• Shopping Cart
    There are no items in your cart

ISO 9227:2017

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by

Corrosion tests in artificial atmospheres — Salt spray tests

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

11-11-2022

Superseded by

ISO 9227:2022

Language(s)

English, French

Published date

17-03-2017

€60.00
Excluding VAT

ISO 9227:2017 specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection.

It also describes the method employed to evaluate the corrosivity of the test cabinet environment.

It does not specify the dimensions or types of test specimens, the exposure period to be used for a particular product, or the interpretation of results. Such details are provided in the appropriate product specifications.

The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings.

The neutral salt spray (NSS) test particularly applies to

- metals and their alloys,

- metallic coatings (anodic and cathodic),

- conversion coatings,

- anodic oxide coatings, and

- organic coatings on metallic materials.

The acetic acid salt spray (AASS) test is especially useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.

The copper-accelerated acetic acid salt spray (CASS) test is useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.

The salt spray methods are all suitable for checking that the quality of a metallic material, with or without corrosion protection, is maintained. They are not intended to be used for comparative testing as a means of ranking different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material.

DevelopmentNote
Supersedes ISO 3770, ISO 3769 and ISO 3768. (04/2001) Supersedes ISO 7253. (07/2006) Supersedes ISO/DIS 9227. (03/2017)
DocumentType
Standard
Pages
18
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

XP E29 826 : 2017 XP STAINLESS STEEL PLIABLE CORRUGATED HOSE KITS FOR GAS WITH AN OPERATING PRESSURE UP TO 2 BAR
SAE J2552_201406 Push-On Hose and Mating Hose Fittings
BS EN 62444:2013 Cable glands for electrical installations
17/30354650 DC : DRAFT SEP 2017 BS EN 71-14 - SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
UNE-EN ISO 13129:2013 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
BS ISO 17268 : 2012 GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES
ISO/TS 18684:2015 Timekeeping instruments Watch external parts made of hard materials General requirements and test methods
BS EN ISO/IEC 10373:1995 Identification cards. Test methods
BS EN 15288-1 : 2008 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS EN ISO 8936:2017 Awnings for leisure accommodation vehicles. Requirements and test methods
06/30153650 DC : DRAFT JULY 2006 EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
UNE-EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10)
UNI EN ISO 16151 : 2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
10/30228056 DC : 0
UNI EN ISO 4521 : 2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
05/30125061 DC : DRAFT MAR 2005 ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS
DIN EN 16716:2015-08 (Draft) MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
13/30283193 DC : 0 BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS
95/108834 DC : DRAFT NOV 1995 PREN 12209-2 - BUILDING HARDWARE - LOCKS AND LATCHES - PART 2: STRIKING PLATES FOR MECHANICALLY OPERATED LOCKS AND LATCHES - REQUIREMENTS AND TEST METHODS
BS EN ISO 15730:2016 Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel
06/30156314 DC : 0 BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
16/30341197 DC : 0 BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
DIN EN ISO 2080:2009-08 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS ISO 12991:2012 Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
16/30340613 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
ONORM EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
09/30187671 DC : 0 BS EN ISO 7599 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
05/30128692 DC : DRAFT FEB 2005 ISO 8168 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT- AND CORROSION-RESISTANT STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION
11/30229694 DC : 0 BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
PREN 1442 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
13/30279702 DC : 0 BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 12373-1:2001 ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
UNI EN ISO 2080 : 2009 METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY
15/30327431 DC : 0 BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES
UNI EN 15714-4 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
05/30129619 DC : DRAFT FEB 2005 IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT
12/30197523 DC : 0 BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
BS EN ISO 2919:2014 Radiological protection. Sealed radioactive sources. General requirements and classification
99/718298 DC : DRAFT DEC 1999 PREN 13785 - REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100KGH
BS EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
12/30247181 DC : DRAFT JAN 2012 BS ISO 28340 - COMBINED COATINGS ON ALUMINIUM - GENERAL SPECIFICATIONS FOR COMBINED COATINGS OF ELECTROPHORETIC ORGANIC COATINGS AND ANODIC OXIDATION COATINGS ON ALUMINIUM
07/30168404 DC : DRAFT DEC 2007 BS EN 508-1 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
BS ISO 8434-1 : 94 AMD 9583 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS
PREN 62275 : DRAFT 2014 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED)
02/103309 DC : DRAFT MAY 2002 BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B
14/30309758 DC : 0 BS EN ISO 4623-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES
10/30200337 DC : 0 BS EN ISO 13129 - PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMMETRY (RV) OR DC TRANSIENT (DCT) MEASUREMENTS
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
IEC 62444:2010 Cable glands for electrical installations
15/30323936 DC : 0 BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
06/30111976 DC : 0 EN 354 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM HEIGHT - LANYARDS
BS EN 4704:2012 Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
10/30196552 DC : 0 BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
PREN ISO 10380 : DRAFT 2011 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
12/30237859 DC : 0 BS ISO 16539 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS -"DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY
ISO 16024:2005 Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems
98/714983 DC : DRAFT SEP 1998 ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS ISO 12151-2:2003 Connections for hydraulic fluid power and general use. Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings
SAE J1453/1_201205 Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests
NF EN ISO 10862 : 2009 SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
BS ISO 8434-2:2007 Metallic tube connections for fluid power and general use 37° flared connectors
BS ISO 17746:2016 Steel wire rope net panels and rolls. Definitions and specifications
00/715331 DC : 0 ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
BS 2A 302:2000 Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification
ISO 12151-3:2010 Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
10/30216811 DC : 0 BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION
15/30315879 DC : 0 BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
11/30232164 DC : 0 BS ISO 12140 - AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
I.S. EN 15646:2009 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
BS EN 3021:2017 Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification
02/564504 DC : DRAFT OCT 2002 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
00/702974 DC : DRAFT JAN 2000
93/706720 DC : 0 PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
08/30175210 DC : DRAFT APR 2008 BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
PREN 358 : DRAFT 2015 PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT
06/30146267 DC : DRAFT FEB 2006 ISO 11154 - ROAD VEHICLES - ROOF LOAD CARRIERS
04/30126819 DC : DRAFT DEC 2004 EN 15096 - HOSE UNION ANTI-VACUUM VALVES - DN15 TO DN25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
98/714984 DC : DRAFT SEP 1998 ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS
00/107336 DC : DRAFT OCT 2000 PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D
DIN EN 15288-1:2010-12 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
ISO 4042:1999 Fasteners Electroplated coatings
BS ISO 4148:2004 Road vehicles. Special warning lamps. Dimensions
BS EN 12966:2014 Road vertical signs. Variable message traffic signs
99/104927 DC : DRAFT JUN 1999 PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS
CSA Z259.12 : 2011 : R2016 CONNECTING COMPONENTS FOR PERSONAL FALL-ARREST SYSTEMS (PFAS)
IEEE 1591.2-2017 IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
05/30128668 DC : DRAFT FEB 2005 ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT
06/30112897 DC : DRAFT AUG 2006 EN 1670 - BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
UNE-EN 15646:2010 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
03/103084 DC : DRAFT FEB 2003 EN 1497 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES
BS ISO 12151-5:2007 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends
CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R2017 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
BS ISO 1458:2002 Metallic coatings. Electrodeposited coatings of nickel
CEI EN 61537 : 2007 CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
ISO 16253:2017 Watch-cases and accessories — Vapour phase deposited coatings
07/30166909 DC : DRAFT AUG 2007 BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
PREN 2642 : 200P1 AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION
CSA ISO/IEC 10373-1:2007 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
PREN 14225-2 : DRAFT 2014 DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
PREN 2583 : DRAFT 2018 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
DIN EN 16927 E : 2017 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
ISO 4039-1:1998 Road vehicles — Pneumatic braking systems — Part 1: Pipes, male fittings and tapped holes with facial sealing surface
PREN 3021 : DRAFT 2015 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
PREN 4827 : DRAFT 2015 AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 358:2000 PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS
DIN EN 71-14:2015-03 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
I.S. EN 16927:2017 MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
ISO 12619-2:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
BS EN 4827:2017 Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
SAE J2995_201703 Strength and Durability Testing for Automotive Hydraulic Brake Components
I.S. EN 3021:2017 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
ISO 15171-2:2016 Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure
I.S. EN ISO 12401:2009 SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS
ISO 14469-3:2006 Road vehicles Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector
ISO 4039-2:1998 Road vehicles — Pneumatic braking systems — Part 2: Pipes, male fittings and holes with conical sealing surface
I.S. EN 13565-1:2004 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
BS EN ISO 11130:2018 Corrosion of metals and alloys. Alternate immersion test in salt solution
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
ISO 28278-1:2011 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
I.S. EN 16207:2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
I.S. EN ISO 7599:2018 ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM (ISO 7599:2018)
ISO 6742-4:2015 Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement
ISO 25537:2008 Glass in building — Silvered, flat-glass mirror
ISO 16539:2013 Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
EN 14225-2:2017 Diving suits - Part 2: Dry suits - Requirements and test methods
I.S. EN ISO 14469:2017-10 ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR (ISO 14469:2017)
DIN EN 14428:2015-09 SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
ISO 5858:1999 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C Procurement specification
16/30340711 DC : 0 BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION
BS EN 14225-2:2017 Diving suits Dry suits. Requirements and test methods
17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
UNE-EN ISO 2081:2010 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008)
BS EN ISO 12944-6:2018 Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods
BS EN ISO 2081:2018 Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
SAE J1502_201305 Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
BS EN 71-14 : 2014 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
ISO 23269-2:2011 Ships and marine technology — Breathing apparatus for ships — Part 2: Self-contained breathing apparatus for shipboard firefighters
BS EN ISO 10683:2014 Fasteners. Non-electrolytically applied zinc flake coatings
I.S. EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
UNE-EN ISO 10683:2015 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
BS EN ISO 4042:2000 Fasteners. Electroplated coatings
EN ISO 4042:1999 Fasteners - Electroplated coatings (ISO 4042:1999)
UNE-EN 15288-1:2009 Swimming pools - Part 1: Safety requirements for design
DIN EN ISO 2081:2016-04 (Draft) METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
ISO 14469-1:2004 Road vehicles Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector
EN ISO 12944-9:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
ASTM B 912 : 2002 : R2018 Standard Specification for Passivation of Stainless Steels Using Electropolishing
ISO 22779:2006 Metallic coatings — Physical vapour-deposited coatings of aluminium — Specification and test methods
NF EN 2516 : 1997 AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS
I.S. EN 2516:1997 AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS
ISO 11997-1:2017 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
IEC 61035-2-4:1995 Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy
ISO/IEC 10373:1993 Identification cards Test methods
EN 2516:1997 Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys
I.S. EN ISO 17872:2007 PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING
BS EN 13120 : 2009 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN 1670:2007-06 Building hardware - Corrosion resistance - Requirements and test methods
DIN EN 13261:2011-01 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
DIN EN 13434:2006-05 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B
DIN EN 13561:2015-08 External blinds and awnings - Performance requirements including safety
DIN EN 13433:2006-05 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A
DIN EN 12195-2:2001-02 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES
BS EN ISO 12402-7 : 2007 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 12966-1 : 2005 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
BS EN 13785 : 2005 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 14200:2004 Railway applications. Suspension components. Parabolic springs, steel
BS EN 14454:2005 Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A
BS EN 813:1997 Personal protective equipment for prevention of falls from a height. Sit harnesses
UNE-EN ISO 4623-2:2016 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)
BS EN 13146-6:2012 Railway applications. Track. Test methods for fastening systems Effect of severe environmental conditions
BS EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
UNE-EN 354:2011 Personal fall protection equipment - Lanyards
UNE-EN ISO 3613:2011 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010)
BS EN 12806:2003 Automotive liquefied petroleum gas components. Other than containers
BS EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder
UNE-EN 671-2:2013 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
BS EN 13523-8:2017 Coil coated metals. Test methods Resistance to salt spray (fog)
BS EN 341:2011 Personal fall protection equipment. Descender devices for rescue
UNE-EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
BS EN 14267:2004 Irrigation techniques. Irrigation hydrants
ISO 12402-7:2006 Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
BS EN 13786 : 2004 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 13802:2013 Railway applications. Suspension components. Hydraulic dampers
BS EN 12195-2:2001 Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres
UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 12899-3:2007 Fixed, vertical road traffic signs Delineator posts and retroreflectors
BS EN 354:2010 Personal fall protection equipment. Lanyards
BS EN ISO 8434-4:2000 Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples
BS EN 14453:2005 Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C
BS EN ISO 3613:2010 Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
BS EN 3-7 : 2004 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 13261 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 13246:2001 Packaging. Specification for tensional steel strapping
UNE-EN 13146-6:2012 Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions
BS EN 13433:2007 Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A
BS EN 14566 : 2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 393:1994 Lifejackets and personal buoyancy aids. Buoyancy aid 50
BS EN 1497:2007 Personal fall protection equipment. Rescue harnesses
BS EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
BS EN 1498:2006 Personal fall protection equipment. Rescue loops
EN 2133:2010 Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
I.S. EN 10223-7:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
DIN EN 14195:2015-03 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 3-7:2007-10 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
EN 10223-7:2012 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
DIN EN 14800:2007-06 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 12676-2:2000 Anti-glare systems for roads - Part 2: Test methods
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 12729:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
DIN EN 15496:2008-04 Cycles - Requirements and test methods for cycle locks
EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
DIN EN 508-1:2000-12 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN ISO 12401:2009 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
I.S. EN 13760:2003 AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS
EN 13433:2006 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
DIN EN 1496:2017-03 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers
EN ISO 2082:2017 Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)
EN 12540 : 2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM
EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
DIN ISO 12151-2:2004-01 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24? cone connector ends with O-rings (ISO 12151-2:2003)
UNI EN 14601 : 2010 RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE
DIN EN ISO 10683:2001-02 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
DIN EN 14453:2005-08 Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005
EN 13071 : 2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
UNI EN 508-1 : 2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN ISO 1456:2009 Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
EN 12330 : 2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL
EN ISO 2080:2009 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)
EN 12966-1:2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product standard
EN 12476:2000 Phosphate conversion coatings of metals - Method of specifying requirements
EN 13246:2001 Packaging - Specification for tensional steel strapping
EN 13146-6:2012 Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
DIN EN ISO 8434-1:2008-02 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 12899-3:2007 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
DIN EN 71-14:2017-11 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
DIN EN ISO 4527:2003-10 METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS
DIN EN ISO 17268:2017-03 Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012)
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
DEFSTAN 42-34/2(1997) : 1997 EXTINGUISHERS, FIRE, WHEELED TYPE - 90 LITRE FOAM, AIR TRANSPORTABLE/GROUND USE
I.S. EN 13200-4:2006 SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
I.S. EN 12729:2002 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - CONTROLLABLE BACKFLOW PREVENTER WITH REDUCED PRESSURE ZONE - FAMILY B - TYPE A
ONORM EN 14428 : 2015 SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
ONORM EN 15714-3 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
02/714197 DC : DRAFT DEC 2002 PREN 14601 - RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE
BS EN ISO 14469:2017 Road vehicles. Compressed natural gas (CNG) refuelling connector
ISO 10333-1:2000 Personal fall-arrest systems — Part 1: Full-body harnesses
ISO 10333-5:2001 Personal fall-arrest systems — Part 5: Connectors with self-closing and self-locking gates
DIN EN ISO 16151:2008-07 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS
11/30194638 DC : 0 BS ISO 12991 - LIQUEFIED NATURAL GAS (LNG) - TRANSPORTABLE TANKS FOR USE ON BOARD VEHICLES
11/30218155 DC : 0 BS EN ISO 10380 - PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
I.S. EN ISO 8434-1:2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 16451:2015 Railway applications. Braking. Brake pad holder
12/30276397 DC : 0 BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY)
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
97/704453 DC : DRAFT MAR 1997 ISO/DIS 11154-2 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 2: ACCESSORIES AND THEIR ATTACHMENTS TO ROOF BARS FOR SPECIAL PURPOSE APPLICATIONS
DIN EN 1866:2006-03 MOBILE FIRE EXTINGUISHERS
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
CSA Z259.2.3 : 2016 DESCENT DEVICES
11/30241848 DC : 0 BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN 12330:2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL
BS EN 14506:2005 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
15/30322585 DC : 0 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 12329:2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL
12/30271676 DC : 0 BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
UNE-EN ISO 19598:2017 Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016)
BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
BS ISO 15734:2001 Ships and marine technology. Hydrostatic release units
05/30110749 DC : DRAFT SEP 2005 ISO/IEC 10373-1 - IDENTIFICATION CARDS - PART 1: GENERAL CHARACTERISTICS
14/30302455 DC : 0 BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN ISO 22068 E : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS ISO 9650-3:2009 Small craft. Inflatable liferafts Materials
BS EN ISO 2082:2017 Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
14/30298696 DC : 0 BS ISO 3160-2 - WATCH-CASES AND ACCESSORIES - GOLD ALLOY COVERINGS - PART 2: DETERMINATION OF FINENESS, THICKNESS, CORROSION RESISTANCE AND ADHESION
11/30229160 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
BS EN ISO 9717:2017 Metallic and other inorganic coatings. Phosphate conversion coating of metals
99/716445 DC : DRAFT NOV 99 AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR
12/30254992 DC : 0 BS ISO 12614-2 - ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
15/30328805 DC : 0 BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
DIN EN ISO 12401:2010-01 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
03/317246 DC : 0 ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
09/30195875 DC : 0 BS ISO 10074 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - SPECIFICATION FOR HARD ANODIC OXIDATION COATINGS ON ALUMINIUM AND ITS ALLOYS
15/30324466 DC : 0 BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 12864:2001 LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN ISO 15730:2016-09 Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000)
DIN EN 16451:2015-09 Railway applications - Braking - Brake pad holder
03/321258 DC : 0 ISO/DIS 2082 - METALLIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
11/30242282 DC : 0 BS EN 4695 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K
14/30302452 DC : 0 BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
18/30347942 DC : DRAFT APR 2018 BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD)
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS ISO 13486-1:1999 Road vehicles. Hydraulic braking systems Double-flare pipes, tapped holes, male fittings and tube seats
11/30237817 DC : 0 BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
ISO 11934:1997 X and gamma radiation Indirect- or direct- reading capacitor-type pocket dosemeters
16/30290140 DC : 0 BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
14/30300966 DC : 0 BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
12/30271191 DC : 0 BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
UNI EN 15644 : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
15/30263133 DC : 0 BS ISO 14878 - CYCLES - AUDIO WARNING DEVICES - TECHNICAL SPECIFICATION AND TEST METHODS
05/30135789 DC : DRAFT JUL 2005 EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS ISO 22068 : 2012 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
BS ISO 15741:2016 Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
04/102832 DC : DRAFT JAN 2004 ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS
BS ISO 6856:2005 Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements
11/30242278 DC : 0 BS EN 4693 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring
17/30347933 DC : 0 BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR
EN ISO 2081:2018 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018)
PREN 16129 : DRAFT 2010 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
97/704454 DC : DRAFT MAR 1997 ISO/DIS 11154-3 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 3: SPECIFIC PURPOSE ROOF DEVICES
PREN 1496 : DRAFT 2015 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
14/30287215 DC : 0 BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS
11/30237814 DC : 0 BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
BS EN ISO 12401:2009 Small craft. Deck safety harness and safety line. Safety requirements and test methods
BS EN 13565-1 : 2003 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
15/30280950 DC : 0 BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS
EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
14/30287198 DC : 0 BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE
PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS ISO 27667:2011 Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes
BS EN 15714-3:2009 Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements
BS ISO 12151-6:2009 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
PREN 62444 : DRAFT 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
BS ISO 14960-2:2014 Tubeless tyres. Valves and components Clamp-in tubeless tyre valve-test method
BS ISO 23269-1:2008 Ships and marine technology. Breathing apparatus for ships Emergency escape breathing devices (EEBD) for shipboard use
16/30321230 DC : DRAFT APR 2016 BS EN ISO 9717 - METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS
BIS IS/ISO 13985 : 2006 LIQUID HYDROGEN - LAND VEHICLES FUEL TANKS
ISO 7599:2018 Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS ISO 11243:1994 Cycles. Luggage carriers for bicycles. Concepts, classification and testing
BS ISO 6149-4 : 2006 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
13/30275356 DC : 0 BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
BS EN 16927:2017 Mini-pools. Specific requirements including safety and test methods for mini-pools
06/30115482 DC : DRAFT JULY 2006
BS ISO 3160-2:2015 Watch-cases and accessories. Gold alloy coverings Determination of fineness, thickness, corrosion resistance and adhesion
11/30242281 DC : 0 BS EN 4694 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F
01/702402 DC : DRAFT JAN 2001 ISO/DIS 11154-4 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 4: MAGNETIC FIXING DEVICES
XP PREN 3833 : 1998 XP AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
07/30166915 DC : DRAFT AUG 2007 BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
UNE-EN 16716:2017 Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods
ONORM EN ISO 8434-1 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 16716:2017 Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
PREN 13146-6 : DRAFT 2009 RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS
BS EN ISO 1456:2009 Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
06/30106554 DC : DRAFT APR 2006 ISO 17872 - PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION
PREN ISO 16701 : DRAFT 2011 CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011)
ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
PREN 13523-8 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
17/30323851 DC : 0 BS ISO 19894 - WALKING TROLLEYS - REQUIREMENTS AND TEST METHODS
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
ISO 15171-1:1999 Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure
07/30154920 DC : 0 BS ISO 7165 - FIRE FIGHTING - PORTABLE FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
14/30310323 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
UNI ISO 12151-6 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
06/30156789 DC : 0 BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIP PREVENTION EQUIPMENT
EN 14344:2004 Child use and care articles - Child seats for cycles - Safety requirements and test methods
08/30171576 DC : DRAFT APR 2008 BS ISO 27667 - ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES
07/30171995 DC : 0 BS ISO 15726 - ELECTRODEPOSITED COATINGS AND RELATED FINISHES - ELECTROPLATED ZINC ALLOYS WITH NICKEL, COBALT OR IRON
07/30163202 DC : 0 BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
I.S. EN ISO 12944-6:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018)
BS ISO 21207:2015 Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
BS EN 61537:2007 Cable management. Cable tray systems and cable ladder systems
06/30155635 DC : 0 EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
BS ISO 26945 : 2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY
16/30337293 DC : 0 BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
01/713262 DC : DRAFT SEP 2001 PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER
UNE-EN ISO 10862:2010 Small craft - Quick release system for trapeze harness (ISO 10862:2009)
Z259.2.2-17 Self-retracting devices
CSA ISO/IEC 10373-1 : 2007 : R2012 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
03/115371 DC : DRAFT SEP 2003 EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES
15/30253325 DC : 0 BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION
CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R201200 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
I.S. EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD))
02/106220 DC : 0 BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN ISO 4521:2008 Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
BS ISO 16380 : 2014 ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR
DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
PREN 14783 : DRAFT 2012 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
Z259.15-17 Anchorage connectors
I.S. EN ISO 2081:2018 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018)
PREN 2535 : 200P1 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
PREN 2437 : DRAFT 98 CORR 99 AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS
PREN 2516 : 1996 PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS
ISO 10333-4:2002 Personal fall-arrest systems — Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester
ASTM B 912 : 2002 : R2008 : EDT 1 Standard Specification for Passivation of Stainless Steels Using Electropolishing
ISO 27667:2011 Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes
PREN 4704 : 200P1 AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA)
UNI EN 15496 : 2008 CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS
PREN 4603 : 200P1 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE COATINGS OF FASTENERS - TECHNICAL SPECIFICATION
ISO 6742-5:2015 Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement
BIS IS 15957 : 2012 ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) SPECIFIC EQUIPMENT - GENERAL DESIGN REQUIREMENTS, PERFORMANCE AND TEST METHODS
BS ISO 8434-3:2005 Metallic tube connections for fluid power and general use O-ring face seal connectors
I.S. EN 4704:2012 AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA)
I.S. EN 10223-8:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
PREN 13659 : DRAFT 2014 SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN 15288-1:2008 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
BS ISO 12151-1 : 2010 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
BS ISO 12619-2 : 2014 ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
ISO 21207:2015 Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
ISO 9139:1998 Aerospace — Nuts, plain or slotted (castellated) — Procurement specification
ISO 22778:2006 Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods
EN ISO/IEC 10373 : 1995 IDENTIFICATION CARDS - TEST METHODS
ISO/TR 16335:2013 Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification
I.S. EN 15220-1:2008 RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS
EN 3833:2004 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
UNE-EN ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
I.S. EN 14506:2005 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C
DIN EN 13071-1:2008-10 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
SAE J518/3_201511 Hydraulic Flange Clamps, 2-Screw Flange Connection to be used with SAE J518-1 (Code 61) Connections where Only Low Pressure is Required
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards
UNE-EN ISO 4521:2010 Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008)
BS EN 3833:2004 Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification
NF EN ISO 7599 : 2011 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
UNI ISO 8434-2 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
UNI EN ISO 11130 : 2010 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
PREN 17001 : DRAFT 2016 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION
EN ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
EN 14236:2007 Ultrasonic domestic gas meters
BS EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use 24 degree cone connectors
I.S. EN 62275:2015 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
I.S. EN 14353:2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
NF EN ISO 5912 : 2011 CAMPING TENTS
NF EN 12206-1 : 2011 PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER
DIN EN 1866-1:2007-10 Mobile fire extinguishers - Part 1: Characteristics, performance and test methods
DIN EN 13200-4:2006-12 Spectator facilities - Part 4: Seats - Product characteristics
DIN EN 1359:2007-06 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 12864:2006-03 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 12899-3:2008-02 Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors
DIN EN 12182:2012-07 Assistive products for persons with disability - General requirements and test methods
DIN EN 12487:2007-07 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
DIN EN 1497:2007-10 Personal fall protection equipment - Rescue harnesses
DIN EN 1442:2008-04 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN EN 1498:2007-01 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS
DIN EN 13438:2013-12 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
DIN EN 14427:2014-09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
DIN EN 15266:2007-08 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
DIN EN 14268:2005-11 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
DIN EN 14601:2011-01 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe (includes Amendment A1:2010)
DIN EN 14566:2009-10 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 1496:2018 Personal fall protection equipment - Rescue lifting devices
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 505:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
DIN EN 14267:2004-10 Irrigation techniques - Irrigation hydrants
BS EN 12540:2000 Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
BS EN 14195:2014 Metal framing components for gypsum board systems. Definitions, requirements and test methods
BS EN ISO 17872:2007 Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
BS EN ISO 4527:2003 Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
ISO 8092-2:2005 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
UNE-EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
04/30124785 DC : 0 EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
BS EN 12329:2000 Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel
BS EN 248:2002 Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
UNE-EN ISO 16773-2:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016)
ISO 2080:2008 Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary
ISO 21227-3:2007 Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 3: Evaluation of delamination and corrosion around a scribe
BS EN 12729:2002 Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
BS EN ISO 12402-9 : 2006 PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
BS EN ISO 11997-2:2013 Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light
ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods
UNE-EN 12966-1:2006 Road vertical signs - Variable message traffic signs - Part 1: Product standard
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 813:2008 PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES
DIN EN 12864 E : 2006 AMD 3 2010 LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
I.S. EN 671-2:2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE
UNI EN ISO 12402-9 : 2011 PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
DIN EN 1866:1998-11 MOBILE FIRE EXTINGUISHERS
DIN EN 12329:2000-09 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL
I.S. EN 10223-3:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
EN 15807:2011 Railway applications - Pneumatic half couplings
I.S. EN 13659:2015 SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
I.S. EN ISO 15027-1:2012 IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-1:2012)
DIN EN 12540:2000-07 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM
EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
DIN EN 12206-1:2004-09 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
I.S. EN 341:2011 PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE
I.S. EN 362:2005 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS
I.S. EN 13523-8:2017 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
ONORM EN 13261 : 2012 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
I.S. EN 12182:2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 1096-2:2012 GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS
IEC 60068-2-52:2017 RLV Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
I.S. EN 505:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 2133:2010 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
I.S. EN 14783:2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN ISO 12402-9:2006-12 Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006)
I.S. EN 14601:2005 RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE
I.S. EN ISO 15027-2:2012 IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012)
I.S. EN 3-7:2004 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 12330:2000-09 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL
DIN ISO 8936:2003-06 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11997-2:2013 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
DIN EN 1036-2:2008-05 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
I.S. EN 12487:2007 CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
UNI EN 2133 : 2011 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
I.S. EN 1442:2017 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 13146-6:2012 RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS
I.S. EN ISO 8092-2:2006 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS
I.S. EN ISO 4623-2:2016 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES (ISO 4623-2:2016)
I.S. EN 1359:2017 GAS METERS - DIAPHRAGM GAS METERS
I.S. EN ISO 10308:2006 METALLIC COATINGS - REVIEW OF POROSITY TESTS
I.S. EN 1497:2007 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES
I.S. EN 508-1:2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
I.S. EN 1498:2006 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS
I.S. EN 13438:2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
DIN EN 14344:2004-11 Child use and care articles - Child seats for cycles - Safety requirements and test methods
I.S. EN ISO 16773-2:2016 ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 2: COLLECTION OF DATA (ISO 16773-2:2016)
I.S. EN 14195:2014 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 1036-1:2008-03 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
I.S. EN 13434:2006 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B
I.S. EN ISO 3613:2010 METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS
DIN EN ISO 11439:2013-09 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
DIN EN 13760:2003-11 Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions
I.S. EN 13120:2009 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN 671-1:2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE
I.S. EN 354:2010 PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS
I.S. EN 1670:2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
I.S. EN 14427:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 13802:2013 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
I.S. EN 14566:2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1496:2017 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
DIN EN 13071:2002-05 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FOR 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
I.S. EN 13433:2006 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A
IEC 61914:2015 Cable cleats for electrical installations
UNI EN ISO 12402-7 : 2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 13561:2015 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN 795:2012 PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
I.S. EN ISO 4628-8:2012 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012)
I.S. EN 13858:2006 CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS
I.S. EN 1375:2002 IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
I.S. EN ISO 11439:2013 GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013)
DIN EN 16927:2017-05 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
I.S. EN 12806:2003 AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS
VDI 3823 Blatt 4:2006-11 Vacuum coating quality assurance - Testing of vacuum coated plastics
NF EN 12806 : 2003 AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS
UNE-EN ISO 15730:2016 Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000)
BS EN 15807:2011 Railway applications. Pneumatic half couplings
09/30214454 DC : 0 BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION
ISO/TR 12155:1994 Commercial vehicles Obstacle detection device during reversing Requirements and tests
DIN 67510-4:2008-02 PHOSPHORESCENT PIGMENTS AND PRODUCTS - PART 4: PRODUCTS FOR PHOSPHORESCENT ESCAPE ROUTE SYSTEMS - MARKINGS AND APPLICATIONS
09/30205086 DC : 0 BS EN 13146-6 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS
03/115104 DC : DRAFT OCT 2003 ISO 16151 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, DRY AND WET CONDITIONS
ISO 14960-2:2014 Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method
15/30327073 DC : 0 BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
BS EN 15714-4:2009 Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements
03/319909 DC : DRAFT NOV 2003 BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS
97/541504 DC : DRAFT MAY 97 EN 12841 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM A HEIGHT - WORK POSITIONING SYSTEMS - ROPE ADJUSTMENT DEVICES
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
05/30135337 DC : DRAFT JUN 2005 EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
ISO 4038:1996 Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings
16/30340560 DC : 0 BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
12/30264367 DC : 0 BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
I.S. EN ISO 9142:2004 ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS
15/30291917 DC : 0 BS ISO 14469 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR - PART: 20 MPA (200 BAR) CONNECTOR
10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS EN ISO 19598:2016 Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
BS ISO 9154:2016 Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
BS ISO 11999-3:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Clothing
ISO 15584:2001 Small craft Inboard petrol engines Engine-mounted fuel and electrical components
UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
16/30329239 DC : 0 BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
14/30259899 DC : 0 BS ISO 6742-5 - CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 5: LIGHTING SYSTEMS NOT POWERED BY THE CYCLE&#39;S MOVEMENT
01/562883 DC : DRAFT JUL 2001 BS EN 14225-4 - DIVING SUITS - PART 4: ONE ATMOSPHERE DIVING SUIT - HUMAN FACTORS REQUIREMENTS AND TEST METHODS
AEP-64 : 2012 PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT
BS ISO 6742-5:2015 Cycles. Lighting and retro-reflective devices Lighting systems not powered by the cycle’s movement
18/30347939 DC : DRAFT APR 2018 BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV)
99/100668 DC : DRAFT JAN 1999 PREN 13434 - DISCONNECTOR HYDRAULIC ACTUATED FAMILY G TYPE B - CHARACTERISTICS AND TESTS
14/30304116 DC : 0 BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS
12/30264370 DC : 0 BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
08/30178971 DC : DRAFT FEB 2008 BS ISO 1456 - METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM AND OF COPPER PLUS NICKEL PLUS CHROMIUM
BS EN ISO 11997-1:2017 Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid
05/30128683 DC : DRAFT FEB 2005 ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION
BS ISO 12140:2013 Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
17/30364786 DC : 0 BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 1036:1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
BS EN 1036-1:2007 Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods
UNI ISO 12151-3 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
11/30253944 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
BS ISO 9974-4:2006 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs
BS ISO 9717 : 2010 METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS
BS ISO 2919 : 2012 RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION
06/30125306 DC : 0 EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS EN ISO 26945:2011 Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
14/30293497 DC : 0 BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
BS ISO 6742-4:2015 Cycles. Lighting and retro-reflective devices Lighting systems powered by the cycle’s movement
UNE-EN ISO 17268:2017 Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012)
UNE-EN 61914:2016 Cable cleats for electrical installations
BS ISO 22778:2006 Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods
PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
BS ISO 18869:2017 Hydraulic fluid power. Test methods for couplings actuated with or without tools
16/30329243 DC : 0 BS EN ISO 2082 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
I.S. EN ISO 10862:2009 SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
ISO 3160-2:2015 Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
I.S. EN 15714-4:2009 INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
98/711668 DC : DRAFT AUG 98 PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS
BS ISO 28340:2013 Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
12/30250634 DC : 0 BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
15/30320603 DC : 0 BS EN 60068-2-52 - ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM, CHLORIDE SOLUTION)
07/30161334 DC : 0 BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
04/30124417 DC : DRAFT OCT 2004 EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT
14/30214363 DC : 0 BS EN 15220 - RAILWAY APPLICATIONS - BRAKE INDICATORS
05/30090970 DC : 0 EN 15220-1 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATIC OPERATION BRAKE INDICATORS
BS ISO 23269-2:2011 Ships and marine technology. Breathing apparatus for ships Self-contained breathing apparatus for shipboard firefighters
BS 7796:1995 Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
DIN EN 15096:2008-04 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
15/30322588 DC : 0 BS EN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
07/30163197 DC : 0 BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
BS A 302:1992 Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification
BS ISO 16701 : 2003 CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION
06/30149450 DC : DRAFT APR 2006 EN 1866-1 - MOBILE FIRE EXTINGUISHERS - PART 1: CHARACTERISTICS, PERFORMANCE AND TEST METHODS
12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
I.S. EN 71-14:2014 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
06/30133250 DC : 0 BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
07/30167371 DC : 0 BS ISO 2080 - METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY
09/30196113 DC : DRAFT JULY 2009 BS ISO 9717 - METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS
UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN 15220-1:2011-07 RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS
UNI ISO 8434-6 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
06/30154256 DC : DRAFT AUG 2006 ISO 9650-3 - SMALL CRAFT - INFLATABLE LIFERAFTS - PART 3: MATERIALS
BS EN 15646:2009 Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
00/563156 DC : DRAFT JULY 2000 PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F
ISO 12944-9:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
ASTM B 912 : 2002 : R2013 Standard Specification for Passivation of Stainless Steels Using Electropolishing
PREN 12966 : DRAFT 2013 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
UNI EN 15220-1 : 2011 RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS
UNI EN 15646 : 2009 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
03/317245 DC : DRAFT OCT 2003 ISO 22778 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF CADMIUM ON IRON AND STEEL - SPECIFICATION AND TEST METHODS
I.S. EN 12966:2014 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
IEEE 1591.1-2012 IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
BS ISO 12151-3:2010 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
Z259.2.5-17 Fall arresters and vertical lifelines
BS ISO 2080 : 2008 METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY
UNI EN ISO 10683 : 2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
UNE-EN 15220:2017 Railway applications - Brake indicators
NF ISO 9650-3 : 2009 SMALL CRAFT - INFLATABLE LIFERAFTS - PART 3: MATERIALS
ISO 6149-4:2017 Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 4091:2003 Road vehicles Connectors for the electrical connection of towing and towed vehicles Definitions, tests and requirements
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
UNI EN 15714-3 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
ISO 2081:2018 Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
UNE-EN ISO 7599:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010)
UNE-EN 71-14:2015 Safety of toys - Part 14: Trampolines for domestic use
I.S. EN ISO 4521:2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
I.S. EN 4827:2017 AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
ISO 10074:2017 Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys
CEI EN 62275 : 2016 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
I.S. EN 3833:2005 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
NFL 10-201 : 1998 AEROSPACE SERIES - LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MM ON METALLIC SUBSTRATE - QUALITY OF COATED PARTS
I.S. EN 16582-1:2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
ISO 9974-4:2016 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
NF EN 61914 : 2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
I.S. EN 4826:2014 AEROSPACE SERIES - ZINC-NICKEL (12%-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS
ISO 13486-1:1999 Road vehicles Hydraulic braking systems Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
I.S. EN 14428:2015 SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
UNE-EN ISO 2919:2015 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)
I.S. EN 61537:2007 CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
ISO 14469:2017 Road vehicles Compressed natural gas (CNG) refuelling connector
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
ISO 6856:2005 Road vehicles Unscreened high-voltage ignition cable assemblies Test methods and general requirements
BS EN 358:2000 Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
EN ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
UNI EN 15288-1 : 2010 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
ISO 17966:2016 Assistive products for personal hygiene that support users Requirements and test methods
EN ISO 16151:2008 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, 'dry' and 'wet' conditions (ISO 16151:2005)
ISO 1458:2002 Metallic coatings Electrodeposited coatings of nickel
I.S. EN IEC 60068-2-52:2018 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
I.S. EN 15220:2016 RAILWAY APPLICATIONS - BRAKE INDICATORS
ISO/IEC 18745-1:2014 Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability)
PREN 505 : DRAFT 2012 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
PREN 16602-70-14 : DRAFT 2016 SPACE PRODUCT ASSURANCE - CORROSION
EN 2583:1997 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
DIN EN ISO 4042:2001-01 FASTENERS - ELECTROPLATED COATINGS
PREN 17125 : DRAFT 2017 DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
I.S. EN ISO 12944-9:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
SAE J518/2_201704 Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62)
ISO 15170-2:2001 Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements
UNE-EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
I.S. EN ISO 16701:2015 CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015)
UNE-EN 15220-1:2009 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators
FM 4411 : 2016 CAVITY WALLS AND RAINSCREENS
UNE-EN 14428:2016 Shower enclosures - Functional requirements and test methods
UNI EN ISO 2919 : 2015 RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION
PREN 1359 : DRAFT 2014 GAS METERS - DIAPHRAGM GAS METERS
CSA Z259.2.4 : 2015 FALL ARRESTERS AND VERTICAL RIGID RAILS
EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
ISO 11999-3:2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: Clothing
ISO 17745:2016 Steel wire ring net panels Definitions and specifications
DIN EN 13565-1:2016-08 (Draft) FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO 15741:2016 Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
UNE-EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
ISO 12151-6:2009 Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
ISO 12991:2012 Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles
ISO 12151-4:2007 Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends
BS EN 62275:2015 Cable management systems. Cable ties for electrical installations
ISO 9650-3:2009 Small craft — Inflatable liferafts — Part 3: Materials
DIN EN ISO 10683:2016-07 (Draft) FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
DIN EN 13146-6:2012-06 RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS
EN 71-14 : 2014 COR 2017 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems Specification
UNI EN ISO 7599 : 2010 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
ISO 8434-6:2009 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
EN ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)
EN 62275:2015 Cable management systems - Cable ties for electrical installations
I.S. EN 15096:2008 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION
I.S. EN 2583:1997 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
DIN EN 14451:2005-08 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
IEC 60309-5:2017 Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
I.S. EN 15644:2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
I.S. EN ISO 15584:2017 SMALL CRAFT - INBOARD PETROL ENGINES - ENGINE-MOUNTED FUEL AND ELECTRICAL COMPONENTS (ISO 15584:2001)
DIN EN 1929-2:2005-03 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors; German version EN 1929-2:2004
DIN EN 13120:2014-09 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN 1496:2015-07 (Draft) PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
DIN EN 12841:2006-11 Personal fall protection equipment - Rope access systems - Rope adjustment devices
DIN EN 2583:1997-03 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
DIN EN ISO 4628-8:2013-03 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012)
DIN EN 2516:1997-05 AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS
DIN EN ISO 11997-2:2013-12 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
DIN EN 2289:1996-10 AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION
DIN EN 1096-2:2012-04 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
DIN EN 795:2012-10 PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
DIN EN 508-1:2014-08 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
DIN EN 813:2008-11 Personal fall protection equipment - Sit harnesses; German version EN 813:2008
DIN EN 362:2008-09 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS
DIN EN ISO 21227-3:2007-07 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)
DIN EN 331:2016-04 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
DIN EN 13786:2010-07 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 13785:2010-05 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
DIN EN 354:2010-11 Personal fall protection equipment - Lanyards
UNE-EN ISO 15027-1:2013 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
DIN EN 15132:2006-12 Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
BS EN 4826:2014 Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
BS EN 14451:2005 Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A
BS EN 2437:2002 Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys
UNE-EN ISO 4628-8:2013 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
BS EN 12676-2:2000 Anti-glare systems for roads Test methods
BS EN ISO 14923:2003 Thermal spraying. Characterization and testing of thermally sprayed coatings
ISO 16701:2015 Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
ISO 26945:2011 Metallic and other inorganic coatings Electrodeposited coatings of tin-cobalt alloy
BS EN 795:2012 Personal fall protection equipment. Anchor devices
ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
BS EN ISO 5912:2011 Camping tents
BS EN 1866:2005 Mobile fire extinguishers
BS EN 14817:2006 Railway applications. Suspension components. Air-spring control elements
ISO 5912:2011 Camping tents
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
UNE-EN 671-1:2013 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
UNE-EN 10223-3:2014 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
I.S. EN ISO 12402-7:2006 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN 15096:2008 Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
EN 14451:2005 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A
ONORM EN ISO 5912 : 2013 CAMPING TENTS (ISO 5912:2011)
UNE-EN 62275:2016 Cable management systems - Cable ties for electrical installations
UNI EN 13261 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
I.S. EN 14451:2005 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
I.S. EN ISO 12402-9:2006 PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
ONORM EN 14451 : 2005 DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A
UNE-EN 16207:2015 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 15288-1:2008+A1:2010 Swimming pools - Part 1: Safety requirements for design
EN 1496:2017 Personal fall protection equipment - Rescue lifting devices
EN 1866-1:2007 Mobile fire extinguishers - Part 1: Characteristics, performance and test methods
EN ISO 4521:2008 Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008)
EN 813:2008 Personal fall protection equipment - Sit harnesses
EN 362:2004 Personal protective equipment against falls from a height - Connectors
EN 396:1993/A1:1998 LIFEJACKETS AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 150 N
EN 248:2002 Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
EN ISO 4623-2:2016 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)
EN ISO 4527:2003 Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003)
UNI EN 12487 : 2007 CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
UNI EN ISO 15027-1 : 2012 IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNI EN 10223-8 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNI EN 14783 : 2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN ISO 1456 : 2009 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM
UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
UNI EN 505 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNI EN 4473 : 2010 AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION
UNI EN 671-1 : 2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE
UNI EN 813 : 2008 PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES
ONORM EN 2535 : 2011 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
UNI EN 12899-3 : 2008 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS
UNI EN 14268 : 2006 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
UNI EN ISO 11997-2 : 2014 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
UNI EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNI EN ISO 4628-8 : 2013 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT
UNI EN 13802 : 2014 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
UNI EN 10223-7 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN 13120 : 2014 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN ISO 15027-2 : 2012 IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
UNI EN 14800 : 2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS
EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
UNI EN 341 : 2011 PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE
UNI EN 15069 : 2009 SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
UNI EN 14566 : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1497 : 2008 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES
UNI EN 13146-6 : 2012 RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS
UNI EN 13438 : 2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
UNI EN 354 : 2010 PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS
UNI EN 671-2 : 2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE
UNI EN 1096-2 : 2012 GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS
EN ISO 4628-8:2012 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
UNI EN 14140 : 2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
UNI EN 12864 : 2010 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 12182 : 2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
UNI EN 1670 : 2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
UNI EN 13786 : 2009 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 10223-3 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
UNI EN 13785 : 2009 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
ONORM EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
SAE J531_201511 Automotive Pipe, Filler, and Drain Plugs
I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
13/30288815 DC : 0 BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
BS EN ISO 10862:2009 Small craft. Quick release system for trapeze harness
ISO 12140:2013 Agricultural machinery Agricultural trailers and trailed equipment Drawbar jacks
UNI EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
BS ISO 14878:2015 Cycles. Audible warning devices. Technical specification and test methods
ISO 15726:2009 Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron
PD ISO/TR 16335:2013 Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification
DIN EN ISO-IEC 10373 : 1995 IDENTIFICATION CARDS; TEST METHODS
17/30286850 DC : DRAFT SEP 2017 BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION
BS ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems. Specification
ISO 17746:2016 Steel wire rope net panels and rolls Definitions and specifications
93/710335 DC : DRAFT 93 ISO 8092 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS
PREN 13802 : DRAFT 2012 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
BS ISO 16539:2013 Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. \'Dry\' and \'wet\' conditions at constant absolute humidity
DIN EN ISO 13129:2013-04 PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMETRY (RV) TECHNIQUE AND DC TRANSIENT (DCT) MEASUREMENTS (ISO 13129:2012)
I.S. EN ISO 2082:2017 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2082:2017)
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
BS ISO 15730 : 2000 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL
06/30135398 DC : 0 EN 15496 - CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS
07/30166912 DC : DRAFT AUG 2007 BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
I.S. EN 13071:2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
11/30244798 DC : 0 BS EN 1096-2 - GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS
02/102266 DC : DRAFT MAR 2002 PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
17/30333721 DC : 0 BS EN ISO 7599 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
DIN EN ISO 8936:2015-09 (Draft) AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
PREN 13438 : DRAFT 2012 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
DIN EN 14353:2016-02 (Draft) METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
I.S. EN 12476:2000 PHOSPHATE CONVERSION COATINGS OF METALS - METHOD OF SPECIFYING REQUIREMENTS
ISO/PAS 11154:2006 Road vehicles — Roof load carriers
BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
I.S. EN ISO 8434-4:2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
UNI EN ISO 12401 : 2009 SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS
ONORM EN ISO 16151 : 2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
11/30241851 DC : 0 BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
BS ISO 7583:2013 Anodizing of aluminium and its alloys. Terms and definitions
BS EN ISO 13129:2012 Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
UNI EN ISO 26945 : 2011 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY
10/30196548 DC : 0 BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
17/30347930 DC : 0 BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE
13/30284277 DC : 0 BS ISO 14960-2 - TUBELESS TYRES - VALVES AND COMPONENTS - PART 2: CLAMP-IN TUBELESS TIRE VALVE-TEST METHOD
BS EN 61914:2016 Cable cleats for electrical installations
14/30259896 DC : 0 BS ISO 6742-4 - CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 4: LIGHTING SYSTEMS POWERED BY THE CYCLE&#39;S MOVEMENT
BS ISO 15171-1:1999 Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling not for connection under pressure
BS ISO 14469-3:2006 Road vehicles. Compressed natural gas (CNG) refuelling connector 25 MPa (250 bar) connector
13/30236754 DC : 0 BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR
17/30320673 DC : 0 BS EN ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES
14/30288142 DC : 0 BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 16151:2008 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS
12/30257615 DC : 0 BS ISO 7583 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - TERMS AND DEFINITIONS
BS EN ISO 14713-1:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance
13/30279620 DC : 0 BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
13/30281710 DC : 0 BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
03/103085 DC : DRAFT FEB 2003 EN 1498 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS
08/30189619 DC : 0 BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
DIN EN ISO 14713-1:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
17/30361500 DC : 0 BS EN ISO 4623-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
11/30231401 DC : 0 BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION
08/30156909 DC : DRAFT APR 2008 BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
UNE-EN ISO 2082:2017 Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)
ISO 6742-2:2015 Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices
12/30256073 DC BS EN 12899-3 AMD1. Fixed, vertical road traffic signs. Part 3. Delineator posts and retroreflectors
10/30196135 DC : 0 BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
BS EN 16582-1:2015 Domestic swimming pools General requirements including safety and test methods
UNI EN ISO 22068 : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
I.S. EN ISO 13129:2012 PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMMETRY (RV) TECHNIQUE AND DC TRANSIENT (DCT) MEASUREMENTS (ISO 13129:2012)
EN IEC 60068-2-52:2018 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
BS EN 16207:2014 Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
14/30257546 DC : 0 BS ISO 17966 - ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
UNI ISO 2919 : 2012 RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION
PREN 13565-1 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
00/715332 DC : DRAFT OCT 2000 ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
UNI EN ISO 10862 : 2009 SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
ONORM EN 2133 : 2011 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
BS 3900-H8(2005) : 2005 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE
BS ISO 10074:2017 Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
UNE-EN 15714-4:2010 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
07/30145313 DC : 0 BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
16/30339916 DC : 0 BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
02/563070 DC : DRAFT JULY 2002 BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS, REQUIREMENTS AND TEST METHODS
CEI UNI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
03/317247 DC : DRAFT OCT 2003 ISO 22779 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF ALUMINIUM - SPECIFICATION AND TEST METHODS
15/30300661 DC : 0 BS EN ISO 19598 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)- FREE TREATMENT
BS ISO 15500-2:2012 Road vehicles. Compressed natural gas (CNG) fuel system components Performance and general test methods
EN ISO 3613:2010 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010)
PREN 14566 : DRAFT 2014 MECHANICAL FASTENERS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TESTS METHODS
17/30366369 DC : 0 BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
BS EN ISO 2080:2009 Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
06/30079861 DC : DRAFT JULY 2006 ISO 15484 - ROAD VEHICLES - BRAKE LININGS FRICTION MATERIALS - PRODUCT DEFINITION AND QUALITY ASSURANCE
07/30172345 DC : 0 BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS
BS PAS 59(2004) : 2004 FILLED COLLECTIVE FALL ARREST SYSTEMS
12/30259634 DC : 0 BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE
02/103308 DC : DRAFT MAY 2002 BS EN 14454 - DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 INCLUSIVE - FAMILY H, TYPE A
BS 7825-3.5:1997 Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties
04/19987165 DC : DRAFT SEP 2004 BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
04/301209 DC : DRAFT JAN 2004 EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS
DD ENV 1375-1:1994 Identification card systems. Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
BS ISO 15726:2009 Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
01/562882 DC : DRAFT JUL 2001 BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS
BS ISO 16151 : 2005 CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS
BS ISO 17398:2004 Safety colours and safety signs. Classification, performance and durability of safety signs
SAE J3082_201511 Auxiliary Two Conductor Electrical Power Connector for Truck-Trailer High Power Jumper Cable
BS ISO 8434-4 : 1995 AMD 11038 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
DIN EN 16207:2014-11 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
BS ISO 13592:1998 Small craft. Backfire flame control for petrol engines
SAE J518/1_201301 Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61)
BS A 342:1999 Nuts, plain or slotted (castellated). Procurement specification
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
SAE J2600_201510 Compressed Hydrogen Surface Vehicle Fueling Connection Devices
CSA Z259.12 : 2011 CONNECTING COMPONENTS FOR PERSONAL FALL-ARREST SYSTEMS (PFAS)
I.S. EN 61914:2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
04/301205 DC : DRAFT JAN 2004 BS ISO 9650-3 - SMALL CRAFT - LIFERAFT - PART 3: MATERIAL
DIN EN 10223-8:2014-04 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
DIN EN ISO 10862:2009-10 SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
DIN EN 15714-4:2010-02 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
SAE J2551/1_201302 Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
SAE J2551/3_201302 Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
UNI CEI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
DIN EN ISO 7599:2010-12 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
PREN ISO 15027-1 : DRAFT 2010 IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
I.S. EN 1036-1:2007 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 1: DEFINITIONS, REQUIREMENTS AND TEST METHODS
ISO 11154-4:2004 Road vehicles Roof load carriers Part 4: Magnetic fixing devices
I.S. EN ISO 2919:2014 RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION (ISO 2919:2012)
I.S. EN ISO 11997-1:2017 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
UNE-EN ISO 12401:2010 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
I.S. EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS
PREN 331 : DRAFT 2013 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
ISO 12151-2:2003 Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
UNI ISO 8434-3 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
ISO 10546:1993 Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
17/30360253 DC : 0 BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
ISO 7076-2:2012 Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
ISO 15500-2:2016 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods
ISO 13985:2006 Liquid hydrogen — Land vehicle fuel tanks
PREN 353-1 : DRAFT 2012 PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS EN 353-1 : 2014 PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS ISO/IEC 18745-1:2014 Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability)
ISO 11999-1:2015 PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General
ONORM EN ISO 7599 : 2010 ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM
16/30337101 DC : 0 BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES
ISO 12151-5:2007 Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
I.S. EN ISO 9717:2017 METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS (ISO 9717:2017)
EN ISO 11997-1:2017 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
I.S. EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
15/30327732 DC : 0 BS EN 16856 - PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES
17/30354229 DC : 0 BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 12966:2015-03 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
UNE-EN ISO 26945:2011 Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
UNI EN 13071-1 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
PREN 17109 : DRAFT 2017 ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS
ISO/IEC 10373-1:2006 Identification cards Test methods Part 1: General characteristics
ISO 12151-1:2010 Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
EN 4710-01:2015 Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
EN 353-1:2014+A1:2017 Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
EN ISO 11130:2018 Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017)
ISO 14469-2:2007 Road vehicles Compressed natural gas (CNG) refuelling connector Part 2: 20 MPa (200 bar) connector, size 2
ISO 11408:1999 Chemical conversion coatings Black oxide coating on iron and steel Specification and test methods
ISO 7165:2017 Fire fighting — Portable fire extinguishers — Performance and construction
ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
I.S. EN 14225-2:2017 DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
ISO 14655:1999 Epoxy-coated strand for the prestressing of concrete
ISO 22159:2007 Personal equipment for protection against falls — Descending devices
ISO 4525:2003 Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials
I.S. EN ISO 10373:1995 IDENTIFICATION CARDS - TEST METHODS
I.S. EN ISO 11130:2018 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION (ISO 11130:2017)
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
I.S. EN ISO 26945:2011 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
ONORM EN 16207 : 2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
DIN EN ISO 8044:2015-12 CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015)
DIN EN ISO 15027-2:2013-03 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
DIN EN 341:2011-09 Personal fall protection equipment - Descender devices for rescue
DIN EN 13802:2014-03 Railway applications - Suspension components - Hydraulic dampers
DIN EN ISO 15027-1:2013-03 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
DIN EN 10223-3:2014-04 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
DIN EN 10223-7:2013-02 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
04/30124829 DC : 0 EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
BS EN 1496:2017 Personal fall protection equipment. Rescue lifting devices
UNE-EN 14140:2015 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
BS EN 4473:2010 Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification
UNE-EN 13659:2016 Shutters and external venetian blinds - Performance requirements including safety
BS EN 12487:2007 Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
BS EN 3-5:1996 Portable fire extinguishers Specification and supplementary tests
BS EN 508-1:2014 Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel
UNE-EN 10223-8:2014 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
BS EN 14268:2005 Irrigation techniques. Meters for irrigation water
BS EN 13858:2006 Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
ISO 12402-9:2006 Personal flotation devices Part 9: Test methods
BS EN 1375:2002 Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics
BS EN 15496:2008 Cycles. Requirements and test methods for cycle locks
EN ISO 5912:2011 Camping tents (ISO 5912:2011)
BS EN 1036:1999 Glass in building. Mirrors from silver-coated float glass for internal use
ISO 4521:2008 Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods
ISO 14713-1:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
BS EN 12476:2000 Phosphate conversion coatings of metals. Method of specifying requirements
BS EN ISO 12683:2004 Mechanically deposited coatings of zinc. Specification and test methods
BS EN 395:1995 Lifejackets and personal buoyancy aids. Lifejacket 100
BS EN 14601 : 2005 RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE
BS EN 14140:2014 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction
BS EN 14236:2007 Ultrasonic domestic gas meters
BS EN 12676-1:2000 Anti-glare systems for roads Performance and characteristics
BS EN 13959:2004 Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D
UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
BS EN 10223-7:2012 Steel wire and wire products for fencing and netting Steel wire welded panels for fencing
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
BS EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
BS EN 671-2:2001 Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose
BS EN 12841:2006 Personal fall protection equipment. Rope access systems. Rope adjustment devices
BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNE-EN 10223-7:2013 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
ISO 4623-2:2016 Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates
BS EN 2536:1995 Hard anodizing of aluminium alloys
BS EN 14427:2014 LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction
11/30242646 DC : DRAFT FEB 2011 BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
UNE-EN 13802:2014 Railway applications - Suspension components - Hydraulic dampers
BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
UL 514D:2ED 2013-06-28 Cover Plates for Flush-Mounted Wiring Devices
ISO 10862:2009 Small craft Quick release system for trapeze harness
UNE-EN 14195:2015 Metal framing components for gypsum board systems - Definitions, requirements and test methods
UNE-EN ISO 5912:2012 Camping tents (ISO 5912:2011)
ISO 4611:2010 Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests
BS EN ISO 4628-8:2012 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of delamination and corrosion around a scribe or other artificial defect
BS EN ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Collection of data
ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Part 2: Collection of data
ISO 15730:2000 Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel
ISO 14923:2003 Thermal spraying Characterization and testing of thermally sprayed coatings
ISO 15027-2:2012 Immersion suits Part 2: Abandonment suits, requirements including safety
UNE-EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
UNE-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013)
ISO 12683:2004 Mechanically deposited coatings of zinc Specification and test methods
BS EN 12864 : 2001 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 362:2004 Personal protective equipment against falls from a height. Connectors
DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
I.S. EN ISO 8044:2015 CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015)
BS EN 1929-2:2004 Basket trolleys Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors
ISO 3613:2010 Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods
BS EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements
ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods
ISO 13129:2012 Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
DIN EN 15069:2010-07 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
DIN EN 14783:2013-07 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
IEC 61537:2006 Cable management - Cable tray systems and cable ladder systems
ISO 2082:2017 Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
UNE-EN ISO 1456:2010 Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
UNE-EN 14601:2006 Railway applications. Straight and agled end cocks for brake pipe and main reservoir pipe
BS EN 13561:2015 External blinds and awnings. Performance requirements including safety
IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
UNE-EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 8044:2015 Corrosion of metals and alloys. Basic terms and definitions
BS EN 1866-1:2007 Mobile fire extinguishers Characteristics, performance and test methods
BS EN 671-1:2012 Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose
ISO 15027-1:2012 Immersion suits Part 1: Constant wear suits, requirements including safety
BS EN 13438:2013 Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
IEC 62275:2013 Cable management systems - Cable ties for electrical installations
BS EN 1670:2007 Building hardware. Corrosion resistance. Requirements and test methods
EN ISO 8044:2015 Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)
ISO 2919:2012 Radiological protection — Sealed radioactive sources — General requirements and classification
BS EN ISO 15027-1:2012 Immersion suits Constant wear suits, requirements including safety
BS EN 1442 : 2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNI EN ISO 5912 : 2011 CAMPING TENTS
ISO 22068:2012 Sintered-metal injection-moulded materials — Specifications
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
BS EN 14344:2004 Child use and care articles. Child seats for cycles. Safety requirements and test methods
BS EN 2133:2010 Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
BS EN 13434:2006 Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B
BS EN 14452:2005 Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B
BS EN ISO 8092-2:2005 Road vehicles. Connections for on-board electrical wiring harnesses Definitions, test methods and general performance requirements
BS EN 364:1993 Personal protective equipment against falls from a height. Test methods
BS EN 1929-1:1998 Basket trolleys Requirements and tests for basket trolleys with or without a child carrying facility
UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
08/30192115 DC : 0 BS EN 4473 ED.P2 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION
BS EN ISO 11439:2013 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN 1096-2:2012 Glass in building. Coated glass Requirements and test methods for class A, B and S coatings
BS EN 399:1994 Lifejackets and personal buoyancy aids. Lifejacket 275
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
BS EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
BS EN 12182:2012 Assistive products for persons with disability. General requirements and test methods
BS EN 12330:2000 Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel
UNE-EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
BS EN 13298:2003 Railway applications. Suspension components. Helical suspension springs, steel
DIN EN 14455:2005-08 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
EN 14817:2006 Railway applications - Suspension components - Air spring control elements
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
EN 4827:2017 Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
EN 15220:2016 Railway applications - Brake indicators
EN 1497:2007 Personal fall protection equipment - Rescue harnesses
EN 16207:2014 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 14455:2005 Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
EN 2437:2001 Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN ISO 15730:2016 Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000)
EN 15081:2007 Industrial valves - Mounting kits for part-turn valve actuator attachment
EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods
EN ISO 2919:2014 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)
EN 13858:2006 Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
EN 2536:1995 Aerospace series - Hard anodizing of aluminium alloys
EN 13785:2005+A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 1929-2:2004 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999)
EN ISO 19598:2016 Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016)
EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
EN 16451:2015 Railway applications - Braking - Brake pad holder
EN 1375:2002 Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics
EN 16716:2017 Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
EN ISO 26945:2011 Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
EN 15220-1:2008+A1:2011 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators
EN ISO 15027-1:2012 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
EN 15714-3:2009 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
EN 13659:2015 Shutters and external venetian blinds - Performance requirements including safety
EN ISO 10308:2006 Metallic coatings - Review of porosity tests (ISO 10308:2006)
EN 1498:2006 Personal fall protection equipment - Rescue loops
EN 3027:1994 Aerospace series - Test method for dry film lubricants - Salt spray test
EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
EN 15496:2008 Cycles - Requirements and test methods for cycle locks
EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN 1359:2017 Gas meters - Diaphragm gas meters
EN ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
EN 3-5:1996/AC:1997 PORTABLE FIRE EXTINGUISHERS - SPECIFICATION AND SUPPLEMENTARY TESTS
EN ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005)
EN 4704:2012 Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
EN 395:1993/A1:1998 LIFEJACKET AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 100 N
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 2289:1996 Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification
EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements
EN ISO 21227-3:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)
EN ISO 15584:2017 Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)
EN ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016)
EN ISO 12683:2004 Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)
EN 15646:2009 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
EN ISO 15027-2:2012 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
EN 14454:2005 Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A
EN ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007)
EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
EN 14452:2005 Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B
EN 3769:1997 Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys
EN 15714-4:2009 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 1929-1:1998 Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without a child carrying facility
EN 1866:2005 Mobile fire extinguishers
EN 13959:2004 Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 3-7:2004+A1:2007 Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods
EN 4473:2010 Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN ISO 13129:2012 Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 399:1993/A1:1998 LIFEJACKETS AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 275 N
EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
EN 354:2010 Personal fall protection equipment - Lanyards
EN ISO 10862:2009 Small craft - Quick release system for trapeze harness (ISO 10862:2009)
EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10)
EN 13802:2013 Railway applications - Suspension components - Hydraulic dampers
EN ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017)
EN 4826:2014 Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
EN 795:2012 Personal fall protection equipment - Anchor devices
EN 341:2011 Personal fall protection equipment - Descender devices for rescue
EN 14453:2005 Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 3021:2017 Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
EN 393:1993/A1:1998 LIFEJACKETS AND PERSONAL BUOYANCY AIDS - BUOYANCY AIDS 50
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
10/30197398 DC : 0 BS ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES
ONORM EN ISO 12402-7 : 2015 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011)
09/30214463 DC : 0 BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION
15/30329088 DC : 0 BS EN 358 - PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT
UNI EN 16207 : 2014 RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK
BS ISO 12151-4:2007 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends
BS ISO 17966:2016 Assistive products for personal hygiene that support users. Requirements and test methods
DIN EN ISO 17268:2016-02 (Draft) GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012)
DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
ASTM B 912 : 2002 Standard Specification for Passivation of Stainless Steels Using Electropolishing
I.S. EN 1866:2006 MOBILE FIRE EXTINGUISHERS
I.S. EN 12540:2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM
12/30238456 DC : 0 BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
SAE J516_201604 Hydraulic Hose Fittings
DIN EN 15714-3:2010-02 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
I.S. EN 1866-1:2007 MOBILE FIRE EXTINGUISHERS - PART 1: CHARACTERISTICS, PERFORMANCE AND TEST METHODS
I.S. EN ISO 10289:2001 METHODS FOR CORROSION TESTING OF METALLIC AND OTHER INORGANIC COATINGS ON METALLIC SUBSTRATES - RATING OF TEST SPECIMENS AND MANUFACTURED ARTICLES SUBJECTED TO CORROSION TESTS
07/30165984 DC : 0 BS ISO 26945 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF TIN-COBALT ALLOY
DD ISO/PAS 11154:2006 Road vehicles. Roof load carriers
UNE-EN 15714-3:2010 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
09/30196340 DC : 0 BS ISO 23269-2 - SHIPS AND MARINE TECHNOLOGY - BREATHING APPARATUS FOR SHIPS - PART 2: BREATHING APPARATUS FOR SHIPBOARD FIREFIGHTERS
DIN EN 13523-8:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
17/30350881 DC : DRAFT SEP 2017 BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS
13/30271601 DC : 0 BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 15584:2017 Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components
ISO 19203:2018 Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications
99/100667 DC : DRAFT JAN 1999 PREN 13433 - DISCONNECTOR DIRECT ACTUATED FAMILY G TYPE A - CHARACTERISTICS AND TESTS
ISO 15734:2001 Ships and marine technology — Hydrostatic release units
DIN EN 15644:2009-03 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
01/712604 DC : DRAFT SEP 2001 ISO 21207 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - ACCELERATED CORROSION TESTS INVOLVING ALTERNATE EXPOSURE FOR CORROSION PROMOTING GASES, NEUTRAL SALTS-PRAY AND DRYING
BS ISO 11408:1999 Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
14/30296410 DC : 0 BS PREN ISO 16773-2 - ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED SPECIMENS - PART 2: COLLECTION OF DATA
DIN EN ISO 1456:2009-12 Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
17/30358108 DC : 0 BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
00/716396 DC : DRAFT NOV 2000 PREN ISO 16147 - SMALL CRAFT - INBOARD DIESEL ENGINES - ENGINE-MOUNTED FUEL AND ELECTRICAL COMPONENTS
BS ISO 15171-2:2016 Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure
03/100997 DC : DRAFT MAR 2003 BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT
09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
02/561343 DC : DRAFT MAR 2002 BS EN 362 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS
16/30333709 DC : 0 BS ISO 10074 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - SPECIFICATION FOR HARD ANODIC OXIDATION COATINGS ON ALUMINIUM AND ITS ALLOYS
17/30327510 DC : 0 BS ISO 20766-2 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
08/30188146 DC : 0 BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
NF EN 2583 : 1997 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
ONORM EN 4689 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
BS ISO 17745:2016 Steel wire ring net panels. Definitions and specifications
11/30229997 DC : 0 BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
05/30139335 DC : DRAFT SEP 2005 EN 12487 - CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
PD ISO/TS 18684:2015 Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods
BS EN 15220:2016 Railway applications. Brake indicators
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
15/30323348 DC : 0 BS EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
BS ISO 11999-1:2015 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures General
SAE J2337/2_201702 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods
ISO 16151:2005 Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
17/30346602 DC : 0 BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
10/30211082 DC : 0 BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
BS ISO 9635-1:2014 Agricultural irrigation equipment. Irrigation valves General requirements
BS EN 4710-01:2015 Aerospace series. Quick release fastening systems for non-structural applications Technical specification
EN ISO 14469:2017 Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017)
DIN EN ISO 16701:2015-10 CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015)
SAE J2551/2_201302 Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
BS EN ISO 16701:2015 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
UNE-EN ISO 2080:2010 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008)
I.S. EN 15496:2008 CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS
UNE-EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
I.S. EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
02/565097 DC : DRAFT DEC 2002 BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
NF ISO 12151-6 : 2009 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS
BS EN 15096:2008 Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification
BS ISO 11515 : 2013 GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
NF ISO 12151-1 : 2010 AMD 1 2017 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
BS ISO/IEC 10373-1 : 2006 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
NF EN ISO 12401 : 2009 SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS
ISO 7583:2013 Anodizing of aluminium and its alloys — Terms and definitions
98/711362 DC : DRAFT 98 ISO/DIS 5092-2 - ROAD VEHICLES - CONNECTIONS FOR ON ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS
PREN ISO 15027-2 : DRAFT 2010 IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
BS EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
UNE-EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
17/30360728 DC : DRAFT MAY 2017 BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
BS A 363:2000 Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
PREN 1096-2 : DRAFT 2011 GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS
05/30127096 DC : DRAFT FEB 2005 ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, \'dry\' and \'wet\' conditions
02/106433 DC : DRAFT OCT 2002 BS EN 12899-3 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS
01/123542 DC : DRAFT SEP 2001 ISO 10308 - METALLIC COATINGS - REVIEW OF POROSITY TESTS
BS ISO 13985:2006 Liquid hydrogen. Land vehicle fuel tanks
08/30156922 DC : 0 BS EN 15220-2 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 2: ELECTRICALOPERATION BRAKE INDICATORS
BS ISO 1456:2003 Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
AEP-61 : 2009 PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS
UNI EN ISO 3613 : 2011 METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC- ALUMINIUM ALLOYS - TEST METHODS
BS ISO 22779:2006 Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods
ISO 9154:2016 Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification
NF ISO 8434-6 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
PREN 71-14 : DRAFT 2017 SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE
DIN EN 15714-2:2010-02 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
UNI ISO 12151-4 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
DIN ISO 8936:2008-06 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 26945:2011-06 Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
SAE J2337/3_201701 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods
ISO 14878:2015 Cycles Audible warning devices Technical specification and test methods
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
PREN 3769 : 1996 AEROSPACE SERIES - ELECTROLYTIC POLISHING OF CORROSION RESISTANT STEELS AND HEAT RESISTING ALLOYS
DIN EN 16582-1:2015-11 Domestic swimming pools - Part 1: General requirements including safety and test methods
ONORM EN 16582-1 : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
I.S. EN 16451:2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
BS EN 15220-1 : 2008 RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS
I.S. EN 16716:2017 MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 19598:2016 ETALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016)
UNE-EN ISO 11130:2011 Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010)
ISO 4148:2004 Road vehicles Special warning lamps Dimensions
I.S. EN ISO 22068:2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
ISO 10333-2:2000 Personal fall-arrest systems — Part 2: Lanyards and energy absorbers
UNE-EN 12899-3:2010 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
BS ISO 4525:2003 Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
ISO 10333-3:2000 Personal fall-arrest systems — Part 3: Self-retracting lifelines
I.S. EN ISO 15730:2016 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL (ISO 15730:2000)
I.S. EN 16129:2013 PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
I.S. EN ISO 8936:2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
I.S. EN 15714-3:2009 INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
DIN EN ISO 11130:2010-12 CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION
I.S. EN ISO 17268:2016 GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012)
EN 14428:2015 Shower enclosures - Functional requirements and test methods
PREN 13561 : DRAFT 2014 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
I.S. EN 4710-01:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 01: TECHNICAL SPECIFICATION
PREN 16856 : DRAFT 2015 PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
ISO 28340:2013 Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 9635-1:2014 Agricultural irrigation equipment Irrigation valves Part 1: General requirements
ISO 12944-6:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
AEP-63 : 2009 PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
UNI EN 4704 : 2013 AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA)
UNI EN ISO 2081 : 2009 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
UNE-EN ISO 15584:2017 Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)
UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
15/30301583 DC : 0 BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION
16/30339220 DC : 0 BS EN 17001 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION
BS EN 14428 : 2015 SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
NF ISO 12151-3 : 2010 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
DIN EN ISO 19598:2015-07 (Draft) METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016)
EN ISO 9717:2017 Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
UNE-EN 12966:2015 Road vertical signs - Variable message traffic signs
UNE-EN ISO 9717:2013 Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2010)
I.S. EN 353-1:2014 PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
DIN EN 16927:2015-10 (Draft) MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
ISO 23269-1:2008 Ships and marine technology — Breathing apparatus for ships — Part 1: Emergency escape breathing devices (EEBD) for shipboard use
I.S. EN ISO 10683:2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
I.S. EN ISO 1456:2009 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM
ISO 16380:2014 Road vehicles — Blended fuels refuelling connector
ISO 11154-1:1995 Road vehicles Roof load carriers Part 1: Roof bars
I.S. EN ISO 2080:2009 METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY
ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
I.S. EN 4473:2010 AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION
ISO 17268:2012 Gaseous hydrogen land vehicle refuelling connection devices
BS EN 13120:2009+A1:2014 Internal blinds. Performance requirements including safety
DIN EN ISO 12402-7:2015-08 (Draft) PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 17872:2007-06 PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING
DIN EN ISO 12402-9:2015-08 (Draft) PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
DIN EN 13659:2015-07 SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN ISO 10308:2006-04 METALLIC COATINGS - REVIEW OF POROSITY TESTS
DIN EN 13298:2003-11 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL
BS EN 13659:2015 Shutters and external venetian blinds. Performance requirements including safety
BS EN ISO 10308:2006 Metallic coatings. Review of porosity tests
BS EN 13200-4:2006 Spectator facilities Seats. Product characteristics
UNE-EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
BS EN 12373-1:2001 Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium
14/30299887 DC : 0 BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
BS EN 396:1994 Lifejackets and personal buoyancy aids. Lifejacket 150
BS EN 10223-3:2013 Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes
ISO 11439:2013 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
I.S. EN ISO 5912:2011 CAMPING TENTS (ISO 5912:2011)
BS EN 505:2013 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
BS EN ISO 21227-3:2007 Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging Evaluation of delamination and corrosion around a scribe
BS EN 3769:1997 Electrolytic polishing of corrosion resisting steels and heat resisting alloys
BS EN 1359:2017 Gas meters. Diaphragm gas meters
BS EN 1036-2:2008 Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
UNE-EN ISO 15027-2:2013 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
ISO 17872:2007 Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO 4527:2003 Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods
BS EN 13071:2002 Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
BS EN 14455:2005 Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B
BS EN 3027:1994 Test method for dry film lubricants. Salt spray test
ISO 19598:2016 Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
BS EN ISO 15027-2:2012 Immersion suits Abandonment suits, requirements including safety
BS EN ISO 4623-2:2004 Paints and varnishes. Determination of resistance to filiform corrosion Aluminium substrates
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
BS EN 15081:2007 Industrial valves. Mounting kits for part-turn valve actuator attachment
BS EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
ISO 10308:2006 Metallic coatings Review of porosity tests
DIN EN 16716:2017-05 MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 19598:2017-04 METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016)
EN 1036 : 1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
DIN EN ISO 5912:2013-08 CAMPING TENTS (ISO 5912:2011)
EN 13434:2006 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B
DIN EN 14817:2006-08 Railway applications - Suspension components - Air spring control elements
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
EN 12966:2014 Road vertical signs - Variable message traffic signs
EN 12329 : 2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 61914:2016 Cable cleats for electrical installations
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
DIN EN ISO 2081:2009-05 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
UNI EN ISO 11439 : 2013 GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES
DIN EN 13959:2005-01 Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
DIN EN 671-2:2012-07 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
DIN EN 671-1:2012-07 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
DIN EN 14454:2005-08 Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A
EN 1036-1:2007 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
DIN EN ISO 3613:2011-04 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010)
EN 12373-1 : 2001 ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
DIN EN 14452:2005-08 Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005
EN 61537:2007 Cable management - Cable tray systems and cable ladder systems
EN 12841:2006 Personal fall protection equipment - Rope access systems - Rope adjustment devices
EN 14601:2005+A1:2010 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 13200-4:2006 Spectator facilities - Part 4: Seats - Product characteristics
DIN EN ISO 14923:2003-10 THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
DIN EN 14140:2017-01 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
DIN ISO 12151-3:2012-08 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)
DIN EN ISO 4521:2009-01 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
DIN EN 14506:2005-08 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
DIN EN 14200:2004-05 Railway applications - Suspension components - Parabolic springs, steel
DIN ISO 15171-1:2004-05 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
DIN EN 15081:2008-03