IEC 61076-3-101:1997
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
IEC 60874-10:1992
|
Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector type BFOC/2,5 |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements |
ISO 16750-2:2012
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
EN 300 019-1-3 : 2.4.1
|
ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-3: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT WEATHERPROTECTED LOCATIONS |
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV
|
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
SAE J1292 : 2008(S2016)
|
AUTOMOBILE AND MOTOR COACH WIRING |
ISO 16750-4:2010
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
IEC 62215-3:2013
|
Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
IEC 61753-1-1:2000
|
Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors) |
IEC 60807-3:1990
|
Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
IEC 61280-1-3:2010
|
Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
ASTM D 4728 : 2017 : REDLINE
|
Standard Test Method for Random Vibration Testing of Shipping Containers |
ISO/IEC 7498-1:1994
|
Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
ISO 16750-5:2010
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
IEC 60793-2-10:2017
|
Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
IEC 60794-2-11:2012
|
Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling |
IEC 60793-1-41:2010
|
Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
GR 487 CORE : ISSUE 5
|
GENERIC REQUIREMENTS FOR ELECTRONIC EQUIPMENT CABINETS |
ISO 7637-3:2016
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
ISO 16750-1:2006
|
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
IEC 60950:1999
|
Safety of information technology equipment |
IEEE 802.1AX-2014
|
IEEE Standard for Local and metropolitan area networks -- Link Aggregation |
IEC 61967-1:2002
|
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions |
TIA 568-0 : D2015 AMD 1 2017
|
GENERIC TELECOMMUNICATIONS CABLING FOR CUSTOMER PREMISES |
IEC 60793-1-4:2001
|
Optical fibres - Part 1-4: Generic specification - Measuring methods for transmission and optical characteristics |
IEEE 802-2014 REDLINE
|
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture |
IEC 60794-1:1996
|
Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1) |
IEC 60793-2:2015
|
Optical fibres - Part 2: Product specifications - General |
ISO/IEC 10165-2:1992
|
Information technology Open Systems Interconnection Structure of management information: Definition of management information |
IEC 60794-3-12:2012
|
Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
IEEE 802.1AS-2011
|
IEEE Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks |
ISO 8820-1:2014
|
Road vehicles Fuse-links Part 1: Definitions and general test requirements |
IEC 62132-4:2006
|
Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
TIA/EIA 455-204 : A2013
|
MEASUREMENT OF BANDWIDTH ON MULTIMODE FIBER |
MIL C 17 : G
|
CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
IEC 60874-2:1993
|
Connectors for optical fibres and cables - Part 2: Sectional specification for fibre optic connector - Type F-SMA |
TIA/EIA 455-180 : A1999(R2008)
|
MEASUREMENT OF THE OPTICAL TRANSFER COEFFICIENTS OF A PASSIVE BRANCHING DEVICE (COUPLER) |
ATIS 0600416 : 1999
|
NETWORK TO CUSTOMER INSTALLATION INTERFACES - SYNCHRONOUS OPTICAL NETWORK (SONET) PHYSICAL LAYER SPECIFICATION: COMMON CRITERIA |
TIA/EIA 568-2 : C2009 AMD 1 2016
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
ISO 7637-2:2011
|
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
TIA 455-95 : A2000(R2005)
|
FOTP-95 - ABSOLUTE OPTICAL POWER TEST FOR OPTICAL FIBERS AND CABLES |
IEC 60793-1:1992
|
Optical fibres - Part 1: Generic specification |
ISO/IEC 11801:2002
|
Information technology Generic cabling for customer premises |
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements |
ISO/IEC 10040:1998
|
Information technology Open Systems Interconnection Systems management overview |
ISO 10605:2008
|
Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
ISO/IEC 9646-2:1994
|
Information technology Open Systems Interconnection Conformance testing methodology and framework Part 2: Abstract Test Suite specification |
MIL C 24308 : C
|
CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
TIA 455-30 : B1991
|
FREQUENCY DOMAIN MEASUREMENT OF MULTIMODE OPTICAL FIBER INFORMATION TRANSMISSION CAPACITY |
IEC 61753-1:2007
|
Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
IEC 60793-1-42:2013
|
Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
IEEE 802.1D-2004
|
IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges |
TIA 455-175 : B2003
|
OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES CHROMATIC DEPRESSION |
ANSI INCITS 450 : 2009
|
INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-4 (FC-PI-4) |
TIA TSB 155 : A2010(R2014)
|
GUIDELINES FOR THE ASSESSMENT AND MITIGATION OF INSTALLED CATEGORY 6 CABLING TO SUPPORT 10 G BASE-T |
ISO/IEC 8824:1990
|
Information technology — Open Systems Interconnection — Specification of Abstract Syntax Notation One (ASN.1) |
ISO 20653:2013
|
Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access |
IEC 62132-1:2015
|
Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
CISPR 22:2008
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
IEEE 802.3.1-2013
|
IEEE Standard for Management Information Base (MIB) Definitions for Ethernet |
ISO/IEC TR 29125:2010
|
Information technology Telecommunications cabling requirements for remote powering of terminal equipment |
CISPR 25:2016
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
ECMA 97 : 1992
|
LOCAL AREA NETWORKS - SAFETY REQUIREMENTS |
IEC 61280-1-1:2013
|
Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
IEC 60721-2-1:2013
|
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
ATIS 0900105 : 2015
|
SYNCHRONOUS OPTICAL NETWORK (SONET) - BASIC DESCRIPTION INCLUDING MULTIPLEX STRUCTURE, RATES, AND FORMATS |
IEC 61753-021-2:2007
|
Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
ISO/IEC TR 24750:2007
|
Information technology Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T |
ISO 16750-3:2012
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
GR 468 CORE : ISSUE 2
|
GENERIC RELIABILITY ASSURANCE REQUIREMENTS FOR OPTOELECTRONIC DEVICES USED IN TELECOMMUNICATIONS EQUIPMENT |
ISO/IEC 15802-1:1995
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Common specifications Part 1: Medium Access Control (MAC) service definition |
TIA/EIA 568-3 : D2016
|
OPTICAL FIBER CABLING AND COMPONENTS STANDARD |
IEC 60874-1:2011
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
IEC 61280-4-1:2009
|
Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement |
IEC 61280-4-2:2014
|
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
IEC 60603-7:2008+AMD1:2011 CSV
|
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
IEC 61967-4:2002+AMD1:2006 CSV
|
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method |
IEC 61280-2-2:2012
|
Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement |
IEEE 802.1AB-2009
|
IEEE Standard for Local and Metropolitan Area Networks-- Station and Media Access Control Connectivity Discovery |
IEC 61753-022-2:2012
|
Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
TIA/EIA 455-54 : B1998(R2013)
|
MODE SCRAMBLER REQUIREMENTS FOR OVERFILLED LAUNCHING CONDITIONS TO MULTIMODE FIBERS |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
TIA TSB 184 : A2017
|
GUIDELINES FOR SUPPORTING POWER DELIVERY OVER BALANCED TWISTED-PAIR CABLING |
TIA/EIA 455-203 : A2009(R2014)
|
LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
TIA 526-14 : C2015
|
OPTICAL POWER LOSS MEASUREMENTS OF INSTALLED MULTIMODE FIBER CABLE PLANT |
IEC 62153-4-14:2012
|
Metallic communication cable test methods - Part 4-14: Electromagnetic compatibility (EMC) - Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method |
IEC 60793-2-50:2015
|
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
TIA/EIA TSB 67 : 1995
|
TRANSMISSION PERFORMANCE SPECIFICATIONS FOR FIELD TESTING OF UNSHIELDED TWISTED-PAIR CABLING SYSTEMS |
ISO/IEC 9646-1:1994
|
Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts |
ISO/IEC 9314-3:1990
|
Information processing systems Fibre distributed Data Interface (FDDI) Part 3: Physical Layer Medium Dependent (PMD) |
IEC 61754-7-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row |
IEC 60794-2:2017
|
Optical fibre cables - Part 2: Indoor cables - Sectional specification |
EN 300 019-1-4 : 2.2.1
|
ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-4: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS |
TIA/EIA 455-34 : A1995(R2002)
|
INTERCONNECTION DEVICE INSERTION LOSS TEST |
TIA 526-7 : A2015
|
MEASUREMENT OF OPTICAL POWER LOSS OF INSTALLED SINGLE-MODE FIBER CABLE PLANT |
TIA 455-127 : A2006(R2014)
|
FOTP-127-A - BASIC SPECTRAL CHARACTERIZATION OF LASER DIODES |
IEC 61196-1:2005
|
Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
ISO/IEC 7498-4:1989
|
Information processing systems Open Systems Interconnection Basic Reference Model Part 4: Management framework |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IEEE 1588-2008 REDLINE
|
IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems |
ISO/IEC 8802-2:1998
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 2: Logical link control |
IEC 61754-4:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
ISO 12103-1:2016
|
Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
ISO/IEC 10165-4:1992
|
Information technology Open Systems Interconnection Structure of management information Part 4: Guidelines for the definition of managed objects |
IEC 62149-1:2011
|
Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
IEC 61754-1:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
TIA 455-51 : A1991
|
PULSE DISTORTION MEASUREMENT OF MULTIMODE GLASS OPTICAL FIBER INFORMATION CAPACITY |
IEC 61754-7:2008
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family |
ISO 9314-2:1989
|
Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 2: Token Ring Media Access Control (MAC) |
TIA TSB 5021 : 2017
|
GUIDELINES FOR THE USE OF INSTALLED CATEGORY 5E AND CATEGORY 6 CABLING TO SUPPORT 2.5GBASE-T AND 5GBASE-T |
IEC 61000-4-21:2011
|
Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
TIA 526-4 : A1997
|
OPTICAL EYE PATTERN MEASUREMENT PROCEDURE |
ANSI INCITS TR 25 : 1999
|
INFORMATION TECHNOLOGY - FIBRE CHANNEL - METHODOLOGIES FOR JITTER SPECIFICATION |
IEC 61280-1-4:2009
|
Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method |
IEC 61076-3-103:2003
|
Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
TS 101 270-1 : 1.4.1
|
TRANSMISSION AND MULTIPLEXING (TM); ACCESS TRANSMISSION SYSTEMS ON METALLIC ACCESS CABLES; VERY HIGH SPEED DIGITAL SUBSCRIBER LINE (VDSL); PART 1: FUNCTIONAL REQUIREMENTS |
IEC 60793-1-48:2017
|
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |