JIS B 0021:1998
Current
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out
Available format(s)
PDF
Language(s)
English
Published date
31-03-1998
Publisher
€68.14
Excluding VAT
This Standard contains basic information for the geometrical tolerancing of workpieces. It represents the initial basis and describes the fundamentals for geometrical tolerancing. There are separate standards referenced in 2 and in Table 2 that provide more detailed information on geometrical tolerancing.
| DocumentType |
Standard
|
| Pages |
50
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO/DIS 1101:1996
|
| PublisherName |
Japanese Standards Association
|
| Status |
Current
|
Reaffirmed 2013 1998(R2013) [21/10/2013]1998(R2008) [01/10/2008]1998 [20/01/1998]1984 [01/02/1984]
| JIS B 0025:1998 | Technical drawings -- Geometrical tolerancing -- Positional tolerancing |
| JIS B 0022:1984 | Datums and datum-systems for geometrical tolerances |
| JIS B 0026:1998 | Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts |
| JIS B 0024:1988 | Technical drawings -- Fundamental tolerancing principle |
| JIS B 0023:1996 | Technical drawings -- Geometrical tolerancing -- Maximum material requirement and least material requirement |
| JIS B 4204:1998 | Milling cutters -- Cylindrical milling cutters |
| JIS C 8511:2004 | Alkaline primary batteries |
| JIS B 4107:1998 | Side milling cutters with brazed hardmetal tips |
| JIS B 7440-6:2004 | Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features Part 6: Estimation of errors in computing Gaussian associated features |
| JIS B 4214:1998 | Milling Cutters - Shell End Mills With Plain Bore And Tenon Drive |
| JIS B 8668:2006 | Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities |
| JIS B 0029:2000 | Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone |
| JIS B 6210:1998 | Table type horizontal boring and milling machines -- Testing for the accuracy |
| JIS B 6217:1998 | Horizontal spindle turret and single spindle automatic lathes -- Testing of the accuracy |
| JIS B 2292-3:2000 | Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 3: Polygonal flanges (including circular flanges) |
| JIS B 0721:2004 | Edge quality and its grades for material removal parts |
| JIS B 4433:1990 | Nut taps |
| JIS B 0027:2000 | Technical drawings -- Dimensioning and tolerancing of profiles |
| JIS B 8375-2:2007 | Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector |
| JIS B 7913:2007 | Optics and optical instruments -- Ancillary devices for geodetic instruments -- Tribrachs |
| JIS B 8375-1:2007 | Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector |
| JIS B 0672-2:2002 | Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature 製品の幾何特性仕様（ＧＰＳ）―形体―第２部：円筒及び円すいの測得中心線，測得中心面並びに測得形体の局部寸法 |
| JIS B 8436:2005 | Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates |
| JIS B 8664:2008 | Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces |
| JIS B 0090-12:2001 | Preparation of drawings for optical elements and systems -- Part 12: Aspheric surfaces |
| JIS B 4221:1998 | Milling cutters -- Angle milling cutters |
| JIS B 6222:1998 | Floor type horizontal boring machines -- Testing for the accuracy |
| JIS C 5562:1996 | Magnetic tape sound recording and reproducing systems Part 1: General conditions and requirements |
| JIS B 4405:1998 | Reamers -- Hand reamers |
| JIS B 4115:1998 | Hardmetal slitting saws |
| JIS R 6240:2008 | Testing methods of grinding wheels |
| JIS B 7506:2004 | Gauge blocks |
| JIS B 8032-13:1998 | Internal combustion engines -- Small diameter piston rings -- Part 13: Expander/segment oil control rings |
| JIS B 8667:2004 | Hydraulic fluid power -- Pressure switches -- Mounting surfaces |
| JIS B 0022:1984 | Datums and datum-systems for geometrical tolerances |
| JIS B 4236:1998 | Milling cutters -- Counterbores for hexagon socket head bolts |
| JIS B 6220:1999 | External cylindrical centreless grinding machines -- Testing of the accuracy |
| JIS B 6064-2:2007 | Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions |
| JIS B 0621:1984 | Definitions and designations of geometrical deviations |
| JIS B 2292-2:2005 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series |
| JIS B 0004:2007 | Technical representation of springs |
| JIS B 0025:1998 | Technical drawings -- Geometrical tolerancing -- Positional tolerancing |
| JIS C 5401-1:2005 | Connectors for electronic equipment -- Part 1: Generic specification Part 1: Generic specification |
| JIS B 2711:2005 | Shot peening |
| JIS B 6064-1:2007 | Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions |
| JIS B 4407:1998 | Arbors for shell reamers |
| JIS B 0026:1998 | Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts |
| JIS C 8515:2007 | Primary batteries -- Physical and electrical specifications |
| JIS B 8441:2005 | Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts |
| JIS B 0090-6:2001 | Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances |
| JIS B 6340:1992 | Machining centers -- Dimensions of spindle noses |
| JIS B 4213:1996 | Tapered end mills for trapeziform runner with parallel shanks |
| JIS B 0001:2000 | Technical drawings for Mechanical Engineering |
| JIS B 1021:2003 | Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C Part 1: Bolts, screws, studs and nuts - Product grades A, B and C |
| JIS B 4210:1997 | Tapered end mills |
| JIS B 8666:2001 | Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces |
| JIS B 8357:2000 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces |
| JIS B 4220:1988 | Screw slotting cutters |
| JIS C 8501:2004 | Carbon zinc batteries |
| JIS L 5133:1998 | Sliver cans and cans spring |
| JIS B 8400-1:2003 | Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector Part 1: Mounting interface surfaces without electrical connector |
| JIS B 6252:2004 | Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 4: Planer type machines with movable column |
| JIS B 3402:2000 | Drawing practices for mechanical engineering by CAD |
| JIS B 0023:1996 | Technical drawings -- Geometrical tolerancing -- Maximum material requirement and least material requirement |
| JIS B 2292-1:2005 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units |
| JIS E 5302:1988 | Propeller shafts for railway rolling stock |
| JIS Z 8310:1984 | Technical drawing -- General code of drawing practice |
| JIS B 6223:1998 | Vertical turning and boring lathes -- Testing of the accuracy |
| JIS E 4502-2:2001 | Axles for railway rolling stock -- Dimensional requirements |
| TR B 0003:1998 | Technical drawings -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out -- Verification principles and methods -- Guidelines |
| JIS B 4232:1996 | Involute gear milling cutters |
| JIS B 1022:2008 | Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.