ISO/CIE 19476:2014
Current
The latest, up-to-date edition.
Characterization of the performance of illuminance meters and luminance meters
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Russian, French, English
30-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/CIE 19476:2014 is applicable to illuminance and luminance meters. It defines quality indices characterizing the performance of such devices in a general lighting measurement situation, as well as measurement procedures for the individual indices and standard calibration conditions.
Measurements of illuminance or luminance and their accuracy are influenced by various parameters, such as operational conditions, properties of light sources, as well as characteristics of the applied photometers. The characteristics of these photometers alone do not allow the determination of the measurement uncertainty for a specific measurement task. Nevertheless, it is generally true that instruments with "better" characteristics in most cases produce smaller uncertainties than instruments with "worse" properties.
| DocumentType |
Standard
|
| Pages |
39
|
| ProductNote |
This standard also refers to CIE 202:2011, CIE S 017/E:2011, CIE 198:2011, CIE 114/4-1994.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO/CIE 19476:2014 | Identical |
| ISO 16069:2017 | Graphical symbols — Safety signs — Safety way guidance systems (SWGS) |
| BS EN 13032-4:2015 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires |
| BS EN ISO 8254-2:2003 | Paper and board. Measurement of specular gloss 75° gloss with a parallel beam, DIN method |
| EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| IES LM 78 : 2017 | TOTAL FLUX MEASUREMENT OF LAMPS USING AN INTEGRATING SPHERE |
| BS ISO 16069:2017 | Graphical symbols. Safety signs. Safety way guidance systems (SWGS) |
| I.S. EN 1436:2018 | ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| I.S. EN ISO 8254-2:2016 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 2: 75 DEGREE GLOSS WITH A PARALLEL BEAM, DIN METHOD (ISO 8254-2:2016) |
| EN 1436:2018 | Road marking materials - Road marking performance for road users and test methods |
| PREN 1436 : DRAFT 2016 | ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| IEC 62595-2-1:2016 | Display lighting unit - Part 2-1: Electro-optical measuring methods of LED backlight unit |
| UNE-EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| 16/30338927 DC : 0 | BS EN 1436 - ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| DIN EN 13032-4:2015-08 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| BS EN 1436:2018 | Road marking materials. Road marking performance for road users and test methods |
| UNE-EN 1436:2009+A1:2009 | Road marking materials - Road marking performance for road users |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| UNE-EN 13032-4:2016 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| 16/30304031 DC : 0 | BS ISO 19237 - INTELLIGENT TRANSPORT SYSTEMS - PEDESTRIAN DETECTION AND COLLISION MITIGATION SYSTEMS (PDCMS) - PERFORMANCE REQUIREMENTS AND TEST PROCEDURES |
| 16/30322000 DC : 0 | BS ISO 16069 - GRAPHICAL SYMBOLS - SAFETY SIGNS - SAFETY WAY GUIDANCE SYSTEMS (SWGS) |
| PD CEN/TS 17108:2017 | Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice |
| IES LM 45 : 2015 | METHOD FOR THE ELECTRICAL AND PHOTOMETRIC MEASUREMENT OF GENERAL SERVICE INCANDESCENT FILAMENT LAMPS |
| I.S. EN 13032-4:2015 | LIGHT AND LIGHTING - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| S.R. CEN/TR 17108:2017 | NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE |
| ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
| IEC 62629-22-1:2016 | 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical |
| CEN/TR 17108:2017 | Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice |
| IEC 60051-1:2016 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
| ISO 23539:2005 | Photometry — The CIE system of physical photometry |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| AS 4852.2:2019 | Variable message signs Portable signs |
| AS 4852.1:2019 | Variable message signs Fixed signs |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.