ISO/IEC 7811-8:2014
Current
The latest, up-to-date edition.
Identification cards Recording technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
24-11-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/IEC 7811-8:2014 defines the characteristics for identification cards as defined in Clause 4 of this part of ISO/IEC 7811, and the use of such cards for international interchange.
ISO/IEC 7811-8:2014 specifies requirements for a 51,7 kA/m (650 Oe) magnetic stripe (including any protective overlay) on an identification card. The encoding technique and coded character sets are not defined, however, the specifications of ISO/IEC 78112 may be used. It takes into consideration both human and machine aspects and states minimum requirements.
Coercivity influences many of the quantities specified in this part of ISO/IEC 7811. It has a nominal value of 51,7 kA/m (650 Oe), but is not itself specified. Exposure of the card to a magnetic field is likely to destroy the recorded data.
ISO/IEC 7811-8:2014 provides criteria to which cards are to perform. No consideration is given within this International Standard to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria is negotiated between the involved parties.
ISO/IEC 103732 specifies the test procedures used to check cards against the parameters specified in this part of ISO/IEC 7811.
Numeric values in the SI and/or Imperial measurement system in this part of ISO/IEC 7811 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two are not to be intermixed or reconverted. The original design was made using the Imperial measurement system.
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO/IEC 7811-8 : 2021 | Identical |
| BS ISO/IEC 7811-8:2014 | Identical |
| NEN ISO/IEC 7811-8 : 2014 | Identical |
| INCITS/ISO/IEC 7811-8 : 2016 | Identical |
| INCITS/ISO/IEC 7811-8 : 2011 | Identical |
| GOST R ISO/IEC 7811-8 : 2011 | Identical |
| BS ISO/IEC 7816-1:2011 | Identification cards. Integrated circuit cards Cards with contacts. Physical characteristics |
| BS ISO/IEC 24789-2:2011 | Identification cards. Card service life Methods of evaluation |
| 10/30182317 DC : 0 | BS ISO/IEC 24789-2 - IDENTIFICATION CARDS - CARD SERVICE LIFE - PART 2: METHODS OF EVALUATION |
| UNI CEI ISO/IEC 11693-2 : 2010 | IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| CAN/CSA-ISO/IEC 10373-2:16 | Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15) |
| CAN/CSA-ISO/IEC 18328-2:16 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices (Adopted ISO/IEC 18328-2:2015, first edition, 2015-11-01) |
| BS ISO/IEC 18328-2:2015 | Identification cards. ICC-managed devices Physical characteristics and test methods for cards with devices |
| 13/30269784 DC : 0 | BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| ISO/IEC 11693-2:2009 | Identification cards Optical memory cards Part 2: Co-existence of optical memory with other machine readable technologies |
| 09/30213280 DC : 0 | BS ISO/IEC 7816-1 - IDENTIFICATION CARDS - INTEGRATED CARDS - CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
| ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| ISO/IEC 24789-2:2011 | Identification cards — Card service life — Part 2: Methods of evaluation |
| BS ISO/IEC 11693-2:2009 | Identification cards. Optical memory cards Co-existence of optical memory with other machine readable technology |
| ISO/IEC 18328-2:2015 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices |
| BS ISO/IEC 10373-2:2015 | Identification cards. Test methods Cards with magnetic stripes |
| CEI UNI ISO/IEC 11693-2 : 2010 | IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| INCITS/ISO/IEC 7816-1 : 2014 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
| 08/30175732 DC : DRAFT MAY 2008 | BS ISO/IEC 11693-2 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO/IEC 7811-2:2014 | Identification cards Recording technique Part 2: Magnetic stripe Low coercivity |
| ISO/IEC 7810:2003 | Identification cards Physical characteristics |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.