• There are no items in your cart

ISO/IEC 7811-6:2014

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Identification cards Recording technique Part 6: Magnetic stripe High coercivity

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

15-07-2021

Language(s)

English

Published date

25-08-2014

ISO/IEC 7811-6:2014 defines the characteristics for identification cards as defined therein and the use of such cards for international interchange.

It specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card, the encoding technique, and coded character sets. It takes into consideration both human and machine aspects and states minimum requirements.

Coercivity influences many of the quantities specified in ISO/IEC 7811-6:2014 but is not itself specified. The main characteristic of the high coercivity magnetic stripe is its improved resistance to erasure. This is achieved with minimal probability of damage to other magnetic stripes by contact while retaining read compatibility with magnetic stripes as defined in ISO/IEC 7811-2.

ISO/IEC 7811-6:2014 provides criteria to which cards are to perform. No consideration is given to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria is negotiated between the involved parties.

ISO/IEC 10373-2 specifies the test procedures used to check cards against the parameters specified in ISO/IEC 7811-6:2014.

DevelopmentNote
Supersedes ISO/IEC 7811-4 and ISO/IEC 7811-5 (02/2001)
DocumentType
Standard
Pages
22
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

08/30175746 DC : DRAFT JAN 2008 BS ISO/IEC 11695-2 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - HOLOGRAPHIC RECORDING METHOD - PART 2: DIMENSIONS AND LOCATION OF ACCESSIBLE OPTICAL AREA
BS ISO/IEC 24789-2:2011 Identification cards. Card service life Methods of evaluation
BS ISO 20302:2014 Health informatics. Health cards. Numbering system and registration procedure for issuer identifiers
CAN/CSA-ISO/IEC 7816-2-08 (R2018) Identification cards - Integrated circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts (Adopted ISO/IEC 7816-2:2007, second edition, 2007-10-15)
BS ISO/IEC 7816-2:2007 Identification cards. Integrated circuit cards Cards with contacts. Dimensions and location of the contacts
06/30159593 DC : 0 BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
07/30162877 DC : 0 BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS
ANSI INCITS 284 : 2011 INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - HEALTH CARE IDENTIFICATION CARDS
BS ISO/IEC 15457-2:2007 Identification cards. Thin flexible cards Magnetic recording technique
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
05/30130520 DC : DRAFT MAR 2005 ISO 12176-3 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION-JOINTING POLYETHYLENE SYSTEMS - PART 3: OPERATOR'S BADGE
INCITS/ISO/IEC 15693-3 : 2001 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL
ISO/IEC 7811-2:2014 Identification cards Recording technique Part 2: Magnetic stripe Low coercivity
BS ISO 13950:2007 Plastics pipes and fittings. Automatic recognition systems for electrofusion joints
INCITS/ISO/IEC 15693-3 : 2001 : R2006 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL
INCITS/ISO/IEC 15457-2 : 2001 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUES
UNI CEI ISO/IEC 11694-2 : 2010 IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - LINEAR RECORDING METHOD - PART 2: DIMENSIONS AND LOCATION OF THE ACCESSIBLE OPTICAL AREA
ISO/IEC 24789-2:2011 Identification cards — Card service life — Part 2: Methods of evaluation
CEI UNI ISO/IEC 11694-2 : 2010 IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - LINEAR RECORDING METHOD - PART 2: DIMENSIONS AND LOCATION OF THE ACCESSIBLE OPTICAL AREA
BS ISO/IEC 11695-2:2015 Identification cards. Optical memory cards. Holographic recording method Dimensions and location of accessible optical area
14/30290697 DC : 0 BS ISO/IEC 11695-2 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - HOLOGRAPHIC RECORDING METHOD - PART 2: DIMENSIONS AND LOCATION OF ACCESSIBLE OPTICAL AREA
ISO 13950:2007 Plastics pipes and fittings Automatic recognition systems for electrofusion joints
10/30182317 DC : 0 BS ISO/IEC 24789-2 - IDENTIFICATION CARDS - CARD SERVICE LIFE - PART 2: METHODS OF EVALUATION
UNI CEI ISO/IEC 11693-2 : 2010 IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES
BS ISO 12176-3:2011 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Operator\'s badge
17/30359941 DC : 0 BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS
BS ISO/IEC 18013-2:2008 Information technology. Personal identification. ISO-compliant driving licence Machine-readable technologies
CSA ISO/IEC 15457-2 : 2008 : R2013 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE
CAN/CSA-ISO/IEC 15457-2-08 (R2018) Identification cards - Thin flexible cards - Part 2: Magnetic recording technique (Adopted ISO/IEC 15457-2:2007, second edition, 2007-06-15)
CAN/CSA-ISO/IEC 18328-2:16 Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices (Adopted ISO/IEC 18328-2:2015, first edition, 2015-11-01)
BS ISO/IEC 7811-2:2014 Identification cards. Recording technique Magnetic stripe. Low coercivity
13/30269784 DC : 0 BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
ISO 20302:2014 Health informatics Health cards Numbering system and registration procedure for issuer identifiers
CSA ISO/IEC 15457-3 : 2009 : R2014 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO/IEC 11693-2:2009 Identification cards Optical memory cards Part 2: Co-existence of optical memory with other machine readable technologies
09/30213280 DC : 0 BS ISO/IEC 7816-1 - IDENTIFICATION CARDS - INTEGRATED CARDS - CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CSA ISO/IEC 18013-1 : 2006 : R2011 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
CSA ISO/IEC 18013-1:2006 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
ISO/IEC 18013-1:2005 Information technology Personal identification ISO-compliant driving licence Part 1: Physical characteristics and basic data set
BS ISO/IEC 7811-7:2014 Identification cards. Recording technique Magnetic stripe. High coercivity, high density
ISO/IEC 7816-2:2007 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
UNI CEI ISO/IEC 18013-2 : 2011 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 2: MACHINE-READABLE TECHNOLOGIES
UNI CEI ISO/IEC 18013-1 : 2011 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
CSA ISO/IEC 7816-2 : 2008 : R2013 IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS
BS ISO/IEC 18328-2:2015 Identification cards. ICC-managed devices Physical characteristics and test methods for cards with devices
UNI ISO 12176-3 : 2014 PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 3: OPERATOR'S BADGE
BS ISO/IEC 10373-2:2015 Identification cards. Test methods Cards with magnetic stripes
BS ISO/IEC 7816-1:2011 Identification cards. Integrated circuit cards Cards with contacts. Physical characteristics
05/30127945 DC : DRAFT JAN 2005 ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
14/30291649 DC : 0 BS ISO/IEC 11693-3 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 3: AUTHENTICATION TECHNIQUES
BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards Test methods
ANSI INCITS 410 : 2015 INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - LIMITED USE (LU), PROXIMITY INTEGRATED CIRCUIT CARD (PICC)
BS ISO/IEC 11693-2:2009 Identification cards. Optical memory cards Co-existence of optical memory with other machine readable technology
ISO/IEC 7811-7:2014 Identification cards Recording technique Part 7: Magnetic stripe High coercivity, high density
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO/IEC 7816-1:2011 Identification cards Integrated circuit cards Part 1: Cards with contacts Physical characteristics
ISO/IEC 18013-2:2008 Information technology Personal identification ISO-compliant driving licence Part 2: Machine-readable technologies
ISO/IEC 11693-3:2015 Identification cards Optical memory cards Part 3: Authentication techniques
ISO 12176-3:2011 Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 3: Operator's badge
ISO/IEC 15457-3:2008 Identification cards — Thin flexible cards — Part 3: Test methods
ISO/IEC 11695-2:2015 Identification cards Optical memory cards Holographic recording method Part 2: Dimensions and location of accessible optical area
EN 753-3 : 1999 IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS
05/30084397 DC : DRAFT MAY 2005 ISO 20302 - HEALTH INFORMATICS - HEALTH CARDS - NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS
INCITS/ISO/IEC 18013-1 : 2005 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
INCITS/ISO/IEC 8484 : 2008 INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS
BS ISO/IEC 11693-3:2015 Identification cards. Optical memory cards Authentication techniques
MIL-HDBK-501 Base Document:1997 PORTABLE INFORMATION CARRIER
05/30142211 DC : DRAFT NOV 2005 ISO/IEC 15457-2 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE
CEI UNI ISO/IEC 11693-2 : 2010 IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES
INCITS/ISO/IEC 7816-1 : 2014 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
08/30175732 DC : DRAFT MAY 2008 BS ISO/IEC 11693-2 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES
06/30157189 DC : DRAFT OCT 2006 BS ISO/IEC 7816-2 - IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS
04/30110755 DC : DRAFT SEP 2004 ISO/IEC 18013-1 - PERSONAL IDENTIFICATION - ISO COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
01/648266 DC : DRAFT MAY 2001 ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CAN/CSA-ISO/IEC 10373-2:16 Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15)
CSA ISO/IEC 15457-3 : 2009 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CSA ISO/IEC 18013-1 : 2006 : R2017 INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO-COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET
NF ISO 13950 : 2007 PLASTICS PIPES AND FITTINGS - AUTOMATIC RECOGNITION SYSTEMS FOR ELECTROFUSION JOINTS
ISO/IEC 18328-2:2015 Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices
INCITS/ISO/IEC 15457-2 : 2001 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUES
ISO/IEC 15457-2:2007 Identification cards — Thin flexible cards — Part 2: Magnetic recording technique
BS ISO/IEC 18013-1:2005 Information technology. Personal identification. ISO-compliant driving licence Physical characteristics and basic data set
ISO/IEC 10373-2:2015 Identification cards Test methods Part 2: Cards with magnetic stripes
BS EN 753-3:1999 Identification card systems. Intersector thin flexible cards Test methods

ISO/IEC 10373-1:2006 Identification cards Test methods Part 1: General characteristics
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO/IEC 7810:2003 Identification cards Physical characteristics
ISO/IEC 10373-2:2015 Identification cards Test methods Part 2: Cards with magnetic stripes

View more information
€60.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.