|
I.S. EN ISO 15630-3:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
I.S. EN 13121-3:2016
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
|
PD ISO/TR 12112:2018
|
Metallic materials. Principles and designs for multiaxial fatigue testing |
|
BS EN 61788-6:2011
|
Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
|
ISO 178:2010
|
Plastics Determination of flexural properties |
|
DIN EN ISO 20504:2016-10
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
|
ISO/TTA 5:2007
|
Code of practice for creep/fatigue testing of cracked components |
|
17/30353428 DC : DRAFT JUNE 2017
|
BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
|
BS EN 2002-005:2007
|
Aerospace series. Test methods for metallic materials Uninterrupted creep and stress-rupture testing |
|
DIN EN 13146-9:2011-12
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
|
ISO 7500-1:2018
|
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
|
17/30347199 DC : 0
|
BS EN ISO 204 - METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
I.S. EN 15157:2006
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
14/30271303 DC : 0
|
BS ISO 18338 - METALLIC MATERIALS - TORSION TEST AT AMBIENT TEMPERATURE |
|
BS ISO 10113 : 2006
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO |
|
EN ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
|
15/30323943 DC : 0
|
BS ISO 12106 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL-STRAIN-CONTROLLED METHOD |
|
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
|
13/30255569 DC : 0
|
BS ISO 17140 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
BS EN ISO 10113:2014
|
Metallic materials. Sheet and strip. Determination of plastic strain ratio |
|
ISO 10606:1995
|
Steel for the reinforcement of concrete Determination of percentage total elongation at maximum force |
|
NF EN 2002-005 : 2008
|
AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 5: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING |
|
ONORM EN ISO 15630-2 : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
BS ISO 18338:2015
|
Metallic materials. Torsion test at ambient temperature |
|
DIN EN ISO 10275 E : 2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
|
08/30188330 DC : DRAFT AUG 2008
|
BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
17/30326157 DC : 0
|
BS EN 13146-1 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
12/30265759 DC : 0
|
BS EN 845-3 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK |
|
07/30144366 DC : 0
|
BS ISO 6892 - METALLIC MATERIALS - TENSILE TESTING - METHOD OF TESTING AT AMBIENT TEMPERATURE |
|
14/30268531 DC : 0
|
BS EN ISO 6892-1 - METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE |
|
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
DIN EN 1071-9:2009-10
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN |
|
06/30149355 DC : 0
|
EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
|
04/30111867 DC : DRAFT APR 2004
|
ISO 20504 - FINE CERAMICS - (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT AMBIENT TEMPERATURE |
|
ISO 204:2009
|
Metallic materials Uniaxial creep testing in tension Method of test |
|
UNE-EN 13146-9:2011
|
Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
|
ISO 12106:2017
|
Metallic materials — Fatigue testing — Axial-strain-controlled method |
|
PREN 13146-2 : DRAFT 2009
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 2: DETERMINATION OF TORSIONAL RESISTANCE |
|
ISO 12135:2016
|
Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
|
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
|
EN 12390-13:2013
|
Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
|
ONORM EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ONORM EN ISO 6892-2 : 2011
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
ISO/TR 12112:2018
|
Metallic materials Principles and designs for multiaxial fatigue testing |
|
ISO 15835-2:2009
|
Steels for the reinforcement of concrete Reinforcement couplers for mechanical splices of bars Part 2: Test methods |
|
UNE-EN 13146-1:2012
|
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint |
|
ONORM EN ISO 204 : 2009
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
NF EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS |
|
UNI EN ISO 15630-1 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
UNI EN 13146-9 : 2011
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
|
UNI EN 13146-1 : 2014
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
NF EN ISO 204 : 2009
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
ISO 10113:2006
|
Metallic materials Sheet and strip Determination of plastic strain ratio |
|
I.S. EN ISO 527-1:2012
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
|
DIN EN 13146-1:2015-01
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
DIN EN 13146-4:2015-01
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
|
EN 13146-4:2012+A1:2014
|
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |
|
BS EN 15157:2006
|
Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude |
|
BS EN ISO 12737:2010
|
Metallic materials. Determination of plane-strain fracture toughness |
|
BS EN ISO 11960:2014
|
Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
|
ONORM EN 12390-13 : 2013
|
TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
|
EN 61788-18:2013
|
Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
|
EN 1071-9:2009
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain |
|
EN ISO 14604:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain (ISO 14604:2012) |
|
EN 13146-2:2012
|
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance |
|
DIN EN ISO 178:2013-09
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
|
EN 13121-3:2016
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
|
PREN 13146-1 : DRAFT 2017
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
BS EN 61788-19:2014
|
Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb3Sn composite superconductors |
|
14/30285784 DC : 0
|
BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
|
BS ISO 6892-4:2015
|
Metallic materials. Tensile testing Method of test in liquid helium |
|
17/30352962 DC : 0
|
BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
BS ISO 17142 : 2014
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
96/711730 DC : DRAFT SEP 1996
|
ISO 12135 METALLIC MATERIALS - UNIFIED METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS |
|
ISO 22889:2013
|
Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
|
DIN EN ISO 178 E : 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
|
I.S. EN ISO 17140:2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE (ISO 17140:2014) |
|
07/30162943 DC : 0
|
BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
05/30126727 DC : DRAFT JUL 2005
|
ISO 22889 - METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF RESISTANCE TO STABLE CRACK EXTENSION USING SPECIMENS OF LOW CONSTRAINT |
|
BS EN ISO 10275:2014
|
Metallic materials. Sheet and strip. Determination of tensile strain hardening exponent |
|
UNI EN ISO 10113 : 2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO |
|
09/30178652 DC : 0
|
BS EN ISO 6892-2 - METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
BS EN ISO 17142:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude |
|
BS ISO 13314:2011
|
Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals |
|
BS EN ISO 17140:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude |
|
06/19976125 DC : 0
|
BS ISO 15653 - METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF FRACTURE TOUGHNESS OF WELDS |
|
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
09/30155621 DC : 0
|
BS ISO 15698-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 2: TEST METHODS |
|
I.S. EN ISO 10113:2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO (ISO 10113:2006, CORRECTED VERSION 2007-08-01) |
|
I.S. EN ISO 204:2009
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
API 934-A : 2008
|
MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
|
I.S. EN ISO 178:2010
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010) |
|
BS EN ISO 11961:2008
|
Petroleum and natural gas industries. Steel drill pipe |
|
ONORM EN ISO 15630-1 : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
ISO 18338:2015
|
Metallic materials Torsion test at ambient temperature |
|
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
EN ISO 7500-1:2018
|
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) |
|
UNI EN ISO 178 : 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
DIN EN ISO 15630-2:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
ISO 12111:2011
|
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method |
|
NF EN ISO 6892-2 : 2011
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
UNI EN ISO 10275 : 2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
CEI EN 61788-18 : 2014
|
SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
|
DIN EN ISO 7500-1:2016-05
|
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
|
DIN EN ISO 15630-1:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
EN ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010) |
|
ISO 6892-4:2015
|
Metallic materials Tensile testing Part 4: Method of test in liquid helium |
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
|
ISO 783:1999
|
Metallic materials Tensile testing at elevated temperature |
|
DIN EN ISO 22674:2016-09
|
Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
|
ISO 17142:2014
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of fatigue properties at constant amplitude |
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
|
ISO 18265:2013
|
Metallic materials Conversion of hardness values |
|
I.S. EN 13146-2:2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 2: DETERMINATION OF TORSIONAL RESISTANCE |
|
I.S. EN ISO 12737:2010
|
METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
|
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
|
I.S. EN ISO 1924-2:2009
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
|
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
I.S. EN 845-3:2013
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK |
|
DIN EN 13121-3:2016-10
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
|
I.S. EN ISO 1798:2008
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
|
I.S. EN ISO 22674:2016
|
DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016) |
|
UNI EN ISO 12737 : 2011
|
METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
|
ISO 19819:2004
|
Metallic materials Tensile testing in liquid helium |
|
14/30292915 DC : 0
|
BS ISO 18488 - POLYETHYLENE (PE) MATERIALS FOR PIPING SYSTEMS - DETERMINATION OF STRAIN HARDENING MODULUS IN RELATION TO SLOW CRACK GROWTH - TEST METHOD |
|
BS EN ISO 178 : 2010
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
08/30185921 DC : 0
|
BS EN 1071-9 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN |
|
DIN EN ISO 15630-3 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
BS ISO 12111:2011
|
Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method |
|
13/30257993 DC : 0
|
BS EN ISO 6892-3 - METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE |
|
BS EN ISO 6892-1:2016
|
Metallic materials. Tensile testing Method of test at room temperature |
|
DIN ISO 10275:2009-06
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
BS EN ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire |
|
14/30263397 DC : 0
|
BS EN ISO 22674 - DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES |
|
BS ISO 17140 : 2014
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
UNI EN ISO 15630-3 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
|
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
|
17/30321021 DC : 0
|
BS ISO 20323 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT AMBIENT TEMPERATURE IN AIR ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES OF TUBES |
|
CEI EN 61788-19 : 2014
|
SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
|
13/30255572 DC : 0
|
BS ISO 17142 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
BS ISO 10275 : 2007
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
BS ISO 18488:2015
|
Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method |
|
17/30352970 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
05/19976779 DC : DRAFT JUN 2005
|
BS ISO 15835-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - MECHANICAL SPLICES FOR BARS - PART 2: TEST METHODS |
|
BS EN ISO 6892-3:2015
|
Metallic materials. Tensile testing Method of test at low temperature |
|
BS ISO 19819:2004
|
Metallic materials. Tensile testing in liquid helium |
|
ISO 13314:2011
|
Mechanical testing of metals Ductility testing Compression test for porous and cellular metals |
|
ISO 6892-2:2018
|
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature |
|
I.S. EN 61788-6:2011
|
SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
|
BS EN ISO 6892-2:2011
|
Metallic materials. Tensile testing Method of test at elevated temperature |
|
ONORM EN ISO 15630-3 : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
ASTM E 2714 : 2013 : REDLINE
|
Standard Test Method for Creep-Fatigue Testing |
|
I.S. EN ISO 15630-2:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
BS EN 13121-3:2016
|
GRP tanks and vessels for use above ground Design and workmanship |
|
I.S. EN 13146-1:2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
I.S. EN ISO 6892-2:2011
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
I.S. EN ISO 20504:2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
|
UNE-EN 13121-3:2017
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
|
BS EN ISO 20504:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature |
|
DIN EN 13146-2:2012-06
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 2: DETERMINATION OF TORSIONAL RESISTANCE |
|
EN 13146-1:2012+A1:2014
|
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint |
|
PREN 17096 : DRAFT 2017
|
GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
|
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
I.S. EN 2002-005:2007
|
AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 005: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING |
|
EN ISO 10113:2014
|
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006, Corrected version 2007-08-01) |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
UNE-EN 13146-2:2012
|
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance |
|
ISO 1798:2008
|
Flexible cellular polymeric materials Determination of tensile strength and elongation at break |
|
BIS IS 1608 : 2005
|
METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
|
UNE-EN ISO 10113:2014
|
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006, Corrected version 2007-08-01) |
|
UNE-EN ISO 12737:2011
|
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
|
EN ISO 10275:2014
|
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2007) |
|
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
|
UNI EN 13146-2 : 2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 2: DETERMINATION OF TORSIONAL RESISTANCE |
|
UNI EN ISO 1924-2 : 2009
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
|
UNI EN ISO 527-1 : 2012
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES |
|
UNI EN ISO 1798 : 2008
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
|
DIN EN 12390-13:2014-06
|
Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
|
ISO 22215:2006
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics |
|
11/30212253 DC : 0
|
BS ISO 14604 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN |
|
DIN EN ISO 6892-3:2015-07
|
METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
|
I.S. EN 15156:2006
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
|
09/30205074 DC : 0
|
BS EN 13146-2 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 2: DETERMINATION OF TORSIONAL RESISTANCE |
|
14/30291306 DC : 0
|
BS ISO 6892-4 - METALLIC MATERIALS - TENSILE TESTING - PART 4: METHOD OF TEST IN LIQUID HELIUM |
|
DIN EN ISO 10275:2014-08
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
|
DIN EN ISO 6892-2:2011-05
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
06/30113990 DC : DRAFT FEB 2006
|
ISO 10275 - METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
07/30162939 DC : 0
|
BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
14/30298583 DC : 0
|
BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
|
BS EN 16730:2016
|
Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
|
ISO 15733:2015
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties |
|
04/30125833 DC : DRAFT NOV 2004
|
ISO 22215 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE CREEP OF MONOLITHIC CERAMICS |
|
BS EN 12390-13:2013
|
Testing hardened concrete Determination of secant modulus of elasticity in compression |
|
BS ISO 22889:2013
|
Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
|
BS EN ISO 14604:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain |
|
BS ISO 15733:2015
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties |
|
10/30203543 DC : DRAFT NOV 2010
|
BS ISO 13314 - MECHANICAL TESTING OF METALS - DUCTILITY TESTING - COMPRESSION TEST FOR POROUS AND CELLULAR METALS |
|
DIN EN 16730:2016-09
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
|
UNI EN 12390-13 : 2013
|
TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
|
DIN EN ISO 6892-3 E : 2015
|
METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
|
BS EN 13146-9 : 2009
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
|
BS EN 61788-18:2013
|
Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
|
BS ISO 14604 : 2012
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN |
|
15/30293838 DC : 0
|
BS ISO 12135 - METALLIC MATERIALS - UNIFIED METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS |
|
ISO 15579:2000
|
Metallic materials Tensile testing at low temperature |
|
05/30096537 DC : DRAFT JUN 2005
|
ISO 10113 - METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO |
|
17/30335677 DC : 0
|
BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
I.S. EN 61788-18:2013
|
SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
|
17/30352966 DC : 0
|
BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC AND LATTICE GIRDER |
|
07/30167873 DC : DRAFT DEC 2007
|
BS EN 13146-9 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
|
BIS IS 11999 : 2007(R2009)
|
METHOD FOR DETERMINATION OF PLASTIC STRAIN RATIO 'R' FOR STEEL SHEETS |
|
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
DIN ISO 10113:2009-06
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO |
|
I.S. EN ISO 6892-1:2016
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
|
DIN EN ISO 15630-2 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
I.S. EN ISO 6892-3:2015
|
METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
|
ONORM EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
I.S. EN ISO 17142:2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE (ISO 17142:2014) |
|
I.S. EN 12390-13:2013
|
TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
|
PREN 845-3 : DRAFT 2012
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK |
|
UNI EN ISO 15630-2 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
NF EN ISO 15630-2 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
BS EN 13146-1 : 2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
UNE-EN ISO 204:2010
|
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
|
EN ISO 6892-2:2011
|
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
|
EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
|
I.S. EN 1071-9:2009
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN |
|
I.S. EN 13146-9:2009
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
|
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
|
DIN EN ISO 12737:2011-04
|
METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
|
ISO 1924-2:2008
|
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
|
UNE-EN ISO 6892-1:2017
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
|
IEC 61788-18:2013
|
Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
|
ISO 17140:2014
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at room temperature Determination of fatigue properties at constant amplitude |
|
ISO 14604:2012
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of fracture strain |
|
UNI EN 13146-4 : 2014
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
|
BS EN 845-3 : 2013
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
|
I.S. EN 13146-4:2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
|
ISO 18488:2015
|
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method |
|
ISO 12737:2010
|
Metallic materials Determination of plane-strain fracture toughness |
|
ISO 22674:2016
|
Dentistry — Metallic materials for fixed and removable restorations and appliances |
|
IEC 61788-19:2013
|
Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
|
ISO 20504:2006
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature |
|
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
|
BS EN ISO 1924-2:2008
|
Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min) |
|
EN 13146-9:2009+A1:2011
|
Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
|
ISO 10275:2007
|
Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
|
BS EN 15158:2006
|
Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude |
|
IEC 61788-6:2011
|
Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
|
ISO 6892:1998
|
Metallic materials Tensile testing at ambient temperature |
|
EN ISO 17142:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014) |
|
EN ISO 17140:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014) |
|
EN 845-3:2013+A1:2016
|
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK |
|
EN ISO 22674:2016
|
Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
|
EN ISO 20504:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature (ISO 20504:2006) |
|
EN 15158:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
|
EN 15156:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude |
|
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
|
EN ISO 6892-3:2015
|
Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
|
EN 15157:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
|
EN 16730:2016
|
Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
|
EN 2002-005 : 2007
|
AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 005: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING |
|
EN ISO 1924-2:2008
|
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
|
EN ISO 12737:2010
|
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
|
EN ISO 1798:2008
|
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
|
13/30280934 DC : 0
|
BS EN ISO 7500-1 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM |
|
NF EN ISO 178 : 2011 AMD 1 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
UNE-EN 16730:2017
|
Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
|
CEI EN 61788-6 : 2012
|
SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
|
I.S. CWA 15261-2:2005
|
MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
|
17/30369272 DC : 0
|
BS EN 4861 - AEROSPACE SERIES - METROLOGICAL ASSESSMENT PROCEDURE FOR KINEMATIC FIELDS MEASURED BY DIGITAL IMAGE CORRELATION |
|
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
BS ISO 12106:2017
|
Metallic materials. Fatigue testing. Axial-strain-controlled method |
|
UNE-EN ISO 6892-3:2015
|
Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
|
I.S. EN 61788-19:2014
|
SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
|
08/30096501 DC : DRAFT SEP 2008
|
BS ISO 12111 - METALLIC MATERIALS - FATIGUE TESTING - STRAIN-CONTROLLED THERMOMECHANICAL FATIGUE TESTING METHOD |
|
03/302717 DC : DRAFT FEB 2003
|
ISO 19819 - METALLIC MATERIALS - TENSILE TESTING IN LIQUID HELIUM |
|
UNE-EN ISO 10275:2014
|
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2007) |
|
DIN EN ISO 10113 E : 2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO (ISO 10113:2006) |
|
DIN EN 16730 E : 2016
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
|
07/30162947 DC : 0
|
BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
I.S. EN 16730:2016
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
|
09/30205071 DC : 0
|
BS EN 13146-1 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 1: DETERMINATION OF LONGITUDINAL RAIL RESTRAINT |
|
BS EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
|
BS EN 1071-9:2009
|
Advanced technical ceramics. Methods of test for ceramic coatings Determination of fracture strain |
|
DIN EN ISO 6892-1:2017-02
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
|
DIN EN ISO 20504 E : 2016
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
|
UNI EN 1071-9 : 2009
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN |
|
I.S. EN ISO 10275:2014
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
|
DIN EN ISO 204 E : 2009
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
DIN ISO 10275 E : 2009
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
DIN EN 12390-13:2014-06
|
TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
|
NF EN ISO 15630-1 : 2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
UNE-EN ISO 6892-2:2011
|
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
|
ISO 15630-1:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
|
UNI EN ISO 6892-2 : 2011
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
BS EN ISO 204:2009
|
Metallic materials. Uniaxial creep testing in tension. Method of test |
|
UNI EN ISO 204 : 2009
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
17/30353406 DC : 0
|
BS EN 17096 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
|
BS EN ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete. Test methods Welded fabric |
|
DIN EN ISO 15630-1 E : 2011
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
PREN 17129 : DRAFT 2017
|
CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
|
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ONORM EN ISO 178 : 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013) |
|
EN ISO 204:2009
|
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
|
ISO 15698-2:2012
|
Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods |
|
ISO 15630-2:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric |
|
I.S. EN ISO 15630-1:2010
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
I.S. EN ISO 7500-1:2018
|
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION -TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCEMEASURING SYSTEM (ISO 7500-1:2018) |
|
DIN EN ISO 1924-2:2009-05
|
PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
|
ISO 6892-3:2015
|
Metallic materials Tensile testing Part 3: Method of test at low temperature |
|
BS EN ISO 1798:2008
|
Flexible cellular polymeric materials. Determination of tensile strength and elongation at break |
|
BS EN 15156:2006
|
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude |
|
UNE-EN ISO 22674:2016
|
Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
|
BS EN 13146-2:2012
|
Railway applications. Track. Test methods for fastening systems Determination of torsional resistance |
|
BS EN ISO 22674:2016
|
Dentistry. Metallic materials for fixed and removable restorations and appliances |
|
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
|
BS EN 13146-4 : 2012
|
RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
|
BS EN ISO 527-1:2012
|
Plastics. Determination of tensile properties General principles |
|
DIN EN ISO 204:2009-10
|
METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
|
DIN EN ISO 527-1:2012-06
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
|
DIN EN ISO 1798:2008-04
|
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
|
EN 61788-6:2011
|
SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
|
DIN EN ISO 12737:1999-04
|
METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
|
EN 61788-19:2014
|
Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
|
DIN EN ISO 10113:2014-08
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF PLASTIC STRAIN RATIO (ISO 10113:2006) |
|
NBR ISO 6892-1 : 2013 ERRATA 1 2015
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE |
|
UNE-EN 13146-4:2012
|
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |