![header thumbnail](/images/publishers\iso_cover.gif)
ISO/IEC 7811-1:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
![header thumbnail](/images/publishers\iso_cover.gif)
Identification cards Recording technique Part 1: Embossing
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-03-2019
English
25-08-2014
ISO/IEC 7811-1:2014 is one of a series of International Standards describing the parameters for identification cards as defined in the definitions clause and the use of such cards for international interchange.
It specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human and machine aspects and states minimum requirements.
It is the purpose of ISO/IEC 7811-1:2014 to provide criteria to which cards shall perform. No consideration is given to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria should be negotiated between the involved parties.
ISO/IEC 10373 1 specifies the test procedures used to check cards against the parameters specified in ISO/IEC 7811-1:2014.
DevelopmentNote |
Supersedes ISO 3554 (04/2001) Supersedes ISO/IEC 7811-3 (01/2003) Supersedes ANSI X4.16 (07/2004)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
INCITS/ISO/IEC 7811-1 : 2002 | Identical |
BS ISO/IEC 7811-1:2014 | Identical |
JIS X 6302-1:2016 | Identical |
CSA ISO/IEC 7811-1 : 2015 | Identical |
NEN ISO/IEC 7811-1 : 2014 | Identical |
IS 14147 : Part 1 : 2018 | Identical |
UNI ISO 7811-1 : 1988 | Identical |
NS ISO/IEC 7811-1 : 1ED 2004 | Identical |
SNV BS 7106-1 : 1990 | Identical |
UNE-EN ISO/IEC 7811-1:1997 | Identical |
NEN ISO 7811-1 : 1989 | Identical |
GOST R ISO/IEC 7811-1 : 2010 | Identical |
NBN EN 27811-1 : 1992 | Identical |
NBN EN 24909 : 1993 | Identical |
EN ISO/IEC 7811-1 : 1996 | Identical |
SAC GB/T 15120.1 : 2013 | Identical |
DIN EN ISO/IEC 7811-1:1997-07 | Identical |
UNI CEI EN ISO/IEC 7811-1 : 1998 | Identical |
BS EN ISO/IEC 7811-1:1996 | Identical |
I.S. EN ISO/IEC 7811-1:1997 | Identical |
SNV BS EN ISO/IEC 7811-1 : 1996 | Identical |
NF EN 27811-1 : 1989 | Identical |
DIN EN ISO-IEC 10373 : 1995 | IDENTIFICATION CARDS; TEST METHODS |
S.R. CEN ISO/TR 22411:2011 | ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES |
TS 102 221 : 13.0.0 | SMART CARDS; UICC-TERMINAL INTERFACE; PHYSICAL AND LOGICAL CHARACTERISTICS (RELEASE 14) |
BS ISO/IEC 7816-1:2011 | Identification cards. Integrated circuit cards Cards with contacts. Physical characteristics |
TS 151 011 : 4.15.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE |
BS EN 28583:1991 | Bank card originated messages. Interchange message specifications. Content for financial transactions |
BS ISO/IEC 7816-2:2007 | Identification cards. Integrated circuit cards Cards with contacts. Dimensions and location of the contacts |
ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
BS ISO 4909:2000 | Bank cards. Magnetic stripe data content for track 3 |
07/30162877 DC : 0 | BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS |
BS 7107:1990 | Procedure for allocating international issuer identification numbers (IINs) for use on identification cards |
ANSI INCITS 284 : 2011 | INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - HEALTH CARE IDENTIFICATION CARDS |
INCITS/ISO/IEC 15693-3 : 2001 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL |
ISO/IEC 18328-2:2015 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices |
INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
I.S. EN ISO/IEC 7813:1997 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
INCITS/ISO/IEC 15693-3 : 2001 : R2006 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL |
ISO/IEC 10373:1993 | Identification cards Test methods |
DIN EN 1332-5 E : 2006 | IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 5: RAISED TACTILE SYMBOLS FOR DIFFERENTIATION OF APPLICATION ON ID-1 CARDS |
EN 1332-5:2006 | Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards |
ETSI GSM 11.11 : 050300 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE |
BS EN 27813:1992 | Identification cards. Financial transaction cards |
ISO 20302:2014 | Health informatics Health cards Numbering system and registration procedure for issuer identifiers |
BS EN ISO 10536-1:1995 | Identification cards. Contactless integrated circuit(s) cards Physical characteristics |
NF ETS 300 331 : 1998 | RADIO EQUIPMENT AND SYSTEMS (RES) - DIGITAL EUROPEAN CORDLESS TELECOMMUNICATIONS (DECT) - DECT AUTHENTICATION MODULE (DAM) |
BS 7100:1990 | Method of formatting electronic messages relating to financial transactions for exchange between financial institutions |
17/30359941 DC : 0 | BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS |
EN ISO/IEC 10373 : 1995 | IDENTIFICATION CARDS - TEST METHODS |
CAN/CSA-ISO/IEC 18328-2:16 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices (Adopted ISO/IEC 18328-2:2015, first edition, 2015-11-01) |
ISO 4909:2000 | Bank cards Magnetic stripe data content for track 3 |
I.S. EN ISO/IEC 7811-3:1997 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS |
CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) |
BS EN ISO/IEC 10373:1995 | Identification cards. Test methods |
AIIM TR32 : 0 | PAPER FORMS DESIGN OPTIMIZATION FOR ELECTRONIC IMAGE MANAGEMENT (EIM) |
INCITS/ISO/IEC 10536-3 : 2008 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 3: ELECTRONIC SIGNALS AND RESET PROCEDURES |
BS PD ISO/TR 22411 : 2008 | |
BS 6571-5:1989 | Vehicle parking control equipment Guide to the requirements for non-coin operated apparatus for use with parking control equipment |
09/30213280 DC : 0 | BS ISO/IEC 7816-1 - IDENTIFICATION CARDS - INTEGRATED CARDS - CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
BS EN ISO/IEC 7813:1996 | Identification cards. Financial transaction cards |
INCITS/ISO/IEC 7811-3 : 1995 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON LD-1 CARDS |
INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
CAN/CSA-ISO/IEC 10536-2-98 (R2011) | Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas (Adopted ISO/IEC 10536-2:1995) |
CSA ISO/IEC 10536-2 : 1998 : R2002 : FR | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 2: DIMENSIONS AND LOCATION OF COUPLING AREAS |
I.S. EN 27813:1993 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
ANSI X9.107 : 2003 | BANK CARDS-MAGNETIC STRIPE DATA CONTENT FOR TRACK 3 |
TS 131 122 : 13.0.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; UNIVERSAL SUBSCRIBER IDENTITY MODULE (USIM) CONFORMANCE TEST SPECIFICATION (3GPP TS 31.122 VERSION 14.0.0 RELEASE 14) |
ISO/IEC 7816-2:2007 | Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts |
BS EN 1332-5:2006 | Identification card systems. Man-machine interface Raised tactile symbols for differenciation of application on ID-1 cards |
EN 1387:1996 | Machine readable cards - Health care applications - Cards: General characteristics |
DD ENV 14062-1:2001 | Identification card systems. Surface transport applications. Electronic fee collection Physical characteristics, electronic signals and transmission protocols |
BIS IS/ISO 21188 : 2006 | PUBLIC KEY INFRASTRUCTURE FOR FINANCIAL SERVICES - PRACTICES AND POLICY FRAMEWORK |
BS ISO/IEC 10536-1:2000 | Identification cards. Contactless integrated circuit(s) cards Close-coupled cards. Physical characteristics |
CSA ISO/IEC 7811-3 : 0 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS |
I.S. EN 27816-1:1991 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
I.S. EN ISO 10373:1995 | IDENTIFICATION CARDS - TEST METHODS |
ISO/TR 22411:2008 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
ISO/IEC 7811-3:1995 | Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards |
EN 28583 : 1991 | FINANCIAL TRANSACTION CARD ORIGINATED MESSAGES - INTERCHANGE MESSAGE SPECIFICATIONS |
EN ISO/IEC 7813 : 1996 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
EN 27816-1 : 1989 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
EN 27813:1992/AC:1992 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
EN ISO/IEC 7811-3 : 1996 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS |
BS ISO 20302:2014 | Health informatics. Health cards. Numbering system and registration procedure for issuer identifiers |
05/30084397 DC : DRAFT MAY 2005 | ISO 20302 - HEALTH INFORMATICS - HEALTH CARDS - NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS |
BS ISO/IEC 18328-2:2015 | Identification cards. ICC-managed devices Physical characteristics and test methods for cards with devices |
PD CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
ISO/TR 13950:1997 | Plastics pipes and fittings Automatic recognition systems for electrofusion |
INCITS/ISO/IEC 10536-2 : 1995 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 2: DIMENSIONS AND LOCATION OF COUPLING AREAS |
INCITS/ISO/IEC 7816-1 : 2014 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
ANSI X9.1 : 1991 | BANK CARDS - MAGNETIC STRIPE CONTENT FOR TRACK 3 |
06/30157189 DC : DRAFT OCT 2006 | BS ISO/IEC 7816-2 - IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS |
EN ISO/IEC 10536-1 : 1994 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 1: PHYSICAL CHARACTERISTICS |
INCITS/ISO/IEC 10536-1 : 1992 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - CLOSE COUPLED CARDS - PART 1: PHYSICAL CHARACTERISTICS |
ISO/IEC 10536-3:1996 | Identification cards Contactless integrated circuit(s) cards Part 3: Electronic signals and reset procedures |
TS 102 230-2 : 9.0.0 | SMART CARDS; UICC-TERMINAL INTERFACE; PHYSICAL, ELECTRICAL AND LOGICAL TEST SPECIFICATION; PART 2: UICC FEATURES (RELEASE 9) |
TS 100 977 : 8.14.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE |
I.S. EN ISO/IEC 10536-1:1995 | IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 1: PHYSICAL CHARACTERISTICS |
TS 101 086 : 8.2.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SUBSCRIBER IDENTITY MODULE (SIM) TEST SPECIFICATION |
DIN EN 1332-5:2006-07 | Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differentiation of application on ID-1 cards |
CSA ISO/IEC 7816-2 : 2008 : R2013 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS |
CAN/CSA-ISO/IEC 7816-2-08 (R2018) | Identification cards - Integrated circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts (Adopted ISO/IEC 7816-2:2007, second edition, 2007-10-15) |
ISO/IEC 14443-1:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 1: Physical characteristics |
ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
ISO/IEC 7812-2:2017 | Identification cards — Identification of issuers — Part 2: Application and registration procedures |
ISO 1073-2:1976 | Alphanumeric character sets for optical recognition Part 2: Character set OCR-B Shapes and dimensions of the printed image |
ISO 1831:1980 | Printing specifications for optical character recognition |
ISO/IEC 7812-1:2017 | Identification cards — Identification of issuers — Part 1: Numbering system |
ISO/IEC 7810:2003 | Identification cards Physical characteristics |
ISO/IEC 7811-9:2015 | Identification cards — Recording technique — Part 9: Tactile identifier mark |
ISO 1073-1:1976 | Alphanumeric character sets for optical recognition Part 1: Character set OCR-A Shapes and dimensions of the printed image |
ISO/IEC 15693-1:2010 | Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.