![header thumbnail](/images/publishers\iso_cover.gif)
ISO Guide 64:2008
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\iso_cover.gif)
Guide for addressing environmental issues in product standards
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, Russian, French
27-08-2008
ISO Guide 64:2008 provides guidance on addressing environmental issues in product standards. It is primarily intended for product standards writers. Its purpose is
- to outline the relationship between the provisions in product standards and the environmental aspects and impacts of the product,
- to assist in drafting or revising provisions in product standards in order to reduce potential adverse environmental impacts at different stages of the entire product life-cycle,
- to emphasize that taking into account environmental issues in product standards is a complex process and requires balancing competing priorities,
- to recommend the use of life-cycle thinking when defining environmental provisions for a product for which a standard is being drafted, and
- to promote the future development of relevant sector guides for addressing environmental issues in product standards by standards writers, consistent with the principles and approaches of ISO Guide 64:2008.
Whenever a new product standard is drafted or an existing product standard is revised or intended to be revised, the project managers and their technical committee chairman/convenors are encouraged to actively promote the application of this Guide. Furthermore, at any stage in the standard development process, experts are encouraged to include environmental issues in their comments.
In order to take account of the diversity of products and their specific environmental impacts, as well as the need for relevant environmental knowledge, it is useful for standards writers to involve environmental experts in the work. The project managers and their technical committee chairman/convenors might wish to take into account other relevant, current sector-specific guidance and environmental provisions identified in related standards.
Unless they are closely related with environmental issues, ISO Guide 64:2008 does not address issues of occupational health and safety or consumer safety as separate or specific aspects of the product life cycle. Standards writers can find guidance on these issues in other guides.
Committee |
ISO/TC 207
|
DocumentType |
Guide
|
Pages |
36
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN NPR ISO GUIDE 64 : 2008 | Identical |
JIS Q 0064:2014 | Identical |
UNE-ISO GUIA 64:2010 | Identical |
CSA ISO GUIDE 64 : 1998 | Identical |
DIN-Fachbericht 54:2003 | Corresponds |
DIN-Fachbericht 59:1997 | Corresponds |
EN ISO 14031:2013 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
IEC 62933-1:2018 | Electrical energy storage (EES) systems - Part 1: Vocabulary |
BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
18/30348368 DC : 0 | BS ISO 30414 - HUMAN RESOURCE MANAGEMENT - GUIDELINES FOR HUMAN CAPITAL REPORTING FOR INTERNAL AND EXTERNAL STAKEHOLDERS |
ISO/IEC Guide 14:2018 | Products and related services — Information for consumers |
BS EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
06/30084693 DC : 0 | BS ISO 15392 - SUSTAINABILITY IN BUILDING CONSTRUCTION - GENERAL PRINCIPLES |
05/30139731 DC : DRAFT SEP 2005 | |
CSA ISO 14040 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
CSA ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
I.S. EN 62430:2009 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
EN IEC 62933-1:2018 | Electrical Energy Storage (EES) systems - Part 1: Vocabulary |
BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
BS EN ISO 14031:2013 | Environmental management. Environmental performance evaluation. Guidelines |
CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
DEFSTAN 00-00(PT2)/4(2009) : 2009 | STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS |
DEFSTAN 00-00(PT2)/5(2010) : 2010 | STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS |
DEFSTAN 00-00(PT2)/3(2008) : 2008 | STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS |
ISO/IEC 29142-3:2013 | Information technology — Print cartridge characterization — Part 3: Environment |
DIN 820-120:2012-09 | STANDARDIZATION - PART 120: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:1999) |
IEC TS 62933-4-1:2017 | Electrical energy storage (EES) systems - Part 4-1: Guidance on environmental issues - General specification |
13/30240399 DC : 0 | ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
DEFSTAN 00-00/1(2012) : 2012 | A STANDARD FOR DEFENCE STANDARDS: MANAGEMENT AND PRODUCTION |
CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
03/301880 DC : DRAFT FEB 2003 | IEC 62139 ED.1 - GUIDANCE FOR ADDITION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS |
DEFSTAN 00-00/2(2014) : 2014 | A STANDARD FOR DEFENCE STANDARDS: MANAGEMENT AND PRODUCTION |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
BS ISO 26000:2010 | Guidance on social responsibility |
ISO/IEC Guide 41:2003 | Packaging Recommendations for addressing consumer needs |
EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
DIN EN 15347 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
I.S. EN ISO 14031:2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013) |
DIN 820-12:2014-06 | STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014) |
CEI EN IEC 62933-1:2022 | Electrical Energy Storage (EES) systems Part 1: Vocabulary<br><br> |
BS 0-2:1997 | A standard for standards Recommendations for committee procedures |
CSA ISO 14031 : 2014 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
17/30351251 DC : 0 | BS EN 62959 - ENVIRONMENTAL CONSCIOUS DESIGN (ECD) - PRINCIPLES, REQUIREMENTS AND GUIDANCE |
05/30103388 DC : DRAFT APR 2005 | ISO 14040 - ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
17/30333280 DC : 0 | BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
PD ISO/TR 24699:2009 | Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards |
11/30249097 DC : 0 | BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
S.R. CLC/TR 62125:2008 | ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES |
17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS ISO/IEC 29142-3:2013 | Information technology. Print cartridge characterization Environment |
CSA ISO 14040 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
ISO/TR 24699:2009 | Rubber and rubber products Environmental aspects General guidelines for their inclusion in standards |
ISO/IEC Guide 76:2008 | Development of service standards Recommendations for addressing consumer issues |
ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General |
IEC TR 62139:2004 | Guidelines for the addition of environmental aspects in product standards specitif to TC 23 |
I.S. EN ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
EN ISO 14040:2006 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
BS ISO 15392:2008 | Sustainability in building construction. General principles |
12/30241112 DC : DRAFT JAN 2012 | BS EN ISO 14031 - ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
PD CLC/TR 62125:2008 | Environmental statement specific to TC 20. Electric cables |
17/30356253 DC : 0 | BS EN 62933-1 - ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: TERMINOLOGY |
11/30242519 DC : DRAFT JAN 2011 | BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT |
UNE-ISO 26000:2012 | Guidance on social responsibility |
CEI CLC/TR 62125 : 2011 | ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES |
I.S. EN IEC 62933-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 1: VOCABULARY |
ISO 15392:2008 | Sustainability in building construction General principles |
ISO Guide 82:2014 | Guidelines for addressing sustainability in standards |
BS ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents General |
CEI EN 62430 : 2011 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
UNI EN ISO 14031 : 2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
DIN EN ISO 14040:2009-11 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); German and English version EN ISO 14040:2006 |
ISO 26000:2010 | Guidance on social responsibility |
BS EN ISO 14040:2006 | Environmental management. Life cycle assessment. Principles and framework |
ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
ISO 14031:2013 | Environmental management Environmental performance evaluation Guidelines |
EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
BS 7971-2:2003 | Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment |
DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
PD ISO/IEC GUIDE 51:2014 | Safety aspects. Guidelines for their inclusion in standards |
IEC 62430:2009 | Environmentally conscious design for electrical and electronic products |
S.R. CEN TR 15353:2007 | PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS |
UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
UTE TR 62125 : 2008 | ENVIRONMENTAL STATEMENT SPECIFIC TO CENELEC TC 20 - ELECTRIC CABLES |
DEFSTAN 00-00(PT2)/2(1999) : 1999 | STANDARDS FOR DEFENCE - PRESENTATION AND MANAGEMENT OF DEFENCE STANDARDS |
ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
IEC TR 62125:2007 | Environmental statement specific to IEC TC 20 - Electric cables |
CLC/TR 62125:2008 | Environmental statement specific to TC 20 - Electric cables |
INCITS/ISO/IEC 29142-3:2013(R2023) | Information Technology - Print Cartridge Characterization - Part 3: Environment |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
AS ISO 30414:2020 | Human resource management - Guidelines for internal and external human capital reporting |
ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
EN 15039:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts |
AS ISO 14040:2019 | Environmental management - Life cycle assessment - Principles and framework |
EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
ISO 23747:2015 | Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
EN 12975-1:2006+A1:2010 | Thermal solar systems and components - Solar collectors - Part 1: General requirements |
EN 15312:2007+A1:2010 | Free access multi-sports equipment - Requirements, including safety and test methods |
EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
ISO 14020:2000 | Environmental labels and declarations — General principles |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9001:2015 | Quality management systems — Requirements |
EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
ISO 16201:2006 | Technical aids for persons with disability — Environmental control systems for daily living |
EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
EN 14717:2005 | Welding and allied processes - Environmental check list |
ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
ISO 14050:2009 | Environmental management Vocabulary |
IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
CEN/TS 14541:2013 | Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.