JIS B 9960-1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety Of Machinery - Electrical Equipment Of Machines - Part 1: General Requirements
Hardcopy , PDF
30-06-2020
English, Japanese
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.Introduction1 Scope2 Normative references3 Terms and definitions4 General requirements5 Connection of incoming power supply conductors, disconnectors and devices for switching off6 Protection against electric shock7 Protection of equipment8 Equipotential bonding9 Control circuits and control functions10 Operator interface and machine-mounted control devices11 Controlgear: location, mounting, and enclosures12 Conductors and cables13 Wiring14 Electric motors and associated equipment15 Accessories and lighting16 Marking, warning signs and reference designations17 Technical documentation18 VerificationAnnex A (normative) - Protection against direct contact in TN earthing systemsAnnex B (informative) - Enquiry form for electrical equipment of machinesAnnex C (informative) - Examples of machines covered by this StandardAnnex D (informative) - Current-carrying capacity and overcurrent protection of conductors and cables in the electrical equipment of machinesAnnex E (informative) - Explanation of emergency operation functionsAnnex F (informative) - Guide for the use of this standardAnnex G (Informative) - Comparison of cross-sectional areas of typical conductorAnnex JA (normative) - Protection against indirect contact in TT earthing systemsAnnex JB (informative) - Corresponding between aspects and clauses this Standard specifiesAnnex JC (informative) - Degrees of protection provided by enclosuresAnnex JD (informative) - Class of electrical equipment (classification by protection against electric shock)Annex JE (informative) - Conductor class of for insulated cableAnnex JF (informative) - Relationship between this Standard and JIS C 60364 seriesAnnex JG (informative) - Permissible current of 600 V polyvinyl chloride insulated wires specified in JIS C 3307Annex JH (informative) - BibliographyAnnex JI (informative) - Comparison table between JIS and corresponding International Standard
Describes the requirements and recommendations to achieve the matters relating to the electrical equipment of machines.
| DocumentType |
Standard
|
| Pages |
150
|
| ProductNote |
NEW CHILD AMD 1 2011 IS NOW ADDED
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
2008 AMD 1 2011 [01/08/2011]2008 [25/05/2008]1999(R2004) [20/11/2004]1999 [20/07/1999]
| JIS C 60364-6-61:2006 | Electrical Installations Of Buildings - Part 6-61: Verification - Initial Verification |
| JIS C 8201-3:2001 | Low-voltage Switchgear And Controlgear - Part 3: Switches, Disconnectors, Switch-disconnectors And Fuse-combination Units |
| JIS C 8201-1:2007 | Low-voltage Switchgear And Controlgear - Part 1: General Rules |
| JIS C 0365:2007 | Protection Against Electric Shock - Common Aspects For Installation And Equipment |
| JIS B 9703:2000 | Safety of machinery - Emergency stop - Principles for design |
| JIS B 9705-1:2000 | Safety of machinery - Safety related parts of control systems Part 1: General principles for design |
| JIS C 8201-2-2:2004 | Low-voltage switchgear and controlgear Part 2-2: Circuit-breakers incorporating residual current protection |
| JIS B 9706-1:2001 | Safety of machinery - Indication, marking and actuation Part 1: Requirements for visual, auditory and tactile signals |
| JIS C 60364-4-41:2006 | Electrical Installations Of Buildings - Part 4-41: Protection For Safety - Protection Against Electric Shock |
| JIS B 9706-3:2001 | Safety of machinery - Indication, marking and actuation Part 3: Requirements for the location and operation of actuators |
| JIS C 0447:1997 | Man-machine Interface (mmi) - Actuating Principles |
| JIS C 0445:1999 | Identification Of Equipment Terminals And Of Terminations Of Certain Designated Conductors, Including General Rules For An Alphanumeric System |
| JIS C 0920:2003 | Degrees of protection provided by enclosures (IP Code) |
| JIS C 4034-5:1999 | Rotating Electrical Machines - Part 5: Classification Of Degrees Of Protection Provided By Enclosures Of Rotating Electrical Machines (ip Code) |
| JIS C 4212:2000 | Low-voltage three-phase squirrel-cage high efficiency induction motors |
| JIS C 1082-4:1999 | Preparation Of Documents Used In Electrotechnology - Location And Installation Documents |
| JIS C 1082-2:1999 | Preparation Of Documents Used In Electrotechnology - Function-oriented Diagrams |
| JIS C 4034-1:1999 | Rotating Electrical Machines - Part 1: Rating And Performance |
| JIS C 1082-1:1999 | Preparation Of Documents Used In Electrotechnology - General Requirements |
| JIS C 0457:2006 | Preparation Of Instructions - Structuring, Content And Presentation |
| JIS C 8285-1:2007 | Plugs, Socket-outlets And Couplers For Industrial Purposes - Part 1: General Requirements |
| JIS C 1082-3:1999 | Preparation Of Documents Used In Electrotechnology - Connection Diagrams, Tables And Lists |
| JIS C 60364-5-54:2006 | Electrical Installations Of Buildings - Part 5-54: Selection And Erection Of Electrical Equipment - Earthing Arrangements, Protective Conductors And Protective Bonding Conductors |
| JIS C 8201-5-1:2007 | Low-voltage Switchgear And Controlgear - Part 5-1: Control Circuit Devices And Switching Elements - Electromechanical Control Circuit Devices |
| JIS C 0452-2:2005 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations Part 2: Classification of objects and codes for classes |
| JIS C 0452-1:2004 | Industrial System, Installations And Equipment And Industrial Products - Structuring Principles And Reference Designations - Part 1: Basic Rules |
| JIS C 4203:2001 | Single phase induction motors for general purpose |
| JIS C 0448:1997 | Coding Of Indicating Devices And Actuators By Colours And Supplementary Means |
| JIS C 60364-5-52:2006 | Electrical Installations Of Buildings - Part 5-52: Selection And Erection Of Electrical Equipment - Wiring Systems |
| JIS C 4210:2001 | Low-voltage three-phase squirrel-cage induction motors for general purpose |
| JIS C 2811:1995 | Terminal blocks for industrial and similar use |
| JIS C 60364-5-53:2006 | Electrical Installations Of Buildings - Part 5-53: Selection And Erection Of Electrical Equipment - Isolation, Switching And Control |
| JIS B 9706-2:2001 | Safety of machinery - Indication, marking and actuation Part 2: Requirements for marking |
| JIS C 8201-2-1:2004 | Low-voltage Switchgear And Controlgear - Part 2-1: Circuit-breakers |
| JIS B 9700-1:2004 | Safety of machinery - Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| JIS B 9700-2:2004 | Safety of machinery - Basic concepts, general principles for design Part 2: Technical principles |
| JIS C 60364-4-43:2006 | Electrical Installations Of Buildings - Part 4-43: Protection For Safety - Protection Against Overcurrent |
| JIS B 9961:2008 | Safety Of Machinery - Functional Safety Of Safety-related Electrical, Electronic And Programmable Electronic Control Systems |
| JIS C 0664:2003 | Insulation Coordination For Low-voltage Equipment - Principles, Requirements And Tests |
| JIS C 0453:2005 | Preparation of parts lists |
| JIS A 8508-5:2008 | Mobile Road Construction Machinery - Safety - Part 5: Specific Requirements For Floor Cutting Machines |
| JIS B 9706-2:2001 | Safety of machinery - Indication, marking and actuation Part 2: Requirements for marking |
| JIS B 8460:2002 | Pcb (printed Circuit Board) Assembly Robots - Presentation Of Characteristics And Functions |
| JIS C 0457:2006 | Preparation Of Instructions - Structuring, Content And Presentation |
| JIS A 8508-4:2006 | Mobile Road Construction Machinery - Safety - Part 4: Requirements For Compaction Machines |
| JIS B 9655:2004 | Design Rules For Safety And Sanitation Of Processing Machinery Used In Flouring Mill |
| JIS B 6015:2005 | Machine Tools - Electrical Equipment - General Requirements |
| JIS B 9653:2003 | Design Rules For Safety And Sanitation Of Meat Processing Machinery |
| JIS A 8613:2008 | Safety requirements for concrete mixers and plants |
| JIS B 9712:2006 | Safety of machinery - Two-hand control devices - Functional aspects and design principles |
| JIS B 9650-1:2003 | General Design Rules For Safety And Sanitation Of Food Processing Machinery - Part 1: General Design Rules For Safety |
| JIS A 8509-1:2007 | Foundation Work Machinery - Safety - Part 1: Requirements For Piling Equipment |
| JIS B 9703:2000 | Safety of machinery - Emergency stop - Principles for design |
| JIS B 9706-1:2001 | Safety of machinery - Indication, marking and actuation Part 1: Requirements for visual, auditory and tactile signals |
| JIS B 9960-11:2004 | Safety of machinery -- Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV |
| JIS B 9654:2005 | Design Rules For Safety And Sanitation Of Marine Product Machinery |
| JIS B 9704-1:2006 | Safety of machinery - Electro-sensitive protective equipment Part 1: General requirements and tests |
| JIS B 9656:2005 | Design Rules For Safety And Sanitation Of Noodle Making Machinery |
| JIS B 9652:2005 | Design Rules For Safety And Sanitation Of Cake Making Machinery |
| JIS B 9700-2:2004 | Safety of machinery - Basic concepts, general principles for design Part 2: Technical principles |
| JIS A 8340-1:2004 | Earth-moving machinery - Safety Part 1: General requirements |
| JIS B 9705-1:2000 | Safety of machinery - Safety related parts of control systems Part 1: General principles for design |
| JIS B 8462:2000 | Pcb (printed Circuit Board) Assembly Robots - Safety |
| JIS C 0364-7-740:2005 | Electrical Installations Of Buildings - Part 7-740: Requirements Of Special Installations Or Locations - Temporary Electrical Installations For Structures, Amusement Devices And Booths At Fairgrounds, Amusement Parks And Circuses |
| JIS A 8612:2006 | Conveying, Spraying And Placing Machines For Concrete And Mortar - Safety Requirements |
| JIS A 8508-1:2006 | Mobile Road Construction Machinery - Safety - Part 1: Common Requirements |
| JIS B 9631:2005 | Graphic Technology - Safety Requirements For Printing Press Systems |
| JIS B 8415:1982 | General safety code for industrial combustion furnaces |
| JIS B 9650-2:2003 | General Design Rules For Safety And Sanitation Of Food Processing Machinery - Part 2: General Design Rules For Sanitation |
| JIS B 8461:2002 | Pcb (printed Circuit Board) Assembly Robots - Interfaces |
| JIS B 9714:2006 | Safety of machinery - Prevention of unexpected start-up |
| JIS B 8942:2004 | Automated storage and retrieval system - General specifications |
| JIS A 8611:2004 | Building construction machinery and equipment - External vibrators for concrete |
| JIS B 9961:2008 | Safety Of Machinery - Functional Safety Of Safety-related Electrical, Electronic And Programmable Electronic Control Systems |
| JIS B 9657:2004 | Design Rules For Safety And Sanitation Of Drink Making Machinery |
| JIS B 9658:2004 | Design Rules For Safety And Sanitation Of Rice And Wheat Milling Machinery |
| JIS C 0364-7-717:2008 | Electrical Installations Of Buildings - Part 7-717: Requirements For Special Installations Or Locations - Mobile Or Transportable Units |
| JIS A 8202-1:2007 | Tunnelling Machines - Safety - Part 1: Requirements For Shield Machines And Horizontal Thrust Machines |
| JIS B 9702:2000 | Safety of machinery - Principles of risk assessment |
| JIS A 8202-2:2007 | Tunnelling Machines - Safety - Part 2: Requirements For Partial Face Tunnelling Machines |
| JIS B 9716:2006 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| JIS B 8433-1:2007 | Robots For Industrial Environments - Safety Requirements - Part 1: Robot |
| JIS A 4721:2005 | Automatic revolving doors - Safety |
| JIS B 9710:2006 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| JIS TS B62046:2006 | Safety Of Machinery - Application Of Protective Equipment To Detect The Presence Of Persons |
| JIS B 9706-3:2001 | Safety of machinery - Indication, marking and actuation Part 3: Requirements for the location and operation of actuators |
| JIS B 9700-1:2004 | Safety of machinery - Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| JIS B 9651:2005 | Design Rules For Safety And Sanitation Of Baking Machinery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.