results from fire resistance tests for service installations - Part 1: Ducts
PREN ISO 1207 : DRAFT 2009	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
PREN 14399-10 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNI EN ISO 12215-9 : 2012	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES
UNI EN 14399-10 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
ISO 15071:2011	Hexagon bolts with flange Small series Product grade A
SAE J 518/3 : 2015	HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
ISO 8992:2005	Fasteners — General requirements for bolts, screws, studs and nuts
UNI EN ISO 7048 : 2011	CROSS-RECESSED CHEESE HEAD SCREWS
EN 13565-1:2003+A1:2007	Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
DIN EN 1090-2:2015-07 (Draft)	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
ONORM EN ISO 16136 : 2008	INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
I.S. EN 50119:2009	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
ONORM EN ISO 16137 : 2008	INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN 877:2010-01	Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
DIN EN 13411-5 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
DIN EN 12285-2:2005-05	WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
DIN EN 1993-1-8:2010-12	Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009)
DIN EN ISO 8676:2011-07	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
DIN EN ISO 8765:2011-06	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN 14475:2006-04	EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN ISO 898-5:2012-09	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
DIN EN 14359:2011-04	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN ISO 3506-1:2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
UNE-EN ISO 1207:2011	Slotted cheese head screws - Product grade A (ISO 1207:2011)
UNE-EN ISO 14584:2011	Hexalobular socket raised countersunk head screws (ISO 14584:2011)
ISO 16136:2006	Industrial valves Butterfly valves of thermoplastics materials
UNE-EN ISO 21670:2015	Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
ONORM EN ISO 10642 : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012)
BS EN ISO 10440-2:2001 (published 2002-10)	Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
ISO 10642:2004	Hexagon socket countersunk head screws
BS EN 15048-1:2007	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
UNE-EN ISO 7046-1:2012	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)
BS EN 14389-1:2015	Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
13/30272150 DC : 0	BS EN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURE - SAFETY
UNE-EN ISO 2010:2012	Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
BS EN ISO 7047:2011	Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN 1665:1997	Hexagon bolts with flange. Heavy series
I.S. EN 1366-1:2014	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
EN 1366-1:2014	Fire resistance tests for service installations - Part 1: Ventilation ducts
I.S. EN ISO 4762:2004	HEXAGON SOCKET HEAD CAP SCREWS
I.S. EN 14389-2:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 14399-3:2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN 14399-4:2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN ISO 14583:2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
I.S. EN ISO 21670:2014	FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
I.S. EN ISO 7085:2000	MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
DIN EN 74-1:2005-12	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
DIN EN ISO 7046-2:2011-12	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
OVE/ONORM EN 50119 : 2014	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN ISO 7380:2004-05	HEXAGON SOCKET BUTTON HEAD SCREWS
DIN EN 24014:1992-02	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN 14420-3:2013-09	HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
I.S. EN ISO 8676:2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN 13611:2019-06	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 2320:2015	FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
DIN EN ISO 10964:1997-10	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
I.S. EN ISO 7047:2011	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
I.S. EN 13531:2001	EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
DIN EN 13852-2:2005-03	Cranes - Offshore cranes - Part 2: Floating cranes
I.S. EN ISO 7046-2:2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
DIN EN 1366-1:2014-12	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN ISO 4016:2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
I.S. EN ISO 14580:2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
I.S. EN ISO 13628-1:2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN ISO 14579:2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
I.S. EN ISO 4017:2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
I.S. EN ISO 1580:2011	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
I.S. EN 15048-2:2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN ISO 7046-1:2011-12	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
I.S. EN ISO 8765:2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN 14399-3:2015-04	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN ISO 14584:2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
I.S. EN 14420-3:2013	HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
I.S. EN ISO 7048:2011	CROSS-RECESSED CHEESE HEAD SCREWS
DIN EN 24017:1992-02	HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
I.S. EN 12561-6:2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
I.S. EN 13411-5:2003	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
I.S. EN ISO 898-5:2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
I.S. EN ISO 1207:2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
I.S. EN ISO 3449:2008	EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
I.S. EN ISO 2009:2011	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
I.S. EN 14399-2:2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING
I.S. EN ISO 7046-1:2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
DIN EN 24018:1992-02	HEXAGON HEAD SCREWS - PRODUCT GRADE C
I.S. EN 14359:2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN 14389-1:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 14399-1:2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 4014:2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
BS 6912-6(2000) : 2000	EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
ONORM EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4017 : 2015	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
NBR ISO 8082-1 : 2016	SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES
NF EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
NF EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
VDI 2230 Blatt 1:2003-02	Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt
NF EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
BS 88-2(2013) : 2013 COR 2014	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
ONORM EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
NF EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
NBR 11900-4 : 2016	TERMINATIONS FOR STEEL WIRE ROPES - PART 4: WEIGHTLESS AND WEIGHED CLAMPS
ONORM EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ONORM EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
BS 88-2(2010) : 2010	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
BS ISO 965-1:2013	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA
BIS IS/ISO 3471 : 2008(R2017)	EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS 7321:1990	SPECIFICATION FOR DESIGN AND CONSTRUCTION OF TURBO-TYPE COMPRESSORS FOR THE PROCESS INDUSTRY
12/30204616 DC : 0	BS ISO 5700 - TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS
18/30351048 DC : 0	BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS
BS ISO 4162:2012	Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
PREN 14389-1 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
UNI EN ISO 3471 : 2008	EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
16/30341798 DC : 0	BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM
11/30214913 DC : 0	BS ISO 6182-2 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
I.S. EN 15001-1:2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
BS EN ISO 12474:2010	Hexagon socket head cap screws with metric fine pitch thread
I.S. EN ISO 10964:1998	ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
I.S. EN ISO 4210-2:2015	CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 4210-2:2015)
BS ISO 19354:2016	Ships and marine technology. Marine cranes. General requirements
06/30125306 DC : 0	EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
PREN 50069 : DRAFT 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
15/30280562 DC : 0	BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
15/30299570 DC : 0	BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6])
16/30328642 DC : 0	BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS
DIN ISO 8992:2005-09	Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
BS 6912-6:1992	SAFETY OF EARTH-MOVING MACHINERY - SPECIFICATION FOR FALLING-OBJECT PROTECTIVE STRUCTURES ON EARTH-MOVING MACHINERY: LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
ONORM EN 1366-5 : 2010	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
CEI 32-12 : 2014	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
SAE USCAR 11-1 : 2007	DUPLICATE RECORD
00/707659 DC : DRAFT APR 2000	PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
BS EN ISO 3471:2008	Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements
09/30188143 DC : DRAFT OCT 2009	BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
09/30167487 DC : 2009	BS ISO 21457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
BS 7796:1995	SPECIFICATION FOR HYDRAULIC FLUID POWER - FOUR-SCREW SPLIT-FLANGE CONNECTIONS FOR USE AT PRESSURES OF 2,5 MPA TO 40 MPA (25 BAR TO 400 BAR) - TYPE 1 METRIC SERIES AND TYPE 2 INCH SERIES
16/30341810 DC : 0	BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
BS EN 74-2:2008	Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
04/30113154 DC : DRAFT MAY 2004	ISO 6182-8 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR PRE-ACTION DRY ALARM VALVES
17/30347443 DC : DRAFT JUN 2017	BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
02/711527 DC : DRAFT SEP 2002	ISO 10684 - FASTENERS - HOT DIP GALVANIZED COATINGS
15/30332551 DC : 0	BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
BS ISO 965-4:1998	ISO general purpose metric screw threads. Tolerances Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 8082-2:2011	SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM
UNI CEN/TS 13001-3-1 : 2005	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
BS EN 50119 : 2009	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
14/30260020 DC : 0	BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
CAN/CSA-M12117 : 2005(R2015)	EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS ISO 10643:2009	Dimensions of accessories for cutting tools and their attachments
ISO 19355:2016	Ships and marine technology — Marine cranes — Structural requirements
ASTM F 2437/F2437M : 2017 : REDLINE	Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs