I.S. EN ISO 11118:2015&LC:2015-12
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
DIN EN ISO 11118:2016-03
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
BS EN ISO 9809-2:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
06/30148179 DC : DRAFT SEP 2006
|
ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
12/30251283 DC : 0
|
BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
PREN 1554 : DRAFT 2011
|
CONVEYOR BELTS - DRUM FRICTION TESTING |
06/30148176 DC : DRAFT SEP 2006
|
ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
I.S. EN ISO 9809-2:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN ISO 15749-2:2004
|
Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for gravity system |
BS EN ISO 9455-12:1994
|
Soft soldering fluxes. Test methods Steel tube corrosion test |
DIN EN ISO 15749-3:2004-09
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004) |
BS EN ISO 9809-1:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
I.S. EN ISO 9809-1:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
UNI EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
BS ISO 22968:2010
|
Forced draught oil burners |
I.S. EN ISO 9809-3:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
NF EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
UNI EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 20238:2018
|
Conveyor belts — Drum friction testing |
EN 267:2009+A1:2011
|
Automatic forced draught burners for liquid fuels |
DIN EN 1554:2012-10
|
CONVEYOR BELTS - DRUM FRICTION TESTING |
DIN EN 13617-1:2012-08
|
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
DIN EN 267:2012-03 (Draft)
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 267:2011-11
|
Automatic forced draught burners for liquid fuels |
BS EN 1554:2012
|
Conveyor belts. Drum friction testing |
I.S. EN ISO 9455-12:1995
|
SOFT SOLDERING FLUXES - TEST METHODS - PART 12: STEEL TUBE CORROSION TEST |
I.S. EN 13617-1:2012
|
PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
VDI 6002 Blatt 1:2014-03
|
Solar heating for potable water - Basic principles - System technology and application in residential buildings |
NF EN ISO 9809-3 : 2011
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
PREN 13617-1 : DRAFT 2010
|
PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
10/30219405 DC : 0
|
BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
BS EN ISO 9809-3:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
12/30258099 DC
|
BS EN 267. Forced draught burners for liquid fuels |
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
BS ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
ISO 9809-4:2014
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
BS EN 267 : 2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
ISO 15749-3:2004
|
Ships and marine technology — Drainage systems on ships and marine structures — Part 3: Sanitary drainage, drain piping for vacuum systems |
UNI EN 267 : 2011
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
EN ISO 15749-3 : 2004
|
SHIPS AND MARINE TECHNOLOGY - DRAINAGE SYSTEMS ON SHIPS AND MARINE STRUCTURES - PART 3: SANITARY DRAINAGE, DRAIN PIPING FOR VACUUM SYSTEMS |
EN ISO 9455-12:1994
|
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992) |
UNI EN 13617-1 : 2012
|
PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
UNI EN 1554 : 2012
|
CONVEYOR BELTS - DRUM FRICTION TESTING |
NF EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
ISO 22968:2010
|
Forced draught oil burners |
06/30148173 DC : DRAFT SEP 2006
|
ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS ISO 22967:2010
|
Forced draught gas burners |
BS ISO 9809-4:2014
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
BS EN ISO 11118:2015
|
Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
UNE-EN ISO 11118:2016
|
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
ONORM EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
I.S. EN 267:2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
UNE-EN 1554:2012
|
Conveyor belts - Drum friction testing |
BS EN 13617-1:2012
|
Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
BS EN ISO 15749-3:2004
|
Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for vacuum system |
ONORM EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
ISO 11118:2015
|
Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
BS EN ISO 15749-5:2004
|
Ships and marine technology. Drainage systems on ships and marine structures Drainage of decks, cargo spaces and swimming pools |
ISO 15749-5:2004
|
Ships and marine technology — Drainage systems on ships and marine structures — Part 5: Drainage of decks, cargo spaces and swimming pools |
UNE-EN 13617-1:2012
|
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
ISO 9455-12:1992
|
Soft soldering fluxes Test methods Part 12: Steel tube corrosion test |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
EN ISO 11118 : 2015 COR 2015
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
DIN EN ISO 15749-5:2004-09
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004) |
EN ISO 15749-4 : 2004
|
SHIPS AND MARINE TECHNOLOGY - DRAINAGE SYSTEMS ON SHIPS AND MARINE STRUCTURES - PART 4: SANITARY DRAINAGE, SEWAGE DISPOSAL PIPES |
EN 1554:2012
|
Conveyor belts - Drum friction testing |
EN ISO 9809-1:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN ISO 9809-3:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN ISO 9809-2:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN ISO 15749-5 : 2004
|
SHIPS AND MARINE TECHNOLOGY - DRAINAGE SYSTEMS ON SHIPS AND MARINE STRUCTURES - PART 5: DRAINAGE OF DECKS, CARGO SPACES AND SWIMMING POOLS |
EN 286-1:1998/A2:2005
|
SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
EN ISO 15749-2 : 2004
|
SHIPS AND MARINE TECHNOLOGY - DRAINAGE SYSTEMS ON SHIPS AND MARINE STRUCTURES - PART 2: SANITARY DRAINAGE, DRAIN PIPING FOR GRAVITY SYSTEMS |
ISO 22967:2010
|
Forced draught gas burners |
I.S. EN 1554:2012
|
CONVEYOR BELTS - DRUM FRICTION TESTING |
11/30250552 DC : 0
|
BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING |
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
UNI EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
EN 13617-1:2012
|
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
ONORM EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 15749-4:2004
|
Ships and marine technology — Drainage systems on ships and marine structures — Part 4: Sanitary drainage, sewage disposal pipes |
ISO 15749-2:2004
|
Ships and marine technology — Drainage systems on ships and marine structures — Part 2: Sanitary drainage, drain piping for gravity systems |
BS EN 286-1 : 1998
|
SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
BS EN ISO 15749-4:2004
|
Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, sewage disposal pipes |
DIN EN ISO 15749-4:2004-09
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004) |
DIN EN ISO 9455-12:1994-11
|
SOFT SOLDERING FLUXES - TEST METHODS - PART 12: STEEL TUBE CORROSION TEST |
DIN EN ISO 15749-2:2004-09
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004) |