JIS B 3502:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Programmable controllers - Equipment requirements and tests
Hardcopy , PDF
23-12-2016
Japanese, English
20-06-2004
This Standard specifies requirements and related tests for programmable controllers (PLCs) and their associated peripherals [for example, programming and debugging tools (PADTs), human-machine interfaces (HMIs), etc.] which have as their intended use the control and command of machines and industrial processes. PLCs and their associated peripherals are intended to be used in an industrial environment and may be provided as open or enclosed equipment. If a PLC or its associated peripherals are intended for use in other environments, then the specific requirements, standards and installation practices for those other environments must be additionally applied to the PLC and its associated peripherals. This Standard also applies to any products performing the function of PLCs and/ or their associated peripherals. Equipment covered in this Standard is intended for use in overvoltage category II (see IEC 60664-1) in low-voltage installations, where the rated mains supply voltage does not exceed a.c. 1 000 V r.m.s. (50/60 Hz), or d.c. 1 500 V. (If PLCs or their associated peripherals are applied in overvoltage category III installations, then additional analysis will be required to determine the suitability of the equipment for those applications.) This Standard does not deal with the functional safety or other aspects of the overall automated system. PLCs, their application programme and their associated peripherals are considered as components of a control system. Since PLCs are component devices, safety considerations for the overall automated system including installation and application are beyond the scope of this Standard. However, PLC safety as related to electric shock and fire hazards, electrical interference immunity and error detecting of the PLC-system operation (such as the use of parity checking, self-testing diagnostics, etc.), are addressed. Refer to JIS C 0364 series or applicable national/local regulations for electrical installation and guidelines. The
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy |
| JIS C 8201-5-1:2007 | Low-voltage Switchgear And Controlgear - Part 5-1: Control Circuit Devices And Switching Elements - Electromechanical Control Circuit Devices |
| JIS C 1000-4-3:1997 | Electromagnetic Compatibility (emc) - Part 4: Testing And Measurement Techniques - Section 3: Radiated, Radio-frequency, Electromagnetic Field Immunity Test |
| JIS C 60068-2-31:1995 | Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens |
| JIS C 0704:1995 | Insulation test for control gear |
| JIS C 0920:2003 | Degrees of protection provided by enclosures (IP Code) |
| JIS C 2134:2007 | Method For The Determination Of The Proof And The Comparative Tracking Indices Of Solid Insulating Materials |
| JIS C 60068-2-32:1995 | Environmental testing Part 2: Tests. Test Ed: Free fall |
| JIS C 61000-4-5:1999 | Electromagnetic Compatibility (emc) - Part 4: Testing And Measurement Techniques - Section 5: Surge Immunity Test |
| JIS C 6950:2006 | Safety Of Information Technology Equipment |
| JIS C 0066:2001 | Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
| JIS C 60050-161:1997 | International Electrotechnical Vocabulary: Electromagnetic Compatibility |
| JIS B 3503:1997 | Programmable Controllers - Programming Languages |
| JIS C 61000-4-2:1999 | Electromagnetic Compatibility (emc) - Part 4: Testing And Measurement Techniques - Section 2: Electrostatic Discharge Immunity Test |
| JIS B 3500:1990 | Glossary of terms used in programmable controller |
| JIS B 3501:2004 | Programmable controllers - Part 1: General information |
| JIS C 8201-5-2:1999 | Low-voltage Switchgear And Controlgear - Part 5: Control Circuit Devices And Switching Elements - Section 2: Proximity Switches |
| JIS C 0364-1:1999 | Electrical Installations Of Buildings - Part 1: Scope, Object And Fundamental Principle |
| JIS C 61000-4-4:2007 | Electromagnetic Compatibility (emc) - Part 4-4: Testing And Measurement Techniques - Electrical Fast Transient/burst Immunity Test |
| JIS C 1010-1:2005 | Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements |
| JIS C 61000-4-6:2006 | Electromagnetic Compatibility (emc) - Part 4-6: Testing And Measurement Techniques - Immunity To Conducted Disturbances, Induced By Radio-frequency Fields |
| JIS B 3501:2004 | Programmable controllers - Part 1: General information |
| JIS B 9704-1:2006 | Safety of machinery - Electro-sensitive protective equipment Part 1: General requirements and tests |
| JIS B 3512:1999 | Programmable Controllers - Test And Verification Of Field Network Standard (level 1) |
| JIS TR B0004:1998 | Programmable Controllers - User Guidelines |
| JIS B 9960-32:2004 | Safety of machinery - Electrical equipment of machines Part 32: Requirements for hoisting machines |
| JIS B 3503:1997 | Programmable Controllers - Programming Languages |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.